Impossible to sleep or hibernation

Similar Questions

• Satellite P300-h-13 is not waking up from sleep and hibernation

  My laptop (Windows Vista 32 bit) cannot wake up from its sleep or hibernation.
  Laptop is on the mode of feeding.

  However, once the screen is off (after 10 minutes), I am unable to wake up.
  Cannot open the the Task Manager, Shut Down, nothing works, I see is a black screen, the disc access light flashing and the fan is running.

  I find myself holding down the power button to turn off.
  This is a recent development, it had to start when I installed Office 2010 on the laptop.

  Any suggestions?

  Hello

  Since when did you notice this problem?
  This issue was present after the installation of the system clean?

  What is the BIOS? Is up to date?
  I read in a few discussions setting the BIOS update can help with these similar problems.
  So the update of the BIOS is definitely worth a try.

  Also update the display driver would be recommended. Of course just in case you do not use the latest version.

  By the way: Win 7 isn't an option for you? Windows 7 is a lot better and a lot of different issues that appeared in the Vista system, have been smeared in Win 7

• Hybrid sleep or hibernation

  After using hybrid sleep or hibernation these last months on my laptop Dell 1525 with Vista Home Premium, they don't work any more than. I even sometimes just problems stop.

  Hello vatsugr,

  Thanks for posting on the Microsoft answers Forum.

  Are you still experiencing a problem with hibernation and standby on your Vista computer? Have you followed the steps of troubleshooting on the article?

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Please reply back and let us know how we can help you further.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Vista Ultimate 64 hangs on resume from sleep or hibernation

  I run a new computer with Vista Ultimate 64 since the installation, I tried for a week to stabilize 'sleep' about 60% of the time, the system would crash on Resume from sleep. The motherboard lit up and the two leds of DVD would be cycle but no hard drive activity light and no post or video that I have to do a second switch 4 then reboot to start. sometimes twice.
  So last night, I found an article on how to enable Hibernation with a command prompt, and I did.  Hibernate is now having the same problem. any help?

  Dunka HI cottage

  Try to change your setting of power for "EXAMPLE":

  CA
  45 minutes of sleep
  Hibernate 1 hour
  Disable hard drive EVER
  battery
  20 minutes of sleep
  Hibernation of 25 minutes
  Disable hard drive NEVER

  Setting that allows you to 'Turn Off Hard Disk' to 'Never' windows hibernates to control of power off of the hard drive.

  Please let us know how it works for you. Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Windows 7 auto mde sleep and hibernation does not

  Hello

  I am Windows 7 64 bit Home Premium SP1 - computer laptop ASUS K55A and automatic sleep mode / hibernation does not work.

  Please tell us what to do to fix.

  Thank you

  Lynne

  Thank you for your time and your answers...

  I ran the Microsoft Fix It and now everything seems to work very well. .  sleep/wake extended and even the screen saver is now working.

  I am a very happy customer.

  Difficulty of MS is an excellent solution - and easy to use.

  See you soon
  Lynne Carter

• TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

  I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

  The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

  Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

  Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.

• Sound glitches after the computer wakes from sleep or Hibernation

  When I first turn on my computer, sound works fine, but after standby or hibernation there is odd audio 'glitches' each time there is a spike in CPU activity. The seeds just sounds like small clicks and pop, but I find them very noticeable. They are triggered by things as simple as loading a page in a web browser (which reached only ~ 30% CPU usage on my computer).

  Here's what I discovered by just my own tests:

  * Happens in programs that use DirectSound and WaveOut. (I think almost all programs use DirectSound, right?)

  Programs that use his alternative such as the ASIO API are not affected. I've tested it using foobar2000.

  * When recording my sound output using Audacity, clicks and POPs are included in the record. (I can download it somewhere if you want to hear exactly the kind of glitches that I'm talking about).

  These facts lead me to believe that the program exists somewhere in the code of Windows Audio (ie. not a hardware or driver problem).

  A few things here that I tried to solve the problem:

  To restart the "Windows Audio" service.

  Stop service "Windows Audio", go to sleep, wake up, start the service 'Windows' Audio.

  * Updated my audio drivers

  Using the default windows audio drivers

  The seeds still exist when I try these. The only thing that solves the problem is to restart the computer.

  The most obvious permanent solution to this problem is simply not to use mode 'sleep', but I should be able to use the "sleep" without these problems. I hope just this problem is fixable by me, because after all, I lived in an attempt to solve this problem, I'm afraid that nothing will work.

