Impossible to record with Audacity

Screen turns off after a certain time when no keys used - Audacity to stop recording?

When you are recording in Audacity, the screen is blank after a few minutes, and the recording is interrupted. This means that I have to keep close to the computer and press a button from time to time. Any help would be greatly appreciated.

Jim

Maybe the problem is with your power management settings:

The following article can offer a few ideas:

Disable on Windows 7 or Vista power management
http://www.howtogeek.com/HOWTO/Windows-Vista/disable-power-management-on-Windows-Vista/

Tags: Windows

Similar Questions

  • Satellite L650: Impossible to record with Audacity or free sound recording software

    I have a L650 and I can't save anything with Audacity or free recorder it only shows the Conexant microphone and line (WsAudio_DeviceS (1,2,3,4 and 5))

    If I record only from the Microphone Conexant CX20671 Sm

    I went into Control Panel and tried to update the drivers etc I am running Win 7 32 bit

    Hello

    Hmm, I think that's not possible because of the audio chip Conexant.
    As far as I know it supports stereo-in.
    I have a u400 with Conexant audio chip too and I can't record music using tool no. 23.
    But my other laptop A210 is favorable because it s equipped with the Realtek sound card.

    By the way; to be 100% sure that this is not available, you can check the Panel of-> sound-> the Read tab. Here, you must right click and should mark the option; view hidden devices, see the disabled devices.

  • Satellite A200 - 1SM PSAE6E - impossible to record with an external microphone

    Hello.

    I have problem with my microphone, maybe not microphone but my entry into the laptop.
    When I connect something to the entrance, and I start the program to save, there is nothing to just silence, and when I log off (microphone or something like that) program is sound recording.

    I don't know what is happening. I turn off the drivers of the device...
    and I reinstall audio drivers, maybe more just, I have format my computer and still nothing.
    Seriously I don't know what the problem...

    Please help because I'm going crazy :D

    Hello

    I recommend checking out the settings first.
    In Control Panel-> sound, you should check the volume of the microphone.
    The volume must be set to the highest level.

    In Control Panel, you should also find the Audio from Realtek Manager. There you can change some options too.
    On the right side (right column), you'll find options called advanced settings. Here you can change the settings for the headphone and microphone Sockets.

    By the way; don't forget that your external microphone to which you connect to the laptop is ok

  • Satellite U400 PSU44E: Impossible record with Conexant Smartaudio 221

    It has been possible to record audio streams on the net with Audacity.
    After an upgrade to Windows 7 and updates for the drivers it is no longer possible. The sound has disappeared. Of course, I can always save the stream off the card, but only at a very very poor quality.

    It is a problem of Toshiba and sound card. I can still save on my other computer with another sound card. As I need to register to work, it is a serious problem for me, and there should be warnings when customers update.

    Is there a way to get around this? Are there patches?

    Guenter

    Hey,.

    Before you start a lengthy discussion, can you please put the number of exact model of your laptop?

    If you have this problem only with the new sound driver you should go back to the previous version of the driver ;)

  • listen to online audio while recording with tape recorder

    I use the sound recorder, with a signal line. Is there a way to monitor the audio while it is registered?  That would be really helpful so I can change parts of the audio that I don't want.

    vista operating system

    Hello

    To save as you describe computer must have the ability of full-duplex sound and it
    do not have. Check with Support from the manufacturer of the system, online documentation, and
    their forums (if any).

    If a PC, you can add a sound card with this ability and remove the card present or
    disable the sound board.

    If the laptop and your system does not have this capability there are 3 party USB sound cards
    available with this ability.

    Here's a Google maps USB sound - and there seems to be some with this ability.
    http://www.Google.com/#hl=en&q=USB+sound+cards&AQ=f&AQI=G10&aql=&OQ=USB+sound+cards&gs_rfai=&FP=ca6b5a4f84435186

    Maybe this will help you:

    http://www.recordingreview.com/soundcard/soundcard_wizard.php

    Also check out the "getting started with Home Recording" link on the right - it must
    to register but it's free.

    http://www.recordingreview.com/articles/blogs/76/A-few-notes-about-PCI-sound-cards-and-audio-interfaces.html

    There are probably other sites like this one and I don't know which is best.

    ----------------------------------------------------------------------------------------

    You also need software with more features than sound recorder to check these.

    Audacity - free
    http://Audacity.sourceforge.NET/

    Free Audio Editor 2010 - free
    http://www.free-audio-editor.com/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Cannot save in Windows Sound Recorder or Audacity

    restoration of the registration system,

    Please don't tell me to go to the audacity with this problem. THEY SENT ME TO YOU. People of Audacity have not been able to help me with this problem.

    My computer refuses suddenly registration of Windows recorder or audacity, almost all sources. Also, she refuses to perform the system restore, no matter what point I choose to restore. This is when the problem started:

    I installed Skype just to maintain my balance. I don't know why! I stopped using their years in favour of Gizmo. Anyway, I forgot to uninstall immediately and tried to launch Audacity. By request of my client, I tried to get Audacity to an entry instead of mono stereo. I got an error saying input and output devices must be of the same type. I click on ok, and now the computer refuses to record in almost all cases.

    I checked all my settings. Line is activated. I use a small mixing console in the line-in on the back of the tower. This configuration has not changed since the beginning, several years ago. No cable have been changed. No material has been moved. I tried all possible combinations in/out.

    Old projects loading and very well read. Freecorder works very well. Frontmic does not work. USB mic does not work, but I could never use mediocrity. There's a hum in the background and it has always been like that. For my work, I have to use the line. Also, I need to use other sources of input in addition to just my mic, so I need the mixing table, and of course, this requires line in.

    Can help you?

    I have re-installed on disc and now it works. Skype should be more forthcoming on what settings they change.

  • The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

    My O.S. is W.7. 32-bit.

    Before, I recently upgraded to XP and using MS Word 2007, I have a (short) Sound Clip of pre-registration<60 secs. )="" and="" then="" insert="" it="" into="" my="">

    A small icon that looks like a speaker appeared on the Document and that the beneficiary would have left click on it to hear the recording. The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

    Is this even possible or has Microsoft taken a step backward here?

    I'd appreciate some help here. Thanks in advance. Mech-Tech.

    Original title: Sound Recorder

    If I've understood your problem, try this. Create a shortcut to "soundrecorder /file outputfilename.wav" (without the quotes).

    Then start soundrecorder via this shortcut and start and stop the recording, it will save so (hopefully) as a wav as before.

    I think the problem is, W7 soundrecorder, by default, saves to wma.

    If not, try a 3rd free part program such as Audacity (which seems like overkill, but should do the job).

    I hope this will help.

  • Can not get Sound Recorder or Audacity to record in Windows 7

    I tried troubleshooting both programs, but neither one will record. His fate both mic & speakers. Any idea? Drivers? Updates? Encoders? Thank you

    I followed the procedure in the Audacity forum:

    • Windows Vista, Windows 7 and Windows 8
    1. Right-click on the icon "by the system clock" speaker, and choose recording devices to open the recording of "Sound" tab
    2. Right-click anywhere inside the recording tab and choose "Show disabled devices" then right-click again and choose "show disconnected devices".
    3. Right-click specifically over the input device you want to record with (in this case 'Stereo Mix' or whatever the solution you have) and if it is visible, choose 'Activate'.
    4. It is sometimes useful to right click on the "stereo mix" or similar device again and choose "set as default device".
    Even so, I wasn't able to save.
    Then I click with the button straight on the "speaker" icon and click on Volume Control Options, and found that the box near the speaker has not been verified.  Once I checked it, I could sound speaker recording on Audacity.
    If you find that the sounds of the microphone are also being recorded, you must click with the right button on the microphone in the recording devices and disable.
  • Can Notes show the number of records with each folder?

    Can Notes show the number of records with each folder?

    No it can't. It would be nice tho.

  • I want to record with &lt; alt &gt; &lt; s &gt; in the Exact program online. This function does not work. This is the first time I use this program with firefox.

    Question
    I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

    edit, escaped mod < s > in order to avoid the line through question

    A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try

    ALT + SHIFT + S

    and see if it works.

    I don't know of any way to change this so that the change is not necessary. There may be an add-on?

  • Camileo P10 - record with door closed?

    Hello!

    Y at - it all the parameters or option to save with door closed (LCD)? I plan to mount P10 bike and record with door open is not better configuration for me. Not to mention that the battery with the door closed, probably last longer.

    Thank you!

    Anyone?

    Maybe if someone know is - it possible to P20 and P30, and how to enable this option?

  • Locate computers I recorded with HP?

    I'm trying to find out which computers I recorded with HP. I don't have a product # or # of series on the a because it brought on the back and it may be one of those involved in a recall. I have three others who have bought the same month and al the information but I wanted to get the nfo on the last of them.

    Is anyway to do this on the site of HP?

    Thank you

    [Personal information]

    I've never seen major manufacturers like HP, Dell etc, do a search reversed for this, I think it would be a privacy issue if they did.

    On most of the PC from HP, you can look in the bios, set up screens to find the model and serial number.

    Some you fress F1 at the beginning of power on when you see the HP logo. Others, you use F10 to enter the BIOS.

  • recorder with variable unit

    Hallo!

    I tried to use the recorder with variable units. It does not it? Can I change the units of the recorder of the version of the runtime somehow?

    Thanks for your advice.

    Hilby

    Hello again!

    I found the solution:

    Even when it is not possible to use a variable in the context menu, it is possible to put a global string in the recorder manually. I put "${Unit_Ch1}" on the ground for the unit, and it worked.

    Have a good day everyone.

  • My MSN account was blocked and the other recorded with her email address is no longer active so I can't get a verification code.

    My msn account was blocked and the other recorded with her email address is no longer active so I can't get a verification code. What should I do?

    Hi Harryjenkins,

    I suggest you to contact MSN support for assistance on this issue:

    How to contact MSN customer service

    http://support.Microsoft.com/kb/940784

    You can also visit the site mentioned below and check if it helps:

    http://windowslivehelp.com/solution.aspx?SolutionID=283b059b-d26d-41f9-ae3d-03a07afcb4ad

     

    I hope this helps.

  • I can't record with sound recorder?

    I tried recording with tape recorder, but it says that I record with another application, but unfortunately I'm not recording with another application. Why is this happening? It's the same thing in camstudio. Please help me with this problem, I need start recording.

    Something is hijacking your system.

    Run your anti virus and anti malware.
    Download the latest audio drivers for your device from the site of the manufacturer. Do not install yet. Also download Ccleaner (Google it).
    Remove all references from your audio device (software and drvers).
    Re starting and running ccleaner, registry bit - but back up your registry first, and the value of a restore point, just in case.
    Re install your software and audio divers, re boot, everything should be ok.
    See you soon
    Jerry

Maybe you are looking for