Impossible to uninstall Logitech Webcam Software

I have Windows XP sp3, IE8 and all updates. Except 3 Logitech webcam C615 updates that all 3 failed to install with the same error code 0 x 80070103.  I have installed and uninstalled my software of Logitech C615, drivers and all a few times, hoping to redo the programwork. The program worked the first time I added it perfectly for almost a week, then without my knowledge at the time I had 3 virus severe threat (which I've taken care of via MSE) a week or so later when I discovered it. I don't know if this is related, but the screen would go black and dead when we tried to use the webcam, it does simply not at all. It's weird that on the same day I've updated these 3 updates failed was the day that I got the virus. So, I uninstalled the program overall, thinking the problem was the webcam and re-installed. It's the same thing, and Yes, the drivers were very good. I had yet to understand and fix the virus. So, I uninstalled it again. Still it wouldn't work. Then, viruses have been found and fixed. Now, here is my current problem. I'm trying to uninstall the Logitech Webcam Software C615 Ain Add/Remove Programs, and it will not uninstall! I '; worm tried and tried. Whenever a screen that is supposed to appear and ask you what parts you want to uninstall tries to ride, flashes briefly and then disappears, leaving me unable to uninstall. I tried the fix from Microsoft, but it without success. All parts of the program that I finally tried to do an unintall advanced disappeared (I think) except the software part. Help! Thank you!            KinaPO

Hello

1. What is the full message of error/popup?

2 have what Microsoft Fixit you tried to solve the problem?

3 What problem confined to a specific program? You are able to uninstall other programs?

Looks like some third-party programs is blocking. This can also occur if the computer is still infected with a virus.

Method 1:

I suggest to run the Fixit and try to uninstall the program manually.

Solve problems with programs that cannot be installed or uninstalled

http://support.Microsoft.com/mats/program_install_and_uninstall/

If you have already tried, you can proceed to the next method.

Method 2:

Put the computer in a State of boot is a way to know which application is causing this problem.

To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

Step 1: Follow the steps in the link below to do the same thing:

How to configure Windows XP to start in a "clean boot" State

Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

Step 2: To configure Windows to use a Normal startup state

After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

a. Click Start and then click Run.

b. type msconfig and click OK. The System Configuration Utility dialog box appears.

c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

d. When you are prompted, click on restart to restart the computer.

Method 3:

Run a scan antivirus on your computer.

www.Microsoft.com/Security/Scanner

 
Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
 

If the problem persists, you can report the issue in the Logitech forums for more information:

http://forums.Logitech.com/T5/webcams/BD-p/quickcam_software

Hope this information helps.

Tags: Windows

Similar Questions

  • Impossible to uninstall/install the software printer, error message.

    LaserJet 1006

    Windows XP

    I have recently been unable to use my printer because it (for some reason any) is more loaded into my computer (software).

    I have tried both online and using the printers software disk both uninstall AND install without success. Since I did a computer search on HP 1006 and deleted these files (thinking it would be like an uninstall, it wasn't). When I go to "Add/Remove programs it lists the printer and indicates that the file size is 4.13 MB." When I click on it to remove the file I get a pop-up error with the title: "Microsoft Visual C ++ Runtime Library' and it reads: Program:...-HP\{175f6cb4-fd39-4311-8588-d7486c05c52c}-\uninstall.exe.

    He continues to say, "this application has requested the execution to terminate in an unusual way. Please contact support team of the application for more information. »

    Any help is appreciated.

    Hi Iceman107,

    Unfortunately, because the problem is with the operating system and the printer works fine other computer. The only suggestion I can give at this moment would be to back up your data, and finally a complete system recovery on this computer or you can contact Microsoft about issues with the operating system. I can't suggest that you run programs that you look, especially if the Publisher could not be verified.

  • Impossible to uninstall the Roxio software and fails to say that I need to download the latest version of ISScript.msi

    I tried to uninstall the software of Rixio but it is not window pops up saying I have download the latest version of ISScript.msi. How can I install and its site please

    Original title: ISScript.msi

    Hello

    To resolve this problem, you need to determine the version number of the IsScript engine you need, download it and install it.

    (a) delete the folder C:\Program Files\Common Files\InstallShield\Driver from the machine.

    (b) make a right click on the Setup file that you are trying to install, and then select Properties.

    (c) the typical names for installation files are setup.exe, update.exe, installer.exe, etc..

    Examine the file Version field to determine the version number of the IsScript engine you need:
    If the file version number is 2.0 x or less, download the IKernel engine and install it on your computer.

    Download IkernelUpdate.exe

    Once downloaded, double-click it. This installs the IKernel engine, which should solve the problem.
    If the file version number starts with 7, download the following ISScript.msi file and install it on your computer.

