Impression that freezes

Original title: last printed document "freezes" in the printer (as.)  Can't cancel even through the Panel, printers and cancel/remove the last document printed out-of-print (as.)

After printing a document it "freezes" in printing (QC) when I go into Control Panel to manually remove the 'frozen' document, it will cancel all previously sent documents to print that accept for the ultimate (which has already printed).  I tried to remove the key administrator with nothing doesn't.  I also tried the 'Fix It' running, but he could not fix problem.  The only way to 'clear' the 'frozen' document must stop computer and restarts.  The 'frozen' document prints automatically when the computer is turned back on and the printer is temporarily disabled.  I may be able to print documents 1 to 3 until it 'freezes' once again, sometimes only 1.  It becomes a royal pain!  Someone please help.  p.s. I noticed this problem started when I downloaded Commodo Internet Security a couple of months.

Go to start / Control Panel / Administrative Tools / Services and go to the print spooler.  Stop the service and then restart it again.  I think that will clear the stuck document - but it's just a way to solve the problem (if it works), not a solution to the question in the first place.  It's a pity, there is if a long time because I'm sure you have no restore point that goes far back to do a restore of the system which would normally be my first recommendation in a situation like this.

Try disabling or uninstalling Commodo Internet Security to see if the problem goes away. If so, we now know the cause and you may need to decide on the use of various security software.

If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

You can get in trouble with your device drivers. Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shoulddo it for your printer, including drivers, firmware and software at least and all you have time to do - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • HP Officejet Pro 8600 Plus: print jobs get stuck in the impression that

    Documents of any kind stuck in printing (QC) email, print screen, word, excel.  It does not matter.  And it happens intermittently on a daily basis.  I read older messages and understand how to remove the impression that, but I want a solution as to why and how to prevent it.

    Take a look at this HP support page.

  • Where to find images that freezes my screen saver

    My screensaver is family pictures, I have two photos that freezes my screen saver when they appear. But I went through all the photos in my pictures and I can't find these two photos! So where should I look for to delete?

    Hello

    1. which version of the operating system you are using on the computer?
    2. don't you make changes on the computer before the show?
    3. What is the file format?

    Method 1:
    You can view hidden files and check:
    Check out the link and uncheck the hidden files, folders and drivers
    http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

    Method 2:
    You can scan System File Checker to fix corrupted files.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833
    Method 3:
    See the steps from the link to recover deleted files.
    http://Windows.Microsoft.com/en-us/Windows7/recover-lost-or-deleted-files

    Method 4:
    Run a Microsoft security scanner to make sure that the computer is free from virus infection:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    WARNING:
    If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

    Reference link:
    Photo management
    http://Windows.Microsoft.com/en-us/Windows7/managing-your-pictures

  • I received an email a few weeks ago that freezes my eyes express page when I click it. I was unable to delete or move in my Inbox.

    Outlook Express problem

    I received an email a few weeks ago that freezes my eyes express page when I click it.  I was unable to delete or move in my Inbox.  Everything has seemed fine until today, that I'm unable to remove all new emails arriving in my Inbox.

    Which indicates the corruption of the Inbox, as suggested by Bruce.  But it may be that you enjoy other files that are corrupt.  You'd be better by clicking file | Identities and establishing a new identity.  This will give you a base of messages clean and incompetent.   Then you can go to file | Import | Messages and import them from the old identity.

    Steve

  • How can I remove an item in the impression that who refuse to cancel?

    How can I remove an item in the impression that who refuse to cancel? It keeps me to print anything else.

    Hello

    I think that you need to remove the tail. For Windows, try it please:

    • Hold down the Windows key and press R.
    • from the run window, type services.msc and press to enter.
    • If the computer asks you to Admin, you have to accept that,
    • regarder watch down to the print spooler service, right-click and select Properties
    • Click the Stop button,
    • Go to C:\Windows\System32\Spool\printers
    • delete the job inside this folder
    • restart the machine.

