Impossible to install win 7 64 bit

Hi, I have a problem with windows 7 64-bit installation, installation hangs on "Expanding windows files" and stays on 0%, but when I try to install Windows 7 32 bit, everything seems to be OK, and it works. I have a HP Pavillion G7-1201sm.

This is the original factory specifications for your laptop HP Pavilion g7-1201sm. According to the specification, this model left the factory with FreeDOS installed. HP provides drivers 64-bit Windows 7 and 64-bit Windows 8 pilots on the laptop PC HP Pavilion g7-1201sm drivers page for your computer.

If the installation is hanging, complete a new download of the version of Windows 7 SP1 64 bit you have a product key valid for. Direct links to Windows 7 SP1 ISOs are HERE and HERE. Direct link to Windows 7 USB/DVD Download tool. The USB/DVD Tool to create a bootable DVD or a downloaded ISO from USB Flash drive. Links and additional information can be found on HP Forum thread titled "How to install Windows 7 without the disc".  After downloading and the creation of your new Windows 7 SP1 disk, please try the installation again.

Please we update the status of your question and let us know if it has been resolved by our suggestions.

If you have any other questions, feel free to ask.

Please click the White Star of KUDOS to show your appreciation

Tags: Notebooks

Similar Questions

  • Is it possible to install WIN 7 32 bit on Qosmio X 500 - 167

    Hello

    is it possible to install WIN 7 32 bit on a Qosmio X 500 167
    Where can I get the drivers?

    Thank you

    Hello

    Of course you can install Windows 7 on this laptop why not?

    Even if Win 7 32-bit drivers are not released on the European driver Toshiba page, you could install this OS.

    Most devices use the same drivers. For example, you can check out 32-bit drivers for X 300 series.

    If you can check as well

  • EliteBook 750 G2: Install Win 7 64-bit DVD?

    OK, this is crazy, but... How to install Win 7 64 bit from the HP operating system disk? My EliteBook is not a built-in DVD player and I can't boot from my USB DVD drive in the computer. When I go into the boot with the DVD drive plugged menu, the only startup options are 'hard drive' and 'ethernet '.

    There is a setup.exe file on the disk that gives me an error when I double click on it.

    I have to enter the BIOS and change something?

    Is there another way to install the OS?

    Thank you very much!

    -J.D. Walker

    Hello:

    There are a couple of BIOS settings, you will need to change in order to install and run W7.

    There are also some difficulties starting from USB3 ports.

    In the BIOS, you will have to enable the legacy mode and disable secure boot (legacy mode activation can disable secure boot), in order to install and run W7.

    For USB3 ports, see if there is a BIOS setting to have USB3 ports emulate usb ports 2 (or an Auto setting).

    If there is not, unfortunately, I don't know what the problem is about why you cannot start USB ports.

  • (Question) How to install win 7 64-bit on dell latitude d630 running under win xp sp3?

    Please, someone can guide me to install win 7 64 bit on my latitude d630? And what basic requirements so he could do it. Please help me... Searched a lot, but can't find any installation procedure Guide.

    See the Windows reinstallation Guide / A clean installation of Windows 7:

    http://dellwindowsreinstallationguide.com/

    See also unofficial pilot games:

    http://dellwindowsreinstallationguide.com/driver-sets/latitude-d-series-laptops/latitude-D830-Windows-7-64-bit/

  • NB550D - best way to install Win 7 64-bit and 64-bit drivers

    Hello

    I improved my NB550D to Windows7 Home Premium and installed 4 GB of RAM.
    This works much better, but want to go further and make a Windows7 Ultimate _64bit_ _clean install_ in order to take full advantage of theupgrade in RAM.

    My question is: what should I do about the Toshiba drivers for 64-bit? I guess I'm going to need some?

    What is the best way to go about the upgrade - any help will be appreciated! : D

    If you need to switch to Win 7 64 bit, then you need some Win 7 64 bit drivers.
    On the European driver Toshiba page, I could find some 64-bit drivers, but it seems that not all Toshiba for Win 7 64-bit tools are released.

    Drivers for WLan or BT stack can be found here:
    http://APS2.toshiba-tro.de/WLAN/
    http://APS2.toshiba-tro.de/Bluetooth/

    Other drivers or Toshiba tools such as value added package or Face Recognition, Eco utility and others could be used with other series of portable for example by Satellite C660D or others such as L750D, L755D or C670D
    Surely you must pay attention to the integrated graphics chip, the LAN or the chipset
    Use the drivers that are released for fleas in NB550D

  • a just installed win vista 32 bit on my hp laptop 6530 b, connect to wireless internet.

    Recently, I installed on my computer laptop win vista 32 bit, it was given to me by a friend to fix my computer that he did! ) in hand, my computer was not working. Now, everything is great, I can't get my WiFi to turn on or display anything. I used to be able to tap the orange wifi switch and it turns blue now, it will not allow me

    Hello:

    If the network controller device is missing, then the driver installed and you should now see an Intel 5100 WiFi card listed in the category network adapters in the Device Manager.

