Impossible to recognize the second disk hard when it is connected to the motherboard.

Similar Questions

• I have recently in the last 24 hours, updated my OS to 10.11.3. The problem I have is that it no longer recognizes my second monitor. When I go into my poster in system preferences there is no detection monitor botton to press as shown in the help screen.

  I have recently in the last 24 hours, improved and install OS 10.11.3 it no longer recognizes my second monitor. When I go into display in system preferences, there is no monitor to detect Botton appears in the window in the described help screen. Does anyone had this problem after the update? Is there a solution?

  Video Troubleshooting internal and external monitors

• drive external hard when it is connected to the computer says hd not formatted want format you?

  drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

  Hi keo1,

  We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
  See check your hard drive for errors

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Second disk hard cable/accessory

  Hello world

  I have a HP ENVY laptop 17TS and want to add a SSD drive.  I see that there is an empty drive Bay.  Where can I find the cable/connector and associated kit disc?  I could not find on the HP.COM site.

  Thank you very much in advance,

  Dinesh

  Hello
  
  
  
  To add an SSD in your laptop. I have included the "HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP ENVY TouchSmart 17 Notebook PC - Maintenance and Service of Guide". Disk hard page 48, it will give you references of different readers compatible with your system. Who is marked as hybrid are the HDD and SSD. Thus provides you with instructions on how to connect the SSD to the laptop.
  
  
  
  So, I have also included the document, "On Solid State Hard Drive. This has different bits of information, to the maintenance and verification of the different parts of the material.
  
  
  
  Please let me know if this helps, thanks.

• My PC does not recognize my camera digital camera when it is connected shows so not used transfer screen appears automatically. How to restore this ability?

  PC is HP Pavilion a805n.  The camera is HP Photosmart R707.  Windows XP has been able to recognize the camera connected the first time that I used it without additional entry. No software is required.   It displays automatically transfer a transfer screen which gave the guests who helped all the images from the camera to the computer. It worked fine for a long time.   I guess that the fault lies with the computer, for example Windows XP and not the camera, which works well.  But it's the computer otherwise.

  Hi William,.

  When you connect the camera to the pc, check your workstation to the new drive letter, right click on this drive-> properties-> Auto Run tab-> select 'ask... '. »

  I hope this helps.

• XP does not recognize a second IDE hard drive.

  Summary:
  Added a PATA IDE drive so both are on the same cable.

  System information:
  IBM ThinkCentre P4 2 .66GHz (bought in 2005 approximately)
  Upgraded RAM from 1 GB to?, pin DIMM 184 form factor.
  Hard Drive IDE 1 x 40 GB - Standard - ATA-100-7200 RPM.
  Genuine XP; SP3 downloaded and installed by me.
  MT - M 8187-WBK S/N: KCGL5NB
  8187 is a type for a M50 number.

  My assumptions of hard disk:
  It is Setup to have a disk of expansion under the DVD with separate IDE cables and no doubt when both these are used you are in a primary + secondary situation.  I think that I am looking to get a configuration 'Double' where both are on the same IDE cable.

  Action:
  Removed the floppy drive and put the old HD in its place; It is the primary IDE hard drive.
  Put the new HD located under the old and attached the new cable at the same time.
  Use the power connector of the DVD on the new drive; I could so far to an extension of the extra drive Bay.
  I checked the BIOS boot menus, but could not see anything that needs to be changed.

  Problem:
  The system shows no signs of the new command.
  It still shows the floppy drive.

  I hope you can help,
  Peter

  USB is not supported, and even if that were the case, put the file on a USB drive would significantly reduce the performance of Windows.

  To speed things you can locate the swap file on a separate partition (should be the first partition, about 10 GB is more than enough) on a second hard drive.

  J W Stuart: http://www.pagestart.com

• Satellite A200 (PSAE6E) - Impossible to recognize the WLAN driver

  Hello

  I have a Satellite A200 PSAE6E with Vista.
  I want to just install WXp and erase Vista.

  When installing Xp, everything is Ok, except that my computer does not recognize my wireless card...
  Still, after the boot sequence, windows desktop appeared and a message: new hardware found...
  When I decide to do an automatic search and install... nothing.
  When I look in the control panel > Device Manager
  In the "Other devices" section appears: with a yellow network controller!
  And can't find a good driver...
  In properties, detail sheet, it is written:
  PCI\VEN_8086 & DEV_4229 & SUBSYS_00008086 & REV_57\...

  I have download all the drivers from toshiba (for XP) Download Center and I also try to download Intel drivers... NOTHING...

  Please if someone can help me...
  François

  You have installed Windows XP SP2 home edition?

• HP G72 laptop: HP G72 laptop does not start, error code of disk hard when you use HP Diagnostics

  I have a laptop G72 and it will start, but Windows 7 does not start. On using diagnostic tools in the start menu, my hard drive and my departure fail their tests, with both giving me this error code:

  UCUFWF-56C81D-XD003G-60WF03
  

  No idea what this means? Help is appreciated.

  Hello

  You are welcome

  Your computer is listed as coming with a 320 GB hard drive, but you can also easily install a 500 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, see if you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• Installation of Windows XP on a second disk hard SATA and booting from it.

  History:
  I have a two year old computer and it becomes slow to start.  Its a P4 dual core 2.8GHz with 3 GB of RAM and a hard drive SATA 320 G, that left only 60 GB.  I tried to uncheck all unnecessary items at startup using msconfig, but its still quite slow.

  Proposed solution:
  I bought a new HDD SATA of 500G and I thought performing a new installation of Windows XP on the new drive and boot from that.  I want to leave the old disk, as is if I can still access the programs and files that I have on this subject. That said, I will migrate probably all programs and regularly used files on the old drive on a new and let all my media files on the former.  I don't want to copy all just above (picture disc) because it will bring all the junk with her.

  I backed up my important data to an external drive.

  Issues related to the:
  Is there a problem to have windows XP on both drives?  Will I need to do anything to access my old programs on the start menu in a "new window" - what do I have to reinstall or can I just copy them into folder "program files" the new windows?  What is a reasonable way to speed up my machine?

  Thank you very much for your answers.

  You want to move the old SATA disk to controller 1 (although leave of you for now disconnect) and put the new drive on controller 0 and then install XP. Then set the old drive to the secondary SATA controller. You will need to install programs on the new drive; You may not copy or use the old disk. To stay in compliance with the EULA and activate the new XP successfully, you need to remove the old XP and just use the old disk to store data. MS - MVP - Elephant Boy computers - don't panic!

• Cannot access files on disk hard when it is used as external drive (sata)

  My motherboard in my laptop died. When I put the HD in an external enclosure and plug it on my desktop through the external SATA it appears as a disk and I can access the files in public USERS but when I try to access the files under my user name it is said that they can not be opened. Y at - it some way around that. I just want to get my photos and my things off do not use the drive. Can you help me?

  Appropriating the files/folders:

  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click on OK

  MS - MVP - Elephant Boy computers - don't panic!

• Second disk HARD support interface cable and for DV7 3110ea

  I apologize if this has already been covered here.

  I need a support cable and HDD to fit a second HDD SATA interface. I think that HP 611935-001 part for the interface numbers and 532591-001 for support.

  Can anyone confirm this and possibly suggest somewhere that I could not them since partmaster HP site wasn't much help.

  I found a few of these parts online providers and prices vary from about £ 22 to £35 each. I would like to make sure they are the right parts before ordering.

  Problem solved, I have since found the parts on ebay and mounted the second hard drive.

