Impossible to update windows vista sp2 error 0x0800f0900

Similar Questions

• Not to install Windows Vista SP2 error Code 80070005

  I tried to install Windows Vista SP2 32 bit and I have SP1. When it is done install says it failed and it gives me error Code 80070005. And I do not have enough disk space. Any suggestions?

  Hi, GregDaSpider,

  Try the resolutions listed here:

  0 x 80070005 access denied. You are not allowed to perform the requested operation.

  http://support.Microsoft.com/kb/816731

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  http://support.Microsoft.com/kb/968003

• Impossible to update windows xp, 0x80440A error code

  I could not update windows xp, 0x80440A error code

  0 x 80240036 and 0x8024400A

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• After application of update Windows Vista SP2, FSX will not start

  FSX is not started after that I applied Windows VISTA Sp2. When the process is considered to be a task manager, FSX.exe seems to CPU to make loops. Are there not the method to solve something?

  Hi BuyIntel,

  Thanks for posting on the Forum of answers.

  I suggest to backup your saved games and reinstall the program.
  Something in the Service Pack may have corrupted some aspects of FSX, this should solve it.

  I suggest also to visit your video card manufacturers website to download the latest drivers and re-installation of the unit.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error updating Windows Vista Sp2 ox50004005

  Dear Admins,

  I try to update my windows vista Sp1 to SP2, but it gives the ox50004005 error code. updating until the last stage 3 but after that he brings updated.

  Please, I can't use the new programs, they all want SP2. Also, windows live messenger.

  Thank you.

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. is this really an error 0 x 80004005 (vs 0 x 50004005)?

  ====================================

  Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack.
  http://support.Microsoft.com/kb/967818

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Corruption ESENT/JET: impossible to verify updates | Windows Vista SP2

  I have a Dell Inspiron 1525 that had a problem with the hard drive. I replaced the hard drive WD 750gig HD and has restored a factory. When I go to update, I get an error that Windows Update cannot currentley check updates because the service is not running. When I check the update service, it looks like its operation. Audit of the newspapers show that suite:
  Level Date and time Source event ID special category information
  14/10/2011-13:08:19 1013 Microsoft-Windows-Search research service Windows Search Service stopped normally. Information
  14/10/2011 Microsoft Search service - Windows - search 1010 13:08:19 the Windows Search Service has removed the old catalog. WARNING 14/10/2011 13:08:19 Microsoft-Windows-search 1008 search service the Windows Search Service tries to remove the old catalog.
  Error 2011-10-14 13:08:19 Microsoft-Windows-search 1006 search service the Windows Search Service has not created the new system catalog. Internal error <4,0x8004117f>.
  Error 2011-10-14 13:08:19 Microsoft-Windows-9000 service search 'the Windows Search Service cannot open the Jet property store. Details: The content index server cannot update or access information because of a database error. Stop and restart the search service. If the problem persists, reset and recrawl the content index. In some cases, it may be necessary to delete and recreate the content index. (0x8004117f) CatalogDB: 19:14:21 10/13/2011: CatalogDB Corruption JetInit: 2011-10-13 19:14:21: catdbsvc.cpp on line #747 has encountered error JET-583

  I did a search for this error and Im see articles on corruption ESENT/JET on 4K sector hard drives so I followed the instructions and asked the fix for microsoft in favor KB 2553708. I received the fix and got an error when you try to apply the update. "Setup has encountered an error: 0xc8000247" I was able to apply the update on the original hard drive and fix the disk to the advanced format, but I'm still getting the error of image, partitions are aligned properley and I've updated to the latest drivers install IST.

  IM wondering what to do next? I feel I have tried everything.

  Hello Trinsic,

  Since there is a corruption with the packages on your system (shown in the papers above), it can be advantageous to try to run CheckSUR to automatically repair packages. If this fails, you will need to follow the instructions here: http://technet.microsoft.com/en-us/library/ee619779 (WS.10) .aspx to repair the corrupt package

• Impossible to update Windows Vista

  I was not able to receive updates for Vista for a while - took my "settings" system and it does not always help. Sometimes we'll sneak through but right now my message said: I have over 70 to download... very frustrating!

