Improve the signal from the router

Hello, I need a Wi - Fi Range Extender, I take the powers a little signal.

The technology of these accessories and take a signal and strengthen it as a router or a switch-> Range Extender WiFi-> and the client has an attenuation of the signal?
It remains the same as that which carries the router?
It strengthens it so that you have the strongest signal for customers.

My problem.
Router standar Telecom in an apartment of the third floor of a building where the ground floor it is local (shop with three slides) who must pick up the signal. Now that with the router, the signal arrives but, weak, and there is a local point where the signal and the stronger, enough to be able to navigate with a non-performing smartphone.

We would like to put a Range Extender Wi - Fi to the strongest step to bring it to the customer.

Your WiFi Range Extender are all uquali for the work that I do, or I have to evaluate some of the same characteristics.

I explained enhancement, signal loss?

Thank you.

Hello creatt

An Extender, you should get better report you would like to place somewhere in the middle where you need wifi and the router to get the best coverage.

DarrenM

Tags: Netgear

Similar Questions

  • How to optimize the signal from my router?

    When Im in a room on the ground floor, hence my router is in I can barely get a signal on my iPod Touch and the Xbox!   I was wondering if there is a way to optimize the signal from my router so that I won't have no connection issues... PS.  sometimes resetting the router help, but not as much as I'd like.

    Try these settings.

    Access the routers admin pages.  Connect via a wired computer to 192.168.1.1 with your browser, the empty user name, the password "admin" (everything that you change too).

    Disable UPnP.  Under settings wireless Beacon interval 75, RTS and Fragmentation threshold to 2304.  Try channel 1 or 11.  Save the settings and reconnect.

  • AE6000 sometimes stops the signal from my router 5G

    I manually installed the driver for my AE6000 in my newly updated windows 8, it works very well with my router 5 G - AC (TP Link Archer C7), however, when I turn off my desktop computer, loses 5G signal in my router and I have to restart my router to get the signal of 5G (it is not affact 2. 4 g my router is at the same time broadcasting 2.4 G and 5 G). I did not have this annoying problem when I used Windows 8 with AE6000 on my desktop and windows 7 with AE6000 on my laptop.

    It happens all the time, 20-30% chance. What is a compatible driver issue? Is there a solution before the next driver? Thank you!

    Hi, apeyrosi. For me, it is not a compatible driver issue. As long as you are using the correct driver for your card, then is should not be any problem. Have you tried changing the channel on your TP Link Archer C7 wireless? If you haven't already, then I suggest you do to fix your WiFi problem

  • RE3000w recognizes not all signals from my router

    Howdy,

    My router has a 5 Ghz and 2.5 Ghz signals. When I used the installation program, the software reported only 2.5 signal. I would prefer much more powerful signal, but it does not list it after several attempts. The software displays all other signals in my neighborhood so I know that can be done.

    I click the button "my router is hidden" and towards the top has a form. I filled with information from my router, but then the software does not even signal 2.5.

    So I finally put it to use the signal 2.5 but man, it's a loss of signal is good. How can I get the software to recognize both my signals?

    Dangrsdan

    Hi dangrsdan. I don't think that the RE3000W will never connect to the band of 5 GHz of your router, since this extender model is a single tape device and supports only the 2.4 GHz band.

  • My p6000 resumes signal from the wireless router. He has worked for months, has left, any help?

    HP Pavilion p6631p

    Windows 7

    I have a slightly new wireless router and the PC is always connected like this, but in the last days he will not pick up any signal from my router or our hot spots of our my touch 4g cell phone.

    It will not work so hard cable...

    Occasionally, he'll go get a weak signal, but I think there out crapped on me, anyone else having this problem?

    Warranty has expired 3 weeks ago! Pissed! I think they do it on purpose.

    If the antenna wire is not damaged or not connected, I would consider looking at an ASUS, Linksys, D-Link or Netgear PCIe x 1 or wireless USB adapter to replace the original one. Here is a selection of Newegg.

  • 2.4 ghz disabled, try to connect at 5 ghz, no signal from the router

    Tried switching to 5.0 on the 192.168.1.1 page and no I have no signal from my router on any of my devices. Internet is fine.

    one of your devices do see as the 5 GHz listed when you watch SSID? You must get your devices and see if they are capable. otherwise, you won't see even listed

  • When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

    I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

    Original title: router does not work...

    Hello

    Welcome to the Microsoft community.

    I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

    You must contact the ISP to verify if they can help you with this question.

    In addition you can keep these items handy, it might help you.

    Set up a wireless router

    http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

    Install or remove a modem

    http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

    Change modem settings

    http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

    It will be useful.

    If you need help with Windows, let know us and we will be happy to help you.

  • poor wireless signal from the router to the new hp pavilion desktop computer

    getting poor signal wireless to the router to the new hp pavilion desktop computer. router 10 feet away. Help!

    Wireless router works fine for the 3 most old cell phones in the office.

    I heard that desktop computers receive wireless signals, but also laptops.  Is there a solution out there for this situation, in that I am?

    Thank you

    Roland

    whatifu wrote:

    A geek at Best Buy told me to open the box and put a few sheets of Tin around the antenna inside. What do you think?

    Roland

    Hello

    Also my suggestion BUT you need to do, of course, don't let touch to the Platinum

    All the best,

  • Wireless LAN does not receive the signal from the router

    Yesterday, I bought a toshiba satellite pro L10 and it's got wireless, but for some reason some can't find any network even when I'm in the same room as the router. What can I do?

