Impossible to update KB249163 on windows vista-error code 80070026

Original title: Windows Update problem

I can't install the update for Vista KB249163; get the error code 80070026.

Hello

1 did you do changes on the computer before the show?
2 are you able to install other updates successfully?
3 mention is the correct KB number.
Follow these methods.
 
Method 1: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
http://support.Microsoft.com/kb/929135
Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.
 
 
Method 2: temporarily disable the security software.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.
 
 
Method 3: you can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
 
 
Method 4: follow the steps in the article.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
 
Response with the correct number of Ko, Ko you mentioned talking about article:
The KB 249163 talks about 'Orders seen in a Network Trace LDAP':

Tags: Windows

Similar Questions

  • Impossible to insatll SP1 in windows vista error code: 0x8007000B.

    Original title: error code: 0x8007000B

    I am trying to install SP1 on my computer. Download stopped and got the error code: 0x8007000B

    Hello

    Thanks for posting your question on the Forums of community of Microsoft.

    According to the description, I see that you unable to install SP1 of windows Vista that you have found a mistake 0x8007000B.

    I would like you to follow the article to resolve the problem:

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    http://support.Microsoft.com/kb/947366

    Reference:

    http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

     

    If you need help with windows, just tell me and we will be happy to help you

  • I use windows vista x 64 and whenever I try to update definitions for windows defender error code 0 x 80240022. Any ideas on how to solve this problem? Thank you

    Windows vista sp2 64-bit
    Windows defender error code 0 x 80240022.
    Also, I read the bandages and still cannot find a solution.

    Hi Mark

    You can try to manually download the update of windows Defender by going in the following website http://support.microsoft.com/kb/923159 and throguh read the statement if you are having trouble, please contact 866-727-2338 for the USA and UK PC security please dial 0844-800-2400 and if not try to go on the site Web create a case and mention details such as the delivers name and name , contact the number and that the concern team can help you and the link is https://consumersecuritysupport.microsoft.com/default.aspx?altbrand=true

    Concerning

    Paul

  • Vista - Error Code: 80070026 (cannot install KB978886)

    try to install the update for Windows Vista (kb978886) security - fails - error code 80070026

    Help me if you can - thanks

    Start by reading:

    What information to post in the Windows Update forum
    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

    ==================================

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Update Windows Vista error Code 80070490

    Unable to update Vista, the error is of course Coded "80070490" is there a solution to this problem in Microsoftaving updates to make sure that the machine is working properly

  • Unable to update Windows Vista, Error code: 800B 001, "Windows has encountered an unknown error.

    Its been a while now that I can't download and update my Windows Vista Home Premium(64-bit), every time I click on install updates, it starts to download the updates, and when its done and the error occurs, code error: 800 B 001, "Windows has encountered an unknown error" and when when I try again... Error code: 80240016, "Windows update currently installed other updates. Please try again later in a few minutes. »
    I downloaded the update Windows Vista SP2 site Web Microsofts (Yes, im still in SP1), thinking it could slove the question, I can not install, when I clicked to install it, it says: "the form specified for the subject is not one supported or known by the specified trust provider."

    My Vista is genuine and activated, came with my laptop HP HDX16 1050EE.
    This issue has been hard for awhile and its a little boring.
    Thanks in advance.

    Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. (No, Symantec Support never say this.) See if the following solves your problems:

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of the 2010 version of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

    8 test cycle.

    NB: Your Norton application can disable Windows Defender by default.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • 80073AA2 Windows Vista error code update KB973917 and KB970430 Frustration!

    I have a problem installing the updates on my 32-bit Windows Vista laptop. I have both updates KB973917 and KB970430 both indicate the error code 80073AA2 and two KB976325 and KB971737 updates showing the error code 800F0826.  The laptop has the message that it is install update 3 of 3, is 100% then says that the updates have not been configured correctly - he keeps trying to install updates.

    I find it quite frustrating because this is the second time (the last was SP2) this year that updates have not properly configured and as a geek no I'm not able to settle this issue myself!  I got a very helpful guys at Microsoft call me before; However, if I can get some advice on how to fix myself I would be very grateful!

    Thank you, Maggie Ross.

    @MeggyRoss: Try this triple McAfee fix, especially if you are using McAfee Security Center-Online http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Update Windows Vista error code A 8024, 000

    I just replaced my hard drive due to the old one failed and had to re - install Windows Vista Home Premium on my laptop.

    After the operating system has been installed again, I went to check out the updates and I got error code A 8024, 000.

    I have an Acer Aspire 7720-6569 2 GB of Ram. Intel Core 2 Duo T5450 processor.

