Impossible update finished, kb2518864, kb25720373, kb2633880, program update for Windows on Windows XP SP3?

Similar Questions

• Security update for Windows XP (SP3) KB977914 install, error Code: 0xD0000135. Can someone provide a fix?

  Security update for Windows XP (SP3), KB977914, install, error Code: 0xD0000135.

  Can someone provide a fix for the error Code: 0xD0000135? I tried to update 5 times since 09/15/11.

  Thank you very much.

  Cynthia

  Hello

  first of all – have you tried to download and install this update manually? If this isn't the case, you can download it from here (the good language):

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16170

  LC

• should I install the update for windows xp sp3? He is later offered to me automatically.

  I ran my usual the taskbar Windows Update, and it's give me Windows XP Service Pack 3.  I think this is the first time, he offered an upgrade to me on this pc.  I remember something in question about SP3.  Should I install the upgrade?  Help, please.

  Yes.

  Quote: To continue to receive updates for Windows security, make sure that you are running Windows XP with Service Pack 3 (SP3). For more information, refer to this Microsoft web page: support is ending for some versions of Windows

  FYI

  1. How to obtain the latest Windows XP service pack
     http://support.Microsoft.com/kb/322389

  2. Release notes for Windows XP Service Pack 3
     http://support.Microsoft.com/kb/936929

  3. The space of hard disk required for Windows XP Service Pack 3
     http://support.Microsoft.com/kb/947311

  4. Steps to take before you install Windows XP Service Pack 3
     http://support.Microsoft.com/kb/950717

  5. List of fixes included in Windows XP Service Pack 3
     http://support.Microsoft.com/kb/946480

• Cannot install updates for Windows XP SP3

  Well for some reason, I am unable to update a new installation of Windows XP Pro after installing SP3.

  I tried the following:

  Reset.

  IE6 is in tools > set windows update (gave me the message of not being able to be updated unless the update to sp3 which I am already)
  The Windows Security Center on the left hand side click on "check the latest updates from Windows Update." Got the same page as described before.
  Microsoft Windows browsed forums - found a lot of comments saying problem has been resolved by updating to IE8.
  Updated to IE8. Restarted. Waited to see yellow shield in the corner saying windows has been downloaded updates. There can be no.
  Click "Check the latest updates" once again, he launched IE8 but led me to the same page, telling me to SP3 again, I already have)
  Checked under System Properties I'm at SP3.
  The active firewall settings. Make an exception for wupdmgr and wuaclt. Think the windows firewall can block updates.
  Waited for updates again. Yet none came through.
  Click "Check the latest updates", waited a bit came updates.
  Entered the update IE8\Tools\Windows and got the same message to update again.

  There is no other software virus on the PC at the moment.
  I was Imaging PCs for several weeks, and this is the first time I have encountered this problem.

  I have .net framework 2.0 and 3.0 is installed. They have been installed prior to service pack 3. I tried to uninstall, but it wouldn't let me, and I'm not entirely convinced that is the problem. Any ideas?

  This PC has been infected by a virus previously. However until I did the reinstall I had deleted the partition previous and had the drive reformatted when you set up...

  After a clean install, you will have the equivalent of a "new computer" in order to take care of everything below in order before connecting otherwise the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other disk to the computer:

  1. make sure that the Windows Firewall is enabled.

  2 uninstall all now invalid Norton, McAfee, etc., free version of test which have perhaps been reinstalled when you reinstalled Windows, run the appropriate removal tool, [1] before installing the antivirus of your choice application (for example, Microsoft Security Essentials - free).

  3 then only get to Windows Update & get the fully-patched computer! [2]

  4. ensure that Windows Defender is turned on (Vista & Win7) or installed (WinXP)... unless you opt to install Microsoft Security Essentials which will disable the default Defender.

  ... Also ran ccleaner and clean registry, it has not helped either.

  No, it's only issues worse, I assure you!

  TIP: If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  ===============================================
  [1] Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer products removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  [2] HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

• I downloaded 14 updates for windows xp sp3 from the windows update site, but they all failed to install. Any ideas?