  OS: Windows 7 Ultimate x 64

  Sound: Realtek ALC662 HD Audio

  Thanks for the reply again, Umesh. Updating drivers did not work, but I managed to solve the problem.

  In my original post, I said sound glitched whenever there was a CPU usage, but today, I realized that it was actually using the network causing glitches. I updated the driver for my network card and now the problem is gone! I don't know what was going on, but at least it works now!

• Satellite don't wake up from sleep or hibernation when the lid is closed

  It is a problem that I had with my laptop from the outset - if the laptop is in sleep or Hibernate mode and the lid is closed, or the lid is closed and will switch "standby" from there, it won't wake up or respond to the switch once again opened.

  Even holding down the power button has no effect, the only way to turn it back on is to remove the battery, put it back and turn the phone back on, lose anything I had opened.

  I fear that the laptop could be damaged by this, but there is no other way.
  This isn't a problem with the settings of windows, I had the same problem with the function suspends in ubuntu.

  Anyone had similar problems or know anything than either could have caused this?

  What model of Satellite L do you have exactly?
  What system is pre-installed? Have you tested this problem with laptop recovery fees?

  BIOS is up to date? If it is not updated in the BIOS.
  After update BIOS, set the default BIOS and test the features of the laptop.

  Your comments would be appreciated

• Lose Internet connection after sleep/standby/hibernation Mode

  I recently bought a new HP Pavilion Elite e9105z CTO Office and migrated from Win XP to Vista Home Premium x 64, with a NVIDIA nForce 10/100 Mbps Ethernet Controller.  Whenever I come off standby or standby mode, I lose my Internet connection and have to restart my system or run Windows Network Diagnostics to repair the network adapter settings.

  I tried several remedies available on Internet; but unfortunately, nothing has resulted in a permanent solution.  I contacted my service provider ISP (Mediacom) wonder if it was / is a problem with the firmware used to my cable modem SBV5220 support (for example, incompatibility with Vista) and they said there is no.  So far, I have:

  1. Reinstalled NIC driver.
  2. Power options controlled and reset with USB CDC.
  3. Apply the update for Windows Vista (default gateway setting is lost) for x 64 systems (KB933872) - response that update does not apply to the system.
  4. Reset the IP configuration via the Cmd line.
  5. Tab power, unchecked the box that shuts down the adapter then power save comes into play.

  Access the computer several times a day and having to reset Internet connections became extremely aggravating.  I hope there is a solution.  Thanks in advance for your help.

  Back from a 3 week stay, during which my office has been extinguished, my local internet connection would come is no longer active when he came out of hibernation.  The without line worked, but the local connection would not work unless physically, I unplugged the cable from the router (Netgear) and reinserted it.

  After several days of frustration, I went into the Manager of devices, unchecked ethernet optional adapter "allow the computer to turn off this device."
  This seems to have cleared up the problem, at least until now...

• Windows 7 does not sleep or hibernation.

  I have an Asus K8NE Deluxe Motherboard and Windows 7 64-bit don't sleep or standby extended.

  He will enter the power off process, but once it stops instantly begins the recovery process
  Windows without my touching the keyboard.
  
  I never had this problem with Windows XP 64-bit.

  Hi, this may be because of the lan wakeon functionality, please turn off and check

  To turn on or turn off power management features

  1. Open Network Center and sharing (click the Start button, type network and sharing in the search box and press enter).

  2. Click on the Edit card settings link in the upper left corner of the navigation pane.

  3. Right click on the network connection that you want to turn on, then power management support click on Properties.

  4. Click set up.

  5. On the power management tab, select or clear the checkbox allow the computer to turn off this device to save power .

     • When enabled, power management is enabled on the network adapter.
     • When authorized, power management is disabled on the network adapter.

  6. You can enable Wake on LAN for all methods of wake or just enable magic packet WoL:

     • To enable Wake on LAN for all methods, check the allow this device to wake the computer check box.
     • To enable Wake on LAN for a magic packet only, check the box to check allow this device to wake the computer , and then check the box allow only a magic packet wake the computer .

     Note
     For devices that does not support unloads ARP and NS, default Windows to wake that the magic packet.