  Mom2Dogs,
  If you start Windows Update you get an error?  Open Windows Update, click on 'View update history' and see when the last update was successfully installed.  Are there updates failed?  If so, double-click one and let us know what is the error code.  What antivirus\firewall program are you running?

  Here are some troubleshooting Articles that you can try to start.
  Clean boot your PC, and then run Windows update

  Reset the Windows Update components

  Solve Windows Update installation issues

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to update Windows Vista Premium

  Error code 8000ffff keeps coming back and won't give me updates. can someone help me on this?  Thank you

  Hi Billbust48,
   
  Thank you for writing to Microsoft Windows Vista Answers.
   
  Access the link below and follow the steps, it could help us fix the problem.
  http://support.Microsoft.com/kb/946414
   
  Also, try to disable security for updates software and check if it works very well.
   
  If the issue is not fixed please answer back with the details:
  1 - is the first time, you receive the error during the update?
  2. were able to install update on this computer earlier?
  3. have you installed a clean copy of Vista or is it upgraded to Windows XP?
  4. do you have security software installed on the computer?
   
  I hope this helps.
   
  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Could not start the desktop Vista after installing Windows Vista SP2, error: 0XC0190036.

  Original title: vista sp2 problem.

  I have a laptop that I haven't used in a while.  I took on a trip and received the message that the updates are available.  One was SP2.  After the update is complete, it failed to start with a message OXC0190036.

  Startup Repair said that he could not solve the problem.  Restoration of the system has not only restore - labeled SP1 and it allows you to finalize the restoration of files and stays there.  (I waited for 3 hours without change).
  I have a XP install disc that I used before installing Win 7 on my desktop, but it does not give me the opportunity to do an installation.
  Can enter the command prompt, I'm perplexed as to what to do.
  I want to get this laptop that works so I can give to someone who needs a faster machine.
  Thank you.
  Harold Menzel

  Hello

  XP disk will not help you to fix Vista

  As the system restore does not try a startup repair and / or a restoration of the system using a Microsoft Vista DVD

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here are a few ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows Vista SP2 error: 8000ffff

  Hello!

  I recently uninstalled SP2 on my x 64 Vista (Home Premium) machine. However, Sidebar and IE no longer works, so I tried to reinstall SP2 through Windows Update. It downloaded and installed, but then threw me an error: 8000ffff. Then I tried to download the standalone installer from the Microsoft Web site. He gave me the same error. I tried to launch the Microsoft Support fix - it, but he did nothing. (I restart the computer). I tried to run the installer again, same results. I tried the instruction manual and fiddled with the registry, but no conflicting values were present. Help, please! I need SP2 back!

  Thank you!

  RyKona

  Hello

  Thank you for keeping us posted and I apologize for the delay in responding to your request.

  I wish that you run this utility virus scanning and archiving

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Alternatively, you can run this utility scan as well-

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  We know if you need help.

• Update Windows Vista 0xc8000222 error code

  original title: Vista error 0xc8000222 code

  I just installed a new hard drive and reinstalled vista and sp 1 & 2 but when I try to run the update or install fix powershell I get the 0xc8000222 error code. Any ideas?

  Hi Catherine,

  1. do you receive an error message when you try to install a specific update?

  2. you try to install the Microsoft FixIt utility?

  If yes try to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  You can also consult the following articles and check if it helps.

  You cannot install some programs or updates

  Problems with installing updates

  Hope this information is useful.

• Windows Vista SP2 error 800b0100 code. Please, someone send me these files.

  Hi, I have a Vista (Vista Home Premium x 86) computer that refuses to update the latest service pack.