    Was from my old hard drive WD Scorpio 160 GB and I replaced it with WD Blue 320.

    I just replaced my hard drive due to the old one failed and had to re - install Windows Vista Home Premium on my laptop.

    After the operating system has been installed again, I went to check out the updates and I got error code A 8024, 000.

    I have an Acer Aspire 7720-6569 2 GB of Ram. Intel Core 2 Duo T5450 processor.

    Was from my old hard drive WD Scorpio 160 GB and I replaced it with WD Blue 320.

    Already answered here... Please take a look

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Vista-update-error-code-8024a000-after/c5f85a66-7418-41de-aa31-208071a9ea85

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-perform-Windows-Update-error-code/ccc838fe-21ec-460B-8b0b-6863697a5550

  • Update Windows Vista error code A 8024, 000 after replacing the HARD drive

    Hello

    I had to replace the failed hard drive on my laptop (I replaced it with the same brand and size).

    After that I used the recovery CD, Windows Update gives me error code A 8024, 000.

    I tried the solution provided in this thread, but did not work for me:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7?page=1&TM=1337378075490

    I also tried to load the Microsoft Fixit utility, which has not installed, I tried to update the installer but it gave me an error as well. Also the installation of SP2 crashed with an error (8000ffff if I remember correctly)

    Any help is appreciated.

    Thank you.

    Eugen

    Hello

    1. which utility Microsoft Fixit did you tried to load?
    2. what happened when you tried to load the Microsoft Fixit utility?
    3. what was the error message when you try to update the installer?

     
    Method 1: Try running the fix - it of the article mentioned below, if you not him have not yet tried.
    The problem with Microsoft Windows Update is not working:
    http://support.Microsoft.com/mats/windows_update/
    Method 2: run SFC scan. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

    Scan sfc enforcement procedure:
    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    b. click on continue or provide administrator credentials if prompted.
    c. in the type in the following command prompt window and press ENTER:

    sfc/scannow
    Refer to this article for more information:
    http://support.Microsoft.com/kb/929833
     
    Method 3:
    0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update:
    http://support.Microsoft.com/kb/946414
    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://support.Microsoft.com/kb/322756/
    Download Windows Vista Service pack from here:
    How to obtain the latest Windows Vista service pack
    http://support.Microsoft.com/kb/935791
  • Update Windows Vista error code 80071AA7

    Need help with fixing update error code 80071AA7

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

  • Impossible to update Kb2570791 failed with the error code 80070020

    Microsoft windows vista KB2570791 security update cannot be installed with many attempts and each time showed error code 80070020.  Anyone have asolution or can have the experienced, like very some remedy.

    Thank you very much
    Willy

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/im-getting-a-failed-popup-message-on-trying-to/e9e7b42d-4fa8-4842-a7f8-738cf1bbb009

    0 x 80070020 -2147024864 STIERR_SHARING_VIOLATION the process cannot access the file because it is being used by another process

    You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

    http://support.Microsoft.com/kb/883825>

    UTC/GMT is 10:47 Tuesday, September 6, 2011

  • 1719 and 1904, in Windows Vista error codes

    Error code 1904 "Module C:\Program files (x 86) \Common Files\PctelEapPeer Authentication\PctelEapPeer.dll cannot be saved."  HRESULT-2147024703. Please contact the support staff.  ABORT RETRY IGNORE.  I hit ignore and then you get

    1719 error code - Windows Installer service could not be accessed.  Contact your support team to check that it is properly registered and activated.

    I am my only support.

    I had so many problems with Windows Vista Edition Home Premium 64 bit and now this.  I tried to install the software from AT & T and to keep these two errors.  I went to every forum, website, I find and have finally decided that I have really no idea how fix this on my own.  Many other users have almost the same problem.  I tried everything what they do with no luck. Another suggestion was to create a different user account and try to install to make sure that my account was not damaged.  I don't do that too, no help.  Same problem, same error codes. I also check in 'Services' and the Windows Installer is started.

    I ran Malwarebits (no problem), HijackThis (no problem), Root Kit/registry scan (no problem found), Temp File Cleaner (he gave me more space, which is great).  I done sfc scan and got this.  I went on the MC website to know how to read the CBS and it was a joke, I was completely lost.

    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
    C:\Windows\System32>sfc/scannow
    Start scanning system.  This process will take time.
    Start of the phase of verification of the scanning system.
    Full check of 100%.
    Windows resource protection found corrupt files but was unable to repair some of th
    EM.
    Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
    C:\Windows\Logs\CBS\CBS.log
    C:\Windows\System32 >

    Another site of MS site says to run a scan SIW, or maybe this is part of the same newspaper, I did both scans, read so many newspapers, they start all jostle.  Here are the results.

