Impossible to upgrade Vista, receive error 80072EFE

Similar Questions

• Why can not download PowerShell on my Vista, receive error messages: 80070020 and 80070490

  Windows keep bringing up for discussion download PowerShell 2 and I can not download. My computer shows 2 networks, but I don't have a laptop.

  Hello

  Follow the below mentioned articles and try to install Power Shell 2.0:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  Windows Update error 80070490

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070490

  I hope this helps!

• Vista - Code error: 80072EFE (cannot install updates)

  I have Windows Vista Business Service Pack 2 on a Lenovo T400s Intel Core 2 Duo P9600 @ 2.53 GHz.

  I found an answer that has recommended a boot Fixit and clean running. I did, try the options Standard and aggressive with Fixit. But I still get the same error message (80072EFE) whenever I try to receive updates. Thanks for any advice.

  I have Windows Vista Business Service Pack 2 on a Lenovo T400s Intel Core 2 Duo P9600 @ 2.53 GHz.

  I found an answer that has recommended a boot Fixit and clean running. I did, try the options Standard and aggressive with Fixit. But I still get the same error message (80072EFE) whenever I try to receive updates. Thanks for any advice.

  Continuous validations on code 80072EFE result has been associated with malicious software hidden.
  Strongly suggest that first determine you if these hidden malware residing on the system by running TDSSKiller.exe of Kaspersky .

  MowGreen Services update - consumer safety

• Windows Vista update error: 80072EFE

  What does this error mean?

  How should I do?

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  Service Pack 2 is installed? If it has been...

  How long this update problem occurred?

  What is the suite of security/antivirus installed and is a 3rd party firewall used?

  The current AV subscription and it detects malicious software the last time that the system has been analyzed?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941>

  In addition, give to think that you scan your computer with MalwareBytes'

  MalwareBytes Anti-Malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  07:12:1908/07/11

• Impossible to install Vista SP2 - error 800f0900

  I run the update package and invites me to accept the license. It fails then after about 10 seconds with this error. I tried several times to install the service pack, including the stand-alone version. Other updates were installed fine.  I've disabled my AV (norton) software and closed all programs. I have cleaned the update of Windows, as shown in the steps "General Windows Update troubleshooting" and still get this error. I searched high and low for articles related, and that this error pops up regularly in previous discussions. I ran many times analysis tool, including a new on the list updated as recently as yesterday and I still have this problem.

  The system is a Dell Studio 1737 with 2 x 320 GB drives. No further questions. Help!

  Great help, thanks.  In any case, I found a day 1 Norton Ghost backup on DVD from when the system was brand new. I restored all files in the directory windows\servicing\packages for patches of two problem (955839 and 853839) and catalogues of CSI corrupted in windows\winsxs\Catalogs\

  The response was so corrupted files and installed SP2.  I would have found it much more quickly if, when the tool DONE, he actually TOLD me to look in the newspaper! I had taken a correct end of the update TO mean that she couldn't find any problems.  Seriously, I would put that!

• Impossible to install the vista updates, receive error message: 80070641

  Original title: receive error code 80070641 in windows vista

  trying to install kb2596856 / kb2686827 / kb2656405 / kb2656368 / kb2687441

  This worked for me - method 3 in The Following Response.  Make sure that you back up the registry file before you start & create a Restore Point.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/window-installer-not-responding-error-641/a5ef9728-2bd6-48f2-8c03-3f85b5ecb7b0?page=2

• Impossible to install all windows vista dates received error 643

  A security update cumulative for Internet Explorer 9 for Windows Vista (KB2559049)

  Download size: 10.2 MB

  Security

  Update for Microsoft .NET Framework 2.0 SP2 under Windows Vista SP2 and Windows Server 2008 SP2 x 86 (KB2539633)

  Download size: 2.2 MB

  Security

  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2539636)

  Download size: 3.6 MB

  Security

  Update for Windows Vista (KB2536276)

  Download size: 292 KB

  Security

  Update for Windows Vista (KB2556532)

  Download size: 2.0 MB

  Security

  Update for Windows Vista (KB2563894)

  Download size: 489 KB

  Security

  Update for Windows Vista (KB2567680)

  Download size: 211 KB

  Update

  for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2468871)

  Download size: 19.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: recommended

  Install this update to resolve problems in Microsoft .NET Framework 4. For a complete list of issues included in this update, see the Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=210664

  Help

  and support:
  http://support.Microsoft.com

  Update

  for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2533523)

  Download size: 19.5 MB

  You may have to restart your computer for this update is taken into account.

  Update type: recommended

  This update addresses performance issues in Microsoft .NET Framework 4, reliability and stability. After you install this item, you may have to restart your computer.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=219466

  Help

  and support:
  http://support.Microsoft.com

  Update

  for Windows Vista (KB2563227)

  Download size: 113 KB

  Update

  Update Rollup for the ActiveX for Windows Vista (KB2562937) stop bits

  Download size: 39KO

  Hello

  Follow the step and check if that helps.

  Method 1: you receive error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install .NET Framework updates when you use Windows Update or Microsoft Updates

  http://support.Microsoft.com/kb/976982

  For other updates, follow these steps.

  Method 1: Put the computer in a clean boot State before updates

  Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: Temporarily disable any security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to perform the update of windows and try to install an update at a time

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  See also:

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100

  You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/2258121

  Try to download and install the update one manually.

  http://www.Microsoft.com/download/en/default.aspx

• SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

  SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-24 12:36

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1241
  Found 4 errors
  CBS MUM lack count: 4

  Unavailable repair files:
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

  Hello Yiratr,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  http://support.Microsoft.com/kb/956702

  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  "URGO".

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  Hi Barcini,

  ·        This error message do you receive when you try to install updates?

  ·        What updates are you inviting to install?

  You can run the Windows Update Troubleshooter & check if the problem persists.

  Open the Windows Update troubleshooting tool

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista error 80072efe installation code after fees

  I recently made a new installation of Vista, after getting a new hard drive, but I get the error 80072efe code from windows update. Any help would be appreciated gratefully.

  In addition to this question I can access the internet normally.
  The only change I made to the system had to change my MTU on the same setting that I used until I reinstalled Vista:
  netsh interface ipv4 set subinterface "Local network connection" mtu = 1400 store = persistent

  I tried running windows update every day for the past week and get similar behavior.
  I have deleted the partition and resinstalled Vista 4 times and tried to update before installing windows and programs and get similar behavior.
  I reset my router.
  I added the update URL as trusted sites.

  Here is my \SoftwareDistribution\ReportingEvents.txt:

  19:43:29:278 2009-07-15 + 0100 1 162 101 {B890A5BC-7090-4E80-9080-CA9C8EABE77D} {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 0 SelfUpdate success content download download succeeded.
  19:43:29:293 2009-07-15 + 0100 1 201 101 {831ECA2E-C602-4E20-8111-ABC60A6A2F78} {E2FF4526-97D7-4926-8E75-295DBA39C6BF} 1 0 content SelfUpdate success install Installation pending.
  19:44:18:789 2009-07-15 + 0100 1 190 101 {7D884B48-E10D-4053-B7F7-B5E53464FC90} {174EAAC7-5A3D-448F-BE6F-D6FE450E1DCF} 1 0 SelfUpdate success content install Installation successful: Windows successfully installed the following update: ActiveX in Windows Update
  19:44:18:789 2009-07-15 + 0100 1 190 101 {57CA28FC-7B35-462A-BE1D-C23162B65603} {E2FF4526-97D7-4926-8E75-295DBA39C6BF} 1 0 SelfUpdate success content install Installation successful: Windows successfully installed the following update: Windows Update central
  19:53:01:295 2009-07-15 {61F3F1E3-F505-4735-A8A1-D9755CD91D69} + 0100 1 199 101 {0011B9ED-9189-4D58-BE25-FA2F13FC3D6C} 240005 1 SelfUpdate success content install Installation successful and restart required for the next update: Windows Update to the
  20:21:08:891 2009-07-15 + 0100 1 148 101 {58EE1890-78ED-49E7-8E8C-7FD3EE5BF283} {00000000-0000-0000-0000-000000000000} 0 8024400 has AutomaticUpdates failure timing Windows Update Client software has not detected with 0x8024400a error.
  21:01:44:858 2009-07-15 + 0100 1 148 101 {24C2DE68-6592-4F99-B6C8-D2A68D9DE9B2} {00000000-0000-0000-0000-000000000000} 0 80072efe AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072efe.
  21:41:22:619 2009-07-15 + 0100 1 202 102 {5D20DDCD-5C7B-4A8F-A542-3174A3E1D06E} {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates content success installation reboot completed.
  07:28:31:408 2009-07-16 + 0100 1 147 101 {BDEBF831-DB6D-4731-ADDA-B3418A6DDB61} {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates success software sync Windows Update Client detected 0 updates successfully.
  07:26:10:456 2009-07-17 + 0100 1 148 101 {D50A1202-0F21-486B-8E18-6761C5D0D12B} {00000000-0000-0000-0000-000000000000} 0 80072efe AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072efe.
  17:44:30:530 2009-07-17 + 0100 1 148 101 {A1AAD90E-D79C-4E2C-AB89-EBBA63693EA0} {00000000-0000-0000-0000-000000000000} 0 8024400 has AutomaticUpdates failure timing Windows Update Client software has not detected with 0x8024400a error.
  17:46:03:686 2009-07-17 + 0100 1 148 101 {32107CB6-6283-4DE9-8A86-06CC53875BA0} {00000000-0000-0000-0000-000000000000} 0 80072efe software failure synchronization Client Windows Update did not detect with error 0x80072efe.
  18:00:32:602 2009-07-17 + 0100 1 148 101 {41EA94B1-25FC-4C28-BC87-191FBBEDC8ED} {00000000-0000-0000-0000-000000000000} 0 80072efe AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072efe.
  08:51:24:405 2009-07-18 + 0100 1 148 101 {BC49C273-7CE5-4B93-97A8-8BA942F46DC3} {00000000-0000-0000-0000-000000000000} 0 80072efe AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072efe.

  I changed my router to my old USB modem and now I can see Windows updates.
  I'll try to reset or flashing of my router and see if it works.

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020

  Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020.

  KB2633952 is an option, not the security update. Feel free to hide it - especially if you do not live in Kaliningrad, Minsk (Belarus), Bahia (Brazil) or Fiji.

• Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  80070490 = permission denied / [a problem initializing or using session variables] or item not found

  80070643 = ERROR_INSTALL_FAILURE

  http://support.Microsoft.com/kb/958044

• "Unable to upgrade to Vista XP, error" unable to load manifest to C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man.

  Original title: manifest errors in the log file of the installation after the upgrade to Windows XP Pro SP3 for Windows Vista Ultimate

  I was looking for an answer to the following problem.   I tried to move from XP to Vista a few months ago, without success.   I thouhgt it might be a compatibility problem with my old ASUS motherboard, so I tried all of the suggestions. down to 2 GB of RAM to 3 GB, to remove all the necessary equipment before the upgrade, disable unnecessary hardware support in the BIOS, etc..

  I just bought a new ASUS motherboard with their 890 chipset.   I tried the upgrade again, same thing: the upgrade runs without error, then starts at the restart to complete the installation.   He gets the Green and white Microsoft amimation loading and goes no further.

  After reading a few peosts in this forum, I found my upgrade/install error logfile.   I found the following few lines below:

  2010-10-11 12:14:34, error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate-> LoadDllServer (C:\$, WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3}, 0) failed, hr = [0x8007007f].
  2010-10-11 12:14:34, error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW (C:\$ WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH) could not rule = 0x7f. [gle = 0x0000007f]
  2010-10-11 12:14:34, error [0 x 080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr = 0x8007007f. [gle = 0x0000007f]
  2010-10-11 12:14:34, error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate-> LoadDllServer (C:\$, WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3}, 0) failed, hr = [0x8007007f].
  2010-10-11 12:14:49, [0x08071d] MIG CDownlevelOCStore::GetOCCollection error, failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man. : Class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
  void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

  2010-10-11 12:14:52, error [0x08081e] MIG could not load manifest to C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
  void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

  I guess he can't find a certain file he wants so that the upgrade can complete.

  Scientists here know what I need to change?

  Thank you.

  Hi Mike J2
   
  1. are you able to boot on Windows xp?

  Step 1:
   

  If you can start Windows xp, then I suggest you run Vista upgrade Adviser and check for the report.
  You can also run the updates of windows on your computer and try to install all the updates on your computer and check.
  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/WindowsXP.mspx
   
  Step 2:
  
  Reference:
   
  This old PC
  http://Windows.Microsoft.com/en-us/Windows-Vista/this-old-PC-Windows-Vista-is-here-is-it-time-to-upgrade-your-hardware
   
  You can also check this below article provided Windows help to upgrade Windows XP to Windows Vista.
   
  You can also check:
   
  Upgrade Windows XP to Windows Vista
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/upgrading-from-Windows-XP-to-Windows-Vista

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• He cannot get set Windows Update to download. Receive error code 80072EFE?

  Original title: Carol

  He cannot get set Windows Update to download. Receive error code 80072EFE.

  https://support.Microsoft.com/en-AU/KB/818018/en-AU how to troubleshoot problems connecting to Windows Update or Microsoft Update

  Do not trust article on the fixit.