Impossible to open the window "Change time" and Date in Control Panel
I'm trying to change the date & time on my machine. But when I click on 'Time & Date change' in the Panel '-nothing happens. Literally--NOTHING. Similarly, when I right click on the clock in the taskbar 'departure' and hit "set time" - nothing happens. Can anyone help?
Hello
Timedate.cpl utility is the command that launches.
Start\Run\ timedate.cpl
If not there is not use the find command to find and move it to the system32 folder.
Tags: Windows
Similar Questions
-
My asus computer continues to change time and date
My ASUS U50F/Windows 7, 64 bit version continues to change time and date. Sometimes he changes a day, sometimes is two or more days to come, but after a few months, it resets the date back to 2009. It seems that a lot of people have the same problem as me. Some suggest it is the BIOS battery, but that's not the problem. I got my computer some time in 2010, and well enough it has been the same since.
Sometimes, the problem is more common, and sometimes it goes on for a few months without at all what's happening.
Any input will be greatly appreciated, but please don't say I need to change the BIOS battery, cause it is not the problem.
Thank you
Hi Edward Aguilera,.
Try the steps suggested by Kevin D Souza from this link and see if it helps.
Response and let us know the status.
-
The relay through time and Total flow control
Hi all
I'm relatively new to Labview and have worked on a great program from lately, which uses a Module with my cDAQ-9178 OR relay SPST 9481 to open and close the 3 different solenoids. The program should open at a specific time and leave it open until a certain amount of flow is passed through them. I already finished the programming to record the total flow through the valves, and after many hours past the forums I found a way and changes in the code that turns on the relay based on the amount of time spent searching, however it turns on the relay and leave them on until the 'period' are filled then pass on the next round. I need to change this option further so that it lights when my "Cycle Start Time" is reached, turns off when reaching the set amount of flow for this cycle and then continues to wait until the next "Cycle Start Time" occurs.
I imagined a way to proceed would be; by eliminating where departures from the clock a new cycle each run and just have it constantly by comparing the time of "Initial start (run)" 'Start' time sequence (when I push the start sequence and actually start to opening the relay). Then change the "delay" to 'Cycle start time' and the (> =) function to a function (=). So now, it begins after the elapsed time is equal to the start time of Cycle. Certainly, this opens the questions, because currently, at the beginning of the cycle the command of the relay begins. So I need make my comparison outside the case 'Cycle' or move the control relay in the case of 'true/false '. However, then I run the question of how to get the software to change the case once he saw to stop the relay.
As you can see, I have about 1 million different things in my head that I played with. Advice or assistance to get me on the right track, or you know of examples would be great! My code is attached below, and I'll post a photo after this post about how I'm taking care to record the total flow. Thank you for your time and help!
Hi M_Blaylock,
You mentioned that you are relatively new to LabVIEW. Are you familiar with some of the debugging tools?
http://www.NI.com/getting-started/LabVIEW-Basics/debug
Turning on climax execution should allow you to see the data flow through your schema. Also, probing the wire just before the input case structure should allow you to see what data is actually trying this case selector. If you get unexpected data, you can probe the front steps to see source these unexpected data.
I hope this helps and good luck with your code!
-
Windows 7 - time and date always reverts to December 31, 2001
Whenever I start my computer (after a power down) the date and returns the wrong time and date. The date is December 31, 2001 and the time is 11:? H. Ce that is the cause? It only started a few days ago. What can I do to fix this?
I'm guessing that you have a desktop computer that is old enough?
I think that the problem is caused by a small button battery in your computer that needs to be replaced.
If you you disconnect the power supply to your computer
Hold the button for 7 seconds
Lay the computer on its side with the side where the wires are down
Remove the side panel
By peer in there and you'll see a shiny silver battery about 1/2 "in diameter. It's the battery
Go into any store and buy a 2032 button battery. They cost less than $5
Find a very small screwdriver flat blade (like that used for glasses)
Very gently, loose battery. It will pop up, so be ready to grab.
Press the new battery with the markings embossed on the top-side facing you.
Close the side panel
Replace vertical
Start the computer
He now has to have the date and time together, but once more - at least for this 5 years. You have to press F2 at startup to get to the place where the date and time are stored. Equip date and current time. It does not use the mouse only keyboard. This includes the way it tells you to save what you were doing. You can hear the ROAR more and blowing so that some things is again set up.
Once Windows is all set up:
Click once on the date/time in the lower right
Click change date and time
Click time Internet
Click on change settings
Select time.b.nist.gov and click on the Update button - it synchronizes the clock of the computer with the US govt time system labs
Close
You are all fixed.
-
All my files with the .lnk extension will open with Windows Internet Exploer and I can't change them.
It's everything that happens anywhere, and I can't change it please help.This tutorial should help guide you through this process: http://www.mydigitallife.info/2008/06/20/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-windows-vista/
It's a fairly simple process.
-
How to change the time and date on the desktop?
My computer does not show the time and date.
I tried several times to update the date and time, but after the judgment the same problem persists.How to solve the problem?Mr. Thanapackiam I know that this issue please follow my steps
Step 1:-go to the Start Menu and Type "region and language" and press enterStep 2:-go to the location tab and select your current locationStep 3:-go to the Start Menu and Type "Services" and press ENTER. (i.e. open Services)Make sure that the Windows time service is running.Step 4:-click Date and time on the far right of the taskbar. Click Change Date and time settings.Step 5:-click Change Date and time settings button to change the date and timeStep 6:-Click Internet Time to synchronize the time with the Server onlineStep 7:- click on change settings , then update now
Thank you -
How can I reset the time and date on Windows Vista?
How can I reset the time and date on Windows Vista
http://www.ehow.com/how_2056384_change-date-time-Windows-Vista.html
http://www.Vistax64.com/tutorials/114989-date-time-change.html
Read the information in one of the links above.
See you soon.
Mick Murphy - Microsoft partner
-
After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.
Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.
http://support.Microsoft.com/kb/3161608
Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.
Best regards, VZ
-
After that I have to redeem my code and try to download it says that it is impossible to open the page.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
I WOULD LIKE WHEN I OPEN ADOBE ACROBAT CC, ALSO IT IS AUTOMATICALLY OPEN THE WINDOW ADVANCED SEARCH. THANK YOU IN ADVANCE.
(Please do not write in capital letters in the future)
For this, you can use a script, you will need to place it under Tools - JavaScripts - Document JavaScripts.
Enter this code in the window that opens:
app.execMenuItem ("FindSearch");
Then save the file, and the next time that you open the advanced search window should appear automatically.
-
When I opened my favorites drop down and he is bigger than the window of Firefox, and I click on a bookmark bookmark dropdown closes, but a ghost of the part of the bookmark image that is outside the window of firefox on the office remains, by pressing F5 to refresh the screen it will erase, but shouldn't have to do that. Using the latest version of Firefox (15)
Try disabling hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
- https://hacks.Mozilla.org/2010/09/hardware-acceleration/
-
- Question
When I opened the window "save the Page under", the drop-down box file name indicates the files that have been saved a long time ago. It is not cleared by a function 'clear history' that I can find. How can I erase this?
Hello.
I think this is a related issue of Windows, because it is the Manager to save the windows file that we are talking about here (right?). You should contact Microsoft for help with this one, I think. You expect to be able to delete entries simply by touching delete on your keyboard when they are concentrated (that is how it goes for the removal of the form entries specific autocomplete in Firefox), but I have not tried.
I'm sorry I can't be more helpful.
-
How to use the windows fax machine and how to open an administrator account?
How use the windows fax machine, and how can I open an administrator account?
Original title: activateadministratoraccount
Hello
Thanks for your posting in the Microsoft community
Well, you can enable the administrator account hidden instead of an account
You can make the win + r and write lusrmgr.msc in the start search box or in the command run and pressing ENTER. Or, you could open the computer by right clicking on computer management in the start menu and select manage.
Expand System Tools > local users and groups > users.
Right-click the administrator account, and then select "Set password".
In the 'set password' click 'continue '.
In the "set password" enter the password of the administrator twice, then click on 'Ok '.
Then, activate the administrator account. Right click on the administrator account and select "Properties".
n check the box "account is disabled". Click on the Ok"" button.
-
Change the time and date of deposit when importing
Hi everyone, when I import images in my project, automatically first change date and time with the current date and time in the finder. So each imported file have changed the time and date when I search in the finder under the "created" or "modified" column, is this normal?. There is no way to avoid this?
Thanks in advance
Yes, you can prevent this! Go to the preferences of first and go to the media section. Uncheck "Write XMP IDS to files on import". Boom, done. First will not add his small beacon of metadata files when you import them. This isn't a huge deal for most publishers except Adobe apps could create media Cache files more than necessary if you re - use clips in other projects. Don't forget, however, anything, if you change the metadata (in the project Panel or metadata) file, it'll still change changed data for the clips.
-
Hello, I bought a monthly license paid for indesign last night and I do not understand how to play with it? When I opened the window of creative cloud, they suggested me to buy indesign (but I bought it already...) Please, help me... This is our easy to understand for beginners like me at all
FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?
https://forums.Adobe.com/thread/1962238
Download/install the desktop application, connect and install applications subscription.
https://helpx.Adobe.com/creative-cloud/help/download-install-app.html
Creative cloud to desktop
https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html
Sign out, sign in | Creative office cloud app
http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html
Install, update, or uninstall applications
http://helpx.Adobe.com/creative-cloud/help/install-apps.html
Maybe you are looking for
-
Satellite L650 - Webcam always shows the same picture
Hello I recently bought a Satellite L650 and when I use the webcam it shows just the photo that was there when I bought it. I tried to take pictures and videos, but they all come out with this same picture. How can I get rid of this I can take my own
-
Re: Passing the record reader user C to E drive Satellite L40 - 17U
Hello The HARD disk is partitioned with the 'C' drive users and any system/vista files. C drive now more complete. Many tried to copy the user folder on disk 'E' with only partial success. Want to remove c altogether and switch to E - in order to sep
-
My PC with Vista Home premium does not START because the keyboard does not work. It's a Dell Dimesion E521 PC with Vista. This happened after a power failure; I get a black screen that says «disabled keyboard» The key board works and the USB ports ha
-
PSC 2355 black cartridge in use today is incompatible with this printer
I just got this message after using this cartridge for 6 months or more. I removed and reinstall the cartridge... any help monitoring troubleshooting directions... no help... installed don't patch in directions... no help. I am at a loss. Running Win
-
Must uninstall the display driver and replace it with another. However, when I restart my Windows 7 HP Pavilion automatically reinstalls the old driver! How can I stop the automatic relocation of the old driver when I reboot? Than you. Discussions