Impossible to update the database of location

Similar Questions

• Impossible to update the database type in the Task Manager

  Hello
  
  I installed Oracle BI EE 10.1.3.4 with Oracle database 11 g (11.1.0.6.0) on my windows XP laptop.
  
  Also created a separate database and the schema for the Scheduler.
  
  Cannot update the database Type in the Task Manager for Oracle 11.1, I don't see any option for Oracle 11 g. The only available options of oracle are Oracle 8i, 9i, 10g R1 and 10g R2.
  
  The document on the Oracle 11.1.0.6.0 stated system requirements or higher versions are data sources supported for Oracle BI EE.
  
  Is someone did encounter this problem with BI EE 10.1.3.4?
  
  Thank you

  Simply use 10 g 2,
  Thus there is no 11G in the tool.

• "Update the database", then stop playing audiobooks

  Hello.  I'm very frustrated and I hope you can help!

  I have been happily using my SansaClip for about eight months, but then a few weeks ago it stopped working correctly.

  When I turn it on, I get the message "Update the database" with a progress bar.  She fills in one or two seconds, and then for the regular menu, and looks like normal.  However, after listening to my audio book for a minute or two it just turns off.

  I tried to do a hard reset, reformatting, reset, and I've updated the firmware to 01.01.30, but no luck.

  Now, it behaves even more erratic, for example not immediately turn on, turn off even before I can choose music, etc.  The battery bar shows about 75% full.

  Any advice?

  Thank you.

  Lori

  Connect the player in MSC mode.  (Go to settings > USB Mode > MSCto put the player in MSC mode)

  Connect it to the computer.

  Then use Windows Explorer to do a Format (right click on the device and select Format)

  Next

  Unplug the unit and go to the settings menu and select "Format".

  This should clean the Clip and make it ready to transfer files again.

  You must return to the MTP mode.

• E250 crashes to update the database

  OK, so I went and re - sync my player the other day.  Since then, when I turn it on, it starts to update the database, and then the screen goes crazy.  Nothing but colored lines.  I can stop, but it will do so when turned on.  I tried to boot from the recovery partition, and put the latest firmware files, it seemed to load, then again became 'crazy' at startup.  It will also do so if I connect to my PC and will not be detected...

  Any help would be appreciated.

  Thank you.

  Jason

  First, just for him heck of it, try to take out the battery (don't lose the screws bit) for a minute or two. It can reset.

  The problem is probably a file that has been bad or has been corrupted by mysterious Sansa bugs. If you are able to connect to the computer in MSC mode, you can run ChkDsk to zap the wrong file.

  If not, you will probably have to format and, unfortunately, lose all the music/video/pictures on it. Create a new empty folder on your desktop called sansa.fmt, go into the recovery partition and drag the sansa.fmt in there. Do not FORMAT THE PARTITION RECOVERY VIA WINDOWS - YOU're going to DESTROY VITAL FILES. When you disconnect, the Sansa will set up. Recharge a few albums at a time. Your most recent file was probably the one that crashed it.

  If it was the fault of a file that you added - and personally and not scientific, I don't think that it's always - you should look at the tags of your files and use a good tagging program, mp3tag. More information on ID3 tags here.

• Sansa E280 going to update the database when it is connected to the computer

  Hello

  Just at the moment where I was getting things straightened on my drive and everything was working fine, I plugged my E280 on my computer and it says "Refresh database" on the player and my computer does not see the E280.

  I've been looking around on the forum, and there are so many different options to try (of: delete the SYSTEM folder, which I was told not; to turn off the drive and engaging the hold button and the button to rewind when connecting to the computer, etc., which I tried ~ nothing; take off Firmware and put one on; do something in Recovery Mode) , which I have no idea how do; etc.).  Sorry, but I hope you get my point... What do I do?

  Thanks for any help once more.

  Thank you clu31355.  I tried the very first thing that you said ' put in operation and allow it to update the database (if desired) before you connect. "and voila - it worked.

  These Sansas seem to be quite ticklish - who knows what will happen?

• Impossible to update the details of credit card, get the PMT_000008 error message

  Impossible to update the details of credit card, get the PMT_000008 error message all the time

  Is this another card or the same card but with slightly different details? (As the expiration date).

  Manage your Adobe Creative Cloud membership (Use the link 'Contact us' at the bottom, bottom right.)

• I am trying to download the free trial for Mac, but it says that my system is no longer supported. Currently, my mac runs on 10.8.5 version but it seems impossible to update the mac. Someone knows how to fix this?

  I am trying to download the free trial for Mac, but it says that my system is no longer supported. Currently, my mac runs on 10.8.5 version but it seems impossible to update the mac. Someone knows how to fix this?

  Hi elizabethg,.

  Photoshop CC 2015 would require minimum Mac OS 10.9, therefor you can maximum download the trial version of Photoshop CC 2014 which is compatible with the version of Mac OS you have.

  Download link: direct download links of Adobe CC 2014: Creative Cloud 2014 Release. ProDesignTools

  We will also recommend you use Photoshop CS6 trial, because if in case you want to buy the trial then its available through the third party dealer as a standalone application.

  Download Creative Suite 6 applications

  Configuration of Photoshop

  Kind regards

  Mohit

• Update the database without affecting the application

  Hi all
  
  11.5.10.2 on linux.
  
  
  Recently, we are improving our test environment with the last group of patches of SOUL with 2 patches huge. now, the requirement is to update the database with the most recent data. I'm quite aware that refreshing db only will affect the fixes we applied. There is no work around for this?
  
  
  Kai

  Kai,

  You must apply the patches again after updating the database using "options = nocopyportion, nogenerateportion". In doing so, the part of the database apply only, and the database will be in phase with the application with respect to these two patches.

  Thank you
  Hussein

• Impossible to update the location of the repository going on OEM. Error "failed to apply the information in the repository.

  Hi gurus,

  I'm trying to change my installation of 11g OBIEE (horizontal scale). To do this, I created a share location for the RPD, catalogue, cache global and Scheduler scripts. I placed my SPR files and catalog also under the shared location.

  When I'm trying to update the shared in OEM location, it does not update the location of the repository of the action, get the error "'did not apply the repository information". "

  I can't solve this problem.

  
  

  Plz help me in this consider as soon as POSSIBLE.

  Kind regards

  MK.
  

  I discovered the cause of this problem after a lot of trial and error.

  The problem is I'm trying to specify the folder is not empty. There is a folder in this directory, because of this, the problem persists.

  Once I deleted the hidden folder and make sure the directory is empty, I restarted the services now everything went well.

  Kind regards

  MK.

• Difficulties to use Task Scheduler to update the database of the program

  Hello

  I would like Win 7 Task Scheduler to cause Locate32.exe Explorer file update there database every 45 minutes when I am connected. (Locate32 can do it by itself, but must operate continuously in the background to do).  I'm obviously not in the right info, because it does not work for me. I got the details to enter another site, as I am not familiar with the Task Scheduler.

  Task field name walked - locate32.

  In trigger I select daily

  then by selecting a time of 5 minutes before present, to test works

  then, in the action, I'm selecting Start a program

  then in program/script I enter 'C:\ProgramFiles\Locate\locate32 '.

  then in arguments - U

  Usually it is a notification when I update of database Locate32. This does not occur with the scheduled task, and when I look in the Task Scheduler for tasks that have been made, this one does.

  I checked the user information is correct.

  Please could someone tell me what I should do instead? Thank you, Jay

  Hello

  We apologize late in the response. This problem can be caused by incorrect settings.

  To display hidden scheduled tasks, follow these steps:

  1. Click Start. In the search box, type Task Scheduler. Then, in the list programs, click Task Scheduler.

  2. On the view menu, click Show hidden tasks.

  Try to re-create the task and check if it helps:

  1. Press the Windows key + R > type taskschd.msc and press enter (it will launch the Task Scheduler)
  2. Click with the left button of the right pane on the Task Scheduler Library > open Action on the menu at the top of the page > new folder... > name MyTasks > click OK
  3. Left-click on the MyTasks > menu, choose Action > create a basic task (it open Assistant tasks)
  4. You can enter the name , for example "restart" and press Next
  5. In the trigger section, you can specify when you want to run your task, for example:
     • Select daily and press Next
     • Now, you can specify the day, time and the game to be repeated daily, after that press Next
  6. In the Action section, you can choose what you want to run, for example, restart your system to do this:
     • Choose start a program and press Next
     • in the area of program/script, type shutdown /r and press next
  7. And that's all, you can press Finish

  Let us know the status.

• Update the database

  Hello everyone
  I was a novice, recently made an update of database program has encountered difficulties, and to view the data in a table to view and change any value, but how do I change the data in the table after a single batch update the corresponding database table (similar to a storage operation library and warehouse) , I hope you expert advice, there are examples of the theme or reference to find out the best thanks!

  Help-> find examples-> database

  /Y

• Impossible to update the drivers in a new administrative profile

  I have somehow deleted my admin profile... I tried to create another profile with admin permissions and now impossible to update my drivers... Help, please

  Hello

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Impossible to update the Information contained in the University Complutense of MADRID 11.1.1.8

  Hello

  I'm unable to update content at the University Complutense of MADRID 11.1.1.8 information. the error is 'Impossible to update content' or '< abc_abc_2015_081763 >' Record the content ID must be specified

  In general the Configurations page, auto assign an ID of content to the consignment is selected and abc_abc_2015_ is provided.

  I don't know why its not allowing me to update information.

  Thank you

  Hello

  The problem is solved, said dDocName and make hid in profile.

  Thank you.

• Error: The database file location: [INS-32012] failed to create the directory.

  Hello

  I have a problem with the installation of database 11 g 2 on OL5.

  Error:

  Location of the database file: [INS-32012] failed to create the directory.

  Although

  drwxr-xr-x 2 root oinstall 4096 Apr 9 17:56 oradata

  drwxr-xr-x 3 755 oinstall 4096 Apr 9 16:27 products

  U01/app/oracle/a 755 permission

  Thank you

  Abhishek

  chmod-r 755/U01

  chown R oracle: oinstall/U01

  the second command change the user and the group owner Of/U01 (including all subdirectories and files) for oracle and oinstall respectively.

  HTH

  Tobi

  Tobi & #39; Oracle DBA s & amp; Blog of UNIX

• Impossible to update the details of the employee

  Hi friends,

  I developed a page request. The results of the employee are shown in the table and a column of the table that has empid is a command link. By clicking on this link, I am able to go to a page containing the details of the employee. However when I try to update the details of the employee, I get the following error

  ORA-42399: impossible to perform a DML operation on a view read-only ORA-06512

  I checked the view object. It is editable. No idea where I am going wrong.

  Thank you

  The ViewObject (VO) you use for the query is not based on an EntiryObject (EO). Only your EOs based are able to update the data. You can do two things:

  (1) base you VO on an EO

  (2) use the retail ID to open a form in a different VO, inspired by the EO and modify the data here. An example for this can be found here http://tompeez.wordpress.com/2011/07/31/using-diferent-vos-for-master-detail-navigation/

  Timo