Impossible to use ad groups for authentication RADIUS on ISE 2.0

I tried following the guide on how to configure ISE 2.0 for peripheral administration GANYMEDE and when I get to the ensembles 'political device admin' the only thing that I can use identiity default user groups there.  It won't let me choose an ad group.  Even if I create a group of identity I'm unable to map a group of ads to it.  Am I missing something here?

Make sure that you use the box of 3 (left to right) when your state of construction based on ad groups. The 2nd box only searches the internal identity store. Then you will need to click on the 3rd box > create new Condition > Select attribute > AD1 (or whatever you named your connection AD) > external groups

I hope this helps!

Thank you for evaluating useful messages!

Tags: Cisco Security

Similar Questions

  • Authentication RADIUS with ISE - a wrong IP address

    Hello

    We use ISE for radius authentication.  I have setup a new Cisco switch stack to one of our branches and set up the device network in ISE.  Unfortunately, in trying to authenticate, ISE logs show a lack of "Impossible to locate device network or Client AAA" the reason for this failure is that the log shows that it comes from a bad IP address.  The IP address of the switch is 10.xxx.aaa.241, but the logs show that it is 10.xxx.aaa.243.  I removed and added the configs of RADIUS on ISE and the switch, but it is always so que.243.  There is another switch battery location (same model, IOS etc), which works correctly.

    The config of RADIUS on the switch:

    AAA new-model
    !
    !
    AAA authentication login default local
    AAA authentication login Comm group local RADIUS
    the AAA authentication enable default
    RADIUS group AAA authorization exec default authenticated if

    radius of the IP source-interface Vlanyy
    10.xxx.yyy.zzz RADIUS server
    10.xxx.yyy.zzz auth-port 1812 acct-port 1813 ipv4 address
    abcdefg 7 key

    The journal of ISE:

    Overview
    5405 RAY lost event
    Username
    ID of the endpoint
    Profile of endpoint
    The authorization profile

    Details of authentication
    Source Timestamp 2014-07-30 08:48:51.923
    Receipt 08:48:51.923 Timestamp 2014-07-30
    Policy Server ise
    5405 RAY lost event
    11007 failure reason could not locate device network or Client AAA
    Resolution check if the device network or AAA client is configured in: Administration > network resources > network devices
    Root cause could not find the network device or the AAA Client while accessing NAS by IP during authentication.
    Username
    Type of user
    ID of the endpoint
    Profile of endpoint
    IP address
    Identity store
    Membership group
    ID of Session verification
    Authentication method
    Authentication Protocol
    Type of service
    Network device
    Type of device
    Location
    10.xxx.AAA.243 address IP NAS
    ID of Port NAS tty2
    Virtual NAS Port Type
    The authorization profile
    Status of the posture
    Security group
    Response time

    Other attributes
    ConfigVersionId 107
    Device port 1645
    DestinationPort 1812
    Radius protocol
    NAS-Port 2
    AcsSessionID ise1/186896437/1172639
    IP address of the device 10.xxx.aaa.243
    CiscoAVPair

    Measures
    Request for access received RADIUS 11001
    11017 RADIUS creates a new session
    11007 could locate no device network or Client AAA
    5405

    As a test, I set up a device that uses the adresse.243.  While ISE claims that it authenticates, it really doesn't.  I have to use my local account to access the device.

    Any advice on how to solve this problem would be appreciated.  Please let me know if you need more information.

    Beth

    Remove your (RADIUS-server host 10.x.x.x... ect) tele-health and try this command and see if the problem goes away. The new section is the non-standard expression allows to see if that helps.

    RADIUS-server host non-standard key of acct-port of the auth-port 1645 10.xxx.xxx.xxx 1646 *.

  • Impossible to use the demand for green products

    I'm unable to use environmentally friendly products.

    I have .net installed 4.5.2, 32-bit win 7.

    See the end of this message for details on the call
    just-in-time (JIT) debugging instead of this dialog box.

