Impossible to open the defragmentation, get error Defrag - mmc.exe - bad image

Similar Questions

• Upgrade Windows 10: error called "LogonUI.exe - bad Image C:\Windows\system32\LMIinit.dll.

  I have a Windows 7 Fujitsu Lifebook (5 years). I tried to update to Windows 10 without success. Finally after a Windows7 update and then upgrade Windows 10. Success! Remotely, the company THAT THIS guy decided that I had to update W10, now all I get is "failure in the snp nonpaged area - uvc.sys" the laptop then restarts auto and trying again and again. Looking at updates successfully I see there's a Windows 10 call successful as well as failed. I did a reset to, but who brought me back to Windows 7.  That's life.  However, when I close I now get an error called "LogonUI.exe - Bad Image C:\Windows\system32\LMIinit.dll if the other is not designed to run on Windows or it contains an error." Try to install the program by using the original installation media".

  With all the man hours spent the last week and a bit on this point, I have to stay on Windows 7 and when the thing dies completely invest in a new (if my boss allows me)!

  This my friends, is his last chance, can someone help me.

  Kind regards

  Sue

  Hello

  I realize has the inconvenience that you are experiencing with the installation of Windows 10. I will definitely help you with this.

  I suggest you refer to the suggestion created by Andre Da Costa in the link mentioned below:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-fix-Windows-10-setup-failure/eba3c864-d9fe-4F8E-9468-81b1f89473ed

   

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Opens the error window 'Winword.EXE - bad image' C:\Windows\system32\bitsprx532.dll «»

  Error window opens "Winword.EXE - bad image", "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try fashion program at new etc. etc."

  This happens at startup when programs open ie. audio and whenever I try to open a program, in this case MS Word. I click the OK button several times and he goes and allows me to work in the program.

  Word:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861096.aspx

  Word Help Forums at the link above.

  They will help you with your question Word when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect to the Windows Vista profile, receive the error message "logonui.exe - bad image".

  Original title: bad image Logonui.exe

  I have laptop Dell XPS M1530.  Last night when I tried to start the computer, it went through the movements until he got to the login screen.  Rather than get the profile to connect to, I got the error message following "logonui.exe - bad image.  C:\windows\winsxs\x86...\COMCTL32.dll is not designed to run on Windows or it contains an error. "When I click ok on the error message and wait for an another error message appears" logon.scr bad image. "  I tried to run the Startup Repair and restoration of the system without result.  I cannot lose the files on the hard drive, but have run out of ideas and options on how to solve this problem.  Someone at - he had this problem and managed to fix it?  I've exhausted the System Support of Dell, as they have failed to: "format the drive and restore to original state."  That is not an option right now.

  I went into the Commpand prompt and delete files that have been raised as errors.  When I rebooted, it came in fine.  I got the files I needd for backup and then rebuilt the system.

• Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

  Help, please!
  I started my computer today and it came with this error:

  "sidebar.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click on OK, then he said:

  "Acrotray.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click OK and then it says:

  "hpqtra08.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  Also I got an error report saying that windows sidebar stopped working.

  My computer is VERY slow in all the commands I give.
  I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

  Do you have an idea what is happening with my computer and what I can do to fix this?

  Thank you very much!

  Hi deacon829,

  You did changes to the computer before that happened?

  Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If you try to install any application before this program, try to uninstall them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for steps to restore of the system in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the problem persists,

  Step 4: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error, called "GfxUI.exe - bad Image".

  I have an error message which disappear from my Windows 7. It is called "GfxUi.exe - bad Image" and said that C:/Windows/System32/atiu9p64.dll is not designed to run on Windows or it contains an error. Then it asks me to resintall it but there is no option for this. It is more of a thing of substance; I can still run programs and work, but the error message does not disappear.

  Need help, please someone. Thank you

  Hello

  1. have you made changes on the computer before this problem?

  2. when exactly this error occurs?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run Microsoft Safety Scanner and check if it helps.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Put your computer in a clean boot state to identify the application at the root of this problem.

  Place your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope the information is useful.

• Recently installed Windows 7 now cannot open any games Big Fish when I try to open the game get error message computer stops and restarts

  Cannot open the computer game stops and restarts

  Check that the Big Fish Games support the site http://bigfishgames.custhelp.com/app/home to see if it's a known issue.  I hope they don't send you here :-)

• 3.4.1 OpenOffice won't open Windows 7 after the success of the download. Error message: - Soffice.bin - bad Image.

