Impossible to validate my Windows XP software

Similar Questions

• Impossible to validate using a phone system

  Separated from this thread.

  Validate the software tells me I have genuine copy, but still impossible to validate using a phone system.

  Any help thanks

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool

  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once saved, run the tool.

  Click on the button continue, which will produce the report.

  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.x

  -in your own thread, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!

  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• Impossible to validate your subscription to Muse from Adobe

  When I started my Muse today, that's what he told me:

  Impossible to validate your subscription to Muse from Adobe

  We were not able to validate your Adobe Muse subscription for a period of time. Connect to the Internet to continue using Adobe Muse.

  I have a subscription valid creative cloud. While I've been with muse since it was released, I added to each update. I connected the creative cloud. I am the admin on my computer, although I had problems with admin with adobe products in the past. My computer runs windows 7 64 bit. I tried uninstalling muse and then re - install with the application manager Adobe, which I'm connected to.

  What should I do for my work as a Muse. Help, please!

  Please delete the files "MBLStore" and "OOBE" found in

  on Mac: / Library/Application Support/Adobe

  Windows XP: Settings\Application Adobe application

  on Windows 7: \AppData\Local\Adobe

  and delete the file "AdobeMuse" in

  on Mac: /Library/Preferences

  Windows XP: \Local

  on Windows 7: \AppData\Roaming

  Then launch Muse. It will go through the first launch experience to ask for the language of the INTERFACE, AdobeID, etc..

  If there is no change in behavior, please try to access:

  https://na1mbls.licenses.Adobe.com

  If you do not have to this site there may be a firewall or other software blocking the connection. Muse should be able to reach this URL https and 3 others to complete and control the process of subscription/trial.

  If you can view the page at this URL, and then send the file PDApp.log

  on Mac: /Library/Logs/PDApp.log

  on Windows 7: \AppData\Local\Temp

  to [email protected] as well as a link to this topic. Thank you.

• Help! I can't validate my Windows 7

  I had a lot of technical problems in trying to validate my Windows 7 operating system.

  I have been using a genuine Windows 7 key and disc years but had to make several relocations from my computer in the year due to viruses and spyware. And now my new computer displays randomly "this copy of Windows is not genuine" warning and the screen is black after about six months after I installed Windows 7 top and executes updates.

  I spent six hours trying to get Windows 7 to validate - he gave me a dozen script errors whenever I ran the validation software. After a few hours, the windows activation has finally provided a menu with a phone number and the option to enter a product key - do not know why he decided to work this time. When I entered the product key, I was informed that the key had been blocked by Windows.

  What can I do to fix this so I can use my series? I bought the software and I use it on all other systems.

  No company should penalize the customer and impose an undue burden on them something similar to the use of their product. It's bureaucracy and micromanage on steroids. If I had an alternative to Windows, I would use it in a heartbeat.

  Sincerely,

  Anonymous Windows user

  1 R.click my computer, properties, new look of the window at the bottom of the screen, 'Validation of Windows'

  It should say valid. If this isn't the case, enter the product key. In addition, in Add/Remove windows components,

  Do scroll down, chk, the box for the validation of windows software, modify others, close and restart the pc. In addition, in

  race or cmd, type: services.msc in msc, scroll down to locate the windows process activation, double

  click it, run the value auto start service, release, search, & set windows module installer, as before, output msc...

• "Generalized box Expierance" Sysprep.exe re-validate my Windows 7 license on the original motherboard

  I bought myself a new motherboard to replace the pre-built that I have

  and had to use the Sysprep.exe to boot on the new motherboard

  However I did not know that what is causing my Windows become invalid license
  To avoid buying a new license, can I use Sysprep.exe to Resintall the HARD drive on the old Board and have to re-validate the Windows license.

  The former Council will use a different CPU, however
  Point being, it is that I use the old parts of the original computer and others to build a computer for my girlfriend

  If she will ask the Commission to origin, can I give this HARD and buy my self a new copy of Windows for my self

  because I think that the less expensive road would then buy him a copy of windows and myself, a new license

  Or do I now have to purchase a license for this copy of windows now that I've done the OOBE Sysprep.exe?

  Hello

  Whenever there is a change of material in the computer operating system begins to exit the tolerance mode. You must activate the operating system to help online or by phone activation.

  Refer to this link: activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-in/Windows7/activate-Windows-7-on-this-computer

  You can give your girlfriend the old hard drive (Note: it must enable the operating system again). However, you must make sure that the same product key is not used in another computer. If you don't use it, you will get a message that you are a victim of counterfeit software.

  I hope this helps.

• try to install 14 elements impossible to validate the serial number

  try to install 14 elements impossible to validate the serial number

  I need help

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

• «The video add-on drive could not install: impossible to validate the license online.» How can it help me? I tried the Extension handles CC too. But no success.

  «The video add-on drive could not install: impossible to validate the license online.» How can it help me? I tried the Extension handles CC too. But no success.