    The exception text *.
    System.Runtime.InteropServices.COMException (0 x 80040154): class not registered (Exception from HRESULT: 0 x 80040154 (REGDB_E_CLASSNOTREG))
    at System.Windows.Forms.UnsafeNativeMethods.CoCreateInstance (Guid & clsid, object punkOuter, Int32 context, Guid & iid)
    at System.Windows.Forms.AxHost.CreateWithoutLicense (Guid clsid)
    at System.Windows.Forms.AxHost.CreateWithLicense (String drive, Guid clsid)
    at System.Windows.Forms.AxHost.CreateInstanceCore (Guid clsid)
    at System.Windows.Forms.AxHost.CreateInstance)
    at System.Windows.Forms.AxHost.GetOcxCreate)
    at System.Windows.Forms.AxHost.TransitionUpTo (Int32 State)
    at System.Windows.Forms.AxHost.CreateHandle)
    at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
    at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
    at System.Windows.Forms.AxHost.EndInit)
    at eFPS.frm_FPVerify_RCMember_Secugen.InitializeComponent)
    to eFPS.frm_FPVerify_RCMember_Secugen... ctor()
    at eFPS.frm_eFPSVerification_FlowManager.OpenGUIAccordingToVerificationType)
    at eFPS.frm_eFPSVerification_FlowManager.btnBiometricBased_Click (Object sender, EventArgs e)
    at System.Windows.Forms.Control.OnClick (EventArgs e)
    at System.Windows.Forms.Button.OnClick (EventArgs e)
    at System.Windows.Forms.Button.OnMouseUp (MouseEventArgs mevent)
    at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
    at System.Windows.Forms.Control.WndProc (Message & m)
    at System.Windows.Forms.ButtonBase.WndProc (Message & m)
    at System.Windows.Forms.Button.WndProc (Message & m)
    at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
    at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
    at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

    Loading assemblies *.
    mscorlib
    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    ----------------------------------------
    Green products
    Assembly version: 1.0.0.0
    Win32 Version: 1.0.0.0
    Code: file:///C:/Users/Kapil/AppData/Local/Apps/2.0/4APZHBC0.KC4/6QW51MGY.7KQ/efps..tion_e83cab0c1b326129_0002.0000_fa1360af4bdfc979/eFPS.exe
    ----------------------------------------
    Microsoft.VisualBasic
    Assembly version: 8.0.0.0
    Win32 Version: 8.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
    ----------------------------------------
    System
    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    ----------------------------------------
    System.Windows.Forms
    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    ----------------------------------------
    System.Drawing
    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    ----------------------------------------
    eFPS.EntityFramework
    Assembly version: 1.0.0.0
    Win32 Version: 1.0.0.0
    Code: file:///C:/Users/Kapil/AppData/Local/Apps/2.0/4APZHBC0.KC4/6QW51MGY.7KQ/efps..tion_e83cab0c1b326129_0002.0000_fa1360af4bdfc979/eFPS.EntityFramework.DLL
    ----------------------------------------
    System.Data


