Impossible to the configuration file of the access to the error in XP mode: "is client\users\administrator is not accessible.
Original title: can not access the configuration file because I'm not the administrator, even if I'm the only person who uses this computer
I bought Windows 7 Professional on a new computer, because a program that I use every day may run in XP mode. Configure XP mode and when it asked for a password that I left it empty and press to enter. When I try to enter in the file config on XP the message "is client\users\administrator is not accessible." You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission.
I downloaded the andxp of MS virtual pc mode because this 8 year and plu program will be run in this mode. I copied the old computer config file and you want to replace the file loaded when I installed the program on the new computer. Who will save me load all data files (more than 80) and not to recreate the data in these files that I changed. I installed the program from the original disc and it is implemented very well except for the config file.
There are two user fence: virtual XP-admin and virtual user of XP-88950xp.
The only program I installed XP mode is this one.
Thank you.
Hugh Humphreys
Hi Hugh Humphreys,
Leave the password empty section and see if the XPMUSER can be accessed.
Method 1: If the problem persists, you can try to access Windows XP Mode with the default account named "Administrator". This account appears when we get into Safe Mode. By default, there is no password for this account, and the password is determined when you set up the Windows XP Mode. We can use this account to reset the password of the other accounts password. To do this, follow these steps:
(a) Firstly, disable the integration features.
(b) restart Windows XP Mode. When the Boot Menu appears on startup, press F8. (Continue to press the F8 key until the Windows Startup menu is displayed.)
(c) on the advanced Windows Menu of Options, select Safe Mode and press ENTER.
(d) log in Windows by using the administrator account and the password.
Note: The password is empty by default unless you already set a password.
(e) after the connection mode safe, click on "Start", go to "run", type "nusrmgr.cpl" (without the quotes) and press ENTER.
(f) choose the user you want to change and click 'reset password'. Set a new password.
(g) click on "Advanced" tab, click on the button "Advanced".
(h) click on "users". The choice of the user you want to edit in the right pane. It to the right and click on "Properties".
(i) check the "password never expires". Click on 'OK'.
(j) then exit the settings and restart Windows XP Mode to normal mode.
Method 2: Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:
(a) when he asks for a password, click Cancel. Without integration feature, you are allowed to log on with an account that does not have a password.
(b) set a password for your current user.
(c) click on tools on Windows Virtual PC, choose enable integration features.
i. type the password, check the box "Remember my credentials" and click OK to open a session.
II. after joining the domain, logon in XP mode with the local administrator account.
If this does not work, post your request in the TechNet forums to get help.
http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads
Tags: Windows
Similar Questions
-
Receive the error code 0 x 643 trying to update. Not sure why they don't is not loading? Tried to look at the code but nothing helped. Any suggestions?
You can watch the following article to see if this will help with the error 80070643.
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643>
UTC/GMT is 15:50 on Sunday, August 19, 2012
-
I updated from XP Pro to Win7 Ultimate.
When I try to install Highway 2010 (that I had before) I get the following message
"Your registry settings for this application were not copied correctly. To correct these settings, run the installation of this application from the location where you originally installed it. »
I tried the suggestions without success. So what do I do to fix this?
I have found since that when I uninstall several files are missing, 41ce1.rbf & 41d81.rbf are later. It seems that highway will not properly work without their files (I guess here).
So where they are or how can I get the.
I get the same problems when I try to install Highway 2011 test, I don't buy the full program so the custom of trial run.
Chris TownsendNow, I know the .rbf files are files of Roll-back.
Hello Lrchr,
Your question would be better addressed in the highway, streets and trips and MapPoint.
Click here for a link to repost in the forum of the highway. They will be better able to solve your problem here.I hope this helps.
Marilyn
-
Analysis of the error in normal mode string
Hi all
Suddenly, my analysis of the chain has stopped working and started giving me this error. The read string ends up being something like 2.86E - 4 or similar. When I run mode highlighted everything works fine and it interprets the number very well but when he's not in highlight mode it returns an error. Not sure why since it is just a number to convert. Any help? I have attached the error and the highlight mode version. Thank you!
First guess: synchronization problem. Especially since you said it works in highlight mode. Specifically, when you run culminating point mode you expect probably not long enough before trying to read, and the loop will immediately detect any byte on serial port. This delay function there will not guarantee a delay of 1 second between writing and reading. There is no dependence on the data - a rookie mistake. Use an image sequence or time to late VI to have clusters of error wiring through establishing the data dependence.
-
Can not fix with fixit.
http://Windows.Microsoft.com/en-AU/Windows-Vista/Windows-Update-error-80070490
If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need repair Windows. Repair Windows will not damage your personal files or the programs that are installed on your computer.
The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error. You can access and run this tool by reading this Knowledge Base article on the Microsoft Web site.
If the system update readiness tool solves the problem, you will need repair Windows.
Of course a repair installation will not solve the problem if it is due to an infection of virus/malware etc.