• 3 or more files are saved on disk hard when you use notepad.txt, xp pro

  why more than 1 file is saved

  rent.txt paid text desktop folder file

  paid rent.txt (2) in the recent folder shortcut

  paid rent.txt (3) in the recent folder shortcut

  paid rent.txt (4) in the recent folder shortcut

  paid rent.txt (5) in the recent folder shortcut

  paid rent.txt (6) in the recent folder shortcut

  rent.txt paid in recent folder shortcut

  rent.txt paid in recent folder shortcut

  above is the result of my research, but the research does not show the list to be a shortcut. When you navigate to the folder, it is listed as a shortcut? But why so many shortcuts? Often the changes & re save file?

  I encrypted file & then did the research to make sure that no copy of existed?. That's when I got a list of files with the same name?

  Thanks for the help!

  What you have above is nothing else than a bunch of recent shortcuts in the My Documents folder.  Only * real * file.

  My Recent Documents shows just what files you have accessed recently - with a shortcut to this file.

  My first suggestion - delete it:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;307875

  Personally - I would turn off so it would no more shortcuts.  It is not known for its accuracy or stability (you can atest to.)  http://labnol.blogspot.com/2006/08/disable-recent-documents-history-to.html

• C# examples fail with "Failed to recognize the type of server or the version when connecting to the host"

  I am currently submitting work for P2V conversion from a c# application. I tried to run the application remotely and on-site, but I get this error message (here is the full error):

  "< detail > < InvalidArgumentFault xmlns =" urn: Converter ' xsi: type = "vim25:InvalidArgument" xmlns:vim25 = "urn: vim25" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" > < vim25:faultCause > < vim25:fault xsi: type = "ConverterNotSupportedConnection" > < hostName > RSMITH < / hostName > < / vim25:fault > < vim25:localizedMessage > impossible to recognize the type of server or the version when connecting to the host "RSMITH". " < / vim25: localizedMessage > < / vim25:faultCause > < / InvalidArgumentFault > < / details >

  RSMITH is the name of the machine with the VCenter Converter Standalone (5.0) and where I wan the VM to go. It's a Windows 7 SP1. I'm under .net 4.0 winform.

  Any suggestions? I'm pretty much run the sample out of the box, except for wrapping a winform around it instead of an application console.

  Cannot you telnet from your Converter machine on the source IDE oucederomsurlesecondport 9089 machine?

• BitLocker without TPM refuses to recognize the USB key at startup.

  I have a Windows 7 PC, I'd need to BitLocker, but it fails to recognize the USB key at startup. I've resorted to skip verification and now enter the recovery key every time you start (this PC has a lot of data on what should be confidential), but it's not ideal.

  What is curious to me, is that the computer will start perfectly fine from a USB key, or produce a message of type "non system disk or disk error", if the USB key in question is not bootable. So it is not a matter of lack compatibility USB BIOS. When Bitlocker should read, yet there is no actifvity on the USB key. It seems to just try to read the empty floppy drive then give up.

  The PC is an all-in-one RM with an Intel D915GX motherboard.

  I tried two different USB, 64 megabytes cheapo player drives I usually use as a Bitlocker key and a 2 GB Cruzer Blade. I mucked with some of the BIOS settings but not in a particularly organized way. And I checked the key file is saved on the disk. Everything I did, Bitlocker will not always see the USB.

  Any suggestions?

  Hello

  Thank you for you answer and share the status of the issue.

  Sorry for the late reply.

  I suggest you to please update your motherboard chipset drivers

  Follow the link below:

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProdId=1676

  You can also check the drive (that you encrypted) to find errors by following the link below:

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  WARNING:

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Additional information:

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  http://TechNet.Microsoft.com/en-us/library/ee449438 (WS.10) .aspx #BKMK_USBDrive

  Deployment Guide for Windows 7 BitLocker Drive encryption

  http://TechNet.Microsoft.com/en-us/library/dd875547 (v = ws.10) .aspx

  Hope this is useful

• HP dv7 will not recognize the second hard drive

  My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.

  Main hard drive is a 1 to install a second hard drive to 500 GB.

  Hello

  Try the following.

  Judgment of the laptop and unplug the 2nd HARD drive.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this is finished, stop the laptop.

  Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.

  Kind regards

  DP - K