  This error indicates usually that one of the following problems:

  • You are not connected to Creative CC Cloud Desktop App and/or Adobe site with the same Adobe ID modules.
  • More than one user is logged in your Adobe software on your computer using an Adobe ID different from yourself, or indeed you have more than one Adobe ID that you used to connect to and the license file is damaged.
  • You are behind a firewall that blocks our license server calls.

  Please first make sure that you are connected to the Adobe website modules (top-right) and the desktop application CC (high button on the page of good settings, preferences, account) with the correct ID. If you are, then next steps are please uninstall and reinstall the extensions, reset between Manager.

• The add-on < partner name > - cannot install: impossible to validate the license online.

  Hi, I get the following in the creative cloud application error message:

  Installation impossible, impossible to validate the license online

  Error message

  The add-on < name of companion - > cannot install: impossible to validate the license online.

  
  

  
  Also, when I try to use the libraries in Adobe Illustrator, I get the following message is displayed:

  Sorry, we could not connect to the server

  How can I solve this problem?

  Thank you!

  Jamel.

  This error indicates usually that one of the following problems:

  • You are not connected to Creative CC Cloud Desktop App and/or Adobe site with the same Adobe ID modules. Please first make sure that you are connected to the Adobe website modules (top-right) and the desktop application CC (high button on the page of good settings, preferences, account) with the correct ID.
  • More than one user is logged in your Adobe software on your computer using an Adobe ID different from yourself, or indeed you have more than one Adobe ID that you used to connect to. It can also be as a result of general license file corruption. Please clear your browser cache.
  • You are behind a firewall that blocks our license server calls. Please try to disable your firewall, or try again in safe mode.

• I was wondering if I can install my Walkman mp3 on windows pc software 8

  Just wondering if I can install my walkman mp3 on windows pc software 8

  Please provide the model #. You can install Media Go software built into Windows 8 computer. Information about the content using the software Media Go to transfer are mentioned on the page below:

  http://eSupport.Sony.com/docs/portable/NWZS763_S764_S765_S763BT_S764BT_guide/Eng/contents/02/01/02/0...

  If my post answered your question, please mark it as "acceptable Solution".

• Bootcamp error: windows support software could not be saved

  When he says his by downloading the windows support software, the progress bar moves, but very slowly, but for some reason, this error is displayed when reaching approximately 20-30%.

  MacBook pro mid 2015 15 inch mjlt2ll/a

  v.10.11.3 el capitan OSX

  Can you bot mode safe - try safe mode if your Mac does not commissioning - Apple support - and then start normally and try again BC Assistant?

• the windows support software could not be saved, please help

  I have searched for help for days and am really in need of it. I tried to install windows 8.1 on my MacBook Pro 15-inch mid-2015, and every time the update of the software download fails to save on my drive. I tried to download it by clicking on Action in the toolbar just by pressing download Windows support software, but always make the same mistake, so I doubt that it is related to windows. Do I need to use a USB key? Need help please

  1 - is the ACO invites you to a USB key?

  2. If you run disk utility, you see an image listed containing this software?

  3 - is during the installation of Windows of BC or using the method of Action?

  4. can you initiate Internet recovery and run diskutil repair utilities-> Terminal disk0?

• Windows Malicious Software Removal Tool vs Malwarebyte Anti-Malware

  Explain the difference/other services/conflicts between Windows Malicious Software Removal Tool and Malwarebyte Anti-Malware.

  I currently use Anti-Malware in conjunctgion with KIS 2012.

  Hi RW,.

  Not precisely.  I say that the Windows Firewall is perfectly adequate, and I don't know any others that provide better protection (but others may have more options of configuration or bells and whistles, some will offer essentially equivalent protection, and some are not as good as Windows Firewall).  Of course, some will say that there are some firewalls that are better than the Windows Firewall, but is no longer a subject of debate and discussion than anything I saw firmly and convincingly demonstrated.  And we know that the Windows Firewall works properly with Windows and other Microsoft products and has great support.  And I never heard of software conflicting with the Windows Firewall, I heard things regarding 3rd party brands - involving mainly browsers, e-mail programs and security as well as configurations of network programs (not just internet, but internal intranet, you can have in your home using cables (, wireless routers/modems, infrared devices, bluetooth, remote deskop (internal or external) devices if used parental controls, interfaces with the security at home and/or surveillance systems wireless devices such as printers or scanners or fax machines and other similar things).

  Remember, without a firewall your computer give to anyone trying to access the system through any network or remote connection via the ports.  There are several ports, most average users never need.  The firewall blocks essentially all ports except those that are specifically excluded.  That's where you come in.  Each has a default list of excluded ports.  You must go through this list and remove all exclusions that you know you don't need (and be sure you KNOW what you have blocked before deleting the exclusion).  Each exclusion represent a hole in your security that an attacker could have access.  The less the better.  When I came through the list, I probably cut just a little less than 50% of registrants - but I cut some I used but rarely I would have rather the firewall blocks and make the extra effort to unblock port temporarily the few times that I need to leave open at all times.  Although for Vista, this article will help you understand the basic concepts of http://windows.microsoft.com/en-US/windows-vista/Firewall-frequently-asked-questions.   Attention to the last on the list because it provides links to other articles where you can get better and more information that can help you to choose and decide.

