Impossible to reinstall Lightroom 6 retail DVD.  Gives the error message "Windows Vista not supported."

Similar Questions

• I want to install Lightroom 6 on a Windows 7 operating system. I get the error message Windows Vista not supported. How to spend it?

  I've seen comments on this more soon but I can't find the discussion now.

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

• After that upgrade to 9.01 startup of firefox gives the error message mozcrt19.dll not found.

  After the upgrade to firefox 9.01 with windows xp, I get every time firefox tries to throw the error message "this application has failed to start because MOZCRT19.dll is not found. Reinstalling the application may fix this problem.

  Well, reinstalling does not fix this problem!

  I even uninstalled firefox, deleted all files with the hint of mozilla or firefox on his behalf and did the same with the registry, reinstalled firefox 9.01 but still get the same result.

  If you use ZoneAlarm Extreme Security then disable virtualization and reinstall Firefox.

  See for a similar problem caused by ZoneAlarm:

  • [880050/questions/880050]
  • http://KB.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update

• Impossible to delete the two files and shows me the error message windows does not properly

  Hello

  can't delete two files that actually a song file VLC webrib exdr video...
  cannot select the option to delete the time I click file tht it shows me the message "windows doesn't work maybe not properly" and the file stops immediately once that I close this error message... Please give me a solution to this

  Hi MakPatel,

  You can delete these files via the command prompt, if your window closes...

  (1) open the command prompt. (Click the Startbutton .) In the search box, type command, and then prompt in the list of results, double-click command prompt. )

  2) navigate to the download folder where the video file is present, using the "cd"command.

  For example, if your file is present in the "C:\Users\user1\Downloads".

  Type cd C:\Users\user1\Downloads and press enter in the command prompt.

  (3) Delete (Remove) the file name using the "del" command.

  For example, if your video file name is "sample.mp4.

  Led sample.mp4 type and press enter in the command prompt.

• Installed the program gives the error "target system is not supported.

  Hi, I had a program that works with windows 95,97,98, nt it is said. I can open ITC a folder but can't install it on my computer, I get an error msg 'target system os not supported' what should I do.

  Hello bkfarmer,

  You can try the Mode of compatibility as below:
  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows XP or other system that the program has been run successfully operating.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and run the program compatibility problems:

  1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button.

  Then click on Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• DURING THE INSTALLATION OF LIGHTROOM DVD 6;  SHOWN IN LIGHTROOM UNDER OPTIONS WITH A WARNING COLOR YELLOW INDICATING VISTA NOT SUPPORTED.  7 RUNNING

  DURING THE INSTALLATION OF LIGHTROOM DVD 6;  SHOWN IN LIGHTROOM UNDER OPTIONS WITH A WARNING COLOR YELLOW INDICATING VISTA NOT SUPPORTED.

  I'M RUNNING 7 WITH 4 GB OF RAM AND 30 GB OF FREE SPACE

  TOTAL INSTALL 0.0 KB

  GABRIEL

  Please see:

  System requirements for Adobe Lightroom for Mac OS and Windows

  You can try to run the application in compatibility mode:

  Make older programs in this version of Windows - Windows help

  Make the programs more compatible with this version of Windows - Windows help

  I hope this helps.

  Concerning

  Megha Rawat

• I just bought 6 Lightroom on DVD and it will not be installed. message says OS disappointed requirment, Windows Vista not supported. I have Windows 7, NOT in Vista. What is the problem?

  Just bought 6 of Lightroom and it don't be loading not - says OS requirement not met (whatever!) and Windows Vista supported nopt. I HAVE WINDOWS 7, VISTA NO. Add to my frustration, I can't just talk on the phone to ask a question, I have to go through any of this bubble.

  Try installing lightroom 6 on windows 7 get interface requirement not met windows vista not supported

• Whenever I try to connect to the internet, it gives the error message 651 windows 7

  Original title - windows 7 651 error

  I recently installed windows 7 and I use a broadband connection... Whenever I try to connect to the internet, it gives the error message 651 while I had no problem with this broadband connection in windows 8.1... How to fix this error, please help me...

  Hi Alexandra,.

  Please contact Microsoft Community.

  • You use a wired connection or wireless?

  Method 1: I suggest you use the resolution of the problems of the article below Internet connection and check if it helps.

  In Windows network connection issues

  https://support.Microsoft.com/en-us/KB/313242

  Method 2: Try disabling your antivirus software and then try to connect again and check if the problem persists or not.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

   

• I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message

  I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message "" an error occurred while the wizard attempted to set the password for this user account". I can't pass this screen and am virtually blocked the computer phone iam trying to access. What can I do? It comes to Windowns 7 Home Premium

  This probably means that your password disk drive is not up-to-date. Here are the other options built into Windows to help you get out of this situation:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• During the installation process of 6 of Lightroom, I get a box that says: Windows Vista not supported.  I have Windows 7 with Service Pak1. I meet all the other requirements listed.

