Impossible to pass to 8.1 due the permission level

Similar Questions

• Impossible to pass guard Office suspended on the verification of the addons with new version 3.6,

  I want to improve every time I have the same problem. A normal level is normal, but then the new version will check the addons for compatibility and there it does'nt go further.

  Also, when I first delete the entire installation of firefox and you want to install, I get the same problem

  I used version 3 for years, as whenever I tried an update, it crashes. Even with 9. So I had to always go back and reinstall 3, where everything would be fine. 9 works on my laptop with Vista and the new feature I wanted was synchronization, to synchronize bookmarks. This idea of love. But on my desktop with XP, could not for the life of me get Firefox works with any version past 3.

  Here's the solution that worked for me:

     opened the version that worked, and saved bookmarks to USB drive. That's the main thing I wanted in the new version.
     uninstalled FF
     manually deleted all files in FF and Mozilla folders on the hard drive, including any folder named "mozilla" or "firefox"
     edited the registry (read about how to do this properly elsewhere) and manually did a search for and removed every single instance of "mozilla" and "firefox" that existed on the computer. Made sure I did search from the top of the registry tree
     rebooted
     installed firefox 9
     imported bookmarks from USB drive
  

  everything works fine now! Years of updates does not work and a clean registry does the job.

• Subgroup of experts can pass events to the top-level event loop?

  I'm working on a VI that may have up to 1000 controls (Yes, she really need that much).  To reduce the size of the user interface and increase the modularity of code, I partitioned design into subgroups that are loaded in tabs.

  Subgroups are responsible for:

  "VI reference to open"--> "invokes the method: Run VI '--> ' invoke the method: Insert VI»

  (Sorry, I don't know how to incorporate images here, yet)

  The upper level has some of its own controls in addition to the case of the Sub-group of experts, and it will be built on the design of producer-consumer model.  The loop of consumer manages the interaction with the hardware (write-only).  Each sub-group of experts will also have its own event loop to manage coordination of the user interface within the Sub-group of experts and also a preprocessing of data that results from the activity of the user within the Sub-group of experts.

  Here's the problem: go in the subgroup of experts, how do I pass an event up to the top-level event loop so that the hardware access request can be entered into the queue of the consumer?

  At first it seems I could solve this problem in two ways:

  (1) rather than to use an Invoke node to insert the Sub-group of experts, is it possible to connect the frame of the Sub-group of experts against a VI that is instantiated in the block diagram?   If there is, I can simply use dataflow to bring jury secondary to the upper level events.   But for now, it seems there is no way to have a subgroup of experts except by using the Invoke node.

  2) there is another way, that we have found, but this is an ugly hack. The reference to the 'Open VI' VI using, I use ' call method: control value: Get.  Gives me the value of a control in the Sub-group of experts, but there is no case of signaling, so I have to resort to polling stations, which slows down the user interface and breaks the model "Event Loop".

  Y at - it of other ideas for how to get events from the Panel under treaty to the next level?

  (of course, this isn't * all * the events we manage.)  The Sub-group of experts will actually a pre-treatment and then send only the selected events to the highest level user-defined)

  Thank you and best regards,

  J.

  I have not used the secondary method before, so I can't save what I think with real experience.

  But,

  If the Subvi who is put in a secondary control on front panel for a queue reference, I think you'd be able to do the Invoke node to set the reference queue control before calling the functioning of the VI.

  The other idea would be do not to have a reference of queue control to pass.  But use named queues and leave the Subvi in high school to create its own queue reference based on the same name that was created in the main VI.  When it ends, it could destroy its unique queue reference and not to force a destroy all and reference to the queue in the main VI would still be a queue works valid waiting for an another sub - VI at the secondary level to generate his reference to the same queue and sends the data in.

• permission level on the database account

  Hi all!

  About to install RoboHelp Server 8.

  We have created a database of SQL and RoboHelp user name and password for this database.

  For installing RoboHelp Server 8 I guess that on behalf of the db need DBO permissions (full owner).

  However, our DBA group dislikes leave Auditors with the permission of DBO.

  After installation, the permission level for the database account can be lowered? to say change or read/write?

  Thanks for the info!

  Frank

  Hi Frank, and welcome to the HR forums.

  When you start the game RIGHT, he is not connected to the DB. You must specify information to logon for a user with full administrator rights. It is used to create a Group Admin and user has permissions admin rights are certainly used. You would then create other users, groups, permissions that require administrative rights on the opening of the session.

  Perhaps (I'm not sure) you could get away with access read/write if all you were doing was maintenance of zones, run reports, etc.. However, you will need administrative privileges whenever you need to create/modify/delete users or contexts. Personally I would have not thought that it was worth the hassle.

  If you return to your DBA and remind them that you only has access to the Config Manager, where DB security can be compromised, would appease them?

• IPS is impossible to pass the signature

  MY client pointed out that IPS modular is impossible to pass the signature in the ASA5510, there already purchase the license.

  Can I upgrade the IOS ASA or do something else?

  What is the formal process to solve this problem?

  the error is as below:

  Cannot upgrade the software on the sensor.