    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
    ----------------------------------------
    System.Xml
    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    ----------------------------------------
    System.Configuration
    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    ----------------------------------------
    System.Runtime.Remoting
    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
    ----------------------------------------
    eFPS.BuisnessLogicFramework
    Assembly version: 1.0.0.0
    Win32 Version: 1.0.0.0
    Code: file:///C:/Users/Kapil/AppData/Local/Apps/2.0/4APZHBC0.KC4/6QW51MGY.7KQ/efps..tion_e83cab0c1b326129_0002.0000_fa1360af4bdfc979/eFPS.BuisnessLogicFramework.DLL
    ----------------------------------------
    eFPS.Interfaces
    Assembly version: 1.0.0.0
    Win32 Version: 1.0.0.0
    Code: file:///C:/Users/Kapil/AppData/Local/Apps/2.0/4APZHBC0.KC4/6QW51MGY.7KQ/efps..tion_e83cab0c1b326129_0002.0000_fa1360af4bdfc979/eFPS.Interfaces.DLL
    ----------------------------------------
    eFPS.DataAccessFramework
    Assembly version: 1.0.0.0
    Win32 Version: 1.0.0.0
    Code: file:///C:/Users/Kapil/AppData/Local/Apps/2.0/4APZHBC0.KC4/6QW51MGY.7KQ/efps..tion_e83cab0c1b326129_0002.0000_fa1360af4bdfc979/eFPS.DataAccessFramework.DLL
    ----------------------------------------
    System.ServiceModel
    Assembly version: 3.0.0.0
    Win32 Version: 3.0.4506.4926 (NetFXw7.030729 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.ServiceModel/3.0.0.0__b77a5c561934e089/System.ServiceModel.dll
    ----------------------------------------
    NicSecurity
    Assembly version: 1.0.0.0
    Win32 Version: 1.0.0.0
    Code: file:///C:/Users/Kapil/AppData/Local/Apps/2.0/4APZHBC0.KC4/6QW51MGY.7KQ/efps..tion_e83cab0c1b326129_0002.0000_fa1360af4bdfc979/NicSecurity.DLL
    ----------------------------------------
    SMDiagnostics
    Assembly version: 3.0.0.0
    Win32 Version: 3.0.4506.4926 (NetFXw7.030729 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/SMDiagnostics/3.0.0.0__b77a5c561934e089/SMDiagnostics.dll
    ----------------------------------------
    System.Web
    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
    ----------------------------------------
    System.WorkflowServices
    Assembly version: 3.5.0.0
    Win32 version: 3.5.594.4926
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.WorkflowServices/3.5.0.0__31bf3856ad364e35/System.WorkflowServices.dll
    ----------------------------------------
    System.ServiceModel.Web
    Assembly version: 3.5.0.0
    Win32 version: 3.5.594.4926
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.ServiceModel.Web/3.5.0.0__31bf3856ad364e35/System.ServiceModel.Web.dll
    ----------------------------------------
    System.Runtime.Serialization
    Assembly version: 3.0.0.0
    Win32 Version: 3.0.4506.4926 (NetFXw7.030729 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Serialization/3.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
    ----------------------------------------
    System.IdentityModel
    Assembly version: 3.0.0.0
    Win32 Version: 3.0.4506.4926 (NetFXw7.030729 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.IdentityModel/3.0.0.0__b77a5c561934e089/System.IdentityModel.dll
    ----------------------------------------
    System.Core
    Assembly version: 3.5.0.0
    Win32 Version: 3.5.30729.4926 built by: NetFXw7
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
    ----------------------------------------
    System.Deployment
    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.Deployment/2.0.0.0__b03f5f7f11d50a3a/System.Deployment.dll
    ----------------------------------------
    Accessibility
    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
    ----------------------------------------
    System.Web.Services
    Assembly version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
    ----------------------------------------
    System.IdentityModel.Selectors
    Assembly version: 3.0.0.0
    Win32 version: 3.0.4506.4926
    Code: file:///C:/Windows/assembly/GAC_MSIL/System.IdentityModel.Selectors/3.0.0.0__b77a5c561934e089/System.IdentityModel.Selectors.dll
    ----------------------------------------
    AxInterop.SGFPLIBXLib
    Assembly version: 2.1.0.0
    Win32 version: 2.1.0.0
    Code: file:///C:/Users/Kapil/AppData/Local/Apps/2.0/4APZHBC0.KC4/6QW51MGY.7KQ/efps..tion_e83cab0c1b326129_0002.0000_fa1360af4bdfc979/AxInterop.SGFPLIBXLib.DLL
    ----------------------------------------

    JIT debugging *.
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    permit.

    For example:


       

    When JIT debugging is enabled, an unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.

    How can I solve it?

    Hello

    Thanks for posting your query on the Microsoft Community.

    I suggest you re-post your query on The MSDN Forums , because we have experts working on this type of questions and for you help the better.

    Check out the link:

    https://social.msdn.Microsoft.com/forums/en-us/home

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • NPS Windows Help for authentication of aaa for Cisco router - is it safe?

    I am very confused about how all this works and was hoping someone could help me.

    I followed a bunch of tutorials online for authentication RADIUS of installation on a Cisco router and he did to a NPS Windows Server. Now I can ssh into the router my AD account.

    Now that I got it to work, I go to the settings to make sure everything is secure.

    On my router, the config is pretty simple:

    aaa new-modelaaa group server radius WINDOWS_NPSserver-private 123.123.123.123 auth-port 1812 acct-port 1813 key mykeyaaa authentication login default local group WINDOWS_NPS
    
    ip domain-name MyDomcrypto key generate rsa
    
    (under vty and console)# login authentication default
    On the NPS Windows:
    • I created a new RADIUS client for the router.
    • Created a secret shared and specified Cisco as the name of the seller.
    • Created a new strategy of network with my desired conditions.
    • And now the frame of the configuration of the network policy that worries me:
    
    
    So initially I thought my AD credentials were being sent over the wire in plain text, but I did a capture and saw this:
    
    
    
    How is my password being encrypted and how strong is the encryption?
    
    Another thing is how can I configure aaa authentication with mschapv2? The documentation I saw for mschapv2 uses the "ppp authentication ms-chap-v2" command, but I'm not using ppp I'm using aaa with a radius server.
     
    

    Hello

    RADIUS encrypts the password, but sends the username in clear. GANYMEDE encrypts the user name and password.

    You can find the encryption used by RADIUS in the RFC scheme:

    https://Tools.ietf.org/html/rfc2865#page-27

    MS-Chap-V2 is used for the authentication of users such as the remote access and vpn, not management switch

    Thank you

    John

  • Problem setting 7606 router for authentication GANYMEDE +.

    Hello community support.

    I have two routers Cisco 7606 I tried in vain to have users authenticated using servers GANYMEDE +. As noted below, I have two servers (1.1.1.1 and 2.2.2.2) accessible via vrf OAM which is accessible from desktop to ssh login. The real IPS and FFS have been changed because it's a router of the company.

    I use two servers to authenticate on a lot other devices Cisco network that they work properly.

    I can reach the vrf servers and the source in use interface. I can also port telnet 49 if the source interface servers and the vrf.

    The server key is hidden, but at the time of configuration, I can see that it is correct.

    The problem is that after confuring for authentication RADIUS, the router always uses the password to enable instead of GANYMEDE. While debug output shows "incorrect password", why not the router authenticates using GANYMEDE? Why is he using the enable password?

    Please review the outputs below and help point out what I may need to change.

    PS: I have tried many other combinations, including obsolete without success, including the method proposed in this page.

    http://www.Cisco.com/en/us/docs/iOS/sec_user_services/configuration/guide/sec_vrf_tacas_svrs.html

    Please help I'm stuck.

    ROUTER #sh running-config | s aaa

    AAA new-model

    AAA server Ganymede group + admin

    Server name admin

    Server name admin1

    IP vrf forwarding OAM

    Ganymede IP interface-source GigabitEthernet1

    AAA authentication login admin group Ganymede + local activate

    AAA - the id of the joint session

    ROUTER #sh running-config | dry Ganymede

    AAA server Ganymede group + admin

    Server name admin

    Server name admin1

    IP vrf forwarding OAM

    Ganymede IP interface-source GigabitEthernet1

    AAA authentication login admin group Ganymede + local activate

    GANYMEDE Server Admin

    1.1.1.1 ipv4 address

    button 7 XXXXXXXXXXXXXXXXXXXX

    GANYMEDE Server admin1

    2.2.2.2 ipv4 address

    button 7 XXXXXXXXXXXXXXXXxxxx

    line vty 0 4

    authentication admin login

    ROUTER #sh Ganymede

    GANYMEDE + - public server:

    Server name: admin

    Server address: 1.1.1.1

    Server port: 49

    Opening of socket: 15

    Firm grip: 15

    Write-offs of socket: 0

    Socket errors: 0

    Socket timeouts: 0

    Failed connection attempts: 0

    Total packets sent: 0

    Recv packets total: 0

    GANYMEDE + - public server:

    Server name: admin1

    Server address: 2.2.2.2

    Server port: 49

    Opening of socket: 15

    Firm grip: 15

    Write-offs of socket: 0

    Socket errors: 0

    Socket timeouts: 0

    Failed connection attempts: 0

    Total packets sent: 0

    Recv packets total: 0

    Oct 22 12:38:57.587: AAA/BIND(0000001A): link i / f

    22 Oct 12:38:57.587: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

    Oct 22 12:38:57.587: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:38:57.587: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

    Oct 22 12:39:02.327: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:02.327: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

    22 Oct 12:39:04.335: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

    Oct 22 12:39:04.335: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:04.335: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

    Oct 22 12:39:08.675: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:08.675: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

    22 Oct 12:39:10.679: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

    Oct 22 12:39:10.683: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:10.683: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

    Oct 22 12:39:14.907: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:14.907: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

    ROUTER #sh worm

    Cisco IOS software, software of c7600rsp72043_rp (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1 (3) S3, RELEASE SOFTWARE (fc1)

    Technical support: http://www.cisco.com/techsupport

    Copyright (c) 1986-2012 by Cisco Systems, Inc.