  This failure occurred only after I upgraded to IE 8 (powered by msn and Bing). Previously, I had automatic updates to download updates, but let me chose when allow updates... when I was using IE 7. This is the second time I tried to download and install the microsoft updates and had them fail. Any ideas?

  Surprise, surprise... When I shut down my computer last night 14 all updates have been installed. I was given a chouce when came the turn off computer area. He said that I could either click the icon to turn off (and install updates) or click on another line to not install updates. I clicked to install and the computer went to the blue screen that she normally does in the judgment he said the updates were being setup and don't stop or unplug the computer.

  Thanks for your help, people!

• When I update for window xp sp3 and I lost my Korean language pack

  When I switch to the window xp sp3 I lost the East Asian language pack as Korean and my computer can't read the xp cd to install. How can I get the East Asian language pack?

  Hello Kleesfo,

  You can try the steps in the below link which will give you information on the installation of the language of East Asia on your computer files:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_install_languages.mspx?mfr=true

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• new update for windows has done by creating a new floder by impossible right clicking?

  new update for windows has done to create a new folder in the impossible? Right click to create a new folder displays the option to create a folder compressed, but not creating the new folder option?

  It is not a topic I know, but if you search the forum for the new folder, you will see multiple reports of the same problem & the answers.

  Here are a few of them to start: -.

  Button new folder does not	on my desk that I right click again and there is no option for a new folder when I go to one of my libraries and do the same thing he is still not there and when I go to any library and click on the top
  Cannot create a new folder in Windows 7	Logged in as an administrator in Win7 Pro and cannot create a new folder in any directory. When I try to do it so I no longer get an error message such as
  File system 512 error - cannot create a new folder	Hi, I can't create a new folder under libraries/photos. I have several folders and subfolders, but lately when I try to create a new folder directly in
  How to create the new folder	When I right click and choose the option for a new folder, I only get the option new folder instead, I have the shortcut option, there is no option for the new folder, how to change that in order

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• Update for Windows Vista (KB2676562) Security - Code 8007065E error

  Update for Windows Vista (KB2676562) security failed 34 times since 05/16/12.

  How to solve this problem?

  Hello

  Follow these methods.

  Method 1: Follow the steps in the article.

  The problems with the installation of Vista updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: You can temporarily disable your antivirus and then try to install the update.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow these steps.

  Step 1: If the methods above do not help, we can put the computer in a clean boot state, and then install the update manually.

  To help solve the problems, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Step 2:
  Now, to install the update manually.

  If you use a 32-bit computer, download and install this update.

  Update security for Windows Vista (KB2676562)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29829

  If you use a 64-bit computer, download and install this update.
  Update security for Windows Vista for x 64-based systems (KB2676562)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29768

  Please take note : After completing the clean boot troubleshooting, make sure that you start the computer in normal mode.

• Windows Update won't install platform update for Windows Vista, and I can't find it anywhere to download.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/kb/971644

  How to get the platform for Windows Server 2008 and Windows Vista Windows Update updates

  Update for Windows Server 2008 platform and the platform for Windows Vista update can be downloaded from Windows Update. To obtain these updates, follow these steps:

  1. Click Start
     Collapse this includes this image

     

     Click all programsand then click Windows Update.

  2. In the navigation pane, click check for updates.
  3. When updates are found, click view available updates.
  4. Select the package to update that you want, and then click install.

  For problems with Windows updates:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Failure of the security update for Windows xp

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  , Then they have all the same numbers but automatic updates. I do not know why they do not?  Is my computer in danger? What someone knows something about it?  Can someone let me know, I would really appreciate it.  Thank you :)

  Lower-right, now, I get an exclamation icon, when I click on it, it lets me know that I have updates to install, it goes through the whole procedure, but he then shows how they all failed.  Just today, I had 18 of them.  They are all updated for Windows XP security they all begin with (KB) other numbers are all different. (KB978601), (KB979683), (KB978338), (KB979309), (KB981332), (KB977816), (KB980232) Microsoft Update.