-
Impossible to import PowerPoint file in Windows Movie Maker - codec error
I am tryping to import a PowerPoint file into Windows Movie Maker to burn it to a DVD, but I get a codec error
Cannot import the file C:\Users\Karen\Documents\2009 Fundraiser\Yellow Rose 2009.ppt MWP because the necessary codec to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.
How can I find this codec and install it?
Blond highlights Hello,
Thanks for posting in the Microsoft answers Forum. Usually, when you try to play a video in Media Player if you do not have the right codec Media Player will automatically download and install the correct codec if it is available. Since this is a Power Point presentation has video embedded in it? If so, try to play the video file outside the Power Point presentation and Media Player will go out and get the correct codec if you are connected to the internet. Here is an article from the Microsoft Knowledge base that explains Media player codecs and configuration to automatically download:
http://support.Microsoft.com/kb/926373
I hope this information is useful.
Thank you
Jack
Jack
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello, I hope you will be able to help me.
I have an old backup computer with all my stuff backup well on it and I went on it today and I couldn't remember the password. It's a Packard Bell computer and I have windows Xp home edition. I am the administrator and the only user of this computer. My login is not your typical connection, it isn't fancy with photos etc. is the old login box with only the user name and the password. I tried safe mode and I can't get into safe mode, but when I select windows safe mode starts up normally and the connection will appear. No matter what I have I can't get in. I don't have a CD to reset restart and helps administrator as the username without password does not work because it pops up saying "unable to connect due to account restrictions. Please help me.
Hi Melanie,
Please see this thread that provides a solution of MVP Malkeleah
Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.
Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I went to the services but I have no shoes click on I tried what was in the help section, but it did not help I am new to the computer and was completely lost what to do you if someone can help please help system is Vista, I get the answer as I am not short , but I'm on the internet. Thank you
Hello
Thank you to contact the community Microsoft and we will be happy to help you with your concern.
According to the description, it looks that you are facing a problem during the installation of Windows update.
This problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and find the number.
It would be great if you could answer these questions.
1. have you made changes on the computer before this problem?
2. What are the troubleshooting steps you have tried?
I would suggest trying the following methods and check if it helps.
Method 1:
I suggest you perform a SFC Scan and check if it helps.
The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 7: http://support.microsoft.com/kb/929833
Method 2:
Open the Windows Update troubleshooting tool: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
Method 3:
Reset Windows update components, and then check if it helps.
How to reset the Windows Update components? http://support.Microsoft.com/kb/971058
Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
Method 4:
If you are still having the problem then I suggest you run the system update tool and check if it helps.
Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/947821
We would be more than happy to help you if the steps above did not solve the problem.
-
I tried some of the ideas in the forums and Vista still won't let me load the drivers. It recognizes the printer and I'll install the drivers, no luck getting error 0x000003eb. At IT, share the printer UAC is on, tried with offshore, does the same thing.
Try to install Xerox Phaser 6250DP Laser Color. If anyone has an answer, you wish.
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
http://TechNet.Microsoft.com/en-us/library/bb727037.aspx
Have a read of the link above re Vista file and printer sharing.
Permissions/Share info is there as well.
See you soon.
Mick Murphy - Microsoft partner
-
I'm trying to run a vbs file using a batch file windows scheduled in the Task Scheduler in windows 7. The vbs runs under the Scheduler if the option "run only when the user connects" is checked.
When I go to 'Execute if user or not' task does not, either manually (by command file) or through the schedule.
The vbs is a project of SAS Enterprise Guide. These scripts, vbscripts worked in Windows XP.
This is the vbscript code (I don't know anything about vbs, this is generated from SAS for EXAMPLE):
Option Explicit
Dim appCall to dowork
"Stop the app
Otherwise (app IsNot Nothing) then
App. Quit smoking
Set app = Nothing
End IfSub dowork()
On Error Resume Next
'----
"Start Enterprise Guide by using the name of the project
'----
Dim prjName
Dim prjObjectprjName = "------network patht\SQL_tst.egp" ' name of the project
Set app = CreateObject ("SASEGObjectModel.Application.4.3")
If Checkerror ("CreateObject") = True Then
Exit Sub
End If
'-----
"Open project".
'-----
Set prjObject = app. Open(prjName,"")
If Checkerror ("app. Open") = True Then
Exit Sub
End If
'-----
' run the project
'-----
prjObject.run
If Checkerror ("Project.run") = True Then
Exit Sub
End If
'-----
' Save the new project
'-----
prjObject.Save
If Checkerror ("Project.Save") = True Then
Exit Sub
End If
'-----
"Close the project
'-----
prjObject.Close
If Checkerror ("Project.Close") = True Then
Exit Sub
End If
End SubFunction (fnName) Checkerror
CheckError = False
Dim strmsg
Dim errNum
If Err.Number <> 0 Then
strMsg = "error #" & Hex (Err.Number) & + "\n" & "as" & fnName & + "\n" & Err.Description
'MsgBox strmsg' Uncomment this line if you want to be notified via MessageBox to errors in the script.
CheckError = True
End If
End FunctionHello Carolyn111,
I suggest that you post in TechNet in the official Scripting Guys Forum.
