Impossible to turn on the Windows Firewall, get 0x8007042c error code

Similar Questions

• Impossible to display the Windows Firewall GET an error due to an unidentified problem, Windows cannot display Windows Firewall settings

  OP: Problem with Windows XP service pack 3__ firewall settings

  When I try to view the settings of the firewall, a dialog box appears saying "Due to a problem not identified, Windows cannot display Windows Firewall settings".

  I read a thread on a file to merge with the registry of XP SP2. I did not like I do not know if it would work with SP3? or should I do something else?

  In addition, why is that happening? What is the problem with the Windows Firewall? If this has happened for some time is a Microsoft patch that can be downloaded instead of trying to make mergers of registry (I'm not very happy to do).

  Thank you

  "See if it's the same window that you see - Windows cannot display Windows Firewall settings" error when you access the firewall settings in Windows XP
  If this is the case, then follow the steps put in place for Solution for case 1: MowGreen Expert from Windows IT Pro - consumer safety

• When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  I found another thread in Microsoft Answers relating to this problem, but who said to go into Services and see if the firewall is configured to automatically start.  However, I can't find a Windows Firewall item in the Services Menu.

  I have the PC Tools Spyware Doctor antivirus.

  I had to do a complete recovery system... which sets just need to make sure that you back up your files.

• I get an error of 0x8007042c code when I try to turn on the Windows Firewall.

  Original title: firewall of windows 7 is not not useful

  can not turn on the windows firewall 7 on Dungeon receives an error of 0x8007042c

  I tried many other suggestions, without success. Help would be very appreciated

  See the Microsoft Knowledge Base article to resolve the error of 0x8007042c - http://support.microsoft.com/kb/2530126

  Jim

• When turned on the computer he get an error message ' missing < root windows > \system32\ntoskrnl.exe.

  Hi, I replaced the motherboard in my computer, it seems to work very well, but when you turn on the computer I get an error message:

  \SYSTEM32\NTOSKRNL.exe is missing or damaged

  At this stage there is no cursor, or what I can do to get in my area on my drive, it's as if the computer shuts down and this message does not disappear.

  I am running Windows XP operating system.

  Is there a solution for this?

  Thank you

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  Follow the steps in the link below and check if this can help: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477

• Tried most methods still Cant turn on the windows firewall and windows defender

  k... I tried a few methods now to go into services and in the confirmation of order... Security Windows won't let me turn on the firewall or Defender on vista Basic... hit me with a message saying due to a firewall problem undefined caanot screen settings... This seems very serious please help

  Original title: tried most methods still Cant turn on the windows firewall and windows defender... sounds SERIOUS! Help

  An Antivirus is a fundamental need for security to prevent malware being installed.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  For an Antivirus, install one of these free AVs (installation more than it will cause problems).

  And first of all remove any AVs expired may still have installed:

  Microsoft Security Essentials:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Avast Antivirus:

  http://www.avast.com/free-antivirus-download#TAB4

  See you soon.

• Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.

  Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings.  I tried to reset the firewall from the prompt with instructions, I found online but ask me who fails.  When restarting I also get "error during loading of a file in the Temp,"algmd.dll"folder.  I have Windows XP with SP3.  This problem started after I installed antivirus software, ran scan, found 5 Trojan horses, and deleted files.  Help, please.

  Thank you

  You're still infected:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  Answer the following questions on your next post: brand and model of the pc, what is your antivirus?

  Run all the analyses above, complete, such restart required.

• Cannot receive or send mail using the Windows Mail get 0x800CCC18 error number

  How can I fix the problem?
  Cannot receive or send mail using the Windows Mail get 0x800CCC18 error number
  Windows mail was working fine until about 2: 30 EST 2011-12-14 and tried to send an email and got the above error msg.

  Check with your mail service provider to make sure that there is not an intermittent interruption of service.  If you have webmail capabilities, you can also check.  Otherwise, compact and repair the database (www.oehelp.com/WMUtil/) and if that doesn't help, remove your e-mail account, close and reopen WinMail and then add it back back.  Also check 3rd party program interference such as antivirus software (see www.oehelp.com/OETips.aspx#3).

  Steve

• When the updates of windows I get and error code for 643. How can I fix it?

  When the updates of windows I get and error code for 643. How can I fix it?

  When the updates of windows I get and error code for 643. How can I fix it?

  Here is an answer which is marked as an answer to the error code 643.

  I also participated in that thread, and I gave my suggestions.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6

• When I try to download the update of windows I get an error code every time: 802440F.

  When I try to download the update of windows I get an error code every time: 802440F. Can you please help me solve this problem?

  @ Evanston only!...

  You see the effects of a hijackware infection! If you had used the computer longer, I might recommend trying to detect & remove infections. But it would probably take a week or two and I'm sure you have better to do with your time right now so I would recommend the following (which shouldn't take any more than two hours of uninterrupted time).

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool again Norton before installing updates AND BEFORE installing your new application antivirus (for example, Avast5 or Microsoft Security Essentials, free).

  Tip: Do not install Spybot again; It's really overkill in Win7 my humble OPINION, especially if you are installing Microsoft Security Essentials.

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you.  Good luck & achieve before Thanksgiving 2010!

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• I get an error 0x6D9 code when I try to turn on the Windows Firewall.

  Original title: snap-in failed to load with error 0x6D9 to windows firewall code 7

  Hello. I have a problem 2 days now.i trying to open my firewall windows 7 but nothing happen is .i then tries to open the Advanced Security windows firewall but I get an error that the ' snap-in could not load with error code 0x6D9 .i'm looking for a solution for hours, I try has several tips but I get no results. I also did a full scan with security essentials, super antispyware, malware bytes, Eset on scanner online, TDSS rootkit removing tool but the computer seems to be clean. Can someone help me? Thank you

  Hi Peter,.

  Please contact the Microsoft Community.

  I'd check the "answers" of the wire-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/i-get-an-error-code-0x6d9-when-i-turn-on-the/3f7f6e10-10c9-44C9-9EF7-9a041d5aa705?msgId=57b364f2-1521-4CB4-9835-219fa6530f60

  Back to us for any issues related to Windows in the future.

• Try to turn on the Windows Firewall for vista home basic, the code of error 0x6D9

  I need help to turn on my windows vista basic home firewall but get error 0x6D9 code. This makes me crazy... I pay your bills online and can't do anything until my firewall is on

  Hi William,.
  Follow these instructions to fix the Windows Firewall:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• Under XP, cannot turn off the Windows Firewall settings tab is not available

  My operating system is windows xp (sp3). The firewall is turned on. I want to disable my firewall. But, in my windows firewall set or disable tabs is inactive. Why is this idle setting? What can I do to turn it off?

  Hello

  · Will there be any changes made on the computer before the show?

  You can run the fix it from the link below and check if this can help: diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us?entrypoint=lightbox

  Also access the link: you cannot enable or disable the Windows Firewall on a Windows XP Service Pack 2 computer setting: http://support.microsoft.com/kb/914230

  Note: A Firewall is software or hardware that checks information coming from the Internet or a network. Firewall blocks some information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

• Guests of security software to activate the Windows Firewall, gets the error while trying to enable the firewall: cannot display the settings because the associated service is not running

  Original title: activate Windows Firewall

  My security software keeps sending me a message that it detects my Windows Firewall is disabled. I want to enable it, but don't know how. My OS is XP Home. How to activate the firewall?

  Security Warning: the Windows Firewall is disabled

  http://support.Microsoft.com/kb/2288085>

  UTC/GMT is 19:12 Thursday, October 4, 2012