  This additional information is included in the error box:-C:\Windows\ system32\cppuhelper3MSC.dll is not designed to run on Windows or it contains an error. Contact your system administrator or the provider of software for support.

  I tried to get help from OpenOffice.org without result. Uninstall/reinstall the results in the same error. I've never had all the previous versions of this program on my PC.

  FYI

  This isn't what asked you, but he can help in any case, I'm under OpenOffice 1. 1 5 with Windows 7 SP1.

  Try this version, can give it a try, because it will not harm you in any way.

  http://filehippo.com/download_openoffice/431/

  The current time and the date right now in Iran, Islamic Republic of is

  16:47
  Tuesday, March 5, 2013
  The + 0330 UTC standard time
   

  UTC/GMT is 13:17 Tuesday, March 5, 2013

  Current weather conditions in Tehran

  Shower of light61 ° F / 16 ° C

• Orphanage Owl error message: Photoshop:exe - bad Image

  I have this error with Adobe Photoshop CS5.

  With reading the other posts, I found an answer to this same question posted - except with CS4.

  He mentions the file plug-in and 32 and 64-bit. Here is where I get confused.

  I parked plug-ins CS3 and put them in my CS5 plug in folder, which is where the problem came. How can I clean my mess now?

  I have no idea how know what is happening with 32-bit and what is happening with 64-bit... You could say, I do not know my songs and you would be right. Laughing out loud

  Help, please. I have benn ignore him for almost a year now.

  c.sewick

  I parked plug-ins CS3 and put them in my CS5 plug in folder, which is where the problem came.

  No doubt.

  Remove all the plugins that have a date older than the CS5 plugins.

  And do not copy photoshop plugins from one version to another - many of them will depend on what is the specific version.  And while we try to test for problems of version, we can always test in the future :-).

• MSASCui.exe bad Image... C:\Program Files/Windows Defender/Mp.Rt.Mon.DLL is not designed to run on Windows or it contains an error.

  Original title : A major problem with Windows Defender... will not run :(

  When I go to run Windows Defender, I get this message: MSASCui.exe bad Image... C:\Program Files/Windows Defender/Mp.Rt.Mon.DLL is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.  Then, after clicking OK, you get another small window saying "Windows Defender User Interface has stopped working... Search for an online solution and close the program (which does nothing) or close the program.    WHY?  McAfee scan says there is nothing wrong with the computer... There is something wrong. Impossible to get websites to find, or they are very slow.

  I have VISTA Home Basic edition, Emachine, bought 32 year THAT VISTA was released this January.

  That is to say 9 - seems to work better than 8 (which took awhile to do)

  SP2 is installed and I believe that most, if not all the updates are installed.

  Oh, and no matter what flash supported won't run... little is a nice way of saying. My flash player update. It is mess up until I had to update. :(

  Try the suggestion of Azam K.  If this help not to do the following:

  https://community.McAfee.com/message/208529

  McAfee should have disabled Windows Defender.  If not, or if you did turn back on, you must turn it off.  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off   Windows Defender cannot be uninstalled from the Vista OS, but can be disabled to avoid conflict with other programs.

  You will probably need to uninstall Flash and reinstall it: http://www.adobe.com/support/flashplayer/

  I don't really like to make a negative comment on an anti-malware program, but McAfee has a reputation for sometimes bogged down operating systems.  If your problem persists, you will need to uninstall McAfee (to include using the McAfee removal tool) and see if that has any impact on your computer problems.  If there is an improvement, you may consider trying another program BC

  http://www.AV-Comparatives.org/

  http://www.dslreports.com/Forum/r25776413-2011-anti-virus-poll

  Kind regards...

• "SkyDrive.exe - bad Image" Error Message box

  Whenever I boot, I get a box of titled error message: "SkyDrive.exe - bad Image" and the message reads, "C:\Users\Christopher\AppData\Local\Microsoft\SkyDrive\17.02010.0530\SyncEngine.DLL is not designed to run on Windows or it contains an error. Try to install the program using the original excavation media or contact your system administrator or the provider of software for support. 0xc0000020 error status. "You kindly give me some pointers as precisely what to do here? Thank you!

  Hi Christophe,

  This problem may occur due to the infection by the virus or because of conflicts between the third-party applications.

  Have you done with the latest changes on the computer before this problem.

  Method 1:
  I suggest you run an antivirus scan using the Microsoft Safety Scanner to confirm that your computer is free from any infection by the virus. Please find the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  (1) data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  (2) the Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Method 2:
  If the problem persists, I suggest to start the computer in safe mode and check if the problem occurs or not. If the problem does not occur in mode safe run clean boot and check if it helps.