  So, I ran the system update tool and it seems that some files missing or they are corrupted.
  Is it possible to send me these files? It's my CBS. JOURNAL
  These are my missing files:
  servicing\packages\Package_3_for_KB905866~31bf3856ad364e35~x86~~6.0.27.2.mum
  sservicing\packages\Package_for_KB905866~31bf3856ad364e35~x86~~6.0.27.2.mum
  x86_b659c3950e197346f1b4cf8b4fc38b44_31bf3856ad364e35_6.0.6000.16808_none_d3574d740c0fd295.manifest
  Thanks.Sorry for my English.
  It's my CheckSUR.log. Someone help me?
  =================================

  Preparation of control system was updated.

  Binary version 6.0.6001.22375

  Package, Version 5.0

  2009-07-04 00:34

  Checking deployment Packages

  Audit of manifest Package and catalogs.

  (f) CBS MUM corrupt 0x800F0900 servicing\packages\Package_3_for_KB905866~31bf3856ad364e35~x86~~6.0.27.2.mum

  (f) CBS MUM corrupt 0x800F0900 servicing\packages\Package_for_KB905866~31bf3856ad364e35~x86~~6.0.27.2.mum

  Checking package watchlist.

  Control of component watchlist.

  Verification of the packets.

  Control components store

  (f) clear CSI and S256H do not match WinSxS\Manifests\x86_b659c3950e197346f1b4cf8b4fc38b44_31bf3856ad364e35_6.0.6000.16808_none_d3574d740c0fd295.manifest x86_b659c3950e197346f1b4cf8b4fc38b44_31bf3856ad364e35_6.0.6000.16808_none_d3574d740c0fd295 0x00000000

  Summary:

  Seconds executed: 924

  Found 3 errors

  Manifest of the CSI and S256H don't do not Match Total Count: 1

  CBS MUM corrupt Total Count: 2

  Fantak,

  Please post your question here: http://social.microsoft.com/Forums/en-US/genuinevista/threads/

  Let the moderator forum know your file incompatibility problems. They could totally related to Vista Genuine Advantage possible.

  Thank you.

  Rick

• Impossible to update Windows - constant 8007000E error Code

  I run the Windows Update Troubleshooter several times. Whenever he reports registration for the Service is missing or corrupt - status: FIXED. But when I check the updates again, same error code.

  Use the following tutorial to reset Windows updates completely and check if it helps:

  Reset Windows updates

  Be sure to run the script as administrator.

• Impossible to update windows xp pro, error code 0 x 80070410

  Arghhh help, cannot update manually or automatic, after signing up to 100%, I get error 0x8007041D, tried everything, even microsoft fix, it's not even a net framework on this laptop from sony, after that my son has decided to clean all that I have is microsoft visual c ++ 2008 redistributable - x 86 9.0. 30729.4148 & running on xp pro sp3, even my cd / dvd is not working now, I did a restore of the system, but still nothing someone please help

  Hi rosiels13,

  In addition to questions of Jose, you can take a look at the article here with troubleshooting on your specific error.

  I hope this helps!

• Unable to update Windows Vista, Error code: 800B 001, "Windows has encountered an unknown error.

  Its been a while now that I can't download and update my Windows Vista Home Premium(64-bit), every time I click on install updates, it starts to download the updates, and when its done and the error occurs, code error: 800 B 001, "Windows has encountered an unknown error" and when when I try again... Error code: 80240016, "Windows update currently installed other updates. Please try again later in a few minutes. »
  I downloaded the update Windows Vista SP2 site Web Microsofts (Yes, im still in SP1), thinking it could slove the question, I can not install, when I clicked to install it, it says: "the form specified for the subject is not one supported or known by the specified trust provider."

  My Vista is genuine and activated, came with my laptop HP HDX16 1050EE.
  This issue has been hard for awhile and its a little boring.
  Thanks in advance.

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. (No, Symantec Support never say this.) See if the following solves your problems:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of the 2010 version of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

  8 test cycle.

  NB: Your Norton application can disable Windows Defender by default.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft