Impossible to restore the image of the back of the SATA drive

Similar Questions

• Impossible to restore the connection to a network drive

  I had to do a fresh install of XP Pro on a CPU in my network.  The server is windows 2000.

  I see the drive (H) network of the central unit, but I am unable to connect.
  I received an error message on impossible to restore the connection.
  I'm not sure what other details that I would need to provide the Forum to ask for the help that I need.
  Any suggestions?

  Check the permissions of the user against the share (network drive).

  Delete the drive mapping, and then try again.

• Satellite U400-112: impossible to format the local drive (damaged MFT?)

  Hello!

  I had a pretty serious problem with my HARD drive.
  250 GB HARD drive
  C: 116 GB - NTFS - Windows XP (Vista initially)
  D: 1, 5 GB - NTFS - (Vista Recover?..)
  E: 117 GB - RAW (was NTFS prior to crash)

  Local drive E: MFT have been damaged because of the virus attack (I hope not because of my madness!). It's NTFS, now it's RAW. I got all the necessary data partition with program ZAR, but all my attempts to recover or just the format E: remained unsuccessful.
  None of the defective sectors found on the HARD drive. Standard Windows tool to format the disks fails: 'it's impossible to finish the formatting of E:

  Before this problem with the E: drive, I had several problems with HARD drive. I have never divided re discs, to Partition Magic from the beginning he identified incorrectly. I tried Partition Magic 7 and 8.
  Link: [error screensaver | http://cs1498.vkontakte.ru/u169802/154397/x_3a82b4fb.jpg]

  The problem is that the special programs (I tried "find and Mount") also could not identify partitions to correct the defective MFT. I thought that low-level format can help me, but I heard, that the use of all applications for other producers can probably destroy my HARD drive. Are there only special applications of Toshiba developed for such cases? Or you can advice me something else?

  Thanks for your help!

  P.S. These applications did not help me:
  Find and Mount (can't find the HARD drive)
  Acronis Recovery Expert (does not find the HARD drive)
  OnTrack EasyRecovery Professional (does not resolve the error, but help to recovery data)
  HDD Regenerator

  Thus you get back all your important data?

  I would like to just launch Recovery to restore the HARD drive to its factory condition. If the recovery fails, you can try to delete the partitions with FDISK from a startup MS-DOS disk. Free bootdisks can be found at www.bootdisk.com

  FDISK can also repair a Master Boot Record by running this command: FDISK/MBR
  But it is not 100% reliable, it could cause more harm than good.

• TuneUp Utility has been installed on a trial basis, it changed the things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  On my old Dell with Windows XP I installed Tuneup Utility on an experimental basis, it changed things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  Anyone have a solution?

  Help, please.

  Software support to the YOU seem hopeless, they donot even read the request entirely to meet the last 8 weeks and many emails in series.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  Method 1:
  Try to uninstall the utility and check if it helps:
  http://support.Microsoft.com/kb/307895

  Method 2:
  Try to restore the computer to the point before you install the utility and check if it helps.
  http://support.Microsoft.com/kb/306084

  It will be useful.

• Where could I find, live disc or other to restore the HARD drive recovery partition?

  Hello I have an A300 system 9 1M unit.

  I need to restore the HARD drive recovery partition, I had to change the hard disk drive, because he's dead.

  Is there a link where I could download the files? IMG to ISO or any other program that can create a new partition for recovery on a new drive?

  This computer is not under warranty, because it has more than 4 years.

  Thank you for all the support you could give me

  SEB

  PS: second question: which little hard drive disk could I buy for this model? Wich, 2 1/2 hdd and sata connector? IDE? I do not know.

  Post edited by: Seaone

  Hello, I have another question, how do I recognize the type of connector of the drive in this laptop?

  It's a sata II or sata 3.0 compatible?

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• There is an option in the bios to set the sata drive * IDE *-mode?

  There is an option in the bios to set the sata drive * IDE *-mode?

  Grobi

  Hi dude

  That s a funny question.
  No, there is no option in the BIOS!

  Please understand that there are various interfaces to drive HARD. IDE and SATA.

  There is a big difference between the two interfaces and the function of the HARD disk on the motherboard controller, you could use a HDD IDE or SATA HDD.