    Updated Saturday, March 30, 12 08:34 by prod_rel_team

    ROM: System Bootstrap, Version 12.2 SRE (33r), RELEASE SOFTWARE (fc1)

    BOOTLDR: Cisco IOS software, software c7600rsp72043_rp (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1 (3) S3, RELEASE SOFTWARE (fc1)

    The availability of ROUTER is 7 weeks, 5 days, 16 hours, 48 minutes

    Availability for this control processor is 7 weeks, 5 days, 16 hours, 49 minutes

    System returned to ROM by reload (SP by charging)

    System restarted at 20:00:59 UTC Wednesday, August 28, 2013

    System image file is "sup - bootdisk:c7600rsp72043 - advipservicesk9 - mz.151 - 3.S3.bin.

    Last reload type: normal charging

    Reload last reason: power

    This product contains cryptographic features and is under the United States

    States and local laws governing the import, export, transfer and

    use. Delivery of Cisco cryptographic products does not imply

    third party approval to import, export, distribute or use encryption.

    Importers, exporters, distributors and users are responsible for

    compliance with U.S. laws and local countries. By using this product you

    agree to comply with the regulations and laws in force. If you are unable

    to satisfy the United States and local laws, return the product.

    A summary of U.S. laws governing Cisco cryptographic products to:

    http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

    If you need assistance please contact us by mail at

    [email protected] / * /.

    Processor CISCO7606 - S (M8500) Cisco (revision 1.1) with 3670016 K/K 262144 bytes of memory.

    Card processor ID FOX1623G61B

    PLINTH: RSP720

    CPU: MPC8548_E, Version: 2.1 (0 x 80390021)

    KERNEL: E500, Version: 2.2, (0 x 80210022)

    CPU:1200 MHz, CCB:400 MHz, DDR:200 MHz,

    L1: D-cache 32 KB active

    I'm hiding active 32 KB

    Last reset of tension

    3 virtual Ethernet interfaces

    76 of the gigabit Ethernet interfaces

    8 ten interfaces Ethernet Gigabit

    3964K bytes of non-volatile configuration memory.

    500472K bytes of the map of PCMCIA ATA internal (512 bytes sector size).

    Configuration register is 0 x 2102

    To resolve this problem. Please replace the below listed order

    AAA authentication login admin group Ganymede + local activate

    with;

    Enable AAA authentication login default local admin group

    You have set the group name server as a list of methods and instead use admin as a group of servers, you used Ganymede +.

    Note: Please ensure that you have local users and enable the password configured in the case of Ganymede inaccessible server.

    ~ BR
    Jatin kone

    * Does the rate of useful messages *.

  • undo the groups for changes in the user interface

    Hello guys,.

    Is it possible to use groups of cancellation to make the changes that the user creates in Panel by me?

    Let's suppose I have create a window Panel / were the user can fill some EditText, select the items in a TreeView, etc.. Is it possible that I can use cancel groups for this change?

    Thank you

    Francine

    ScriptUI does not provide this feature natively.

    But you can add several addEventListener() and write all changes to recover, then file txt them.

  • Commissioning of Applications using security groups - by application, or several apps by group?

    I was curious how most was assigning applications.  Would you recommend the creation of a group by the application or by using a group for several applications.  The reason that I ask is that we have a group called "Basic Thinapp" which includes standard applications for all users, such as adobe reader, mozilla, flash, quicktime and some others so that all members of Thinapp Base gets our basic fixed package of applications.

    The problem is that we want to install adobe reader locally on our virtual desktops because of the slow launch time and unable to show online them PDFs with IE.  We use thinreg so when Adobe Reader icon is removed from the directory of our icon and when they the logoff and log back in, Adobe leaves behind a non-working icon that useless and users would have to remove it manually if they wanted to get rid of it.  This does not seem the best approach.

    I know that the best way to remove the app is to remove the users outside the group, ask them to logoff and log in again for the app to disappear.  However, users would lose all basic applications.  We could then put back them in the Group and forced to logoff and log back in again and they would get the base once again.  That seems a lot to ask of users.

    Creating a group by application seems to be more directors as well as all users will need to be placed in each groups.

    Is there a better way to do this?

    We mainly use the Application - approach of a group, but have a few groups with multiple applications.

    With your case, I would do the following:

    1. create a new group and put there also: all users in your group of basic thinapp

    2 rebuild the thinapp adobe so that it uses this group

    3. After all users have logged off at least once from step 2, replace your thinapp with the newly rebuilt thinapp

    4. now, the Adobe Reader software works on his own group, you can delete users from this group, and after their next log off / log icon should disappear, because they are no longer allowed.

