Impossible to pass the numbers or iWorks

Similar Questions

• IPS is impossible to pass the signature

  MY client pointed out that IPS modular is impossible to pass the signature in the ASA5510, there already purchase the license.

  Can I upgrade the IOS ASA or do something else?

  What is the formal process to solve this problem?

  the error is as below:

  Cannot upgrade the software on the sensor.

  -This upgrade must be installed on a sensor with 4 engine version

  The currently installed version of engine is 1.

  SLPG-BOH-AIP # show version

  Application partition:

  Cisco Intrusion Prevention System, Version 7.0000 E1

  Host:

  Domain keys key1.0

  Definition of signature:

  Update of the signature S302.0 2007-09-17

  Virus update V1.2 2005-11-24

  OS version: 2.4.26 - IDS-smp-bigphys

  Platform: ASA-SSM-10

  Serial number: JAB09410434

  License expires on: 26-Sep-2011 UTC

  Sensor time is 192 days.

  With the help of 609878016 of 1054670848 memory available bytes (57% of use)

  system is using 17.4 M off 29,0 M bytes of disk space available (60% of use)

  the application data uses 45.0 M 166,8 M bytes of disk space available (28% off

  its use)

  start using 35.2 M off 68.6 M bytes of disk space available (54% of use)

  MainApp to Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  AnalysisEngine-Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  2007_SEP_26_11_54-Z-CLI (release) 2007-09-26 T 12: 09:32 - 0500

  Upgrade history:

  IPS - K9 - 5.1 - 7 - E1 10:24:03 UTC Friday, August 5, 2011

  Version 1.1 - 7, E1 0000 recovery partition

  SLPG-BOH-AIP #.

  You must upgrade the IPS module to the latest version first before that you can update the signature. The current version of 7.0000 E1 software is very old, and the latest available version is now 7.0.5a (E4). E1 engine is very old and is not compatible with the signature that runs on the E4 engine.

  Here are the release notes for 7.0.5a (E4):

  http://www.Cisco.com/Web/software/282549758/50172/IPS-7_0-5A-E4_readme.txt

  You need to upgrade the module running at least version 5.1 (6) E3 before you can upgrade to 7.0.5a (E4).

  Once the IPS module has been upgraded to version 7.0.5a (E4), you can update to the latest signature.

  I hope this helps.

• Help, please! Impossible to pass the local account on the Microsoft account.

  I got a Samsung ATIV smart PC 500 t as a gift today and I'm going to be very difficult to implement. I tried on and off for about 14 hours now without success.  Here is what happened:

  I've updated the PC software told me to. (there was a brochure stating that I needed to update before using my keyboard dock)

  I put the PC by using a local account, because for some reason, he said it was impossible to add my Microsoft account I created today specifically for this PC.

  I tried several times to switch to the Microsoft account and I get the error message

  "We're sorry, but something went wrong. your account has not been changed to this account from Microsoft.

  "Code: 0x800b0101.

  What does that mean? Why this is happening and what needs to be done to solve this problem?

  I also tried using the tiles, hoping maybe going this route would allow me access to my Microsoft account so that I can at least use the apps and what not.  When you try to open the store, I have this message: 'we are could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I also tried via the contacts, messages and weather applications. Whenever I get similar error messages.

  Of course, I am not very computer savvy, my internet connection is working properly, I am able to access the various web pages (even if I get a warning message of security for each of them, which is very annoying).

  Anyway, I can't understand this. Does anyone have a tip or useful information? Can I use my PC.

  Thank you!!

  Hello

  Please refer to following patch and see if that helps:

  http://www.thewindowsclub.com/your-account-wasn

  Hope this helps, good luck :)

• Impossible to pass the Lion iMac

  Hi, I tried to download the El Capitan too, but the Get button in the App store, give me only: copy the link or tell a friend, there is no download button. Actually, it's for all the app (free or paid) in my App store, what wrong with my Mac?

  What should I do?

  Look under the Apple Menu and click on about this Mac to us indicate the number of age and model of your machine.

• Impossible to pass the Lion

  I have an iMac in early 2009. I want to upgrade Lion to El Capitan, but the software update says my software is up to date. Why can't I move?

  Thank you

  Cindy

  Full version upgrades do not appear in the pane of system preferences software update. Download El Capitan from the Mac App Store.