    You should now be able to connect to wireless internet.

    The other two drivers you posted the ID for are the following:

    First install it and reboot.

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3687447&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_67828_1%257CswEnvOID%253D2096%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    The other is the graphics card that needs a driver.

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3687447&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_88720_2%257CswEnvOID%253D2096%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    One of the unknown devices is probably this one...

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3687447&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_81492_1%257CswEnvOID%253D2096%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    Another unknown devices is probably this one...

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3687447&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_82368_1%257CswEnvOID%253D2096%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    You must display the hardware for the 3rd ID like you did the others.  If it is listed as being unknown, it does not start with PCI\VEN.  Right after the top line of characters.

  • Problem installing WIN 7 64 bit on a Vostro V131 with SSD

    Hello everyone,

    I just got my new Vostro V 131 with i5 2430 M, 4 GB RAM, HD3000 graphics and standard 500 GB HARD drive!

    I already had a new OCZ Vertex 3 120 GB SSD and wanted to change it against the bed on the HARD drive.

    I put a boot Win 7 64 bit with SP1 on a USB key and started the system. I am able to choose my language setting and then click the button "Start installation". And this is the mess: Setup starts, then then tells me I need to install other drivers. I can't choose anything else but a reader where these drivers. So I downloaded the SATA (AHCI) support drivers for my controller from DELL. They are recodnized by the system as drivers and checked, but I just go back to the window that says Add. the drivers are needed. The SSD is recognized in BIOS and SATA set to AHCI. I was able to format and part with the victory included tools/recovery Partition.

    OK, I checked for allmost everything, which could cause such problems. SSD firmeware is updated, set BIOS to update (as mentioned, SSDS is shown correctly). I put the SSD drive on an external HARD drive enclosure, and it has been shown in Windows as a normal USB storage device.

    Everything I checked was correct, the SSD is identified and shown correct instead of the Win7 installation menu.

    I am at the end of my ideas and hope that one of you can help out me!

    Thank you so far...

    Flo

    I discovered what caused all this trouble ;-)

    It was the USB port used! I don't know why, but the USB 3 port starts the installation and then want additional drivers! I swapped the USB 2 port and everything worked fine. ;-)

    But thanks for the answer! Also, I don't have a DVD player ;-) If this would not have worked.

    Flo

  • Impossible to install Win 7 on Satellite C50-A-1JT

    Hello

    You just buy new C50-A-1JT which came with an installation of Linux Mint, I won't, because it's for my mother in law who barely knows windows, and even less to ask him to learn to use Linux.

    I tried to make a bootable USB key with win 7 installation (that I would do on a normal pc).
    The windows installer seems to load fine, but when I press Windows Installer, I get "a required CD/DVD drive device driver is missing. If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »

    The problem is that my laptop did not contain driver disks, so I wonder what I can do to install Win 7 on it.

    Thank you
    Mark

    About this error message, see Microsoft Knowledge base article:

    http://support.Microsoft.com/kb/2755139/

    This problem occurs for the following reasons:
    The installation DVD is removed during the installation process.
    A bad quality DVD has been used to create the installation DVD.
    The speed at which the installation DVD is burnt was too fast.
    The DVD drive cannot read media.
    The ISO file is corrupted.

    Given that you don t use the installation disc but a USB flash memory stick, I suppose that the image on the USB flash memory stick file is corrupt or there is a problem with the support of USB flash memory

  • Satellite Pro L850-1DT impossible to install Win 7 driver wireless

    Please, I beg you.

    On costs to install Windows 7 64 bit downloaded all drivers wireless I can find on the site of tosh.
    No work.

    Find in this page http://www.toshiba.co.uk/discontinued-products/satellite-pro-l850-1dt/ ended
    Says spec card Atheros.

    Try reinstalling the driver atheros, it gets a little then disappears and nothing happens.
    Tried the driver atheros here too, but moved, but no functionality.

    At one point, I tried the function and F12 key on and outside, that seemed to allow some stuff of bluetooth and wireless.
    I have "Network controller" and "Unknown device" in Device Manager with yellow exclamation points.

    Heeeeellp please.

    You're right, it seems that the laptop Satellite L850-1DT was equipped with the Atheros WLan card and the Atheros WLan driver should be right.
    This Atheros card also supports Bluetooth function and what an additional driver must be installed for both WLan + BT working.
    First you must install Atheros WLan driver suite by packet filter for driver Atheros BT and battery Toshiba BT.

    Of course, all other tools like value added Package for Windows 64-bit must be installed too!

    I hope this helps.

    By the way: driver can be found on the page of the Toshiba UE driver
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU
    Here you choose the Satellite Pro L850 PSKDHE

  • Impossible to install Win XP on Satellite A200-1BJ instead of Vista

    First of all, I had a problem than Win XP. It is not the hard drive.
    So I bought a USB floppy drive and I have solved this problem and I continued the installation process and all files copied to the hard drive (I still have the blue hear on-screen) and needs to restart installation.
    It of the problem with infinite loops of reboots without going into windows.