  I'm not going to argue here, since you have already the product and more.  This isn't what I would have chosen, but it is probably one of the best on the market suites and much, much better than some other choice, you could have done.  According to me, that it will probably do the job.  Quite simply, I don't know how good it is the Firewall works because I've never used this before then.  It may in fact be just as good and offer more features, or may not provide the same level of protection or cause any problems or conflicts with other programs or with your network (depending on how you setup).  I do not know.  You bought the suite because you wanted more features than just anti-virus protection.

  I think you can guess what I personally would do, but I can't advise you on what to do here - it's your software, your computer and your decision to make.  Don't forget that you can always disable the firewall in KIS and activate Windows Firewall (or the reverse), once you choose.  This comment in my post was directed at all the recipients and I didn't change it to you specifically - I mean not that it appear as more accurately you invites to spend now that you have already bought another product.  I was trying to say to people in general, he was no need to spend money on a separate firewall when the Windows Firewall has been excellent and would do the job perfectly well.  However, Windows Defender does NOT provide adequate and afflicted an antivirus program protection must be added (that may or may not turn off defender during the installation) to be sure.

  In short, the decision is yours to make.

  I hope this helps clarify things.

  Good luck and best wishes!

• Cannot validate the windows disk that is used many times.

  I have the new windows drive I also bought my college. My problem is that someone has used several times and now I can not validate my windows on my personal computer. How can I get this fact or what I can?

  MSN support

  The customer service
  

  MSN billing
  1-800-672-4551

  How to contact MSN customer service
  http://support.Microsoft.com/kb/940784

  MSN - contact support
  http://contacthelp.com/directory/Internet/Internet+service+providers/MSN?ListingID=126

  MSN support
  https://support.MSN.com/default.aspx?WA=wsignin1.0&St=1&wfxredirect=1

  MSN Member Center
  http://membercenter.MSN.com/signin.aspx?ru=%2fdefault.aspx

  -----------------------

  Microsoft technical support

  Call Service customer Microsoft direct-1-800-642-7676-heures 05:00 til time 9 PM PST (USA).

  Contact Microsoft Customer Service
  http://support.Microsoft.com/kb/295539

  Microsoft support - contact us
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - Microsoft Technical Support phone numbers
  http://support.Microsoft.com/kb/319726/en-us

  Microsoft - email us
  http://support.Microsoft.com/contactus/cu_sc_selector_email?ws=support%2csupport

  Options chat or telephone of the solution - top-right - Windows 7 Center
  http://support.Microsoft.com/ph/14019#TAB0

  Microsoft - product selection solutions centers
  http://support.Microsoft.com/select/?target=hub

  Solutions Microsoft Fixit Center
  http://support.Microsoft.com/FixIt/

• Can I run the Microsoft Windows Malicious Software Removal Tool w / Kaspersky AntiVirus with/without any problems?

  Can I run the Microsoft Windows Malicious Software Removal Tool w / Kaspersky AntiVirus with/without any problems?

  Can I run the Microsoft Windows Malicious Software Removal Tool w / Kaspersky AntiVirus with/without any problems?

  Yes.  It is a tool on demand and not in real time thus creates no problems or conflicts with the other application in real time, including Kaspersky Antivirus.

• Impossible to send using windows live mail with on restart my computer everytime, error 0x800CCC0F

  Impossible to send using windows live mail with on restart my computer every time.   I use broadband services, but they say it is not their problem

  It started a month ago.   Whenever I try to send an email using windows live mail, I get a failure;

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Subject ' Fw: Snowplow '
  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Start with this Port number.   Port 80 is usually reserved for HTTP.    Try the 25.

  Unless your host secureserver.net says something, otherwise...

  Oh.  They do it?  But no information for WLMail, so you have to adapt...

  http://products.secureserver.NET/email/email_thunderbird.htm

  (BING search engine for)
  Site: secureserver SMTP .net
  )

  In particular, I think, note this:

  NOTE: "smtpout.secureserver.net" is a relay SMTP server. To use this server to send e-mail messages, you must enable SMTP relay on your e-mail account. Connect to your management page email accounts to set up SMTP relay. If you have not set up SMTP relay and allows it to your Internet Service Provider (ISP), you can use the server of mail from your Internet Service provider. Contact your Internet service provider for this setting.
  

  BTW if you use WLMail.exe you can also try to get help from the WLSC through its Mail Portal

  http://windowslivehelp.com/product.aspx?ProductID=15

  Good luck

  Robert Aldwinckle
  ---