Impossible to reinstall Windows XP error: BSOD STOP: 0X0000007E (0XC0000005, 0XF78DA208, OXF78D9F08)

Original title: BSOD

tried to reinstall windows xp bsod STOP: 0X0000007E, (0XC0000005, 0XF78DA208, OXF78D9F08 * pci.sys_address more numbers to several numbers and a date stamp.)

Advertisement

Hello

1. How are you trying to install?

2 do you use a full version Windows Setup disc or the recovery disk?

3. at what stage of installation you get the error message?

I suggest you try the steps from the link below and check if it helps.

http://support.Microsoft.com/kb/330182

Additional information:

How to fix a computer that does not start: http://windows.microsoft.com/en-US/windows-xp/help/setup/how-to-fix-computer-that-will-not-start

Hope this information is useful.

Tags: Windows

Similar Questions

  • Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD

    Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD

    Said event system category 102 event 1003 error view

    Error 1000007e, parameter1, parameter 2 8070194f, parameter3, parameter4 f78da92c f78dac30 c0000005.

    Customer says that has happened for about a year.  Don't know it please help

    Hello

    Use BlueScreenView, MyEventViewer and other methods of troubleshooting BlueScreens
    See the responses in this thread - high two answers.

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/842fa8cf-535e-4b5d-9416-85eb31edbe6f

    ----------------------------------------------------------

    References to Vista also apply to Windows 7.

    This error (7th) is usually a driver problem and display adapter (video) driver is the most suspicious if
    It could be others. Antivirus/antispyware/security programs, major software and hardware (heat)
    questions can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my
    generic methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
    For a complete list of exception codes, see the Ntstatus.h file located in the inc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem
    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    Make sure you have enough disk space.
    If a driver is identified in the bug check message, disable the driver or check with the
    Reference of the manufacturer for driver updates.
    Try changing video cards.
    Check with your hardware vendor for updates to the BIOS.
    Disable the BIOS memory options such as implementing caching or shading.
    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug switch... This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the/debug switch.

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    List of Microsoft Windows Marketplace tested products.
    Service system or driver faulty device. A service driver or defective peripheral system can be
    responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    and IRQ conflicts can also generate this error.
    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and .chk files files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x0000007E<-- read="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    -------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • BLUE SCREEN of DEATH error CODE * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4)

    I just tried to turn on my computer and I got the black screen that gives you the choice to start in Windows XP or the Recovery Console, and when I click Start in Windows, it loads and then I get a quick death blue screen displays a down error code, and the computer restarts automatically. When I disable automatic reboot in the advanced options I get the blue screen showing this code: * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4) I tried this code on Google and got no results. I'm sure that I don't not miscopy, I checked several times.  I tried to start in safe mode, but then I get a black screen with many codes (w-a-a-a-a-y-y-y a lot to copy down) and the computer restarts. Someone knows what to do? I have a lot of important files out there that I just can't lose. Thank you! Any help or advice is appreciated.

    Alex

    While this error can be caused by malware infection, it's commonly found when the RAM failed. In all cases, you want to go down the data files before you do anything else. Do this with one of the following methods:

    1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

    2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

    You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

    * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

    http://www.Knoppix.NET
    http://www.nu2.nu/pebuilder/ - Bart PE Builder

    When you have your data safely, get hardware troubleshooting with the RAM before reinstalling Windows. There is no point in trying to install Windows if your material is not good.

    http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows

    And for future disaster recovery programs:

    http://www.elephantboycomputers.com/page2.html#Backing_Up

    If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

  • WinXP error message Stop: 0x0000007E (0xC0000005, 0x00000000, 0xBA50F7C4, 0xBA50F4C0)

    Dear technical support

    I have a laptop running Windows XP Home edition SP2, just installed iTunes version 10.2.1 for iPhone 4. With the iTunes app runs in the background when you plug the iPhone 4 on the laptop USB port, blue screen with error message about the likely BIOS execution cache shadowing... or VGA card with the following information;

    Stop: 0x0000007E (0xC0000005, 0x00000000, 0xBA50F7C4, 0xBA50F4C0)

    I need help to solve this issue.
    Thank you.

    Jason

    Download bluescreenview install race it. What did he say? I would also like to upgrade to SP3. Because SP2 is no longer supported

  • blue screen with error code stop: 0x0000007e (0xc0000005, 0x805e492e, 0xf96793bc, 0xf96790b8)

    blue screen code error 0x0000007e

    http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e http://support.Microsoft.com/kb/330182

    http://support.Microsoft.com/kb/953356

    Or more articles in this search:
    http://support.Microsoft.com/search/default.aspx?mode=r&query=0x0000007E+XP&spid=global&catalog=LCID%3D1033&1033comm=1&Res=20

    Hope one of these AIDS. QQ learn manage!

  • Error while installing windows Xp on my E Aspire 13 ES1-311-C4VK. Error is STOP: 0x0000007E.urgent pls help

    I tried so many times to install windows xp on my Aspire E 13 ES1 boot cd - 311 - C4VK.Xp first, then load something. After that, it shows the error:

    STOP: 0X0000007E (0XC0000005, 0XF73B9D66, 0XF78D9EA0, 0XF78D9BC)

    ACPI.sys - address F73B9D66 base at F73AE000, DateStamp 480252 b 1.

    I need urgent help.

    And another thing, I want that it is not possible to change the sata ACHI to ide mode. Isn't it possible to change?

    Why windows XP?

    It is not longer supported by Microsoft and other SOFTWARE, and it is the best OS to have viruses, rootkits and other infections.

    you will be also problems of drivers/hardware as acpi.sys

    If you need windows XP for some old software, try to use a virtual machine or buy a second hand laptop.

  • Blue screen, ERROR * STOP: 0x0000007E (0xC0000005, 0x824EC033, 0x88F03650, 0x88F0334C)

    Hi, I turn on my laptop with windows Vista Home Basic (Compaq) and I get a blue screen with this error:

    STOP: 0X0000007E (0XC0000005, 0X824EC033, 0X88F03650, 0X88F0334C)

    I tried with safe mode and all the options that windows and compaq gives, but everybody works, do you know what I can do? I want only the files in the hard drive, there is a solution?

    Thank you

    I used a Windows XP Live CD to backup my files, clean the data and reinstall Windows Vista... because I can't correct the mistake x_X

    Thank you anyway ^^
  • Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

    Help.

    I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

    I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

    I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

    Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

    I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

    STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

    Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

    Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

    I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

    My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

    I tried a few options in the BIOS screen as well, but no dice.

    Help! Before shipping the brand new...

    I thank you and have a wonderful new year.

    Craig.

    Howdy Daavee and Shekhar,

    I hope that your day is going well.

    It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

    Craig.

  • Blue screen error STOP: 0x0000007E (0xC0000005, 0x8Ac18874, 0xF792A468, 0xF792A164)

    Original title: blue, impossible to restart screen

    System: Dell Dimension 3000, Windows XP Home - SP3.

    Problem: I recently installed the new memory (now has 2G), check that the memory has been recognized and work.  Computer worked fine for several hours, with a noticiable improvement.  Then received warning from McAfee "A Trojan had been identified" and the computer had to be stopped to fix.  Not sure if this was related to the new memory, but the moment was just a few hours apart.  When I tried to restart the computer - I got a blue screen of death with the following technical information: * STOP: 0x0000007E (0xC0000005, 0x8Ac18874, 0xF792A468, 0xF792A164).  I can't start the computer in safe, except the Mode modes safe mode with command prompt and to my level of skills making me much good.  Please notify.  Thank you.

    Hi mysticskier,.

    Follow these methods.

    Method 1: Disconnect all external devices such as printer, scanner, etc.

    Method 2: Follow the steps in the article.

    You may receive a Stop error on a blue screen when you start a Microsoft Windows Server 2003-based computer or a Microsoft Windows XP-based computer

    http://support.Microsoft.com/kb/893239

    You receive a random "0x0000008E" error message on a blue screen in Windows XP

    http://support.Microsoft.com/kb/827663

  • How can I fix this stop: 0x0000007E (0xc0000005, 0x25FFCCCC, 0xF78E10BC, 0xF78E0DB8

    I have the cd for reinstallation of operating systems, windows xp professional with service pack 2, but it came when I tried to reformat stop: 0x0000007E (0xc0000005, 0x25FFCCCC, 0xF78E10BC, 0xF78E0DB8.

    Hi Sir mike,

    1. you receive the error message during formatting of the hard drive or reinstalling Windows XP?

    This problem may occur if a system thread generates an exception that the error handler does not catch. This exception can be caused by the following:

    (a) If this issue occurs after the first restart during Windows Setup, or after installation is complete, the computer may be not enough disk space to run Windows XP.

    (b) the computer BIOS may be incompatible with Windows XP, or it might have to be updated.

    (c) the video card drivers may be incompatible with Windows XP.

    (d) a device driver or a system service might be damaged.

    (e) if the problem is associated with the Win32k.sys file, it can be caused by a control program remote third.

    See the Microsoft articles below and check if its useful.

