Impossible to run an application

original title: "to run this application you must first install one of the following versions of the .NET framework: __v4.0.30319__Contact your application Publisher for instructions about obtaining the appropriate version of the .NET framework."

Any help? I get following messages appears at Windows startup (Vista Home Prem). Sometimes, this will happen after starting upwards.

"To run this application you must first install one of the following versions of the .NET framework:
v4.0.30319
Contact your application Publisher for instructions about obtaining the appropriate version of the .NET framework.

I tried to reinstall v.4, but it doesn't matter what. I don't even know the specific trigger for this error or the program. Any help? Thank you!

Try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable, uninstall (or remove it from startup).  Another option is to solve the problem with this application if it is that you actually use.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

I hope this helps.  Keep me in the loop.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • Impossible to run my application on Z10 Simulator

    Hello

    I tried to run my application built on 10.1.0.1020 SDk on my Z10 Simulator, it did not work. Then I checked my Z10 Simulator and the version was 10.0.9.1673 which is older than my SDK. I tried on my Simulator of Q10 and it worked. If im a little confused here. Should I update my OS Z10?

    Momentics should provide the 10.0.9.1673 SDK in the update section. It is installed in my Momentics. However, if it is no longer supported you can install a later version of the SDK and a later version of the Simulator. The last Z10 Simulator should be 10.0.10.822.

  • Impossible to run downloaded applications

    I am a novice in computer science.  In the last two days, I tried to free up space to make my system faster, so I deleted some programs, add ons and extensions, thinking that I have no need of them (no list of what I deleted everything}.

    Hi Deanna,

    Use Disk Cleanup tool, my computer-> right click on your drive c-> properties-> disk cleanup to free disk space.

    You can also delete your temporary files in, click on Start-> Run, type & -> % temp %-> ok. You can delete all the files in... wll you not be able to delete some files, since they may be in use.

    Clean your cache of internet explorer, start-> settings-> Control Panel-> options Internet-> delete the browser history.

    What is the application you download and does not run now?

  • "Impossible to find a version of the runtime to run this application."

    I just bought a software Newnovelist 3. When I tried to open it, I learned that I had need of .NET Framework number blabla I downloaded, rebooted computer. Now I get "unable to find a version of the runtime to run this application? What is NOW? I appreciate your wisdom.

    Uninstall the .NET framework and reinstall the latest version.  The error in question is probably the cause of a corrupted installation or download of the .NET framework.

  • Error: ' ATL. DLL was not found"when trying to run any application.

    Original title: ATL. DLL was not found.

    I can't run applications in my pc someone in my house could not get into the computer and changed operating system to windows xp, which allows to be decommissioning of this t. Now, I get this message when I try to run an application: the application failed, because ATL DLL is not found, re - install the applicationmight solve the problem, but I get this message after you have re-installed and I don't know what else to do. Slow computer charges and freezing, something he has never done before. Same IE you have a problem, the only thing that works well, it is the remote assistant who helped me to get here and to him intermet, actually all of this with the dll thing started after I deleted the firefox browser because it froze the computer. Unable to restore my recovery utility, I tried a TI ran and told me it is impossible to get it back before I uninstalled firefox.

    Unfortunately, the support engineer technical 'expert' who is hired by the tips from Microsoft to run sfc/scannow will not help you.

    I would say that, as usual, the technical support engineer has not bothered to reproduce the problem and tried their own suggestion.

    If the atl.dll file is missing, sfc/scannow will launch but it does not work.

    It's just another wild goose chaseSupport Engineer.

    A lot of things will not work if the atl.dll file are missing.  System Restore will not work, Event Viewer do not work, you will not be able to get on the Internet, etc., until the file has been replaced.

    You try to run the system restore, you see the following message is displayed:

    Rstrui.exe - Unable to locate component
    The application has failed to start because ATL DLL not found.  Reinstalling the application may fix this problem.

    Try to open the event viewer, you see a message like this:

    MMC could not create the snap.
    MMC could not create the snap.  The snap-in may not be installed correctly.