  
  Step 1:
  I suggest you to return the item and check if it helps.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

  Step 2:
  If the issue occur not in Mode safe run clean boot and check.

  Affecting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I did an update yesterday and now my lightroom 6 and elements will not open. I get error messages / error 16 on lightroom and we have tried everything, including the creation of a new Director. Help!

  I did an update yesterday and now my lightroom 6 and elements will not open. I get error messages / error 16 on lightroom and we have tried everything, including the creation of a new Director. Help!

  In Adobe Creative Suite or Adobe Creative Cloud configuration error

• When I run the "@ddl_setup.sql" on a node of the 11gr2rac getting errors

  I want to open DDL replicate of the source node, so I run

  SQL > @marker_setup

  Marker setup script

  You will be asked the name of a schema for Oracle GoldenGate database objects.

  NOTE: The schema must be created before running this script.

  NOTE: Stop all replication DDL before starting this installation.

  Enter the Oracle GoldenGate name schema: ogg

  Table marker installation script is completed, run the script to check...

  Please enter the name of a schema for GoldenGate database objects:

  Name of schema setting for OGG

  MARKER TABLE

  -------------------------------

  Ok

  SEQUENCE MARKER

  -------------------------------

  Ok

  When I run the "@ddl_setup.sql" on a node of the 11gr2rac getting errors

  SQL > @ddl_setup.sql

  Configure Oracle GoldenGate DDL replication script

  Verify that the current user has privileges to install the DDL replication...

  You will be asked the name of a schema for Oracle GoldenGate database objects.

  NOTE: For a source of Oracle 10 g, the basket of the system must be disabled. For Oracle 11 g and later, it can be activated.

  NOTE: The schema must be created before running this script.

  NOTE: Stop all replication DDL before starting this installation.

  Enter the Oracle GoldenGate name schema: ogg

  Working, please wait...

  Line to the ddl_setup_spool.txt file

  Checking the sessions that hold locks on the tables of metadata Oracle Golden Gate...

  Full version.

  Using OGG as Oracle GoldenGate scheme a name.

  Working, please wait...

  Script of DDL replication configuration has completed, run the script to check...

  Please enter the name of a schema for GoldenGate database objects:

  Name of schema setting for OGG

  CLEAR_TRACE STATUS:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  No error no error

  CREATE_TRACE STATUS:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  No error no error

  TRACE_PUT_LINE STATUS:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  No error no error

  INITIAL_SETUP STATUS:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  No error no error

  STATUS OF THE DDLVERSIONSPECIFIC PACKAGE:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  No error no error

  STATUS OF THE DDLREPLICATION PACKAGE:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  No error no error

  DDLREPLICATION STATE OF PACKAGE BODY:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  1453/9 PL/SQL: statement ignored

  1455/23 PL/SQL: ORA-00942: table or view does not exist

  1464/9 PL/SQL: statement ignored

  1466/23 PL/SQL: ORA-00942: table or view does not exist

  1478/9 PL/SQL: statement ignored

  1480/23 PL/SQL: ORA-00942: table or view does not exist

  1485/9 PL/SQL: statement ignored

  1487/23 PL/SQL: ORA-00942: table or view does not exist

  1492/9 PL/SQL: statement ignored

  1494/23 PL/SQL: ORA-00942: table or view does not exist

  1499/9 PL/SQL: statement ignored

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  1501/23 PL/SQL: ORA-00942: table or view does not exist

  1581/4 PL/SQL: statement ignored

  1582/18-PL/SQL: ORA-00942: table or view does not exist

  1584/4 PL/SQL: statement ignored

  1585/18-PL/SQL: ORA-00942: table or view does not exist

  1600/25 PL/SQL: ORA-00942: table or view does not exist

  1600/4 PL/SQL: statement ignored

  1602/25 PL/SQL: ORA-00942: table or view does not exist

  1602/4 PL/SQL: statement ignored

  DDL IGNORE TABLE

  -----------------------------------

  FAILURE: The Table does not exist

  DDL IGNORED THE JOURNAL TABLE

  -----------------------------------

  FAILURE: The Table does not exist

  STATUS OF THE DDLAUX PACKAGE:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  No error no error

  DDLAUX STATE OF PACKAGE BODY:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  0/0 PL/SQL: analysis of completed Compilation unit

