Impossible to transfer the photos from my camera

Similar Questions

• Computer crashes when I try to open a printer, scanner, or transfer of photos from a camera

  Whether on the internet or not, every time I try to open a printer, scanner or transfer of photos from a camera over the past two weeks my computer crashes just in the middle of something. Any tips? To turn off the computer I have to do it manually (by switch - the height of the work)

  From Internet Explorer

  Original title: frozen computer

  Hello

  Virus may be one of the reasons of performance. Running a scan using Microsoft Safety Scanner of network in safe mode can help to know if it has viruses.

  Follow the steps in the http://support.microsoft.com/kb/2681286

  Safety Scanner WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  To start the computer in safe mode with network, please go through the steps in http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

  In addition, through http://windows.microsoft.com/en-in/windows7/optimize-windows-7-for-better-performance to optimize the performance of Windows 7.

  Hope this information helps. If you have any questions, please let us know.

• Removal of the Photos from my camera

  Recently, I synced my phone with my computer not knowing that the synchronization of all of the photos from my PC to my device has been verified.  Now, I don't know how to remove out of my phone.  It made its own folder in my phone and does not give me the option to remove one of them... So frustrated.  Help, please.

  Just make a new synchronization with nothing selected, that is to say, deselect all photos. Who should make them disappear from the phone, but make sure that the synchronization of all now is not selected.

• I say AutoPlay to change the folder where the photos from my camera?

  I just install a second hard drive and want to only for the pictures from my camera to write on the new drive, instead of C:\Users\Public via the Public link.  Can I do this?

  Hello

  You should be able to manually select the location where you want to save the files when you connect the device to the system.

  See the article mentioned below to the evolution of the auto run settings

  Change AutoPlay settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• All of a sudden, I can't import all of the photos from my camera. I can see them in the preview, but when I click on import null then imports in the catalog. I've tried several different cards, nothing will matter.

  Out of no where I can not import all the photos in my camera. Loading images and I can see them in a preview. Then when I click on import, it starts and nothing is imported. I tried several maps and images that nothing will matter. Help, please!

  I'm on my way to get a card reader now give that a try. How to use my operating system to copy the files. I see that I can import and add to my existing files on my Mac - photos.

  Once again, appreciate the help. Im going nuts!

• VCM*.jpg files created when the transfer of photos from my camera

  Why a vcm*.jpg is created for all the photos I've uploaded from my camera? I see a folders of JPG low resolution a lot starting with vcm...

  Please help, I don't like my cluttered files

  Hello

  ·         If it works well before?

  ·         What is the number and the model of the camera?

  ·         Did you change the import Windows settings?

  ·         Have you made changes in the camera?

  I suggest you follow the steps below:

  Method 1:

  Connect the camera to the other computer and check if the problem persists.

  Method 2:

  If the previous step fails, follow the steps in the link to get pictures from the camera to the computer:

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

• I have installed the photo gallery. When I try and transfer the pictures from my camera using HP transfer card, installation of photo gallery keeps popping up. How can I stop this?

  Photo Gallery

  Hello Stormisbest,

  Thank you for your message.  After researching this issue, it seems that you get an error related to HP at the start.  Most users seem to have corrected it using the HP disc that came with their computer when they are invited at the entrance of the original disc.
  Have you thought about upgrading to Windows Live Photo Gallery?  Click HERE to download.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• can not open the photos from my camera digital canon to laptap-don't say no photos or videos on the camera or card

  When connect you camera to computer laptop-photo on the screen of the device are lost and on laptop says no photos or video were found on this device

  Hello

  What is you get the exact error message?

  Please follow the steps from the link and check that it works very well.

  Download pictures from your digital camera

  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/download-pictures-from-digital-camera

• Impossible to rotate the photos from an sd card

  Rotation of photos

  I'm not able to get the rotate option works by trying to rotate my photos from sd card. A message appears and says that he does not.

  Try to place the photos on the hard drive of your computer (computer desktop for example) first, and then turn them.

• Can I transfer my photos from my camera photos and how

  I want to put my favorite photo that are on in my images on or in my camera so they can be transferred to the image of Sony.

  I want to put my favorite photo that are on in my images on or in my camera so they can be transferred to the image of Sony.

  You will need to have a usb cable that is able to connect to your camera or your camera must have a memory card. Be advised that if you use the method of memory card, that your computer must have a memory card reader or you could buy a usb memory card reader. They are reasonably cheap.

• How to move photos from a camera to an external hard drive?

  I did it before connecting each of them in my iMac, but I don't remember the correct sequence and the steps necessary to transfer the photos from my camera to my external hard drive. Thanks for your suggestions.

  The simplest method is to take the SD card out of the camera and then insert it into the SD slot on the side of your 2011 27 "iMac and copy and paste the pictures from the SD card to your DHM.