    Name: Event Viewer
    CLSID: {975797FC-4E2A-11D0-B702-00C04FD8DBF7}

    Running sfc/scannow will be launched, but it will not run if the ATL DLL file is missing and you will see events like this in the event log (when you arrive, it works again):

    The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

    You can't get on the Internet using any browser.

    You have to somehow replace the missing or damaged file.

    The file might really be missing if he has been quarantined (actually deleted) by your antivirus not specified.  If the file is simply missing, you can just replace it and then later determine what happened to the file and decide what to do about this.

    You can search Windows on your system for ATL DLL and replace the missing file.

    THE ATL. DLL file must be in this folder (assuming that Windows is installed on your C drive):

    c:\Windows\System32

    Check and see if you can find the ATL DLL file in this folder, or if he's really missing, you will need to replace it:

    Depending on what applications you have installed, when you search for your ATL DLL system, you can find ATL DLL in several places on your system.  You must be sure get you the correct that belongs in c:\windows\system32.

    The most likely place to find a good copy of Atlant. DLL will be in one of these folders:

    c:\Windows\System32\dllcache
    c:\windows\system32\ServicePackFiles\i386

    Locate a copy of the correct Atlant. DLL from the file in one of these folders and copy/paste in the folder c:\windows\system32.

    Answered in the affirmative if invited to replace the existing file.

    There is a copy of the file on my SkyDrive, you can download a system not affiliated and then copy the file to a Flash DRIVE or a floppy disk and apply it on the afflicted system c:\windows\system32 folder.  Here's how:

    I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

    You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

    c:\Windows\System32
    c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

    Here is the link to my SkyDrive and you can get the file you need here:

    https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

    When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

    When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

    You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called atl when the name of the file should really be called atl.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

    You then put the downloaded files in the correct folders on your system.

  • cannot answer with impatience or send new email, "windows live hotmail impossible to complete this application.

    I can't answer or send new email and the message "windows live hotmail impossible to complete this application.

    IE 9 running on the Vista operating system

    How is this related to Windows Update features, Marilyn?

    You will find support for Windows Live Hotmail in these forums: http://windowslivehelp.com/forums.aspx?productid=1

  • New on Mac w/purchase of Pro. You want to run Windows applications. 8 vs 10?

    New on Mac w/purchase of Pro. You want to run Windows applications. 8 against 10 using virtualization?

    The two big names of virtualization are Parallels and VMware. They have a sort of leap-frogging each other in terms of features. Parallels has a fairly seamless integration between Mac and Windows.

    Your Mac is also already comes with Boot Camp, which lets you install Windows on a separate partition.

    ws-on-your-mac-boot-camp-vmware-parallel http://www.Macworld.co.UK/feature/Mac-software/best-virtualisation-app-run-Windo...

  • Is it possible to run an application Windows on my MAC?

    I have a new sewing machine, which connects via wifi to my computer for downloads, etc.  However, the software is only for a PC.  Is there a way I can run on my iMac?

    You must install Windows on your Mac. Either as a Boot Camp partition separate or in a virtual machine, such as Parallels or VMware. With the first, you start directly in Windows. For all purposes, your computer is a PC. With the latter, you use Windows in OS X, so the two BONES are available at the same time.

    There is also a CrossOver, which can run Windows applications to OS x without having Windows installed at all. But it of all or nothing if an application will run, uncertain, or not at all.

  • How to run an Application from Firefox?

    Hello
    I want to run an application from my Firefox browser, for example I want to run Notepad.exe from Firefox. I wrote the following program and it opens Notepad from Microsoft Internet Explorer successfully, but when I try to open the same page of Firefox, nothing happens. Firefox only opens it. Is there some sort of opening the Applications in Firefox? Kindly tell me how to open an Application of the Firefox browser.

       <script type="text/javascript" language="javascript">
           function RunFile() {
    
           WshShell.Run("C:\Windows\System32\KinectClothing2.exe", 1, false);
    
           }
       </script>
    

    Maybe the extension "external applications 2 buttons" at https://addons.mozilla.org/en-US/firefox/addon/external-application-button/ which is based on the extension of origin began by Torisugari over ten years ago.