  (137811)

• Impossible to pass the BIOS back to 2.28 (Aspire E1 - 731)

  Hi, I have flashed accidentally BIOS version 1.17 on my Aspire E1 - 731 running win 8.1). Now it won't boot from the HARD drive. I am able to boot with win 8 from a USB (Win to Go) and tried to flshh back to version 2.28 BIOS but the program does not Flash it. I said that I must uograde to a similar version (1.x).

  Currently, he does not drive HARD and when I boot with the USB with Win 8, WIFI doesn't work.

  Is there a way I can Flash the BIOS to 2.28 so my computer working again?

  Thanks, I finally solved the problem by using the procedure described here: http://catchtito.blogspot.com/2013/05/how-to-update-to-2x-bios-from-1x-bios.html

  Works perfectly and my computer is now running.

• Windows 7 Professional - impossible to pass the beta Office 07 to 2010.

  Hello

  I came here looking for help with a problem I had.  I run Windows 7 Professional 32-bit and I installed Office home and Student 2007.  It does not come with the editor and I need a quick project so I downloaded the beta of Office 2010.  The problem I've been is I chose the upgrade (previous versions of Office) during the installation for the beta version, it starts to install and gets all the way to the end and then after like 5 or 10 minutes sitting at the end (full progress bar), it starts to pull on this error:

  "Error 1712: a required file to restore your computer to a previous State could not be found." He said something like that and it just repeating me it again and again until I have to cancel Setup.  I looked at other places where the solutions.  I tried the Windows Installer Cleanup utility to try to remove some 2010 can be run in when installing it is.  I have redownloaded both Setup and delete all the files of 2010 and the registry keys that have been left behind and I always get this error when you try to upgrade.

  I hope you can help out me.

  Thank you!

  Welcome to the Microsoft Answers site.

  1. you should not spend 2007 a beta of 2010.  The program may have had this option, but you shouldn't take it.

  2. actually, I think that you should uninstall your 2007 before you install the BETA 2010 version.

  3. never use a BETA version on a production machine (only in a test environment), and if you don't have a test computer, so I would be very cautious about installing a Beta version on your machine.

  Have you tried to uninstall all versions of Microsoft Office and then reboot first before to perform one set up again? Bob Larson Access MVP

• Impossible to pass the version staged in the room

  I have Vista Home Premium on my Sony laptop. Support will soon cease. I bought Office 365 to install Office on this and other computers. I need to upgrade to Windows 7 or 8, (Office 365 is not not compatible with vista,) but you have to use 7 due to working software. Try the upgrade, I get the error message that the staged version cannot be upgraded to a version not stadifiée and the upgrade fails.

  Any help gratefully received.

  You happen to have access to MSDN or TechNet? If so, make sure that you do not download a controlled version, those who cannot be used to do in place upgrades of commercial versions of Windows.

  Upgrade to Windows 7 from the following operating systems is not supported:

  ·      RTM of Windows 95, Windows 98, Windows Me, Windows XP, Windows Vista®, Windows Vista Starter, Windows 7 M3, Windows 7 beta, RC of Windows 7 or Windows 7 IDS

  ·      Windows NT® Server 4.0, Windows 2000 Server, Windows Server® 2003, Windows Server 2008 or Windows Server 2008 R2

  ·      Upgrades on place of several architectures (for example, x 86 to x 64) are not supported.

  ·      Place of cross-language upgrades (for example, en - us en - us) are not supported.

  ·      Cross-SKU upgrades (for example, Windows 7 N to Windows 7 K) are not supported.

  ·      Upgrades from Windows Vista to Windows N, Windows K, Windows KN or Windows E are not supported.

  ·      Upgrades on place of type Cross-compiling (for example, the fre to chk) are not supported.

  ·      Pre-release in place upgrades across milestones (for example, Windows 7 RC to Windows 7 RTM) are not supported.
  For more details, see the link http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

• Impossible to pass the security on media player 11 - component

  I am trying to download an audio book and I need to upgrade the security component.  No matter where I'm going to do this, I keep getting errors.  I turned off my firewall and tried but in vain

  Hello aflower,.

  1. What are the errors you get?

  2. what browser do you use?

  You can download the upgrade of Windows Media Play Security 2.5.0.1 under the following link.
  
  The security component upgrade

  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Note: right click on the file and open it as administrator.

  For your information:

  http://support.Microsoft.com/kb/919589/en-us

  Kind regards

  Savan - Microsoft technical support.