    Kind regards.

  • Hi, I had the impression that photoshop is free to use if you're already paying adobe?

    Hi, I had the impression that photoshop is free to use if you're already paying adobe?

    If you have a monthly or annual subscription that's all you pay. It's subscriptionware

  • How to animate a line with the pen tool to give the impression that it is plotted?

    How to animate a line with the pen tool to give the impression that it is plotted?

    Or you can choose the pen tool (g), set the padding to zero and the race to what you want, then draw a path, then press U twice to reveal all of the properties that have been changed for the layer, and then click Add (top-right) and select Connect the tracks.

    To make the race work just animate the start or end point and sent to paint on original or reveal original or normal.

  • Hello! I have an Adobe Creative Cloud membership and was under the impression that I was allowed to host 5 free sites through Business Catalyst. However, when I launch my site built in Adobe Muse CC by Business Catalyst he orders to buy a h

    Hello! I have an Adobe Creative Cloud membership and was under the impression that I was allowed to host 5 free sites through Business Catalyst. However, when I launch my site built in Adobe Muse CC by Business Catalyst he ordered to buy a hosting package. Can you please explain what is happening here, and how can I use my free hosting?

    5 free sites ended. It is not available from the CC and more.

  • How to make malicious Web sites that freeze Firefox?

    I have di/scovered sites accepting some capture the tab in which they are open, freezing access to menu options (display, tools, etc.) and do not allow any Firefox close. Computer shutdown and re-opening is not free the captured page. The following sites are all suspects.

    http://www.health4reporter.org /.
    http://www.health11online.org /.
    http://www.daily10reports.com /.
    http://www.daily10reports.org /.
    http://www.daily5reports.org /.
    http://www.daily12reports.com /.
    http://www.theweightlossspecialist.com /.
    http://www.daily8online.org

    Personally, I have confirmed that the last http://www.daily8online.org, is malicious. Others I have not confirmed, but they all came from the same source, the comments posted on a blog at KittyKroger. com

    I was able to clear the browser only by going to the discount to zero that puts Firefox to its default settings.

    Hello

    You can report these links to the Internet Crime Complaint Center of the FBI:

    You can also report false web documents by going to:

    • Help (or

      >

      ) > Report false Web

    Make sure that the navigation of the suspected sites.

  • How to fix streaming videos that freeze at a certain time?

    Well, when I load a streaming video on streaming sites (not live), they play the intro and when it gets to a certain stamp(4:12) of time it freezes on this scene, and when I try to advance the time, so it does not freeze on this scene, it freezes again on that even if the time stamp said 04:30 and his game dialogue different from when it froze.

    This looks like a problem with buffering because of the Wi - Fi connection. What is the connection?

  • impression that will not erase

    I have a HP Deskjet 3510.

    He stopped in the middle of a print job.

    Indicates the printer is ready to print, however the print job is stuck in QC.

    I tried to delete the job, cancel the print job — without result.

    I saw something spools of impression, but works on a laptop computer in Windows 8. I can't figure out how to get where I can update the printer spooler.

    Thank you.

    Here's a post on the Microsoft forum that has the info you need: http://social.technet.microsoft.com/Forums/en-US/0f199e96-3fab-4f56-b961-81596a6267ce/print-spooler-issues-with-windows-8

  • Is - this Windows 7 that freezes the cs5 first?

    I'm quite new here and I looked at the subjects regarding the freeze ups but I don't see anything that looks like my problem. I hope that someone had the same problem and fixed random freeze ups when editing on first CS5. This is a recent construction and I tested it on Vista 64 and it works like a champ! So my question is, is Win 7 64 bit more unstable? Like Vista Win7 64 bit needs to be optimized?