    The only problem is that you need the thinapp riffle proberly file, so the thinapp must be in the file system until all users are connected at least once. And with the local profiles, connected only once on each computer with a profile of them.

    Andreas

  • How Anyconnect VPN users will connect with cisco ASA, which uses the server (domain controller) Radius for authentication

    Hi team

    Hope you do well. !!!

    currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.

    1 users will connect: user advanced browser on SSL VPN pop past username and password.

    2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.

    3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.

    4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.

    This is my requirement, so someone please guide me how to set up step by step.

    1. how to set up the Radius Server?

    2. how to configure CISCO ASA?

    Thanks in advance.

    Hey Chick,

    Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.

    http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...

    Hope this helps

    Knockaert

  • ACS Auth: Use of group data for the authentication of the user-> security problem?

    IM only using a VPN-installation (router, ACS, Cisco VPN Client) and I noticed that the name of the Group and the Group decrypted password can also be used in the second step of the authentication (the extent of authentication or authentication of users), which is a big security concern. What wrong with my setup.

    For the test I have set up a VPN configuration as described in cisco documents. Here, it also works. The identification information of the Working Group in the authentication of the user, too, which is quite logical, because the group credentials are also a user in the database of GBA. Of course, this user can be authenticated in the user authentication process.

    Who is wrong? How other admins to solve this problem? Am I wrong in my approach?

    Thank you!

    Yes, permission will have password for "cisco", at least for isakmp and pki. The group will send its name and password Cisco to receive the av pairs (ASA has a function to create a "good word of different past" but he's not here on IOS, AFAIR)

    It is a restriction known - you should not use the same server for authentication and authorization, with IOS and ASA.

    Did you give this property (either / or):

    -local isakmp authorization

    -l' authentication certificate (Group)

    -sharing features for authentication and authorization between servers.

    I don't think we can do much wise configuration to prohibit this behavior.

    Edit: spelling correction.

  • Authentication RADIUS on NX - OS (6.2) using MS NPS

    Hi guys,.

    I'm having a RADIUS configuration of wireless authentication trouble on NX-OS using Microsoft NPS.

    The error message that I am on the NPS server is:

     A RADIUS message was received from RADIUS client (10.10.10.2) with an invalid authenticator. This is typically caused by mismatched shared secrets. Verify the configuration of the shared secret for the RADIUS client in the Network Policy Server snap-in and the configuration of the network access server. 

    Nexus device, I learned that the recorded message:

     2015 Aug 9 07:49:47.595 switch1 %RADIUS-3-RADIUS_ERROR_MESSAGE: RADIUS server 172.16.88.166 failed to respond even after all retries 2015 Aug 9 07:49:47.595 switch1 %RADIUS-3-RADIUS_ERROR_MESSAGE: All RADIUS servers failed to respond after retries. 2015 Aug 9 07:52:00.234 switch1 %RADIUS-3-RADIUS_ERROR_MESSAGE: packet from RADIUS server 172.16.88.166 fails verification: The shared secret is probably incorrect.

    Although the reason for the failure is obvious, I am 100% sure that the shared secret is correct. I also tried to change about 5 times, but the result was the same...

    That's what I configured on NX

     aaa authentication login default group radius aaa authentication login invalid-username-log aaa authentication login error-enable radius-server timeout 5 radius-server retransmit 1 radius-server deadtime 0 radius-server host 172.16.88.166 key 7 "xxxxxxxxxx" auth-port 1645 acct-port 1646 authentication aaa group server radius radius server 172.16.88.166 deadtime 0 use-vrf management source-interface mgmt0 ip radius source-interface mgmt0

    One out more troubleshooting

     # show radius-server statistics 172.16.88.166 Server is not monitored Authentication Statistics failed transactions: 4 sucessfull transactions: 0 requests sent: 4 requests timed out: 0 responses with no matching requests: 0 responses not processed: 4 responses containing errors: 0

    I also configured the ASB for NX-OS on the network POLICY Server (shell: roles * "network-admin vdc-admin"), but I don't think he's going even at this stage (as it says the RADIUS server is a failure, not the user/references).

    All thoughts are more than welcome!

    Hello

    It is indeed a problem with the shared secret key. Try using a simple shared secret key (alphanumeric) and for Nexus while configuring a shared secret key, use key 0 to instead of the 7 button when entering the shared secret key.

    Link OS automatically convert the plain text in encrypted key (type 7) key.

    Concerning

    Poonam Garg

  • Cisco Nexus to use authentication Radius AAA using Microsoft 2008 NPS

    I have a Nexus 7010 running

    I was wondering if you can help me with something. I'm having a problem with the approval of the order through our aaa config. We have not an authentication problem of command approval that does not work. From what I've seen and read Nexus NX - OS 6.x has not all orders for the aaa authorization, unless you configure GANYMEDE +. My basic config is below if you can help would be much appreciated.

    > ip source interface mgmt radius 0

    > key RADIUS-server XXXXX

    > host X.X.X.X key radius server authentication XXXXX accountant

    > RADIUS-server host X.X.X.X XXXXX key authentication accountant aaa

    > authentication login default group aaa authentication Radius_Group

    > RADIUS server logon group console local aaa Radius_Group

    > server X.X.X.X

    > server X.X.X.X

    > mgmt0 interface-source

    Also nobody how to configure Microsoft 2008 NPS as Raduis server to work with Nexus? I read a few post that suggests to change the

    Shell: roles = "vdc-admin" in the value field of the attribute in the RADIUS server

    Anyone know if it works?

    Thank you

    I haven't used NPS before but sounds like you are on the right track. As Ed mentioned in his post, GBA, you can set the type of protocols that you will accept during an authentication session. Authentication Nexus sessions is considered as PAP/ASCII, so you should be good to go. I don't have a Nexus switch to test with, but if you can use wireshark to capture the session and see the exact protocol / method used. However, I am sure that PAP is the way to go:

    http://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/SW/4_1/NX-OS/se...

    I also found the link that you might find useful:

    http://www.802101.com/2013/08/Cisco-Nexus-and-AAA-authentication.html

    Thank you for evaluating useful messages!

  • Autonomous AP521 can be configured for authentication WPA/TKIP with no radius server?

    The AP521 can be configured for authentication WPA/TKIP with no radius server?

    the datasheet, wpa with tkip and wpa2 with aes are supported.

    you want to use (no RADIUS) wpa - psk with tkip. WPA2-psk aes and tkip not use.

  • I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

    I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

    It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

  • I lost the toolbar that displays 'file' 'view' 'edit' etc at the top, it is impossible to follow your instructions for using the 'View' option to fix my toolbars.

    I lost the toolbar that displays 'file' 'view' 'edit' etc at the top, it is impossible to follow your instructions for using the 'view' option to fix my toolbars. I have no idea how access toolbars without this toolbar - I can't believe this allows this toolbar to delete (I did accidentally while trying to get an another toolbar restored). Thanks for any help

    Hi toby,.

    on the assumption that you always have access to the navigation bar, right click on the stop button, when the home page is loaded and check the 'Menu Bar' option in the context menu that appears.

    If you need more help see the knowledge base article the Navigation buttons such as back, home, bookmarks and recharge are missing

    Daniel

  • You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive. able to read DVDs

    You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive.  able to read other DVDs

    Hi, Virgil,.

    1. what kind of DVD are you trying to format (DVD + R or DVD + RW)?

    2. you receive messages or error codes when you try to format the drive?

    You can check if you are able to format the DVD in another computer.

    You can also read the following article and check:

    Format a CD or DVD

Maybe you are looking for

  • Flash game display images

    I noticed that lately I have experience of shifts in game flash animations. Would it be because of a faulty graphics card? In addition, after noticing the game frozen images, I opened the CPU Panel and checked the video card. I soon perceived that th

  • Problem with USB-6341

    Hello all- I'm looking for more help with an acquisition of data USB-6341 X series. I am trying to acquire samples N at a specified sampling rate, using a very basic interface of Labview 2012 on a Windows 7 machine - front panel is a waveform graph,

  • Cannot uninstall/remove Citrix XenApp Plugin Weg

    We cannot delete an incorrect version of Citrix XenApp Weg Plugin downloaded last week.  It says "prepare to remove", then another window comes up saying "Please wait while Windows configures Citrix XenApp Plugin Weg", then a third window appears say

  • Play .avi with Windows Media Player files

    Try to play the .avi with Windows Media Player

  • Function keys not working do not after Windows 7 installation

    Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you What can I do with this? I