  But you cannot connect a SATA HDD to IDE or IDE HDD controller for the SATA controller. This is not possible due to different hardware.
  This is not possible and that's why these BIOS settings are not available or don t exist!

  Good bye

• Satellite A300 - where can I find the SATA driver?

  Where can I find the SATA driver for Toshiba Satellite A300 1MW for Windows XP?
  I tried to find it here:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  There are a lot of drivers, but none for SATA.
  and here: http://downloadcenter.intel.com/
  Here I can't find appropriate for my model injector.
  Thank you in advance for your help!

  Hello!

  The SATA drivers are in the Intel Storage Manager, so you need to download this package.
  You can find it on the Toshiba site and on the Intel Web site.

  Check again for Intel Storage Manager Web sites.

  Good bye

• T7610 SAS (LSI 2308) precision controller - set the SATA drives?

  Hello

  The controller is SAS RAID LSI 2308 integrated in the T7610 of precision allows to attach SATA hard drives in a non-raid configuration?  I just realized this system has only TWO internal SATA connectors, but I need THREE internal SATA drives.

  What I was asking is if the SAS ports will allow the connection of SATA drives that are not used in RAID mode?  This way I can add my 3rd SATA HDD to a SAS ports.

  Thank you
  M

  We are experiencing the same problem/issue with the T7610 of accuracy by using the controller LSI-2308.  The end result that we would like is to have 2 drives separated - do not use the raid controller.  However, the CD Rom takes up one of the sata drive connections.

  Anyone been able to disable the raid and then controller, seeing the disks during the installation of windows needs to see?

  Currently, I have 2 blank drives (3 TB (ea.) and windows setup does not see the discs - but the raid controller load very well through the configuration.

  What should I do to get readers in windows?  There the meta that needs to be removed?

• Satellite P840 - impossible to restore the image of the system from 8.1 to win

  I have laptop Toshiba P840 accompanying windows 8.0.
  I created backups of DVD and USB

  After upgrade to 8.1 windows and backup images, I had a software problem and had to go back to a previous return in windows 8.1.

  Restore from the external HARD drive fails due to driver incompatibilities.
  Technical support advise to restore windows 8.0 and then switch again to windows 8.1
  Is there a better way to restore the windows 8.1 image?

  Is it possible to fill the boot usb (from windows 8 as the original) to 8.1 windows drivers?
  I am unable to create boot usb with windows 8.1 as the partition of hard drive has windows 8.0

  Thank you

  Modification of the original recovery image is not possible then I agree with technical support. For your new and clean OS installation should be the basic recovery image so install it again and then do the update for new Win8.1.

  Everything you can do in the future is to create the own Win8.1, but for this recovery image, you use some third-party software of the part.

• Windows complete PC Backup Image - impossible to restore the backup on my laptop after the restoration of the C drive.

  My user profile is not loaded correctly, and so Sony told me to do a restore of the C drive which took my drive C back to factory settings and lost all my programs and files.  I tried since then to restore the Windows Image backup I did on my external hard drive.

  I open backup and Restore Center, click Advanced Restore, click Advanced Restore again.  The box application to what you want to restore?  The only option is to files from a backup made on a different computer.  I click Next, and he said: select the location of the backup to restore.  Hard drive, cd or dvd option has already found new Volume (e), which is my external hard drive.

  I click Next again, and he says, select dates to restore from.  The only option in the box is dated 2008-01-12 14:14:34 backup location is not available.  My external hard drive has multiple backups on it, including the Windows Backup Image (which was the first backup, I did and it contains 152 GB), and so I do not understand this.

  I continue, and then click Next.  It now says select files and folders to be restored, but there is nothing in the box.  I have check the restore everything in this backup box and click Next.  I save the files restored to the following location - check and navigate to the C drive.  I also check both boxes: restore files to their original subfolders and create a subfolder for the drive letter.  I click on begin to restore, and then he said:

  Restoration was unsuccessful.  Error: the parameter is incorrect. (0 x 80070057)

  I'm desperate to be able to get my programs and files back on my laptop.  I don't understand why the restore function can not see my Windows Backup Image, and why this is so difficult.  I've read other complaints by users about this, but cannot find a solution.