  • Using AppleScript (run as application)

    I used automate this script:

    Tell application "system events".

    say 1 group of tabs in the window "Keyboard" of the process of "System Preferences."

    check the box "Use all F1, F2, etc. as standard function keys keys"

    tell the end

    tell the end

    I save this as an Application, but when I run the application, I get an error.

    "The"Run AppleScript"action has encountered an error."

    Is there anyone who can tell me how to solve this problem?

    I connect remotely to work on a Windows PC where I use Excel a lot.

    I'd really like to have a script for Quick-change my function keys settings.

    A reason to wrap the Applescript in Automator?

    Economy to try as an Application in Applescript

  • Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

    I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

    Here is a list of all the things I've tried:

    Running the application again;

    Move the installation to another folder application;

    Control date & time and it was already correct;

    Do the installation in safe mode;

    Installation of the upgrade of another user I created only for that purpose;

    The computer restarts and I tried install the upgrade several times;

    And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

    Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

    Please try installing again after taking each of these steps you have already taken it.

    Step 1

    Reset the PRAM from your computer.

    Step 2

    If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

    In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

    Triple-click anywhere in the line below to select:

    date 0801000014

    Copy the selected text in the Clipboard by pressing Control-C key combination.

    Quit Safari. You go back to the OS X Utilities screen.

    Select

    Utilities ▹ Terminal

    in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

    Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

    Quit the Terminal to return to the main screen.

    Step 3

    If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

    Step 4

    Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

    Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.

  • cRIO run multiple Applications?

    Is it possible to run multiple applications on a target cRIO?  Would they all need to be part of the same project in LabVIEW?  Can I set more than one as a starting VI or need to create a VI that would start up individule applications?  They are the basics of Ethernet and not to use or share any what I/O.  I looked around, but didn't see much information on this subject.  Thank you!

    Good afternoon Matt,.

    It is possible to run several applications on a target of cRIO as long as they are in the same project and do not exceed the capacity of the target memory. You can only mark a VI the sixth start-up, but, as you said, you have this VI call your other applications. You can find useful the following documentation:

    Programmatically launch an executable file or VI on a real-time controller

    http://digital.NI.com/public.nsf/allkb/A7DBA869C000B5AE862570B2007C4170

    Using VI server to run LabVIEW VI real time stored on a hard drive of the RT series

    http://zone.NI.com/DevZone/CDA/EPD/p/ID/4364

    Getting started with the Module time real LabVIEW

    http://digital.NI.com/manuals.nsf/WebSearch/12F0FF18FB1BB533862575AD00696100

    I hope this helps!

    -Ryan S.

  • Error when you try to run an application that worked when built with 8.6

    I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

    Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

    Hello!

    The same problem ?

    I talked with my local OR technical support team. The application now works without any problem.

    Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

    Best regards.

  • I can't run an application downloaded from the Internet.

    Hello

    I downloaded "GoogleEarthSetup.exe" application, editor-Google Inc. Since internet using the browser "Chrome". Now, while I go to run it, I'll have a message: unknown Installer error. And I can not run the application. How to solve the problem. I'm waiting for your advice, please.

    Respectfully,.

    Solvemachine

    Most likely, the download is corrupted.  Have you tried to download it again?

    Unknown error installing means that Setup produced an error that windows did not recognize.
  • Problems with DAQmx - tasks missing when I run my application on another PC

    Hello

    I use a NI USB 6009 and my program use DAQmx and different tasks for the input and output signal.

    I created an application and I want to run this application on another PC, which doesn't have the development environment, but the runtime engine and installed MAX. This PC is connected to the NI USB 6009.

    Now, I have the problem that the tasks are missing on this PC and I get errors when I run the application.

    I wonder why these tasks are not put into the application automatically? What should I do now? Can I somehow export tasks in MAX and copy them to the other PC? Is not complicate it?

    Hi Johannes,

    Have you created your tasks of measurement and Automation Explorer?

    If this is the case, you must export the file of configuration of measurement and Automation Explorer and then import it on the other computer.

    With LabVIEW 2010, you can import a configuration via your Installer file, but I don't know if you can do it with LabVIEW 7.1

    Kind regards

Maybe you are looking for