Click on the link here to post your question. They would be better able to answer your question.Thank you
Marilyn
-
Unable to connect to the PC, get the error "failure of Group Policy client service."
Original title: political customer service doesn't have a group
Hello
My name is Jonathan and I am using window 8 on my laptop. I have a user account, it is the administrator then when I enter my password to connect a pop-up message indicating
"The Group Policy Client service could not sign-in.
can someone help me please I have important files in it and I really need them and use my laptop
Hi Patricia,
Sorry for the late reply.
Please follow the steps below and the automatic repair on your computer.
Auto repair:
(a) when your computer starts, wait for the logo of the manufacturer check the option of start menu, it will usually F12.
(b) the start menu key can be different with each manufacturer. If you are unable to find the start menu button, you can consult the user manual.
(c) to restart the computer, when the manufacturer's logo is displayed, press Start menu option to enter the boot menu and change the DVD ROMboot option.
(d) once you start your computer by using Windows 8 DVD, a black screen appears with the gray text "Press any key to boot from CD or DVD". Press a button on any.
(e) select the exact time and the type of keyboard.
(f) click on repair your computer in the lower left corner
(g) click on Troubleshooting, advanced option and then click on auto repair.
I hope this helps. Please get back to us if you need additional assistance.
-
Each web page and the top of the sidebar bookmark when open is unresponsive to the mouse. Everything that top wind browser seems to work very well, and while below the top 1 1/2 inches at the top of page seems fine. I've uninstalled and reinstalled Firefox 7.0.1 without change. The first 7.0.1 update does not appear to be any problems, and I don't know exactly when it has changed.
The extension of the Yahoo! toolbar reported that causes this problem. Disable or uninstall this add-on.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
-
Hello! I had a big problem I got a message saying thay one can access my removable disk or my CD .i don't know why? /
I turned off "use simple file sharing". No change.I chose to restore my system, and I can't do it.When I try to log on in safe mode fine.I have used many CDs.in a second computer, I can access them.Hi yassinksouri,
As the problem does not persist when performing the clean boot procedure, which means that some third-party programs installed on the computer are causing the problem and you will need to find by the complete clean boot procedure.
Now you need to find out which third-party program or service is causing the problem.
Repeat till step 2 of the http://support.microsoft.com/kb/310353 and then continue with the steps below.
Step 3: Enable half the services.
(a) start the System Configuration utility.
(b) click on the Services tab, and then click to select the hide all Microsoft services check box.
(c) click to select half of the check boxes in the Service list.
(d) click OK, and then click restart.
Step 4: Determine whether the problem returns
If the problem persists, repeat steps 1 and 2. In step 3, click to clear half of the check boxes that you have initially enabled in the Service list.
If the problem does not occur, repeat steps 1 and 2. In step 3, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.
You must repeat these steps until you find which program or service is causing the problem.
See the Microsoft article as well as reference since it applies to Windows vista and Windows 7.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
-
Running Windows XP Professional Service Pack 2. Was running Windows XP Professional Service Pack 3 when a problem came. With a built in system recovery my compaq 8510w, I save all the OLD data and run the system recovery.
Today in my backup of my documents and settings administrator watch above message folder. All other folders are accessible but not the folder of the administrator.While Moving mouse over it says folder is empty. Accessories/System Tools/backup, I can see all the OLD files and records are available, but they are all access is denied.Help, pleaseSee if this article helps you (note the instructions for XP Home and XP Pro are somewhat different):
-
Configuration file for the VPN concentrator
Hello
I have a text-based VPN concentrator configuration file, and I want to know if there is a configuration guide of Concentrator VPN that I can use to refer to this file. The configuration on cisco.com guide is currently for the GUI based configuration.
Furthermore, if there is a tool/utility that will read the configuration file in the format GUI without physical access to the device, which will also help.
Thanks in advance for any assistance.
There is a "XML export screen" in the management section of the files on the VPN concentrator. You can export the current configuration of the concentrator in a XML format, which provides the labels and values for the fields in the configuration file.
Maybe you are looking for
-
How can I add more shapes to my shapes menu pages?
How can I add more shapes to my shapes menu pages?
-
does anyone use GIMP on ElCapitan?
I use a software called Gimp to make video games. He has worked on yosemite, but I can't make it work since I upgraded to El Capitan. I think I downloaded the latest version, to 2.8.16, but she did not specifically mention El Capitan. Someone at - i
-
Windows Media Player does not work on Equium A100-027
I have a portable satellite A100-027, I bought in February of this year. I just tried to play my Windows Media Player, but nothing happens when I click on it! It was working fine yesterday, but today it no longer works! Can someone help me please?
-
subVIs does not function when it is called by main secondary to vi
Hi all I have a main.vi that loads the façade into a secondary four subVIs when selected. Like most applications, everything works fine up to come to build the project (.exe). Program works as expected when run it from .exe but when all the vi.lib fu
-
I can barely read my monitor. I tried to adjust the color and resolution but does not
original title: monitor settings I can barely read my monitor. I tried to adjust the color and resolution, but nothing helped.