Impossible to update Windows XP

Recently installed XP home on an old copy of XP pro and I can not update at all.  I'm getting "site encountered a problem and cannot display the page."  Help?

Hello

Is there an error code and is it 0x8024400A? If not just not 0x8024400A reply to what it really is. If it's 0x8024400A...

Check your level of service current pack...

· Hold down the Windows (between Ctrl and Alt) key and press Pause break

· Examine what is listed in the system: section

If there is no designated service pack level, first you need to download SP2 from...

http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

.. .and then run the downloaded program to install SP2.

Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...

http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

For both of the above, you can ignore the text which says that it is for network installations and also ignore the text informing Windows/Microsoft Update If a single update of a PC.

So try and get up-to-date with the Windows updates.

Tricky

Tags: Windows

Similar Questions

  • My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

    My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

    Hi you can try the following...

    Click on Start >
    Type in CMD > 
    Right-click on the result, and then click on run as administrator >
    Then type sfc/scannow , and then press ENTER.
    Reboot your PC and try it a few times.

    Download and install the update tool of the system for Vista (Windows Update hotfix)
    "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

    Microsoft technical support suggestions:

    Configure the connection to obtain an IP address automatically

    1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
    2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
    4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
    5. Click on 'OK '.
    6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
    7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
    8. Click on 'OK '.
    9. Restart the computer.

  • Impossible to update windows vista sp2 error 0x0800f0900

    Been trying for days to update to windows vista Ultimate edition service Pack 1 to sp2, continue to receive an 0x0800f0900 error code. I tried several solutions but to no avail.

    CSI 00000161 [SR] cannot repair the military record [l:56 {28}] "InputPersonalization.exe.mui" Microsoft-Windows-Tablet PC - InputPersonalization.Resources, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2014-06-04 19:43:59, info CSI 00000163 [SR] cannot repair the military record [l:56 {28}] "InputPersonalization.exe.mui" Microsoft-Windows-Tablet PC - InputPersonalization.Resources, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    ' 2014-06-04 19:43:59, info CSI 00000164 [SR] this element is referenced by [l:184{92}]"Microsoft-Windows-TabletPC-OC-Package~31bf3856ad364e35~amd64~en-US~6.0.6000.16386.TabletPCOC. '
    2014-06-04 19:43:59, info CSI 00000167 [SR] could not reproject corrupted file [ml:520 {260}, l:120 {60}] '------? \C:\Program Files\Common Files\Microsoft Shared\Ink\en-US"\[l:56{28}]"InputPersonalization.exe.mui"; source file in the store is also corrupted

    000002db CSI [SR] cannot repair the military record [l:56 {28}] "InputPersonalization.exe.mui" Microsoft-Windows-Tablet PC - InputPersonalization.Resources, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2014-06-04 19:48:14, 000002dd CSI Info [SR] cannot repair the military record [l:56 {28}] "InputPersonalization.exe.mui" Microsoft-Windows-Tablet PC - InputPersonalization.Resources, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2014-06-04 19:48:14, 000002de CSI Info [SR] this element is referenced by [l:184{92}]"Microsoft-Windows-TabletPC-OC-Package~31bf3856ad364e35~amd64~en-US~6.0.6000.16386.TabletPCOC'
    2014-06-04 19:48:14, 000002e1 CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:120 {60}] '------? \C:\Program Files\Common Files\Microsoft Shared\Ink\en-US"\[l:56{28}]"InputPersonalization.exe.mui"; source file in the store is also corrupted
    2014-06-04 19:48:14, 000002e3 CSI Info [SR] repair complete
    2014-06-04 19:48:14, 000002e4 CSI Info [SR] validation transaction
    2014-06-04 19:48:14, CSI Info [SR] 000002e8 check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

    I have no idea what all these garbage means other what it won't allow me to update to SP2 on windows vista ultimate x 64.

    It came from my sfcscannow file, there was a lot more, but they have been repaired

    I had to reinstall my operating system, update IE to ie8 to ie7, now impossible to get sp2 installed

    HELP PLEASE

    Problem has been solved, tried to install a fix (unknown KB) which ran all night, but has not finished so I turned off the computer, which restarted then went through a chxdsc, found and repaired errors (again), rebooted, tried the update windows sp2 and it took, now the installation!