  I look forward to hear from you.

  Thank you.

  Hi HGHFaith,

  I suggest you try the following steps:

  Step 1 : Clean boot the computer and then try to restore

   

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 2: Run Check disk to repair bad sectors on the hard drive.

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. type E: (external drive) and press enter

  c. at the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk/r

   Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Check whether the problem is resolved

  For more information, see the link below

  Restore your computer from a system image backup

  HTT://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to restore the MBR using Bootrec.exe

  I recently installed Ubuntu with Windows 8 so that I got dualboot. After a while, I decided Ubuntu wasn't my cup of tea, and I wanted to remove and restore the partition that it used for the Windows partition. I also wanted to restore the MBR. According to this guide , I have deleted the two volumes dedicated to Linux and extended Windows partition. When the computer reboots, I discovered that something had happened to the Grub - I guess I deleted something I shouldn't. It now shows the following during startup:

  GNU GRUB version 2.00 - 19ubuntu2.1

  Minimal BASH like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible completions of device or file.

  grub >

  Type the comand "output" translates a start meny quite similar to the old one (Grub):

  

  I can boot Windows as normal by choosing option 3. The USB at the bottom is my recovery disk. Booting from it, I can enter the command prompt. I tried all the options of Bootrec.exe as described here:

  

  However, it is always the GNU GRUB, which is displayed when you restart. I noticed that the /ScanOS and /RebuildBcd States that total identified Windows installations is 0.

  I also tried to export and delete the BCD store and then rebuild using the following commands:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  However, this is reflected by the following:

  

  Someone has ideas how to restore my old MBR?

  Update:

  After fully cleaning my drive, the Gnu Grub has disappeared. "Just remove my files" did not help.

  

• Satellite A500 - 1 G 0 - impossible to update the monitor driver

  I installed http://support1.toshiba-tro.de/tedd-files2/0/display-20100608161152.zip standard nvidia driver, but shows me device PnP standar with standard microsoft drivers and a frequency of 60 Hz
  Win 7 home.

  I think there should be print drivers and 75 hz frequency on screen

  Post edited by: Lias

  I think you think wrong. :)
  Why do you think that is 75 Hz for display?

  I have two laptops new and two of them have 60 MHz displays. Please note the two of them are installed with the original Toshiba recovery image so I can say, display driver 100% right.

  LCDs are standard parameters 60 MHz and it cannot be changed.

  I put t know what is for you the standard driver, but it turns out that your laptop is supported for Win7 64-bit only and right nvidia display driver you can find HERE.

  If I'm right, you try to use the same driver. This means that the driver installation was not completed successfully.
  What is the entry in Device Manager?

  By the way: why you need to install this driver again?

• Impossible to install the graphics driver reinstallation of my Satellite L850-1VQ

  Hello

  I have a Satelite L850-1VQ with AMD Radeon HD graphic M card 7670

  Due to a virus, I had to format my hard disk, recovery partition inclued. I installed windows back 8.1 from a generic disk of Microsoft. I have no problem to install windows or activate, but I can't just install a graphics driver. The one gived on Toshiba Support for Satelite L850-1VQ

  (http://www.toshiba.fr/innovation/dow...verLanguage=42)

  make my computer has a blue screen, then restard after every boot, there is frozen on my screen before shutdown the computer or unusable. I tried the latest driver by AMD ditribute but it's the same thing. Every time I tried another driver, I reinstall all windows 8.1 after formatting of the partition to be sure that a driver so make mistake with another.

  I got totally Formate and reinstal 6 times my computer yesterday, if someone can help me please?

  Thank you

  Have you installed Intel stuff at the beginning?
  Driver Chipset - 9.3.0.1021 and Intel Management Engine Interface 8.1.0.1263?

• How to restore the D drive without having to reinstall Windows Vista?

  Original title: reload drive D

  I was deleting files in the E drive and eveything inadvertainly demolished in the D drive.  Player D can be restored without reloading Vista?

  Hello gdlawson1,

  It is a question better directed to HP.  They would be in a better position to tell you if this is possible.

  Best regards

  Matthew_Ha