    Here are the build:

    OS: Windows 7 Professional 64-bit with recent updates

    Editing software: first CS5 (recent update 5.03)

    Motherboard: Asus Sabertooth x 79 LGA2011 with recent driver of chip

    CPU: Intel Core i-7 3960 3.3 ghz (not overclocked)

    CPU Cooler : Corsair H70 Hydro CORE liquid CPU cooler

    RAM: Corsair Vengeance 16 GB PC12800 DDR3 1600 MHz 4 x 4

    Hard drive: Seagate Momentus XT 750 gb 2.5 "SATA 6 GB/7200 RPM/32 MB

    Disk storage: 1 TB SATA HD 7200 / 64 MB/SATA - 6 G x Seagate 2 in RAID 0

    Graphics card : ASUS GeForce GTX 570 1280 MB GDDR5 PCIe II DirectCU (with the recent driver update)

    DVD ROM: ASUS 12 X Blu Ray writer retail

    Power supply: Corsair TX650 650W 80 V2 Series Enthusiast + Bronze

    Most of the things I change is MTS.and MOV. my Canon 7 d and Canon HFS200

    Any help would be appreciated.

    -Ian

    Alan,

    I just installed the latest version of the bios version 0906 crossing my fingers. My version was quite old. Inform you after a day to see if it works. Thank you.

  • Impressions that come back from the lab, dark, dull

    Hi all

    I fight with this problem since I started using Lightroom.

    I use XP SP2, Lightroom 2.3 and CS3. Sonic View monitor calibrated with Spyder2. For printing, I use a Canon Pro9000.

    I work in RAW (Canon 50 d) and convert to jpg (Adobe RGB 98) for the laboratory. The profile is embedded.  On my Canon printer, the impressions are good, very close to the screen. I let Photoshop manage color and use the profile of Canon PR1.

    I always get prints back from the dark lab, with a little creepy skin tones.

    If I turn the brightness and the contrast down, I can get the screen to look like prints, it is medium to dark to work with. I used a second monitor to compare, they seem pretty close to call them the same.

    I was fine that the process as many times and just can't see what I'm missing.

    Going Nuts,

    Paul

    I might try to send an sRGB image and see if they do better. It sounds

    for me as a Web interface (the editing window that call you) is stripping

    profile from adobeRGB. WHCC should be able to use the profile that you set the

    they say they do. They provide the color correction, which you should be able

    to turn off somewhere.

  • Mail in response to error reports contains links that freeze

    When Mozilla support sends a response to my Hotmail account, it contains two links. One is "It does not solve my problem" the other is "Browse for any unresolved issue and help a Firefox user. The browser crashes in the browser every night, if I click on one of these. No other tab can be opened; the arrow may be used; the symbol of the refresh does not work; and every night can only be closed from the Task Manager. Even worse, if it is left open it disables the other applications. While Task Manager is open, if we move it, it leaves a trail of repeated copies of itself. If Quicken is closed the screen rest on the screen. Even by using CTRL + ALT + DELETE to refresh the screen and asking only open the Task Manager does not solve this problem. I am REALLY part of a beta test, or do you all just jump Alpha and give us something that looked like, it could be called a browser?

    Hello

    For now, you seem to be using the Nightly of Firefox version, it is an earlier version than Developer and two beta versions is therefore likely to contain random questions as it is still ongoing.

    I recommend that you file a bug in Bugzilla so that this can be looked into.

  • Reviewers gave me the impression that worked ePrint * now *.

    I just bought a D110a so I could print from my iPad. I set up and surprise... no ePrint.  I want all the media has agreed to keep the silence in their comments that this feature doesn't exist in reality.

    Thus, it will be soon available? I mean, as many of us already had perfectly good printers, but this particular product just for this feature...

    ePrint service is effective July 15, 2010 @ 13:00.  My printer showed an expectation of the update, I've updated and printer print all information, including the new address eprint.  Sent an email to my HTC HD2, printer received in 5 seconds foto, printed the photo (5 x 7) in less than a minute.  Excellent service!

Maybe you are looking for