    Thanks for trying to help.

  • Impossible to update Windows on my new L750 Satellite

    Just bought a new L750 and when I try to update Windows I get the following message.

    An error occurred when the new updates for your computer

    Errors:
    Code800B0100 Windows Update encountered an unknown error.

    I use Windows 7 Home 32 bit, I tried to use all patches Windows so send me a few others found on various forums, including here.

    Any ideas?

    Brand new computer which does not have all the updates :(

    If everyone requires more operating information please just ask and I'm happy to provide

    Thanks in advance

    But out of curiosity do you use original OS preinstalled and you use Windows automatic update option?

    Generally avoid problems with Windows updates.

  • Impossible to update Windows 7; Service will not start, get "Access denied" error then message 0 x 80070005

    I can't start the Windows Update. I tried to start the service in the services menu. I received the "access denied" message then message 0 x 80070005.  have no idea what it is. The PC is a Dell desktop computer around the age of 4 months and no other problems. McAfee virus proctestion updates Windows 7 amd dual core, thin PC works well. Although I would really like to start my service. I checked the Dependices and are all in service and has begun.

    * Title *.
    I can't start windows updates. I go to the services section of my new pc Dell desktop windows 7 amd dual core. the__message says "access denied." message 0 x 80070005. I have NO idea what it is and now I can't update. The PC works well otherwise

    A trial free McAfee or Norton came pre-installed on your computer when you bought it?

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~

    There is a good chance that you see the effects of a hijackware infection!

    NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * and/or your subscription has expired since and/or machine is not been kept fully patched in Windows Update constantly, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

    Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
    https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

    Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

    Otherwise...

    1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

    NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

    2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

    2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

    3. now post the logs required in a forum appropriate for support by an expert in the field. DON'T SKIP THIS STEP!

    I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  • Impossible to update Windows, error 646

    I can't update Windows... I get a message that says 'code 646' error.  Can anyone help?

    I can't update Windows... I get a message that says 'code 646' error.  Can anyone help?

    Please use this tutorial:

    http://support.Microsoft.com/kb/2258121 Source:
    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

    Read the response provided by Bobby MI, moderator link above.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Impossible to update windows, dissapered BITS

    I have a Toshiba Satellite A-135. MY SOFTWARE IS WINDOWS VISTA HOME PREMEIUM. I WAS NOT ABLE TO UPDATE WINDOWS SINCE OCTOBER 2008. I GET AN ERROR 80246008 CODE. WHENEVER I SEE THIS ERROR CODE ME SAYS TO GO TO SERVICES AND SELECT BITS. WHEN I GO TO SERVICES, BIT WAS NOT FOUND. HELP HELP HELP!

    Hi Manfred13,

    Thanks for posting answers.microsoft.com

    I wanted to just check with you to see if this problem has been resolved.

    Here are some steps described in the following article if you need help.  http://support.Microsoft.com/kb/910337

    Verify that BITS is correctly configured verify that BITS is correctly configured. Then, try to start BITS. When you try to start BITS, you may receive one of several error messages. These error messages are listed in the section "troubleshooting steps. If you receive an error message when you try to start BITS, follow the steps in the section that corresponds to the error message that you receive.

    To verify that BITS is correctly configured and then start BITS, follow these steps:

    1. Click Start, click run, type services.msc and click OK.
    2. Double-click on Background Intelligent Transfer Service.
    3. In the Startup type box, click Manual, and then click apply.
    4. Click the connection tab and verify that the service is enabled in every hardware profile is listed. If the service is disabled in one or more hardware profiles, click the hardware profile, click Activateand then click apply.
    5. Click the general tab, and then click Start.

    If BITS starts successfully, visit the Windows Update Web site or the Microsoft Update Web site for updates. If you get the updates successfully, follow steps 1-3 again. However, in step 3, click Automatic rather than Manual.

    Please follow these steps and if it does not solve the iss, try more of that article listed above to see if there is no will.

    If no will, please publish it on us in this community forum for more suggestions.

    Kind regards

    Debbie
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Impossible to update Windows XP using Auto-Update

    None of the updates downloaded by the Auto-Updater Windows XP SP3 install.  If I check the installer actively (by clicking on the yellow "shield of exclamation point" icon), I am advised that

    "The component you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder containing the installation package "xxx.msi",

    where xxx is the name of the installer.  By clicking on 'Browse' and then clicking MSI file in the Directory gives an error, claiming that this package is not in the right directory.

    If enough interest if poster in this issue, I can post a screenshot.

    Thank you.

    Try to reset the windows update components.

    http://support.Microsoft.com/kb/971058

    Good luck.

  • Impossible to update windows xp, 0x80440A error code

    I could not update windows xp, 0x80440A error code

    0 x 80240036 and 0x8024400A

    You must be at Service Pack 3 level before you can use Windows updates.

    To determine which service pack is currently installed on your computer, follow these steps:

    1. Click Startand then click run.
    2. Copy and paste, or type the following command, and then click OK:

    winver

    A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

    See also: http://support.microsoft.com/kb/2497281
    You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

    If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
    (for single PCs too)

    For Windows XP Service Pack 2 installation procedure
    http://support.Microsoft.com/kb/875364

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

  • Impossible to update Windows - error Code 0 x 80070641

    original title: Windows Update not possible

    My computer runs windows 2003 Professional with Office 2003 is installed. For about a month now, could not update Windows or Office with the error code given in 0 x 80070641. Have checked the MS site and this code doesn't seem to be listed. Can anyone help?

    V.m. thanks for the help. Unfortunately, this does not work. Problem is related to the farmland automatic Windows that will not update automatically or manually.

    PirateBarnabas,

    I suggest you follow the steps in the link below and check if it helps:

    How to resolve problems connecting to Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/818018/en-us >

    05/01 / 1103:40: 36 pm

  • Impossible to update Windows Photo Gallery, when well even the update is set to automatic

    I went to see a few photos in an application in an email I sent and received the message from Windows Photo Gallery,... that 'library can't open this photo or video. This file format is not supported or you do not have the latest updates to the photo gallery.  I have my Windows Update to automatically install important updates and I check my updates manually every day when I get on the computer first.

    Assuming Vista SP2 is installed...

    You will find support for Windows Live Photo Gallery in this forum: http://windowslivehelp.com/forums.aspx?forumid=cafb0556-8959-49b9-afeb-635314aa02f3

    You can find support for the installation/uninstall/upgrade / update (Windows Live Essentials 2011 to the) in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  • Impossible to update Windows 7 error Code 0x80070005

    Hello. I've been having this problem for a few weeks, I have Windows 7 Ultimate on my laptop and suddenly Windows Update stopped application updates, the "loading bar" on the windows update window is never ending search for updates for my computer. Here are the solutions I've tried so far.

    1. Tools to reset the WU components (DLLs, services, etc.)

    2 - clear the Distribution of software on the Windows folder folder

    3 repair/reinstall Silverlight and .net Framework

    4 reinstall the updates with the off updater WSUS

    5 - Windows Update Readiness Tool (this huge package of ~ 550 MB)

    6 - easy Fix 50202, normal and aggressive ways.

    7. that batch file using the Subinacl tool I found on this site

    8 - Diagnosis of cab Windows Update.

    After all, that I left my computer for almost a day are never looking for updates, but it goes beyond the green bar and the search for message updates. The only clue I have at the moment is that error 0 x 80070005, which windows update diagnosis shows when he finished the analysis update of windows.

    I'm running out of ideas, and certainly, I don't want to reinstall Windows and my programs just for this issue. Is there anything else I could try?

    Please provide more information for your issue to be diagnosed.

    Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

    Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

    Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

    To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

    For assistance OneDrive see paragraph 9.3:

    http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

    General remarks on the event viewer:

    http://www.gerryscomputertips.co.UK/syserrors5.htm

    Notes on using Windows Update:

    http://www.gerryscomputertips.co.UK/WinUpdate1.htm

  • Impossible to update windows 8.1

    My pc is not updated to 8.1... of the store.

    How can I upgrade my pc to 8.1?

    Former title: 8.1 UPDATE

    Information about Windows 8.1

    1. Update to Windows 8.1 of Windows 8
      http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
    2. Upgrade to 8.1 Windows: FAQ
      http://Windows.Microsoft.com/en-AU/Windows-8/upgrade-to-Windows-8
      http://www.Microsoft.com/surface/en-AU/support/install-update-activate/updating-to-Windows-8-1
    3. Update Windows 8.1 Overview of Windows 8.1 (before January 2014)
      http://Windows.Microsoft.com/en-AU/Windows-8/update-from-preview
    4. Why I can't update in the store?
      http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store
    5. Update is available which prepares Windows RT and Windows 8 computers for Windows 8.1 update and Windows 8.1 RT
      http://support.Microsoft.com/kb/2871389
    6. Upgrade to Windows 8.1 fails and the system is restored to its previous state
      http://support.Microsoft.com/kb/2891300
    7. Something happened in the 8.1 Windows installation may not be completed.
      http://blogs.technet.com/b/ouc1too/archive/2013/10/25/something-happened-in-the-install-of-Windows-8-1-can-t-be-completed-and-now-you-re-annoyed.aspx
  • Impossible to update Windows 8.1 because the updates fail with error 0 x 80240004

    I am running Windows 8 Pro 32 bit without any problems and try to upgrade to Windows 8.1 without success.

    The upgrade does not appear in the MS Store on my system, I refreshed it as shown on one of the help pages.

    KB2885699 update (which should push update me) is not installed automatically when I download and try to install it I got error 0 x 80240004. I can't find any way to remedy this problem.

    Anyone has any ideas or am I stuck with the bog standard Windows 8 Pro that I use? I don't want to do a complete reinstall.

    Thanks in advance for your suggestions.

    Grant Dudley

    Original title: unable to update Windows 8.1

    Hello

    You need to run Windows Setup to get the opportunity to keep all...

    All my installs have either been done like that, or Setup bootable redirected by me to do this...

  • Impossible to update Windows 8 and can not download from the Store

    Hello

    I have Dell Inspiron 14z with Windows 8.
    I can't update Windows. When I press on install updates, it starts, but there are always 0% and 0 kB.
    Download of the store has the same problem.
    Thank you very much for the help.

    Hello

    Please try the Troubleshooting Windows App tool for question related apps:
    And try to reset the Windows Update components for attachment of update of related issues:
    Hope this helps, good luck :)
  • Impossible to update Windows 10 anniversary

    Hello

    I'm updating the partition Boot Camp on my Mac mini end of 2014. I use the Windows Upgrade Advisor 10. Everything seems to work ok but when the update is done and I start again under Win 10 I'm back to the previous version, 10240. I suspect it has to do with the graphics driver Intel 5100 Iris. I came across this problem with a previous update and managed to get through by removing the graphics driver Iris 5100.  This does not seem to solve the problem this time.

    Anyone got any ideas?

    It's the ISO 1607 available from Microsoft? If not, can you put the name of the file you are using?

Maybe you are looking for

  • Satellite L670 - Media Player can't read DVDs

    I got this Satellite L670 for a few weeks and this is the first time I tried to play the DVD on it. I get messages saying "media player cannot play the dvd because not possible to activate the analog copy on the output display protection." Try to ins

  • Laptop HP G42-303DX system restore error 0x800700B7

    I have a laptop HP, model G42-303DX, running Windows 7. When Windows tries to start, it displays the message: Windows Error Recovery / cannot start Windows. Then StartUpRepair launches and research about a minute for the problems.  Then it displays t

  • GPIB - Recovery timeout in the IBRD

    Hello Appellant to the IBRD of in a C++ program, I sometimes get an error in time-out (identified by checking which bits are defined in ibsta). Assuming that the only problem is that I have not put long time enough (ie the remote device will really a

  • HP elitebook 2540p - failed to get on the front office of the laptop freezes?

    I am trying to reset the Bios, HARD drive check, using the Windows startup options, but the laptop freezes as change personal settings. I spent C A D (just) before it slows down and then completely freezes. Clues please? OS is XP Pro.

  • Gel after the start and clicking on browser

    Recently, my computer hangs for a while after the start and clicking on my browser, why and what can be done?