    Download IsScript7x.zip
    Unzip the above using the WinZip utility.

    Double-click the IsScript.msi file. This installs the IsScript engine, which should solve the problem.
    If the file version number starts with 8, download the following IsScript8.msi file and install it on your computer.

    Download IsScript8.zip
    Unzip the above using the WinZip utility.

    Double-click the IsScript8.msi file. This installs the IsScript engine, which should solve the problem.
    If the file version number starts with 9, download the following IsScript9.msi file and install it on your computer.
    Download IsScript9.zip

    Unzip the above using the WinZip utility.
    Double-click the IsScript9.msi file. This installs the IsScript engine, which should solve the problem.

    WARNING:

    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • Compatibility of Logitech Webcam

    The Logitech Quickcam Webcam Chat list model No.: 961462-0403 as compatible Windows 7 64 bit.  I don't see anywhere that Logitech would agree with you.

    Logitech Webcam Software (LWS) with Vid 1.1 x 64 seems to work,
    but Quickcam Chat Webcam
    Model No.: 961462-0403
    M/N V-UBQ42
    n/p 860-000168 is not listed as compatible.
    I believe that this model is sold at Wal-Mart!
    Do you think you and Logitech can get on the same page?
    Thanx

    Hello Fedora,

    You are 100% correct that Logitech Quickcam Chat Webcam is compatible with Win 7. Visit this link:
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?s=Logitech%20Quickcam%20Chat%20Webcam&OS=64-bit&type=hardware

    You can try it for yourself by installing it on your computer windows 7. If it is not detected or does not behave as it was supposed to include then don't panic.

    Try to install the device in compatibility mode for Vista or XP with Service pack of your choice.
    * Right click on the program executable (it ends with .exe), then click [Properties]
    * Click the [compatibility] tab to open the abc32. EXE property sheet.
    * Click on the [run this program in compatibility mode for:] box, and then select the operating system you want to invoke compatibility for the menu drop down.
    * Click [apply] then [OK] to exit the property sheet.

    http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

    Good luck $

  • Impossible to uninstall the software for a webcam creative labs.

    Impossible to uninstall the software for a webcam creative labs.

    Hello

    Thank you for reaching out to the Microsoft Community.

    According to the description, it seems that you cannot uninstall the webcam creative labs computer software.

    1. that you get an error trying to delete the software?

    2 has there been recent changes made on the computer before the show?

    I will certainly help you in uninstalling the software of the webcam. Here are some methods that you can try in order to solve the problem.

    Method 1: Fix problems with programs that cannot be installed or uninstalled

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Method 2: How to troubleshoot problems when you install or uninstall programs on a Windows computer

    http://support.Microsoft.com/kb/2438651

    If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

  • Impossible to go from win7 home to win8 because can not uninstall Broadcom Bluetooth software...

    Impossible to go from win7 home to win8 because can not uninstall Broadcom Bluetooth software...

    Open the Device Manager and try to uninstall it.

    Click Start, type: Device Manager

    Press enter

    Expand your network

    Right-click the Broadcom Bluetooth card

    Click on uninstall.

    Run Setup again

  • Impossible to uninstall Apple Software Update program, get the error "there is a problem with this Windows package install."

    I need to uninstall the Apple software update program, but cannot.  Message reads as follows: "there is a problem with this Windows package install."  A requirement of the program to complete this installation could not be executed. Contact your provider to support personal or package.  I have Windows 7 Professional.

    I need to uninstall the Apple software update program, but cannot.  Message reads as follows: "there is a problem with this Windows package install."  A requirement of the program to complete this installation could not be executed. Contact your provider to support personal or package.  I have Windows 7 Professional.

    Hi, CA Bill.

    Start the Windows Installer service.

    1. Click Start, type Services.msc and press [ENTER]

    2. double-click on Windows Installer.

    3. set the Windows Installer to Manual startup type.

    4. Click Start to start the service. Note the error message, if any.

    5. click on OK.

    Start uninstalling software Apple

    If the above fails, use CCleaner uninstaller

    http://www.Piriform.com/CCleaner/screenshots

    See the help link - below
    To remove, and then reinstall iTunes to windows 7.

    http://support.Apple.com/kb/HT1923

    Web site support Contact Apple for additional assistance on the issue:
    http://discussions.info.Apple.com/index.jspa

    OR http://www.Apple.com/support

  • BlackBerry Smartphones impossible to uninstall previous versions of software

    I just got a new Curve 8330 and wanted to install the last v4.5 of office under Windows XP SP2 software.

    I have a 7250 and then a 8703e.  At the time I had the 7250, I installed the Software v4.2.  When I arrived the 8703e, I installed the software of her CD which is entitled "BlackBerry v4.1.0 for the 8703e series Wireless Device".  Both are currently present in Windows ' Add/Remove Programs ".

    When I try to uninstall the Software v4.2, he invites me to "disc of BlackBerry Desktop Software 4.2".  I do not have a disk (I don't even remember if I installed it on a CD or on the web), so I downloaded site Web de Blackberry v4.2 and tried to re - install with the hope that it would be to decompress the installation files or something so I could fool the uninstall program thinking I had the CD.  No luck... He tells me that I have a newer version already installed.

    Okay, so I'm trying to uninstall the 8703e software, and he invites me to "BlackBerry 8703e.msi" which is not on my computer anywhere.  In fact, I have the installation CD, so I only pop in and find this file... Nope, not on the CD.  I even try pointing the prompt to the msi installer file which is here ("BlackBerry Desktop Software.msi"), but it's not accept it.  Thinking that maybe I can re - install the software to see if it unpacks the necessary msi file, it tells me that I have a newer version already installed.

    So, I'm basically in a circle without end... Can someone help me with this please?  Thanks in advance!

    Try these instructions... Perform an uninstall of BlackBerry Desktop Software

  • Blue screen with Logitech Webcam C500 under XP SP3

    I have a logitech C200 webcam working OK and then he started to do "Blue screen" of Windows.  I thought he might have a failure with the C200 camera, so I bought a new Logitech C500.  I uninstalled the software for the C200. restarted the computer and follow the instructions to install the C500, including updating to the latest drivers available on the net.  Problem is that the C500 is originally the same question.  Immediately I plug the usb cable into the computer, the blue screen appears.

    I suggest that contact you Logitech as show the specifications that the Logitech Webcam C500 is compatible with Windows 7, Windows Vista and Windows XP SP2 and later versions.

    http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/12676/section/Troubleshoot/CRID/435/lt_product_id/6303/tabs/1, 3.2, 5/cl/us, en/kw.

    Troubleshooting for the Logitech webcam:
    http://Logitech-en-AMR.custhelp.com/app/answers/list/section/Troubleshoot/session/L2F2LzEvc2lkL3BUVVVlN3Vr

    If it's blue screen again, get the blue screen error message because it will help you determine the cause.
    In addition, blue screens (not all) are material usually associated drivers.

    I hope this helps.

    Marilyn

  • Firefox tab disappeared, have mysearchdial. No program of mysearchdial in installed programs impossible to uninstall. no way to manage add-ons with or without tab firefox orange

    Could not find a way to get rid of mysearchdial. no tab orange browser firefox so can't get to manage no Add ons and any program mysearchdial in the installed programs in Control Panel, so it is impossible to uninstall.

    tried to change the home page but no matter what I do, mysearch dial remains there. went to mysearchdial web page, followed their instructions, no use. Tried to run malwarebytes anti-malware and it has not seen anything like that. my browser opens really slow. The Microsoft Security Essentials is not helping either. I tried booting from the ERD, start did not find any problem. the search on my computer for mysearchdial or something unknown shows nothing. ran put utilities at the point in the registry, found nothing.

    What should I try next? Thank you very much.

    Hello

    The easiest way is probably to make a Reset of Firefox. This will return Firefox to its default settings. Your personal data (bookmarks, history, etc.) will be saved, but you will have to reinstall all your addons.

    Firefox - modules to reset and refresh settings

    If you don't arrive in the Firefox Orange menu to do the reset and then close Firefox and then hold down the SHIFT key while you open it. This will bring up a menu that gives you the ability to reset Firefox.

    The problem is that (as you've identified) there is a chance that Firefox will get hijacked again if you are unable to remove malware from your computer.

    You can try these free programs to search for malicious software that work with your existing anti-virus software:

    I also suggest looking at the list of programs for starting and turning off one you don't want to or don't recognize. All that is originally from the diversion of mysearchdial is likely to be listed in the startup list, because he wants to run as soon as the computer starts.

    I hope this helps. Let me know if not.

  • C855 satellite - cannot install the webcam software

    Hello

    yesterday, I uninstall my webcam TOSHIBA HD because it does not work and now I can not re installed it, and I have no camera on my laptop.

    How can I install the "TOSHIBA Web Camera HD?

    Thanks for the reply

    Livio

    > How can I install the "TOSHIBA Web Camera HD?

    There is no magic installation procedure.
    Just download the Toshiba webcam software, unzip the and run the exe file.
    All that s.

    If this does not work, your webcam module may be defective.

    You can see a webcam in Device Manager? He listed as a devie marked yellow exclamation or unknown?

    Also check the settings in the BIOS (BIOS-> advanced-> configuration of the system) if the webcam is enabled.

  • Downloaded DVD maker of the Trusted Installer, now impossible to uninstall.