    How to troubleshoot a Stop error 0x0000007E in Windows XP

     

    http://support.Microsoft.com/kb/330182

    Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"

    http://support.Microsoft.com/kb/953356

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • STOP: 0X0000007E (0XC0000005, 0XF17FC30B, 0XF8AB7ADC, 0XF8AB77D8)

    Computer was working fine, then the screen became all monochrome (but not blue, off-white).
    This occurred during a comprehensive analysis of Microsoft anti-virus program «Securities Essentials»
    The computer is itself kept running as I could hear the ongoing fans and LEDs are stayed on.
    Unable to see anything or if she was responding to keyboard or mouse movement entries I turned it off.
    When the computer reboots, initially it seems to be OK, going through the process of the usual display of Windows XP on startup. He was even on the screen where it shows the different user accounts. But then 2 seconds later got the following error message:

    ----------------------------------------------------------------------------------

    A problem has been detected and Windows has shut down to prevent damage to your computer.

    If this the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow

    the following steps:

    Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or

    Check with the manufacturer for driver updates. Try changing video cards.

    Check with your hardware vendor for updates to the BIOS. Disable the BIOS such as caching memory options or

    the occultation. If you need to use Safe Mode to remove or disable components, you restart the computer, press F8 to

    Select the advanced startup options, and then select Safe Mode.

    Technical information:

    STOP: 0X0000007E (0XC0000005, 0XF17FC30B, 0XF8AB7ADC, 0XF8AB77D8)

    SiS163u.sys - address F17FC30B base at F17F8000, DateStamp 41ab05b9

    Beginning physical memory dump
    Total physical memory dump.
    For more assistance, contact your system administrator or technical support group.

    ----------------------------------------------------------------------------------

    Probably from about 5-7 years old eMachine race T1150 pre-installed Windows XP Home Edition.
    1.30 GHzz/celeron to Intel processor.
    What follows is also on the case - "3D Intel Direct AGP Graphics", I think it's the chipset.

    No new material has been added or deleted in over a year.
    Recently the Microsoft "onecare.live.com" scan and difficulty.
    After that, I installed the Microsoft «Securities Essentials» Supposedly without concern for quality, virus protection for your PC at home of Microsoft.
    It seemed to install OK and I could do a quick scan & difficulty.
    The problem occurred in the middle of the analysis I did later.
    Turned off and on again and received the same error message.
    Shot and a third time and got into safe mode.
    I tried "using last good known configuration", but I got same result.

    Also during the installation of Microsoft "Securities Essentials" uninstalled various antivirus programs (program at the request of the main titles") that were on the computer. One of them could have been something called EMCO Malware destroyer.

    Known solutions or ideas?

    FYI - the system and software came pre-installed & I don't think they gave me a CD with XP on it, so a solution that doesn't require you to put the CD in the dvd player is going to be my only option.

    You go to the website of the mftr. (Trendnet here) and download the drivers. It's the only place wherever you get them unless you have recorded the CD originally supplied with the unit. Usually, you can reinstall the drivers, but if there is an entry in Add/Remove programs and uninstall the device first.

    Incidentally, be proactive in preparing for the inevitable:

    http://www.elephantboycomputers.com/page2.html#Backing_Up

    I say this not to offend you in any way or to suggest that you 're not saving, but if you don't are not then you should be aware that your computer has gone its normal end of life, so be prepared to die. Certainly, he could go for years but OTOH it would not be surprising if he does not. MS - MVP - Elephant Boy computers - don't panic!

  • Blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)

    How to fix blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)

    These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

    If you are overclocking reset all default before running these tests.
    In other words STOP!

    1 - Memtest.

    * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. "http://www.memtest.org/#downiso"] Memtest86 + - Advanced Memory Diagnostic tool

    * Boot from the CD and let it run at least 5 or 6 passes.

    Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.

    Test the sticks individually and if you find a good, test it in all slots.

    Any error is indicative of a memory problem.

    If a well-known stick fails in a slot of motherboard, it's probably the slot.

    http://www.SevenForums.com/tutorials/105647-RAM-test-Memtest86.html

    2. Driver Verifier

    Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver. But sometimes it will crash and will not tell you the driver. Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

    I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems. Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

    In Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

    So, here is the procedure:
    -Go to start and type "auditor" (without the quotes) and press enter
    -Select 'Create a custom settings (for code developers)' and click 'Next '.
    -Select "Select individual settings from the list complete" and click "Next".
    -Select the entire document except for "Low resource Simulation" and click "next".
    -Select "Select driver names from a list", then click "next".
    Select all drivers that are NOT provided by Microsoft, and then click "Next".
    -On the next page, select "Finish".

    Restart the system and wait as he crashed to blue screen. Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you are unable to Windows because it crashes too early, try safe mode.
    If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.
    http://www.SevenForums.com/tutorials/101379-Driver-Verifier-enable-disable.html

    Further reading
    "http://support.microsoft.com/kb/244617"] using Driver Verifier to identify issues with Windows drivers for users advanced

  • Message Stop 0x0000007E (0xC0000005, 0xF880E9AC, 0xF89359B4, 0xF89356B0) when to stop or restart the computer.

    Original title: message of stop 0x0000007E (0xC0000005, 0xF880E9AC, 0xF89359B4, 0xF89356B0).

    Hello. I am running windows xp sp3 (sp2 initially update) when I try to stop or restart my computer I get a blue screen that says stop: 0x0000007E (0xC0000005, 0xF880E9AC, 0xF89359B4, 0xF89356B0)

    Kbdclass.sys-
    address F880E9AC
    F880E000 base
    datestamp 48025372
    Help, please.

    Hi monicashannon,

    1. are you experiencing this problem after installing Service Pack 3 or you have made other changes to your computer?

    2. what processor you have on your computer?

    You can follow this link & check if the problem persists:

    Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"

    Reference: How to troubleshoot a Stop error 0x0000007E in Windows XP?

    Hope the helps of information.

  • Stop: 0x0000007e (0xc0000005, 0f748e0bf, 0xf78da208, 0xf78d9f08)

    Original title: pci.sys - address f748e0bf

    Reloading windows xp and iam getting a blue screen. Technical information: * stop: 0x0000007e (0xc0000005, 0f748e0bf, 0xf78da208, 0xf78d9f08)

    PCI.sys - address f748e0bf base at f7487000, datestamp 3b7d855c

    I have a HDD 1terabyte.

    Hi matllamas,

    -Did you change on your computer before this problem?

    -What version of service pack of Windows XP you are using?

    Here are a few article which will help you to solve the problem:

    You receive a stop error 0x7E in Pci.sys

    How to troubleshoot a Stop error 0x0000007E in Windows XP

  • The installation blue screen: STOP: 0x0000007E (0xC0000005, OxF748E0BF, OxF78DA208, OxF789D9F08,

    Original title: cannot format the new hard drive because when I boot the system disk it stops with several STOP error.

    I am trying to solve problems with desktop Dell XPS 420 of my daughter. He started with the message 'bootmgr' trying to get the windows computer.  She ordered a new hard drive and when it was physically connected, I put put in place the disc in the computer to boot from to install windows XP, but it always comes to the blue screen with the following error: (I'm not an expert on computers so that any help must be in a very basic language).
    STOP: 0x0000007E (0xC0000005, OxF748E0BF, OxF78DA208, OxF789D9F08,
    PCI.sys-address F748E0BF base at F7487000
    DateStamp 3b7d855c

    I retried the boot and got the same error.  I check the forums online and they suggest that to go in safe mode.  I can't go in safe mode - do not have an operating system installed yet.  Some have said to change organic caching and shadowing.  I don't know how to do and I can't get into safe mode.  I don't know what to do.  Of course, the warranty was out - 2008 computer.

    Can anyone help or point me in the right direction? My funds are limited to pay Dell for the solution.  Thank you.

    MDT? Does not look good. See:

    http://www.computing.NET/answers/hardware/MDT-hard-drive/23869.html

    I still don't understand why you think that you need a new hard drive. There is nothing prevents you to install own XP on the old disk.

    If you can't find the right drivers (I don't know where to find them), maybe you can get in Dell's BIOS and change the hard drive controller affecting IDE or legacy or something like that. Then the new disc would work.

    Or you can simply put the back of an old man. You can either try to repair your installation of Windows with our help or opt to perform a clean installation.

Maybe you are looking for

  • Blue screen crash

    Hi guys,. Its a week ago my laptop started to have a problem with this blue screen crash. This blue screen appeared suddenly and forces it to close. At startup, it hangs at the start page. It appears the Hp Logo in the Middle East and "Press ESC to c

  • Stupid question? Impossible to spend between 2 globals VI "S".

    Asked me to do the three SCREWS 1 VI. I can't pass globals between 3 separate SCREWS? Return to 101 in lab mode can help. Philippe

  • Error code: 0x8007F0CC (cannot upgrade to SP3)

    try to upgrade to windows xp sp3 it begins to descend the load and approaches of error code

  • Utility HP crashes before I can change the crawl settings

    I use a Deskjet 3050 a all-in-One (J611j) on a MacBook Pro (OS Lion X 10.7.2).) The HP "Scan task" utility settings are for photos of 4 x 6 by default. I'm in change the setting and change the preset 'documents' and setting the orientation of the doc

  • Perspectives and Question blackBerry 9700 Smartphones

    I love my Blackberry.  I used Cozi to my calendar (cozi.com), but I'd like to have on my blackberry.  I need to sync it with office outlook.  I ask to outlook on my blackberry desktop or simply on my computer, or both?  Anyone? Help?  Thank you.