  -This upgrade must be installed on a sensor with 4 engine version

  The currently installed version of engine is 1.

  SLPG-BOH-AIP # show version

  Application partition:

  Cisco Intrusion Prevention System, Version 7.0000 E1

  Host:

  Domain keys key1.0

  Definition of signature:

  Update of the signature S302.0 2007-09-17

  Virus update V1.2 2005-11-24

  OS version: 2.4.26 - IDS-smp-bigphys

  Platform: ASA-SSM-10

  Serial number: JAB09410434

  License expires on: 26-Sep-2011 UTC

  Sensor time is 192 days.

  With the help of 609878016 of 1054670848 memory available bytes (57% of use)

  system is using 17.4 M off 29,0 M bytes of disk space available (60% of use)

  the application data uses 45.0 M 166,8 M bytes of disk space available (28% off

  its use)

  start using 35.2 M off 68.6 M bytes of disk space available (54% of use)

  MainApp to Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  AnalysisEngine-Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru

  nning

  2007_SEP_26_11_54-Z-CLI (release) 2007-09-26 T 12: 09:32 - 0500

  Upgrade history:

  IPS - K9 - 5.1 - 7 - E1 10:24:03 UTC Friday, August 5, 2011

  Version 1.1 - 7, E1 0000 recovery partition

  SLPG-BOH-AIP #.

  You must upgrade the IPS module to the latest version first before that you can update the signature. The current version of 7.0000 E1 software is very old, and the latest available version is now 7.0.5a (E4). E1 engine is very old and is not compatible with the signature that runs on the E4 engine.

  Here are the release notes for 7.0.5a (E4):

  http://www.Cisco.com/Web/software/282549758/50172/IPS-7_0-5A-E4_readme.txt

  You need to upgrade the module running at least version 5.1 (6) E3 before you can upgrade to 7.0.5a (E4).

  Once the IPS module has been upgraded to version 7.0.5a (E4), you can update to the latest signature.

  I hope this helps.

• Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Try to update via iTunes.

  See you soon,.

  GB

• I lost the toolbar that displays 'file' 'view' 'edit' etc at the top, it is impossible to follow your instructions for using the 'View' option to fix my toolbars.

  I lost the toolbar that displays 'file' 'view' 'edit' etc at the top, it is impossible to follow your instructions for using the 'view' option to fix my toolbars. I have no idea how access toolbars without this toolbar - I can't believe this allows this toolbar to delete (I did accidentally while trying to get an another toolbar restored). Thanks for any help

  Hi toby,.

  on the assumption that you always have access to the navigation bar, right click on the stop button, when the home page is loaded and check the 'Menu Bar' option in the context menu that appears.

  If you need more help see the knowledge base article the Navigation buttons such as back, home, bookmarks and recharge are missing

  Daniel

• I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  What should do?

  bisso92,

  You must be more specific...  When you say that you want the cover to be visible when it is called, I suspect you mean sub - vi.  You can go to the menu:

  File > properties VI then select the appearance of the window, followed to customize and select "display panel when called.  You can also select close thereafter, while initially closed.

  There are other "tricks", such as the incorporation of secondary school within your main VI, in this way, you can see both.

  Normally, a hand VI (or main function in other languages), would still present so that the operator can perform other operations.  If so you should look at using a Structure of the event with a producer / arrangement of consumer, where the consumer in a loop has the case structure where the sub-vis.

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thank you

  Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thanks in advance

  Just a thought...

  It may be interesting to try to open Movie Maker and go to...
  Tools / Options / compatibility... tab and left click of the
  "Restore all defaults" button / OK.

• in hotmail, I can't pass on all messages that the coordinates and the message is not transferred to the new email.

  In hotmail, I can't pass on all messages that the coordinates and the message is not transferred to the new email. However, this works in Windows Live Mail. I use Windows 7 64-bit and 64-bit internet.

  Hello Brian,.

  There is a forum located there that is specifically for Windows Live Hotmail problems. Here is the link:
  http://windowslivehelp.com/product.aspx?ProductID=1

• Windows 7 computer said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  Original title: Windowscodecs.dll missing

  IM using a windows machine 7 and one day, he said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  I don't have to go back, any system restore points

  I ran the/scannow sf in command prompt and it says that the file is corrupted.

  I tried to put the machine in safe mode,

  I tried troubleshooting and software update

  and I tried to download external software to replace the file.

  It also affects the Aero theme, so my background is just a black screen!

  What else can I try that actually work?

  Why we just know it is a virtual machine?  Well...

  Have you looked on your system here to check that the file is actually missing (of course that mine has been replaced):

  

  I downloaded a file called on my OneDrive:

  64bitcodecs.dll (64-bit version)

  The link to my a drive is:

  https://onedrive.live.com/?ID=EC673DF6F8DFEE84%212368&CID=EC673DF6F8DFEE84

  You must visit my OneDrive, upload this file to a place, you can find, rename it to WindowsCodecs.dll and then copy and paste in your c:\windows\system32 folder (assuming that Windows is installed on your C drive).

  When you have done so, check again with Explorer that the file is really there (if it was missing before) and if everything looks good, reboot your system and see what things look like.