  7. Click OK.

  Barro

• Unable to access windows desktop 8 - sleep or hibernation settings

  Hello

  I use the software of windows 8 for the past two weeks. Anywhere, anytime, to stop the PC, I am unable to get back in with ctrl + alt + delete to get to the sign in the stadium.

  This time the keys ctrl + alt + del functionality does not work and I am unable to get everything.

  I think it has something to do with the sleep settings and ensures extended, but unfortunately, I can't solve.

  Help, please

  Thank you

  Hill

  Hello Hill,.

  You can try to start safe mode and see if the problem occurs. To initiate safe mode follow the link below:

  Start the computer in safe mode

  If the problem happens then in safe mode, try to perform the boot so that we make sure that there are no other third party application which is in conflict with the operating system. To perform a clean boot, follow these in the link below:

  How to perform the clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Additional information:

  Resolution of errors blue screen in Windows

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Important: When running Chkdsk on the drive hard if bad sectors are found on the disk hard when Chkdsk attempts to repair this area so all available data on this risk be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Update caused HP DV6 to lose sleep and hibernation of the functions

  My almost new DV6 comes from losing the ability to sleep or Hibernate.

  This occurred only after an update online systematic HP and I cured the problem by restoring my system to the last restore point before the update from HP.

  The symptoms of the error was that the computer will turn off if left unattended, would otherwise freeze when the cover is closed, who need support for 5 seconds the start button to thaw it (i.e. turn off!)

  I know that this problem was caused by an update of HP as settled the problem of restoring the system.

  How can I make sure that HP do not for me even once?

  Is there a way I can report to HP?

  I suspect that you have installed HP Support Assistant. To avoid this situation, you can uninstall this software or change the deafult settings. How do you change them?

  Use HP Support Assistant and choose " settings ".

  

  Change ' check and install all updates (recommended) automatiquement.*. '

  

  to ' do not check updates. ' or " Check but let me decide who once to install.* " and confirm your choice by clicking " OK ".

  

• Windows 8 crashes whenever I have stop, sleep, or hibernation

  Here is the mini dump files, thank you!

  http://sdrv.Ms/QRyNOH

  The minidump files showed a SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) coherent stop error caused by the CAX_CNXT.sys:

  BUCKET_ID: AV_CAX_CNXT+ c307e

  The CAX_CNXT.sys, which is dated October 18, 2006, is a driver for the Conexant modem and should be updated to a newer version.

  Try the driver Conexant of Windows 7 (version 7.80.4.55) in the following link:

  http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=2388

• T61p with XP SP3 - SVCHOST flaws during the return of in sleep or hibernation mode network drivers fail.

  T61p product ID 64578LU

  Before you install SP3, the functions of standby and Hibernate worked fine.

  Now, I get an SVCHOST error message and network interfaces fail, forcing me to reboot.

  I have improved the NETWORK card and readers at the latest Intel wireless.

  I deleted the ThinkPAD power management tools.

  I have noticed on other forums that others with Lenovo T series laptops or other manufacturing with the Intel centrinos have similar problems.

  Someone has an idea, what is the question.

  The fix is quite simple.

  Instructions can be found at the bottom of this blog from Google:

  http://groups.Google.com/group/Microsoft.public.dotnet.General/browse_thread/thread/9cc273eb9019f1e2...

  I followed not them exactly... I stopped and disabled the WZC service, backed up the files copied to them, then "stop" and restarted.  The activated and started the auto configuration service and rebooted once more.

  Everything seems fine!

• Lock, sleep, put into hibernation? Definitions, please

  I have waded through the help texts but is more confusion than assistance!  What exactly each of these terms, and what is the difference between them?

  The scheduled tasks 'wake up' the computer if it is locked, asleep or hibernating?  If so, the computer takes over the State after the intended function?  No doubt the programs that were running when the computer is locked, put in sleep or hibernation are suspended while in one of those States - or are they?  And when or why a State should be used rather than the other?

  Hello

  Not really as equivalent to read all the Shakespeare for the technology is "Google is your friend". Which
  of course still applies.

  When a computer wakes it reruns not the startup folder - it only runs scheduled tasks, then
  fall back to sleep.

  While you sleep, it will work only the tasks that have been set to Awake the computer. Scheduled tasks
  but they are not set to wake the computer not to run.

  Normally the computer goes to sleep after that a scheduled task is completed.

  Google is your friend :)

  Rob - bicycle - Mark Twain said it is good.