    ? XML version = "1.0" standalone = 'no '? >
    -
    -
    -








    -




    -




    So far, I know now I "Windows Resource Protection found corrupt files but was unable to solve some of them. . And I have no idea how to do to fix on my own.

    I then found a site to tell someone else to use the "Event Viewer", I did this and the answer showed me 2 events in the event log, I tried the "journal of the events online Help" and answer has been "No response to this code" but thanks for recording it, so Microsoft knows what are the elements it can find remedies for the future for.

    I found another person in the Vista Forum "BleepingComputer", (he had an error code of 1719 and said to reregister Windows Installer by using method 2, I went to this site and it struck me to death.  I have no intention (at least for myself) mess with my registry database.  Maybe if someone could guide me through it.  I had to do things with Vista I never thought that I would have and a generally unknown translates as I did.

    I hope you can tell from this hopeless thread how I am, so if you can help me in any way, I would be greatly appreciated.

    Thank you for your help in advance.

    SFC has NOT repaired all the corruption (and there was quite a bit - not as bad a I saw but a lot nonetheless).  It explains a lot about why you have problems as long as this corruption is everywhere in the room.  The only way to correct that corruption is an installation of repair/upgrade of the system with (if you can get your hands on a real Installation of Vista drive and this is the preferred option) or do a clean install - which is where we started (but at least you know now it is necessary and why).

    I don't know what problems you have had, and which have been fixed since--but that undertake you to pretty much a clean slate and that there should be no problem to be addressed (other than the effort to restore the systems back as it was before the relocations (even the repair/upgrade system requires some effort)).  I can't imagine re-, you will encounter problems (but I do not know what they were or that ccaused them, or what you need to do to fix them is very difficult to answer this question accurately).  I can just say that all the Vista system files will be replaced by fresh copies and which solves generally most issues with the exception of a few problems of compativility with some older software, or maybe you need to update some driverss of the device (and perhaps a few other issues that are related but not caused by the Vista software).

    Thanks for the comments: is apprecciated.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Will not install SP 1 for Windows Vista error code 800706BE.

    I try to install Service Pack 1 for Windows Vista and it continues to fail with the error code 800706BE and then my security/antivirus software detects a trojan virus. What can I do? As I would like to download the trial version of Office 2010.

    Just open the program (it may be possible from the notification area icon if you have an or there should be an entry in the menu start / all programs for the program) and most of the AV software that I have seen or used the option clearly identified on the main screen or another primary screen if there are tabs or on a toolbar or at worst a deep layer in the options bar menu.  If there are options, clear all.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Impossible to update Photoshop Elements 14.1; Error code: U44M1I210

    I constantly get the error Code when you try to install the update 14.1 of Photoshop elements.  Direction is to contact Customer Support, which seems to be impossible.

    What does this error code mean?

    Hello

    Please follow these steps to resolve this problem.

    1. Create an expense account user with administrative privileges on your computer.
    2. Try to reinstall the update. The product is updated for all users on the computer.

    We know in case you have any questions.

    Kind regards

    Abhishek Seth.

  • Windows vista - error Code: 66A (unable to install KB2446708)

    I tried to install several times, but it still appears

    See the Srinivas R response to a previous post about the error code:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/31151006-dfd4-4B93-85EC-26ac470df87c

    04/22 / 1104:27: 47 pm

Maybe you are looking for

  • How can I cancel a download or down some programs?

    After you're done watching some programs, I close as I know not, but someone can always access it by clicking history. I don't know how to delete it. When I click on the Firefox menu, this is what happens: restore; move; size; minimize; maximize; clo

  • problems with wifi after update? anyone?

    I use A953, just updated to build mils2_u6_4.1 - 22, the system version is: 64.1.22.S953. Retail.en.DE So far, I like the update, looks cool, like the animation of the screen-go-to-sleep But, my WiFi is not working properly, there are just a couple o

  • Modbus: two words float

    I write the values for my meter with modbus/TCP and the set point is a float on 2 registers. Documentation, says this: Floating point parameters are 4 bytes long and are mapped to two consecutive Modbusregisters. The floats are single precision IEEE

  • privacy settings for Lifelog?

    I like to use SWR10 and Lifelog to track my activity, but I want some control over the data collected. For example, I like the account not be tracked, but I don't want my GPS position followed in Lifelog. Is there a setting for this?

  • PSR 527W - external WAN ping port

    Hello As a test of raw it is convenient for us to external ping tne WAN port on the SRP 527W, gives us a quick idea of the question of if it will respond. Can someone advise how we configure the SRP 527W for this purpose? FYI, we have the inbulit RPS