• Remote Desktop - due to the protocol error detected at the client level (code 0 x 1104), this session will be disconnected

  Original title: Remote Desktop

  I get strange messages when trying to do Remote Desktop (and also connect using Logmein). Sometiems I get this:

  Due to the protocol error detected at the client level (code 0 x 1104), this session will be disconnected.
  Try to reconnect to the remote computer.

  Sometimes:

  Due to an error in data encryption, this session will end.
  Try to reconnect to the remote computer.

  For Logmein, I just get a mismatch. I'm running Windows 7 Pro sp1

  Can someone help here?

  Hi Peter,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  Windows 7 IT Pro category

• ORA-01659: impossible to allocate MINEXTENTS beyond 2 in the tablespace test

  Hello

  I created a table and tried to insert records over 2 million and I'm getting an error such as ORA-01659: impossible to allocate MINEXTENTS beyond 2 in the tablespace test.

  Used tablespace percentage is only 73%.

  I used below when creating table

  tablespace TEST

  PCTFREE 10

  INITRANS 1

  maxtrans 255

  Please suggest me how to solve this problem.

  Thank you

  Suri

  Hi @Suri

  I see no problem in storage settings in your table.

  But the number of rows helps you insert and in the free space in your tablespace.

  Perhaps too much space is needed for your data and storage space can not support.

  The only things you can do is the following:

  (a) try PCT_INCREASE to 0, this product extensions to equal size.

  (b) put the PCT_FREE less than the default of 10. But it is advisable if you make updates to your table.

  (c) maybe create your table with the clause compress, just for bulk inserts, but this depends on the use of the table.

  (d) ask your DBA to increase the data files of the TEST table space or add more data files.

  (e) using the package DBMS_SPACE, you can calculate the space used by your table in tablespace TEST. g 10 and later versions.

  See the following example:

  
  SQL> SET SERVEROUTPUT ON
  
   SQL> DECLARE
     lc_tablespace       VARCHAR2(100)  DEFAULT 'CC_TBSD001_MOVI_DOMICILIOS';
     lc_megabytes        SIMPLE_INTEGER DEFAULT 1024*1024;
     lc_estimated_rows   SIMPLE_INTEGER DEFAULT 45000000;
     lc_pct_used         SIMPLE_INTEGER DEFAULT 10;
  
     l_cost_columns           SYS.CREATE_TABLE_COST_COLUMNS;
     l_mbytes_to_be_used      NUMBER;
     l_mbytes_to_be_allocated NUMBER;
  BEGIN
    l_cost_columns := SYS.CREATE_TABLE_COST_COLUMNS(
               SYS.CREATE_TABLE_COST_COLINFO('NUMBER'  ,15)
              ,SYS.CREATE_TABLE_COST_COLINFO('NUMBER'  ,10)
              ,SYS.CREATE_TABLE_COST_COLINFO('NUMBER'  , 4)
              ,SYS.CREATE_TABLE_COST_COLINFO('VARCHAR2', 6)
              ,SYS.CREATE_TABLE_COST_COLINFO('VARCHAR2', 4)
              ,SYS.CREATE_TABLE_COST_COLINFO('NUMBER'  , 1)
              ,SYS.CREATE_TABLE_COST_COLINFO('NUMBER'  , 4)
                                                    );
  
     DBMS_SPACE.CREATE_TABLE_COST(lc_tablespace
                                 ,l_cost_columns
                                 ,lc_estimated_rows
                                 ,lc_pct_used
                                 ,l_mbytes_to_be_used
                                 ,l_mbytes_to_be_allocated
                                 );
  
     l_mbytes_to_be_used      := l_mbytes_to_be_used/lc_megabytes;
     l_mbytes_to_be_allocated := l_mbytes_to_be_allocated/lc_megabytes;
  
     DBMS_OUTPUT.PUT_LINE('Megabytes to be used: '||TO_CHAR(l_mbytes_to_be_used));
     DBMS_OUTPUT.PUT_LINE('Megabytes to be allocated: '||TO_CHAR(l_mbytes_to_be_allocated));
  END;
  /
  

  A few ref, pleas read

  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/clauses009.htm#SQLRF30013

  Hope this can help you.

  Kind regards

  Juan M

• just upgraded to Windows 10. My lightroom (point 6.1.1) no longer respond (hangs) when I pass it draws to develop the module.

  just upgraded to Windows 10. My lightroom (point 6.1.1) no longer respond (hangs) when I pass it draws to develop the module.

  (I also update to the latest version of LR)

  Reach:

  Edit > preferences > Performance

  Disable the GPU acceleration.

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-GPU-FAQ.html

• Hello! We have formalized an annual subscription CC adobe, but show adobe that long three days, payment has passed, but we cannot receive the online chat, document does not. What is a problem?

  Hello! We have formalized an annual subscription CC adobe, but show adobe that long three days, payment has passed, but we cannot receive the online chat, document does not. What is a problem?

  Hello

  We do not have any active subscription under your account.

  Please share the following details in a private message so that we can help you properly.

  Order no:

  e-mail address:

  Thank you

  Varun