    Downloaded DVD maker trust instaler, he said micresoft product, now impossible to uninstall, it takes on internet explore. What can be done.

    Original title: downloaded DVD the Trusted Installer maker, said it is micresoft product, now impossible to uninstall, Internet Explore. What can be done.

    What is the name of the author of DVD?
    Have you tried going into Control Panel (Add/Remove programs for Windows XP) and programs and features for Windows Vista and Windows 7 and uninstall the DVD maker?

    If you cannot remove programs uninstall, then it may be a virus or malicious software that you downloaded. If it was Microsoft, you have to go to http://www.microsoft.com/downloads and locate the program you want to install.

    If you don't have an antivirus, you can download Microsoft Security Essentials for free and see if it will remove the program. It protects against software viruses, spyware and other malicious software.
    Click below to download Microsoft Security Essentials.
    http://www.Microsoft.com/security_essentials/

    If it does not help to solve your problem, please provide details on the software.

    Thank you

  • Impossible to uninstall QuickTime.

    Impossible to uninstall QuickTime, returns the component that you are trying to use is on a network resource that is unavailable. He said also unable to find the QuickTime .msi installation package. Please, can someone help. I have searched all files, but cannot find, maybe geoff deleted.thanks.

    Hi geoffgover,

    ·          Did you the latest changes on the computer?

    Check the link below for thread of the Apple website and check if it helps.

    http://discussions.Apple.com/thread.jspa?MessageID=11572021

    Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

    http://support.Apple.com/kb/HT1925

    For additional support post your query in the forums of ITunes for Windows.

    http://discussions.Apple.com/category.jspa?categoryID=150

  • Logitech Webcam preview window

    Is there a live preview for webcam captures using Remote Scan on a server terminal server. My end-users are swearing up and down that they had a glimpse of lining up patients from a webcam capture in their EMR software. Remote scan is the capture of the image on a Logitech Webcam c210 using the Remote Scan Microsoft WDM driver. The Preview button is just take a picture not a live stream.

    Until the user logs from Server RemoteScan RemoteScan customer using the virtual channel it will be a live stream preview. If the direct connection via IP, there is no flow.

    If you have any questions please contact us at 406-721-0276.

  • How do we uninstall the maps4pc software, I tried everything I don't know and can't get rid of it, I can't do same hidden.

    How do we uninstall the maps4pc software, I tried everything I don't know and can't get rid of it, I can't do same hidden. It is what makes the impossible using other programs. Help! I only wanted a card and got it *.

    Hi RA48,

    I'm sorry to hear that you are facing problem with software uninstall PC Maps4. I would like to know more information about the issue, so that I could help you better.

    1. what happens when you try to uninstall the software or program?

    2. do you get any error code or error message?

    3 is it limited to this program or with all programs?

    4. that all the troubleshooting steps have been tried?

    If you haven't tried these troubleshooting steps, so let us try the following methods; I'm sure this will help you to solve the problem.

    Method 1:

    Run the fixit in the following Microsoft Fixit article and check if it works.

    Solve problems with programs that cannot be installed or uninstalled:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

    Method 2:

    Put the computer in a clean boot state and then try to uninstall the software/program and check if the problem persists.

    How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929135

    Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

    Also use Microsoft Safety Scanner and check if there is no threat of viruses.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

    Please reply with the status of the issue, so that we can better help you.

Maybe you are looking for

  • Envelopes (incoming e-mails) along the top of the screen are in practice no order are so useless, what is it for?

    I can't find the intuitive user interface, but I would like to use all the features that are useful.For the moment, I get, but the interface makes feel me stupid.

  • Feedly Extension will not be installed. Solutions?

    Apparently, some are not having problems with the extension installation (see the dates of the examinations on the sheet), but I am. It installed perfectly on Firefox 21 before (more problems with it later if). In FF 22 is no longer installed now. Wh

  • Windows 8: brightness of the screen changes (Satellite L855-11 t)

    Hello I own a satellite L855-11 t and installed Windows 8 Pro x 64 (full version DreamSpark). Everything works well except for one thing: I can't change the brightness of the screen. I installed the new drivers and PVAT, system driver, etc. (even of

  • Restore missing clip

    A few months ago, I lost most of my music videos (he was 15 but now it only shows 3 recent video and not the old video that I downloaded. Is there a way I can restore my music videos on my iPod (iPod Nano 4/5th generation). It happened when I downloa

  • How to use Robocopy to exclude directories?

    /XD directories [directories]...: exclude directories matching given names/paths. RoboCopy D:\ /MIR R:1 /W:1 /XD D:\System Volume Information\ Z:\, does someone has any suggestions on how to exclude a directory for Robocopy function? I do not underst