• Aspect wide photo after you transfer the images from the camera

  Original title - aspect wide photo after download

  After you transfer the pictures from my camera to my PC, subjects are not as the original photo taken.  People who are really thin show also stubby. I used another PC and downloaded normally photos.  I used the photo of different programs, from Kodak, Roxio, windows Photo Gallery. I put my card directly into the PC with the same results. I tried to change my video setting and updated my NVIDIA card driver. Change the size of the photo doesn't do any good change just the measure of perimeter. I know that I can edit the photos, so people watching more thin but can you imagine doing that in every pic I take. I hope someone can help

  I finelly solved the problem by playing with the resolution until I found the appropriate settings. How to change the setting, I don't know, but as long as it works I can live with that.

  Bob

• My scanner and Camera Wizard is not poping up to transfer photos from my camera

  My Wizard appears after using the trial version of AVG PC Tuner is no longer to transfer pictures at my cameras are listening on.  Used to.

  the wizard has no other camera listed... does not work try to list them using the disc that came with them... I have a Sony and a new Panasonic... dunno why no brand is not listed.

  Anyone know how to get the screen to make it appear again?

  I tried the automatic setting of Microsoft... has not helped... Impossible to find something wrong

  I have always used the auto pop up the camera wizard to transfer my photos from my camera.  I ran AVG PC Tuner trial a few days ago.  Now... the scanner and Camera Wizard does appear more... ugh.  I tried to add the two cameras to the wizard, but because Sony and Panasonic is not listed, I can add them (he claims he can't find good info on the disk is)

  Anyone know a fix?

  do a system restore to an earlier date of AVG from the trial.

• Import and delete the photos from the camera

  The link you gave is not useful. I don't want to use the application Windows 8 photos. All I want to do is to plug my camera and have pictures, transfer in a folder of my title and delete the photo from my camera. It's an ability that were available in Windows 7 and not available in Windows 8. I am currently using Dropbox and it is slow and uses tons of data to my hotspot.

  Thank you!

  Split from: https://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/importing-and-erasing-photos-from-camera/d8ad55da-66e7-46d5-b54e-3ef0bf45e986

  Hello Joe,

  Thanks for posting your query in Microsoft Community.

  I understand that you have questions, import and delete the photos from the camera. We are happy to help you in the matter of fixing.

  You can check the below link to import photos from the camera.

  1. First, connect your digital camera, and press the Power On button. Windows 8, which will detect the camera and will install the appropriate drivers.
  2. After the driver installation is complete, the AutoPlay menu appears.
  3. Select the option import pictures using Windows.
  4. In the lower right corner of the screen, a small window asking if you want to mark photos will appear. You can type a general images you want to import. Tags can be very useful to organize and find your photos.
  5. If you do not want to insert a tag just leave this space empty and click Import.
  6. If you want to customize the import settings, click the Options button. Now you can change the following settings: where pictures import them (the default folder is pictures - if you want another folder, click Browse and select or create this folder), the name of the folder (by default the name of the folder will be the date when the images are imported over the tag you entered) and the file naming convention.
  7. When you are finished, click the OK button. These settings apply to all the photos you want to import in the future.
  8. After you click import, Windows 8 starts to move all your photos.  If you want the pictures to be removed from your camera once the import process is completed, click the Delete after import check box.
  9. Once the process is complete, start Windows Photo Gallery and you will be able to see all the photos that have been imported.
  10. Now, turn your unit off and unplug the cable to connect to your PC.

  If this does not help then, try the steps below to get the images from the camera.

  1. Go in computer.
  2. You will find the camera under portable device or removable devices.
  3. Double-click on this unit and you can copy and paste from this location and import it onto your computer.

  I hope this helps. Otherwise, feel free to write us back for assistance.

• I imported the pic from my camera to my images. When I go into my photos and do turn and then try saving the picture, it says "you cannot rotate this image.

  original title: read only the settings on my photos

  I imported the photos from my camera to my computer and saved in a folder in my pictures.  When I go into my photos and do turn and then try saving the picture, it says "you cannot rotate this image.  The file may be used or open in another program or file or folder can be set to read only. "I have tried many and repeatedly edit the files and folders to uncheck Read-only, but it keeps changing its property back to read-only.  I also know that the file is not open or in use anywhere on my computer.  There must be something wrong with the parameters of only reading, but I have no idea how to do to figure it out, I tried several times to change.

  Any help would be great!

  Thank you!!

  Okay, it looks like that your camera records the files in write protected files.
  1. There should be settings on your cam to stop recording pictures like "non-indexed.
  2. but right now, try this:

  Right click on image > click Properties > click on advanced > check / uncheck the ' Index
  This file / folder...' option (should be the second option)
  Click OK > click on apply.
  and you'll see it disappear / appear

  You can do this for all the photos (hold down the ctrl key while selecting to choose several files at once)
  Eddie B.