• Impossible to pass the value of the element in the message at the APEX. CONFIRM

  Using APEX 4.2

  All,

  I created a botton with action set to redirect to URL.  I call the APEX in the target url. CONFIRM the function where I want to use a variable in the string to the function.  Here, I

  JavaScript: {if (confirm ("Notification will be sent to" + $v ("p3_tot_emps") + "used.))}  Do you want to continue? ") doSubmit ('SUBMIT_EMAIL') ;}

  "All that is displayed is" Notification will be sent to do or want to continue "" the value of p3_tot_emps is not displayed.  FYI - p3_tot_emps is text and I can show the value as an item on the page so I know that it is filled (and I also tried other items to test.  No luck.

  No idea what I am doing wrong?  Or other ways to do it without java custom as I'm certainly not a java coder.

  Thanks in advance,

  Sandie

  soliphant wrote:

  Using APEX 4.2

  All,

  I created a botton with action set to redirect to URL.  I call the APEX in the target url. CONFIRM the function where I want to use a variable in the string to the function.  Here, I

  JavaScript: {if (confirm ("Notification will be sent to" + $v ("p3_tot_emps") + "used.))}  Do you want to continue? ") doSubmit ('SUBMIT_EMAIL') ;}

  JavaScript is case-sensitive, and the HTML ID of the elements of the APEX attributes are uppercase. Use $v("P3_TOT_EMPS') .

• Impossible to pass the 7.0.9 to 7.0.10

  Hello
  
  Get the following error on linux and linux - x 64:
  
  "Unable to move the product to version 7.0.9 to 7.0.10."
  
  Ideas? I have never had an issue before upgrade.
  
  Thank you!

  Yes, I agree. This was never the case before. in your case, to upgrade, follow these steps

  -change your 7.0.9 setup/WebServer.inf as below

  PRODUCT_SP_VERSION = 9
  PRODUCT_FULL_VERSION = 7.0.9
  JDK_LOCATION = / export/home/sn123202/oracle/ws7u9/jdk
  INSTALLED_COMPONENTS = admincli, svrcore
  PRODUCTVERSION = 7.0

  so that it now looks something like

  PRODUCT_FULL_VERSION = 7.0
  JDK_LOCATION = / export/home/sn123202/oracle/ws7u9/jdk
  INSTALLED_COMPONENTS = admincli, svrcore
  PRODUCTVERSION = 7.0

  and now you should be able to upgrade successfully

• Impossible to change the numbering of page/text

  

  Cannot for the life of figure me out how to change this. I used the manual model adobe Bridge to make a manual. It's the last thing I can't do. I am also using CS4.

  The headers will be on the master page, which is where you need to change. They can use a variable - I've not seen the template.

• (Redirected) Impossible to pass the memory Test

  Hi, mine is an inspiron dell 5720 17r, 8 GB of ram, hard drive 1 TB and for 15 days it showed lots of bsod (similar to unexpected kernel mode trap, etc. memory management error), Hangman, lapi fuzzy screen and freezed until I manually poweroff.

  Now, when I tried starting diagnosis, mine all tests except some memoy tests. During a memory test, the screen became fuzzy and suspended manually for a long time until I poweroff. Sometimes, it makes beeps too, after a while, it starts as it is. What it means? My hard drive should be replaced or it is possible that they are misplaced.

  Help will be great, pls response asap, thnx in advance

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Impossible to pass the version 10.10.5 El Capitan

  Message says update not available with this Apple ID.

  I have only one Apple ID and it puts me in everything.

  What should do?

  Thank you, Rick

  Have you tried to disconnect and connect again to your account?

• The numbers won't let me record time

  Hello

  I transferred my data from old iMac (mid-2010/Mavericks) numbers to a new (end 2015/El Capitan). In addition to the fact that I can't use the wonderful version of iWork and I'm stuck with a version with an annoying interface, numbers will not work correctly.

  I have a table to track the interactions I have with my students online. In a column, I record the time spent in particular student tutoring. Although the numbers transferred the old data to the new program, it won't let me enter the duration in. I can't copy and paste. And since I get paid according to time spent, it is a crucial column.

  How can I fix it?

  Thank you

  Kim

  Kim,

  It is always easier to help when you see what you see.  Use this link to help you post a screenshot.  It is safer to remove the personal information from the screenshots.  So duplicate sheet and change called a remove personal information:

  How to post a screenshot on the Apple Discussion Forums

  Explaining what happens when you type in a cell where you try to enter the hour.