Impossible to reinstall the printer

I DOWNLOADED MY NEW PRINTER, BUT IT didn't WORK SO I WENT in AND DCELETED the PRINTER turns OFF MY LAPTOP AND THEN TRIED TO REINSTALL it BACK ON MY LAPTOP BUT IT WON'T ' T.hOW I PASSED CE AND the INSTALLER CORRECTLY.

Thank you

Hello

Please do NOT post in all capitals

It is very difficult to read

and when you say it won't let you: how he won't let you?

Try right-clicking on the printer software - run as administrator

Tags: Windows

Similar Questions

  • Photosmart 7520, impossible to reinstall the printer after removing software

    Name of the product and operating system: Photosmart 7520, Windows 7 32 bit.

    Description of the problem:

    I tried a lot already if the description is quite long, bear with me here.

    At the beginning everything worked well. After a few months, the printer was not capable of scanning more computers in the network. He could identify them, he was not able to transfer the scanned document. Printing from computers was still possible. I did first network tests, even reset network to factory settings, but everything was fine. Try to solve this problem, I ran HP print and scan the doctor, the program gave me a twain scan error and was not able to fix it. Because it was not able to fix it. I uninstalled the computer HP printing software, reinstall the printer completely and try if it works. Digitization (magicly) now works on my other computer, but I can not reinstall the printer on the computer where I uninstalled the software, because it is impossible to find the printer on the network. I also tried to connect the USB printer, without a bit of luck. I think it's a driver problem, because the computer seems to have many 7520 drivers broken out there. I hope someone has a way to help me, because I don't know what to do anymore...

    Try to run Malwarebytes to see if your PC has installed any villains

  • 8.1 win and J4680c all-in-one: impossible to reinstall the printer drivers.

    I followed all instructions for re - setup my wireless network, uninstall the printer drivers and reinstall printer drivers / (including all renamed to .old .dat files), but once it gets to the installation wizard, in the phase of control system, it tells me:

    C:\Users\Patricia\AppData\Local\Temp\7zS41F0\Setup\hpzshlaut...

    System cannot find the specified file.

    What is c? I can't spent to complete resettlement, so I can't use all the features other than printing printer! Can anyone help?

    Thank you!

    Hello
    Follow the steps below and check if it solves the problem:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

    Now, try to reinstall the HP software and check if the installation goes as planned.

    If the problem persists, continue following the steps below:

    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7. run the installation file and check all difference.

    Kind regards
    Shlomi

  • wireless printer shows offline and impossible to reinstall the printer software

    original title: offline wireless printer

    my printer is offline and it wont let me not reinstall the software? I also restored the computer to a date where he worked and which did not help... It works when I plug in the usb cable, but not through the wireless... but my Wi - Fi works on the laptop... operating system 64-bit of Windows 7

    Hello

    1 did you recent hardware or software changes to your computer before this problem?
    2. what exactly happens when you try to install the printer software? You get the error message?
    3. what exactly happens when you try to print by connecting the wireless printer?
    4. What is the brand and model of the printer?

    Uninstall the printer drivers and related software, and reinstall them.
    Reference:
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
    http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  • I reinstalled win xp on my laptop but impossible to reinstall my printer samsung clp-320 wireless. help please

    I reinstalled win xp on my laptop but impossible to reinstall my printer samsung clp-320 wireless. help please

    Hello

    Thanks for posting this question in the Microsoft Community.

    To provide a proper resolution, I would need more information on your side.

    1. What is the error you get when trying to install the printer?

    2. after the installation of Windows XP, you have installed all necessary drivers?

    3. have you updated to Service Pack 3 installed?

    Please provide us with more information to continue troubleshooting as a result.

    Alternatively, you can also post this question to the Samsung support community: http://www.samsung.com/uk/support/model/CLP-320/SEE

    You can check this article to see if this help.

    Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

    Thank you.

  • When you try to reinstall the printer I hit find now and choose / click on the printer, but then he says: I mistyped the location

    (I'm asking this question in the installation, upgrade and activate rather than the hardware and the drivers because I think it's a problem with Windows, not the driver)

    I had a ton of problems with the computer of the person of the new. I did not originally put in place, but its maintenance fell for me. I've had this question before: http://answers.microsoft.com/en-us/office/forum/office_2010-word/office-2010-products-wont-print-and-computer-wont/4e92f903-8f25-485b-8316-332bb086a75d these are the steps I've lived first and I went through the "How to troubleshoot print...» "I can print in each program on the computer except Word. including other Office products. The only hold out is the Word.
    I had found a response that suggested that I have reinstall the printer. The printer is a shared printer and not a local. I get to the Find Printers dialog box, select Find now and see the printer:
    I click on the printer that Windows has found and click OK, then it hangs for a minute and then, it returns this error message:
    How do I enter if I clicked it in the list? And how can we get the computer to find it if there is no location?
    Any help would be nice! Thank you

    If it is a printer that connects directly to the network by an ethernet cable, and is configured with its own Ethernet address (i.e.  do not connect directly to a single computer with a USB connection), then you might be connected the wrong way.

    In Control Panel, go to "Printers and faxes", then click "add a printer".  At the Welcome screen, click 'Next' and then on the next screen, select "local printer attached to this computer.  Specifically, resist the temptation to click on "a network printer.  Do not click the box "automatically detect...". ", and then click"next ".  On the next screen, click on the button "Create a new port" and then in the "Type of Port" window, select "Standard TCP/IP port".  Then click on "next".  Another wizard starts.  Click on "Next" at the Welcome screen.  On the next screen, enter the TCP/IP address of your printer on the top line.  The second line fills automatically.  Click on 'Next' and then 'Finish '.  Wait a few seconds and from this point of exit, the choice should logic.

    I hope that this will improve the way things work.

    HTH,
    JW

  • Z6200 - printhead status: unknown, impossible to load the print heads.

    Hello

    I am a user of HP DJ 5500 long and just before Christmas, we have invested in a Z6200. Right now, I have a problem that happens with him because he is stuck in a loop trying to replace the printheads.

    I spent some time trying to reinstall the print heads and I tried the suggestion for the Z6100

    Nothing I've tried has been able to clear this loop. Is there a way to do a hard reset, then insert the PH as new? Or is that what makes the above method? Right now, I'm off the printer and the print heads on.

    Any help would be appreciated massively, I had to do this thing up 3 flights of stairs and still have not actually seen print!

    Remove all the ink cartridges and the print head if you don't have it already. Turn on the plotter and you will be asked for supplies, don't know if the ink cartridges and printheads first. When it asks to insert the items one at a time and the blinking icon must return to solid. Maybe your have one or several heads wrong causing the problem. If it rejects a print head print head must be indicated on the display as to which one is causing the problem.

  • Try to reinstall the printer and will not install due to not having Admin rights

    original title: Instalation printer

    Try to reinstall the printer and will not install due to not having Admin rights. I am the administrator,

    How can I continue?

    Thank you

    Right click on the printer software setup.exe, etc > run as admin.

    See you soon.

    Mick Murphy - Microsoft partner

  • Reinstall the printer software?

    I have a HP Envy printer which has worked beautifully for a few years on my Windows 7 desktop pc. All of a sudden, it does not print. Message says it is 'offline', but the printer says it is connected to the home network. I see that an icon in the notification area indicates that the scan to PC app is "not available".

    Interestingly, I can print from a laptop Windows 7, which has been installed from the same CD - and notice it says "Scan - to - PCActivation App works ("Scan of the computer is on.").

    I was hours with a HP one after another tech support person. They made me pay $99.99 in advance, through all sorts of help desk services, and then abandoned. Whenever I asked a technical support if could perhaps help to uninstall and reinstall the printer software, they dismiss the idea. The fact that I can print from another computer seems to exclude a printer problem. Do anyone think?

    Download the drivers from the site / install them. See if they work.

    I have reinstall the printer, but I also disconnected and reconnected the router. The problem has been fixed, but unfortunately, I can't be sure who did the trick. However, I strongly suspect that my intuition, encouraged by your suggestion, was correct, and that the relocation of the "worked" printer software Thank you very much.

  • The printer indicates that online, my laptop said that it is in offline mode, I've deleted and reinstalled the printer and still the same problem,

    The printer indicates that online, my laptop said that it is in offline mode, I've deleted and reinstalled the printer and still the same problem, please help

    You are not quite correct.  Some newer wireless printers have only a wireless connection.  No USB port and a standard Ethernet cable port.

  • HP Officejet Pro 8600 Plus: I think I need to uninstall and reinstall the printer

    My printer started to print only if I turn it on, then go back on it.  I think I need to uninstall and reinstall the printer.  I have the CD, but not sure of updates.  This all started when my cable company came out to solve my problem of modem and saw that I was running my wireless printer.  He said that I should never do that, so I went back to USB.  When I did, the printer would not analyze.  I've switched back to wireless, but now I have the power problem.  Help!

    Hello

    Try the procedure described in this doc connecting the printer after change of your wireless network.

  • Impossible to delete the driver HP 8 files in repository under system32/driver store so that I can reinstall the printer software

    I used a freeware uninstall program with cleaned almost all traces of the HP drivers except these 8 files. When I try to delete in the context menu, then press the space bar, he said still "Destination Folder Access Denied". I have absolute administrative privileges in Vista Home Premium. How these files can be deleted ao I can reinstall the software/drivers for printer/scanner and I take advantage of my printer?

    Hi Don,

    Thank you for using the Microsoft Windows Vista Forums.

    I would recommend that you start your computer in safe mode and see if you can remove it from there.

    HOW TO START YOUR COMPUTER IN SAFE MODE:

    Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

    Click Start, Shut Down, and then, in the drop-down list, select restartand click OK.

    Do one of the following:

    If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again.

    If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

    In the Display Options Options Advanced startup, use the arrow keys to select the safe mode option you want and press ENTER

    Log your computer with a user account with administrator rights.

    When your computer is in safe mode, you will see marked Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

    If please reply and let us know if your problem is resolved or if you need further assistance.

    David O
    Microsoft Answers Support Engineer
    Visit our and tell us what you think.

  • Photosmart Wireless B109n-z: Impossible to connect the printer wireless to the new router

    I just changed my wireless router and can not get my printer to recognize the new router.

    When you try to reinstall with the disc that came with the printer it keeps "quit unexpectedly" at the end of the installation, but before I get to connect to the printer.

    The drive indicates that it is for use with Mac OS X v10.4; 10.5, but I can't find an option to update the web site HP despite it stating that my printer is still supported.

    I can still use the printer with a USB cable connected directly to my table, but this is no help for the other devices I have.

    Hi @Paulwrow,

    Welcome to the Forums of HP Support!
     
    I understand that you are unable to connect your HP Photosmart Wireless B109n-z to your new router wirelessly. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
     
    The CD/DVD software will not work with newer versions of Mac OS X. HP doesn't have the drivers for this printer in Mac OS X 10.11 El Capitan. The last driver out of this printer is for Mac OS X 10.6. The only driver available that uses the driver update from Apple. This causes a problem when reconfigure the wireless, as this is the software for help. It would be easier if you have another computer running an operating system that is supported so that you can install the full feature software to configure the wireless.

    As an alternative method, you can try doing as a guideline to connect the wireless printer. We will use the ad-hoc connection. With the ad-hoc connection, you can launch the built-in web server (EWS) to access the wireless configuration wizard.
     
    Use the following steps as a guide:
    Restore the default settings of the network:

    1. Press the button next to the wireless Menu.
    2. Press the button next to wireless settings.
    3. Press the button next to network by default.

    Once the network is reset, the printer should disseminate the ad hoc connection. It should look like "hpsetup" or "HP Setup (and part of the printer name or MAC address). With an IP address like 169.82.12.44.
     
    Then, connect to the network printer, that is broadcasting.

    1. On the Mac in the upper right corner, click on the wireless icon and connect to the network "HP Setup" or "hpsetup".

    Print the wireless test report:

    1. Press the button next to Scan.
    2. Press the button next to the wireless Menu.
    3. Press the button next to wireless settings.
    4. Press the button next to run the wireless network Test.

    Browse the test report wireless IPV4 of the printer (IP address) 169.82.12.44.

    1. Launch your internet browser and enter the IP as shown. This should load the printer EWS.
    2. Click on the tab network across the top.
    3. On the left side, click on wireless or network.
    4. Run the Wireless Setup Wizard.

    This is the only way to reconfigure the wireless, unless you have another computer that has supported the software.

    For more information on the ad-hoc connection, see the User Guide.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • How to reinstall the printer pixma150

    I followed the instructions how to uninstall the printer, but how do I reinstall it please help me. I have the original disc supplied with the printer, but it does not start in the disk drive.

    Hello

    You can check the links to see how to install a printer.

    https://support.USA.Canon.com/kb/index?page=content&ID=ART161312

    http://www.Canon.co.UK/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mp_series/pixma_mp150.aspx?type=FAQ&Search=1

    http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-8

    Thank you.

  • MSIExec error when you reinstall the printer drivers

    Hello

    Recently I had to uninstall and reinstall the drivers for my printer since Windows went crazy and did not leave the printer accepts the Word document to print. But what installation it shows MSIExec error (image below). I tried to uninstall all the goodies of the printer (apps and help center), attempted to clean the registry manually with regedit and tried to change the data USB connector. Without success.

    Since I live in Czech Republic, use Czech version of Windows and install Czech, the text shows in Czech. The important thing is below.

    What is a kind of this error and that means the return code? How to fix?

    With the help of color printer LaserJet M175a MPF on Windows 7 Ultimate 32-bit edition 100...

    Need help please, quickly, I need to print an important document...

    Hey @Polda18,

    Usually the error 'an installation operation took too long to run"are related to the file system on your computer. There should be no reason you have to increase the RAM of your computer. Clean the registry is not a bad idea, but I'll offer a few steps first under your normal user account.

    Step 1: Install by using HP Smart Install:

    1. press on the power button or switch to turn off the product, if it is not already turned off.

    2 unplug the USB cable from both the product and the computer, if you already connected.

    3. press the power button or turn the product on.

    4 reconnect the USB cable to the computer and the product

    The HP Smart Install program should start automatically. Follow the on-screen instructions to install the software.

    If this also fails, proceed to the next step.

    Step 2: Disable Smart Install:

    1. On the front panel of your printer, select the button "Setup" (the key)
    2. Under the Setup menu arrow right over into the Service Menu and select OK
    3. Under Menu Service to 'Smart Install' on the right arrow and click OK
    4. Under the Smart Install please disable this feature, then select OK

    Once install Smart is disabled, continue with the next step.

    Step 3: Run a selective startup on the computer:

    1. Click on the start menu and in the box "search programs and files", type in msconfig and press enter
    2. A box of the System Configuration utility will open now. Under the 'General' window, select "Selective startup" and only to uncheck "Load Startup items".
    3. Click on the 'Services' tab at the top
    4. Select the checkbox at the bottom to "hide all Microsoft Services"
    5. Select 'Disable All' on the right
    6. Select apply then OK and restart your computer when prompted

    Step 4: Run a SFC/scannow:

    It is an analysis which are running on your computer. It should identify all the corruption of the system it will tell you. Should the request of scan that you insert your operating system disk, this indicates that you have a corruption of your computer and your operating system must be reinstalled.

    1. Go to your Start menu and type CMD
    2. CMD will fill in the option above, made a click right on this and 'run as administrator '.
    3. When the command prompt opens, type sfc/scannow and press on enter
    4. Allow analysis of fill and take note of any errors, it may impose a fine
    5. Restart your computer once the analysis is complete

    Step 5: Run the Windows updates:

    Please ensure that all of your Windows updates have been completed.

    1. Open Windows Update by clicking on the button start , clicking all programs, and then click Windows Update.

    2. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

    3. If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Install Windows updates

    Once these steps are completed, try to reinstall your software and drivers. Please let me know if this procedure resolves the problem. If you end up getting any other error messages please let me know. Good luck!

Maybe you are looking for

  • Satellite C70D-A-11 t - sound does not work with HDMI

    Hello I buy a Satellite C70D-A-11 t and pass it on Windows 7 64 bit Home Premium edition.I have install all drivers, and I have no problems. When I want to connect it to my TV for the first time, I discovered that there is no sound on the TV.I try to

  • Re: Satellite Pro M70 - cannot save a voice

    I can't record voice using the Accessorise-online entertainment-Sound Recorder online it will give clip of silence In addition, I can't record voice message in Messenger, it can not detect the voice Thank you

  • 5660 want: Instant ink subscribe

    I enroll in the instant ink and print 50 pages was charge $ 5 each month, so I decide to unsubscribe and try to just buy cartridge usually. Is this possible or what is the solution for this? I can just buy regular cartridge which c go for $ 35 and I

  • C710-2856 vs c710-2833

    Can someone tell me what the difference between the c710-2856 Chromebook vs c710-2833? I printed two cards and they are exactly the same, why have two templates if they are identical? Thank you, David

  • Installation of Windows OEM 7.1 of the drive on the new computer

    I bought a new HP Envy of Costco 750qe with operation system Windows 10 because it came with a graphics card from Nvidia with 4 GB of Ram, nice Intel core i7 and 24 GB DDR 3 Ram. My first computer was a KayPro 10 CPM and over the past 15 years, I had