  1/21 PLS-00304: impossible to compile a body of 'DDLAUX' without sound

  specification of the

  1/21 PLS-00905: OGG object. DDLAUX is not valid

  SYS. STATUS OF THE DDLCTXINFO PACKAGE:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  No error no error

  SYS. DDLCTXINFO STATE OF PACKAGE BODY:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  No error no error

  DDL HISTORY TABLE

  -----------------------------------

  FAILURE: The Table does not exist

  DDL HISTORY TABLE (1)

  -----------------------------------

  FAILURE: The Table does not exist

  DUMP DOF TABLES

  -----------------------------------

  FAILURE: The Table does not exist

  COLUMNS OF DUMP DDL

  -----------------------------------

  FAILURE: The Table does not exist

  GROUPS OF LOG DUMP DDL

  -----------------------------------

  FAILURE: The Table does not exist

  SCORES OF DUMP DDL

  -----------------------------------

  FAILURE: The Table does not exist

  DDL DUMP KEY PRIMARIES

  -----------------------------------

  FAILURE: The Table does not exist

  SEQUENCE OF the DDL

  -----------------------------------

  FAILURE: The sequence does not exist

  GGS_TEMP_COLS

  -----------------------------------

  FAILURE: The Table does not exist

  GGS_TEMP_UK

  -----------------------------------

  FAILURE: The Table does not exist

  STATE OF THE DDL TRIGGER CODE:

  Error on line/pos

  -------------------- -----------------------------------------------------------------

  126/9 PL/SQL: statement ignored

  128/23 PL/SQL: ORA-00942: table or view does not exist

  133/21 PL/SQL: ORA-02289: sequence does not exist

  133/5 PL/SQL: statement ignored

  657/14 PLS-00905: OGG object. DDLAUX is not valid

  657/5 PL/SQL: statement ignored

  919/25 PL/SQL: ORA-00942: table or view does not exist

  919/4 PL/SQL: statement ignored

  DDL TRIGGER SYSTEM STATUS

  -----------------------------------

  Ok

  STATUS OF RACE DDL TRIGGER

  ----------------------------------------------------------------------

  ACTIVE

  OF "OGG". "" GGS_SETUP ".

  *

  ERROR on line 2:

  ORA-00942: table or view does not exist

  OF "OGG". "" GGS_SETUP ".

  *

  ERROR on line 2:

  ORA-00942: table or view does not exist

  OF "OGG". "" GGS_SETUP ".

  *

  ERROR on line 2:

  ORA-00942: table or view does not exist

  LOCATION OF THE TRACE OF DDL FILE

  ------------------------------------------------------------------------------------------------------------------------

  /Home/data/app/Oracle/diag/RDBMS/AppStore/appstore2/trace/ggs_ddl_trace.log

  Analyze the status of the installation...

  THE STATE OF REPLICATION DDL

  ------------------------------------------------------------------------------------------------------------------------

  ERRORS in the installation of software components of DDL replication (6)

  Complete script.

  I had been struggling with the same problem for 2 days. You run the script as sysdba, how do you get the error then insufficient? I did my first test GG in February. I've been on 11.2.0.3 + patch January + patch for the integrated capture. It has worked well for me. I went back to my GG test week with 11.2.0.3 + patch of July last and ran into the same problem. The solution for me was the last version of GG. See my previous post for the patch numbers.

  Post edited by: ursusca

• Impossible to install the Safari extensions; error message

  Impossible to install the Safari extensions; error message

  Hello

  Make sure that OS X and Safari are up-to-date.

  Open system preferences > App Store, then click on: check now

  Your profile says your Mac works v10.11.1. The v10.11.5 update is available. This is maybe the reason why you can not install the Safari extensions.

• I have windows 7 when I right click on my desktop and open the Customize says error unspesified

  I have windows 7 when I right click on my desktop and open the Customize says error unspesified

  Hi Marion,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

   

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the error message that is accurate or complete?

  Please follow the methods and mark the question below:

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

   

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

  Method 3:

   

   

  I suggest you to perform SFC (System File Checker) analyze and check if TI the problem persists. To do this, please see the following article.

  The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions and troubleshoots missing or damaged system files in Windows.

  For more information how to make SFC / scan, please follow this link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833

   

   

  Method 4:

   

  Try to create a new user account and see if the problem still occurs because the user account might have corrupted.

  Create a user account:

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  If the new user account works fine without any problem, then follow the link below to fix a corrupted user profile and transfer your data from the old account to the new account files.

  The difficulty of a user profile is corrupted:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

   

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.