    Hello

    Well. First of all, check if the wireless antenna is turned on. Check the switch on the side. In addition, with the FN + F8 key combination, you can switch between the Bluetooth card and wireless.
    In the next step you should check the wireless network connection properties
    The option use Windows to configure my wireless network must be marked.

    Good luck

    Good bye

  • WRT150N wireless - download speed of connection is super slow when I move away from the router.

    I have a suggested internet high speed through Comcast, and my wired computer is get 6 download MBS. My wireless laptop is close when I'm a few feet from the router, but decreases significantly when I move out of the room - up to 200-300 KPS.

    I can't even watch a movie from netflix on the floor without stopping and buffering several times in a 1/2 hour show.

    Long-story-short: I expect too much on this Wireless N technology, or is there something wrong with my router, connection, configuration, etc. ?

    The strenth of signal on my laptop shows excellent quality for good, but the speed is terrible.

    Any suggestions / advice?

    JL

    It could be due to the wireless settings are on your router has its default value, which is the reason why you might be faced with the problem. I think you need to change some settings in your router...

    Connection to the router configuration page and then click on the tab below the Strip Radio Standard - 20 MHz and the Standard 11 - 2, 462 GHz channel change and wireless... Wireless SSID broadcast should be enabled and then click on save settings...

    Then click on the "Advance wireless settings" sub-tab and below change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

    Now let's see if you can locate your wireless network and try to connect...

  • Can only connect to wireless technology in some places far from the router

    My laptop, a Samsung with Windows 7, only connects to the internet in my room by the window.  The router is located in another room, but it doesn't connect when I am near him.  It shows that I am connected to the network, but I can't connect.

    Hello

    1. What's happening while you're trying to connect?

    2. you get any error message? If Yes, what is the full error message?

    Please follow the steps below and we update with the results.

    Method 1: Run the network troubleshooter, and check.

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    Follow the steps in the following article and check.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    For more information, please see the links and check if it helps.

    Why the my wireless signal strength is so low?

    http://Windows.Microsoft.com/is-is/Windows7/why-is-my-wireless-signal-strength-so-low

    Troubleshoot low wireless signal quality (applies to Windows 7 as well)

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

    10 tips to help improve your wireless network

    http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

     

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

    Let us know if it helps!

  • Connection is de-energized when (not if) away from the router

    Hello you all fine technical staff.

    My name is Jake and I have a technical problem.

    So yes, the connection is either super slow or de-energized when I'm in my room. I am writing to you in the room next to the router and everything works A OK. But I'm going to the 7 additional meters to my room and the beginning of the problems. I have even a booster dose is plugged and it's on the same office that the laptop, but the problem persists. I'm getting full bars, but it still has problems.

    Is it maybe a problem with my wireless card? Or is there something interferes with the signal? Its a mystery wrapped in an Enigma, and I hope you smart people can help... Please.

    It could be many things, but first of all, I would recommend making sure you have the latest drivers available from the manufacturer of the system.  In this way you even if you have problems, you just the best possible start to their fixation.

    To do this, visit the Web site for the company that built your laptop (Dell, Asus, HP, etc) and go to the drivers/download section, choose your model and get the latest updates available for your wireless drivers.  This would not be a bad time to make sure that you have the updated Windows 8.1 and all other updates too.

  • Firefox prevents the connection from the router

    WRT120N router Linksys-Cisco, Firefox 22.0

    I discovered that my router rejects all attempts at connection (192.168.0.1, 401 authentication failure "browser can not perform authentication or authentication failed") when you browse to it from Firefox. It allows the connection when the attempt is made of Chrome.

    I remember having long ago something similar with Firefox, but resolved by disabling the option "say it me not to follow the sites", following what connections made; just looked and it is still not verified - if this isn't it.

    I looked a the packet capture and the password IS sent to the router, but it rejects the connection.

    Any ideas?

    "BUT IT WORKS CORRECTLY BOOTED IN SAFE MODE."
    Which prompted me to check the extensions.
    I called, guess what... TAKE STEPS TO TRACK ME.

    (Why is there such an extension if it is built in function?)

    Disabling, allowing the router to connect! I don't know why twice now, try to activate Do not not track eliminated the possibility to connect to the router... but this is the solution.

  • Toshiba 42Z3030D TV not receive signals from the remote control

    I can't use any (Toshiba or the distance from Sky TV) remote on my TV.

    Everything works on the TV when I use the buttons on the side of the TV but the TV does not seem to receive all signals from remote control.

    I changed the batteries in the remotes, and it still does not work.

    Can anyone help please?

    Model: Toshiba 42Z3030D TV

    T couldn't be possible that your TV remote is malfunctioning?
    Maybe you need to replace.

  • So I updated the current software on my iPhone 6 and wifi started to play it doesn't work when I'm near the router up and when I'm away from her stops working someone can help me?

    the wifi does not work on my iPhone when I'm away from the router in my room, but it's not too far, it's like a couple of inches away from the living room and it does not work for some reason...

    First restart the router - remove all power for 15 to 30 seconds.

    If that is fixed not try to change channels on the router using the router configuration panel.

    On the phone go to settings/general/reset - Reset network settings if any of the above doesn't help. It will be reentering your WiFi password.

Maybe you are looking for