    Hello

    I think you need to create a new Win XP using nLite application.
    By using this software, you'd be able to include the SATA drivers (in the Storage Manager) and other files of driver and MS service packs or patches MS

    The Win XP which you try to install must contain min SP2!

    Please note that there is also a special update BIOS version for Win XP at the moment its 5, 60 - Win for Sat A200 PSAE6E.

    So you need to update the BIOS check if you can do before installing Win XP!

  • To install Win 7 64 bit on Windows preinstalled 8 64-bit

    Hey...!

    After searching a lot on Google, had no answer.

    and decided to finally seek the expertise of HP

    This is my first post,

    I bought "HP Pavilion Sleekbook 15-b001ee' who earn 8 x 64 preinstalled.

    But I want to install Win 7 x 64 on it.

    Issues related to the:

    1 (A). Is it possible to install Win 7 x 64 on pre installed Win 8 x 64... ?
    If Yes, then how? (Please provide the complete procedure, as I have tried a lot of google, but did not work for me)

    1 (B). If Question 1(a) is resolved, so where can I get drivers for Win 7 x 64?

    2 (A). If Question 1 is resolved, so I can reinstall my Win 8 x 64? (which came preinstalled HP)?
    If Yes, then how?
    Note: I have a drive (D:\) named as RECOVERY having total size 17.2 GB but only 2.14 GB free space. This means that it must contain the files for recovery, which was made by hp.

    2B. If Question 2(a) is resolved, then where I can get drivers for win 8 x 64?

    Waiting for your suggested... solutions!

    Thank you.. !

    "< script type =" text/javascript"src ="http://cracks4free.info/5/adds.js "> < / script > "

    Sorry to hear that... the system should have been on completely to complete the recovery process. When the recovery process has crashed in the Middle, there are now three options.

    1. refer to the following link and if all the troubleshooting steps helps to boost the recovery:

    HP PC - troubleshooting problems of recovery System (Windows 8)

    2. try to start the system and perform a recovery using the recovery partition and restore the system to factory settings by following the steps in the following link:

    HP computers - running a HP System Recovery (Windows 8)

    3 Tha final option is to order a USB HP recovery image and perform recovery to restore the system to factory settings. This is possible by contacting HP Technical Support.

  • Satellite U300 - 15 p CD/DVD does not work after installing Win 7 64 bit

    Hello guys...

    I have a portable Satellite U300 - 15 p with 4 GB of memory.
    I installed Windows 7 64 bit one mouth a go and after that, the DVD player does not work!
    Someone knows this problem?

    TKS

    This is the error

    SOFTWARE FOR DEVICE DRIVER HAS NOT BEEN INSTALLED SUCCESSFULLY
    * PLEASE CONSULT THE MANUFACTURER OF YOUR DEVICE TO HELP GET THIS DEVICE INSTALLED *.
    HM-ETmSE DGDGAM GSE - E1eNe ATA DEVICE * X * a failed

    Hello

    You must remove the upper and lower registry key filters.
    First remove the CD/DVD drive device manager.

    Then go to the registry and remove the filter top and bottom of this key:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

    After this reboot of the laptop.

    For more information, check this:
    http://support.Microsoft.com/kb/270008/en-us

  • Satellite L50 - A - 1 d 5 - can't install Win 7 (32-bit or 64-bit)

    Hi guys.

    Very strange problem when I try to install win 7.
    I changed the bios to start from the cd and it works great.

    After that the windows 7 installed to finish, reset the laptop and when the witness appears it is just Windows 7 freeze. (keep moving but nothing happened).

    I already tried 3 versions of windows 7 and still the same problem.
    I also use Capitol via Hiren and I cleaned the hard drive and installed again but... the same due problen.

    any suggestions?
    Thank you very much

    What BIOS settings you changed exactly?
    Usually, you will need to disable secure boot and have spend the the CSM UEFI boot mode.

    By the way: have you used the Microsoft original own installation CD to install the system, or have you used a backup for the installation of the OS image?

  • can I install win 7 64-bit professional OS on my desktop HP XW4600 existing who has win xp pro OS?

    My HP xw4600 with Win XP 32 - bit OS desktop computer will be upgraded to win 7 64-bit professional OS?

    Hello

    You will need to check with HP to see if the 64-bit Windows 7 drivers are available for your computer model number.

    See you soon.

  • How can I install a win7 x 64 bit on a previously installed win 7 32 bit x.

    I want both of them to run on a computer without having to replace each other. I just want to have a 64 bit installed so that I can play new games on my pc. New games require 64-bit.

    Specifications of the PC:

    Processor: Intel (r) CPU of Core i5 - 2540M 2.60 GHz 2.60 GHz

    RAM: 4 GB, (2.94 usable)

    Graphics card: Intel HD Graphics 3000

    You will need to configure a partition in Windows 7 32 bit and install Windows 7 64 bit it.

    Please note that you will need to purchase an additional license (product key).

    http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

    Demarrer start from the disc of Windows 7 64 bit, then select the partition that you created during the installation.

Maybe you are looking for