  During the installation process of 6 Lightroom, I get a box that says 'Windows Vista not supported'.  I have Windows 7 with Service Pak 1.  I meet all the other requirements listed.  Any ideas?

  Hi Chuck,

  You can check out the link below.

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope this will help you.

  Kind regards

  Hervé Khare

• My laptop does not recognize the cd/dvd drive, gives the error message 19 and cannot load/reload driver TSST. Any suggestions?

  Device Manager says: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).»  Mr. Fix - it (Microsoft) indicates the CD/DVGW TSSTcorp TS-L632M ATA Device drivers & filters are corrupted or damaged.  Mr. Fix - it could not download the updates/drivers for TSST.  Mr. Fix - it has been able to get the computer to recognize, but unable to take the function of CD/DVD.

  Hello

  Perform the following methods and check if it helps.

   

  Method 1:

  Please run the difficulty of following article and check if that helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

  Method 2:

  You can read the following article to see what might cause this problem.

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052/en-us

  If you had recently upgraded the computer to the Vista operating system or install the Service Packs, then try the steps as described in the following article.

   

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/  

  Hope this information is useful.

• You try to run Cyberlink downloader to install updates Power DVD but the error message: visual c ++ error library time time to run

  Two days ago, I try to run cyberlink downloader to install the latest update for power dvd (compatible with win 8) .but every time appear the error message: visual c ++ run time time library sleeves application error - the requested to terminate it in an unusual way.what can do? I have the problem with the update.the only specific support has me unistal all visual c ++ redistributable, reinstall program.but had tried the remain.i problem and the security mode.any solution please?  I have win 7 x 64

  Hello

  You can get this error because of things:

  1. The Visual C++ library runtime components are missing. (You should of reinstalled after remove them because this software requires their)
  2. A problem with this software, it is possible a conflict with another software.

  If the problem is caused by #1, you can reinstall the latest version of the Visual C++ Library Runtime components and see if it solves the problem, but I do not know what version of the redistributable software requires.

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

  There is also a 2012 version of the Redistributable:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30679

• Satellite A215-7422 - restore DVD gives the error "03-EEEE-0000" 'press 'OK' to restart.

  Hi all!

  I'm trying to restore my Toshiba A215 in the way that it comes from the factory, because I messed with it so that it is not worth of clean install myself if I want to do a clean install of Vista original.

  But for some reason when I booted from the DVD and then chose the "Restore Wizard" or what ever and then it gives me error and makes me reboot. The only things I changed from the factory are a stick 2 gig of ram, latest version of bios and updated firmware for the DVD drive.

  I'm starting to think that the firmware of the DVD drive can affect the DVD because it is not a material commonly updated. I guess right here, but that might be the problem.

  Any thoughts?

  -A_DoNuT

  Hmm... Do you have you have downloaded and used the firmware and the BIOS from the Toshiba page we?
  Satellite A215-7422 belongs to the American TV series and therefore you must use the drivers from the Toshiba driver page we.

  Have you tried to install the OS by using the original CD of Microsoft Windows?

  This allows to know if this problem could be linked to the issue of CD/DVD drive (firmware) or corrupted RAM modules.

  According to your post above, the new RAM 2 GB module has been inserted.
  Perhaps you should withdraw and should try to install the operating system using the original modules were installed in the laptop from the beginning.

  Check it out

• creation of DVD Windows guard give the error message indicating the error occurred when burning the dvd

  I'm trying to use creation of Windows DVD to burn a DVD. The program starts in mode "coding" and after a minute or two, I get an error message informing me "cannot create an error has occurred when burning the DVD DVD»  Can someone tell me what to do?

  "DVD burning speed. This option allows you to select the speed to burn your DVD. The default value is the fastest growing. Some DVD burners do not burn at full speed if you use certain types of DVD. If you have a problem burning a disc, try selecting medium or slow. "Also try another brand of blank DVD.

  Change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-AU/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  See if there is another program interfering.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

• Thunderbird won't start, gives the error message of compatibility

  When I try to run Thunderbird, I get an error message that says:

  "Error: platform version ' 38.4.0 ' is not compatible with
  minVersion > = 38.3.0
  maxVersion < = 38.3.0

  The version of the file that is listed is 38.3.0.5749 and the version of the product is 38.3.0; last updated 10/5, apparently.

  reinstall everything, your mail and the setting will not be affected and any other file is corrupted will be if all goes well replaced.