  I would try reinstalling Windows Update Agent Installer first.  Here is a link to the Microsoft site that explains how to do this: http://support.microsoft.com/kb/949104.   Go to the section how to get the last update agent, as it is already installed.  Scroll down to the section under the information tab, called Windows Vista, Windows Server 2008, Windows XP, Windows Server 2003 and Windows 2000 Service Pack 4.    Choose the one that fits your computer (x 86, x 64, Itanium).  Run this update and follow the instructions.  Windows Update will now be reinstalled, but it's a good idea to restart at this point.  Check if your updates to install.

  Otherwise, you may need to install manually by following the directions below:

  (1) Download Center to visit Microsoft: http://www.microsoft.com/downloads/en/default.aspx
  (2) search for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB979309)
  3) click on the link for the download and then click on download and run. You must accept the agreement and then click on continue.
  (4) repeat this process for each download of updates Windows could not install.
  (5) run Microsoft update again, and click Find updates.  If all goes well, it will show that you are completely patched.

  It is always better to stay completely patched, as many of them are security-related.  If the solutions above do not work for you, I recommend that you run a full scan on your computer.

  Barbara

• Will not download updates for Windows 7

  My machine tells me there are 17 downloads available, but when I try to download the green progress bar tells me something's happening, but nothing ever happens

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  FYI

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services run properly

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Updates for Windows 7 cause PC to hang during the startup or reboot

  I had trouble with the latest updates for Windows 7 on my 64-bit computer.  Whenever I have install the PC does not restart.  I had to restore twice.  Updates are KB2284742, KB2388210 and KB2434419.  I had Avast on my computer and now deleted and installed McAfee.  I also tried Lavasoft Ad-aware, but he's also gone now.  Prior to the first installation of this update, he's failed several times.  Finally, I followed someone's suggestion to rename catroot2 to catroot3.  This allowed the installation works.  I scanned for virus and McAfee says that there is not.  Lavasoft had said there was an and it has been deleted, but since I restored it twice, I'm not sure if it's still there.  I'm reluctant to try to load Lavasoft once again, like the elimination of the virus is what started the problem of PC with reset.  I suspect that what they thought was that a "virus" was not.  Now that I am restored to before the update my PC very well is rinning, but of course, I keep getting reminded that I have 3 critical updates to run.  I am not advanced a user so am at a loss, can I ignore updates and try to continue to work without them?

  Hello

  You can try to manually install the update one and check what is happening. Download the updates from the link given below using the KB numbers.

  http://www.Microsoft.com/downloads/en/default.aspx

  Note: Before installing each of the updates, configure the computer to clean start so that none of the third-party application interferes with the installation process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update for Windows 7 x 64-based Systems (KB2345886) fails

  Update for Windows 7 x 64-based Systems (KB2345886) fails everytime. I have restarted my computer several times now. Whenever I do, update indicates "Failure configuration Windows updates" and I have to restart again. Whenever I am able to log in again, it says that I have to restart my computer to perform updates. Once I've done this several times now. What's wrong? What must I do to fix this?

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• A security update for Windows XP (KB975560) and __Security update for Windows XP (KB977914) __Keep showing as needing to install even after update. Why?

  Update for Windows XP (KB975560) security and
  Update security for Windows XP (KB977914)
  appear on install Shield yellow Auto.  I tried to update both with Express and custom methods and then restart or shut down according to the instructions. Subsequently, it says full but in no time the Exact same shield updates pop-up again as needing to be installed again. Why?

  Norton was the original installation that came on the machine, but I removed that before starting the use of Trend Micro about 3 years ago

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves. If you have not already done so:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now to reset Windows Update via the difficulty it here: http://support.microsoft.com/kb/971058

  TIP: Run the difficulty in default and aggressive mode.

  5 restart once again & test (see, for example, if Windows Update offers KB975560 and KB977914 after their installation once again, if you are prompted to do so).

  6. update of security for Windows XP (KB975560) and/or update of security for Windows XP (KB977914) listed in Add/Remove programs now?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft