Impossible to select and place the Instrument Driver VI icons on the block diagram

I am trying to automate some of the RF measurements using a Rohde and Schwarz Spectrum Analyzer. I downloaded the Rohde and Schwarz spectrum analyzer pilot named 'rsspecan' version 2.6.1 for Labview on Rohde and Schwarz site to use in my version of the software labview 7.1.

I copied the files in the appropriate folders in the Labview software on the C drive files. I am able to access those files through the functions---> Instrument I / O---> range of Driver of instruments in the Labview diagram, but when I select the VI icon that I want to put, I am unable to place it on the block diagram. Instead of hovering under the cursor by clicking on the VI icon, by clicking on the icon of the VI has no answer whatsoever.

Any help would be greatly appreciated.

Thank you

Thank you very much for the help.

So, is there a way to get the above mentioned pilot online Spectrum Analyzer, which will be also compatible with LabVIEW 7.1, so that I don't have to go through the conversion of version Board?

Thanks again,

Vivek

Tags: NI Hardware

Similar Questions

  • Impossible to select and move the letters while playing 'Word with friends' through facebook

    Original title: play games

    During playback "words with friends" through face book... I can't select and move the letters on the touch screen without the screen, scrolling up and down.
    I need the touch screen to allow the movement of the letters c A C H, etc. on the game board without scrolling of the image of the screen!
    Several of my Face book games does not load completely without hanging... both Adobe Flash player and Windows are also perfectly up-to-date.
    Kind regards

    Hi Stephanie,

    Looks like you are unable to play words with friends on Facebook and also problems with other facebook games.
     
     
    Since you are faced with a design problem with the play on words with friends on facebook, I suggest you to contact the administrator of the game to get more information about the compatibility of the game in Windows RT. You can also ask if they provide latest app for the particular game.

    support.Zynga.com/Home/Words-with-friends
     
     
    I would also ask you to contact Facebook to get information about other games:
     
     
     
    Hope this information helps.
  • Whenever I try to create a text box indesign automatically for me and place the text in the middle.

    Whenever I try to create a text box indesign automatically for me and place the text in the middle. I can get the text moves if I play with the object ' menu ' detected block options, but it does every time. "

    Hello, welcome to the forum of InDesign. I'm a different Steve.

    What version of InDesign are you using? What operating system do you use?

    Tell us exactly how you create your text box (frame).

    The easiest way is to choose the tool of Type (T). Click and drag an image where you want to go.

    But, if you place the text to another program like Microsoft Word, click file > Place. Select the file and click Open. Drag-and-drop placement of text cursor to position it on the page.

  • Impossible to download and update the app on the iPhone 6 Plus

    Topic: impossible to download and update the app on my iPhone 6 Plus

    Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

    In addition, you can try to reset your settings.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

  • Whenever I have to press the C key on the keyboard if move my crursor at the beginning and place the letter C

    must always go back and remove the letter c and then place the cursor back to were I had left to and try to type the letter c again in the right place. I'm going there about 5-10 times before it will not send the cursor at the beginning and place the letter where it should be.

    Hi windancer,.

    It may be a problem of keyboard as Richard suggested.  If it's a laptop, it may be that you hit the touchpad when you type.  I suggest this because I used to do that myself when entering some letters on my laptop.

    If this is the case, there may be a control panel option to disable the touchpad when you type, or you could try to install something like touchfreeze (http://code.google.com/p/touchfreeze/), who will do exactly that.

  • Select and hide the query

    In Photoshop CC when I use select and hide the 'onion skin' filter does only rarely. Any suggestions as to why this could be?

    Works perfectly! I'm wondering now if I had the - ticked instead of +. Seems as if could be the answer and if it does not work in the future I'll check everything here first. Thanks for your time and your help.

  • Paint with white in selection and hide the workspace

    Hello

    I'm in selection and hide the workspace > discovers black & white. When you use the Paintbrush tool, how to switch between painting with white and black?

    With the Brush tool selected paint just in the black and white view and this is equivalent to paint with white. Now the alt key or option is equivalent to paint with black.

  • 4.0 ai2 - cannot select and copy the code from a package body when opened in read-only mode

    4.0 ai2 - cannot select and copy the code from a package body when opened in read-only mode

    He was connected/buggy. It is not fixed yet. But it will be.

  • How to set a menu of VI function to generate a copy of it self when it is move and dropped on the block diagram

    Is any way to put a VI that I placed on a palette in the menu functions to create a copy of it self when I place it on the block diagram?

    My example is as follows. I create a palette for a messaging configuration. The 'send message', 'message' and so forth will work normally with just called when necessary. But 'Create queues messge' must be specific for each instance, because I'm going to create a different number of queues each time I use it. (See system messages in queue OR for the "Continous Measument and Logging" model).

    So every time I drag and drop that VI (Create message Queues) in the palette, I want that it ask me where I want to save the VI.

    Is this possible?

    See you soon

    Henrik

    There is always the file-> new... that opens a new window.  You can have your models in this window by putting them somewhere (I can't remember where at the moment).

  • place an image on the block diagram

    Is there an easy way to place an image on the block diagram?

    To clarify, I would like one simple to paste a bmp or jpeg or png or other means on my block diagram to document the block diagram for future programmers.

    The way I currently accompish this is to create a constant of the photo on the diagram and running a vi separate to load an image in a window of the image, then using copy / paste to get the image in the photo correspondent in my block diagram.

    There's a way more simple, right?


  • Deleting the definition of Type casuses control a lot of misreferences and program in the block diagram errors

    In LabVIEW 2010, I have a Def Type control i.e. a Cluster with several other controls within the Cluster. Apparently, the references to the controls in the block diagram are based on the order that the controls have been added to the Type definition command. The side effect of this is that if a control is removed from the command of Type definition, many of the done Variable reference in the block diagram or now either broken, or worse still, refer to wrong control in the Type definition. These problems are quite difficult to find and fix.

    Comment: If you create a control of Type definition and make a Cluster. Now add any controls to the Cluster in an order, let's say A, B, C, D. Their types does not matter. Now use the Type definition in one or more controls on the front panel. In the block mark references to controls inside the Type Def would control on FP. Now return to the Type definition and remove the command B of the definition of Type. Now, lots of errors appear. Broken links. But worse still, you see old references to B that now refer to C and old references to C are now referring to the old references to D and D are removed altogether, etc..  This side effect is much more errors, broken links and misreferences than expected otherwise.

    How add and remove controls anywhere in a Cluster in a Type definition, at will, without creating a whole bunch of errors in program, broken links and misreferences for controls in the Type definition that have not changed?


  • LabVIEW: Null window... stopped to stranger on the block diagram

    Hello

    I have a pretty important program that has been written in Labview 6.0. Recently, we have upgraded to Labview 9.0 and this program has been exported to an executable file with the new version.

    When you run the executable file, I sometimes have the following error as seemingly random places. I was not able to crash when not to use the executable file. LabVIEW: Window zero. The first level VI ".vi" stopped to stranger on the block diagram of ".vi".

    I apologize for having empty on the names of vi, but I can't give names of vi, say what is the software or code. I can tell it uses NI USB-6212 IO cards, interfaces with the instruments of Rhode and Swartz and uses a lot of file i/o.

    I was hoping someone could give me a hint on how to debug such a mistake. I noticed that when this error occurs, the memory usage almost doubles.

    Thank you

    James


  • What is the best way to keep the block diagram / cleaning of façade?

    Hello

    I'm relatively new to Labview so I'm not able to say if I'm overloading my programs or make my too crowded block diagram. I was wondering if there was some ways to tell if I can simplify my programming just by looking (perhaps only experience contributes to these things)?

    I enclose my VI here. Currently, she is able to monitor the voltage and current of two engines. On the screen, you can see an indicator with the voltage and current values and there are cards that can display signals of different engines with a menu drop-down.

    The façade is pretty clean, in my opinion of novice, but the block schema seems messy to me, just at the first glance. I foresee a problem occurring in the future however. In the future, I will have the VI to monitor 50 engines globally. All of the programming will be the same as the one I have now, but it will have 50 indicators and unfortunately 50 times just about everything. I would like to avoid this, but I don't know how I did.

    I use a USB-6009. I use its four differential inputs to monitor the voltage and current of the two engines. In the future, I will get more units DAQ (25 in total because 2 motors can be monitored for each data acquisition). The new Renault will help will help with more resource space, but I think things complicate with the added option of 24 more Assistants of data acquisition (as used in my code).

    Thanks for any help you might be able to provide!

    Usually, it is above all the experience that will teach you the best methods for making your code to do pretty. I don't know anyone who is proud of his first application of claws. There are some resources out there to help with best practices, as that group on ni.com, but you will learn most of your own development.

    Your façade is superb. FPs in general really are to you. You can do it as ugly or pretty as you want. When you have a few controls in duplicate and the Group of indicators, you should use clusters and berries to simplify. You can use a bit of cleanup in this regard, but not much. In addition, I personally hate read red text unless it is a warning any.

    Your block diagram could use a little cleaning in a sense of modularity. You have a lot of repeated code, which you might consolidate in to a Subvi, which is used in multiple locations, or in a loop For. A general rule is to keep your block diagram within a single monitor. You should not scroll. Your application is quite simple, so it is difficult to BUMBLE

    Here are a few details on your block diagram:

    • Click with the right button on your devices on the block diagram and uncheck the "display as icon". You are welcome.
    • Operations on each waveform "(x*2-4)" / 16 in double ": create a Subvi and/or run the waveforms through a loop."
    • You do a lot of 2-element arrays and then indexing. Just replace the ones that have a Select node based on digital.
    • All your code runs every time, including the knots of your property at the bottom, which is not necessary. As you learn LabVIEW architectures, you will learn how to get around this with the initialization and the output of code, but for now, you should put a case around those structure for only when the engine numbers change.
    • I don't know how you're timing your main loop, but you should put a delay in there because you don't need the DAQmx node shoot as fast as your CPU will allow.

    There are videos of intro free that you can watch to learn what OR think in terms of coding and teach you some of the basic features and such. Here's a three-hour course, and here's a six-hour course.

  • How can I activate on labels in the block diagram, but not on the front panel?

    This question may have been asked before, but searching the Forum did not.

    In LabVIEW 2010, I have 16 indicators of chain on the front panel. I can't have the label for each Visible on the front panel, so I turned it off. But in the block diagram, I need distinguqish one of the other, so I need to make the label (name) visible.

    In the block diagram, if I select indicators Sting all together and go to properties and make the label visible, it makes visible labels on the front but not visible in the block diagram. What good is that?

    How the help of labels (name) of the indicators String visible in the block diagram, but not visible on the front?

    dbaechtel wrote:

    This question may have been asked before, but searching the Forum did not.

    Don't remember already asked this question and get help in this thread?

    Have you tried the things I said in that thread?  How did they not work?

    Right-click on the terminal of BD and make visible > labels.

    It probably will be the FP control show its label as well.  Then go to the FP control, right-click and go to Visible > labels and uncheck the box.

    The terminal of the comics will have a label, and control of the FP will not.

  • I want the programming palette appear everytime that I click right while in the block diagram

    I want the programming palette appear everytime that I click right while in the block diagram.  Right now I have to look at the dialog box Express, down arrow and then click programming.  I want the programming to bring up the first.  This should be very simple, but for some reason, I don't see the solution in help.

    go to tools...options...controls/functions... formatting palette

    Select "Icons only" and "category (standard)".

    Now make a right click and PIN the palette to get the button "Customize". Select 'change visible pallets... '. ' and click 'select all '.

    see if it's better.

Maybe you are looking for