In 2013 TestStand, reportgen_html.seq, flow of data transfer

Hi, guys.

I want to know the effect of each step of the sequence, but I do not understand step > AddStionID > Expression, for example below:

I want to find where are set Locals.HeaderNameTagStart, Locals.HeaderValueTagStart, and so on.

Based on the ResStr(), what is meant by 'MODEL' means?

Think.

The term 'Model' is referring to a section in the definition file

http://zone.NI.com/reference/en-XX/help/370052N-01/tsfundamentals/infotopics/resstr/

To find out where the variables are defined you can try CTRL + F to search for occurrences of right by using the search options change

Tags: NI Software

Similar Questions

  • 2013 TestStand user interfaces

    I upgraded to TestStand 2013. When I try to use the all-in-one User Interface or UI Simple, I still have two mistakes any which sequence file, I run.

    I also noticed that the 'TestStandModelModelOptions.ini' Cfg file is the same file from 2012. It not was not upgraded or updated when 2013 has been installed.

    Unfortunately, I tried upgrading 2013 LabWindows/CVI and had nothing but problems when I did. Now, I tried the upgrade of 2013 TestStand and nothing else problems. I am seriously considering to move away tools NOR completely!

    Hi rreis,

    What version of .NET are you running?

    Many times this error is related to incompatibility between the applications created in 2012 of LabWindows/CVI and previous and the 4.5 .NET framework. The link below addresses a registry key which has been developed as a work around for this problem.

    http://digital.NI.com/public.nsf/allkb/0136A53F98D69B7286257AD70069A735

    Concerning

  • Controlling the flow of data

    Hello

    I'm working on a program in which I have to control the flow of data on the wires.

    The task is that the data should not pass until a given value is generated. And the program remains the playback thread until this value is generated.

    While the value received, now the passage of data to all loop regardless the data that is generated on.

    That's why I created two loops while we research this value and the other is the principal who must perform processing when the specified value is generated (taken in the first loop).

    It could also say that "wait until the reception of a certain value.

    The first loop is created just to wait until a value of 3.

    The second loop is the principal who must deal with.


  • How to change the value of string clustered, to implement using the node value of property instead of writing directly on the flow of data or using the variable

    new to labview :-) and I have a problem when I want to change the value of a string in bunches, and I want to implement this using the node value of property instead of writing directly to the stream or by using the variable, enclosed is the picture.   No matter, I have change in cluster (control) or value of Popery out (indicator) cluster, the value (sensor 7) dataflow keeps unchanged even I gave the new value by value of property node. Thank you to give me some advice about this.

    Hi GerdW

    Thanks a lot for your answer. The reason I'm stubbornly tring to break the flow of DATA is: we have a test system that have about 100 screws, they have a few connected flow, some of them will be unbundling a cluster dataflow chain to check the value in order to make the different cases.  Now I want to insert user event by changing the control and influential cases during run time.

    As I initially uses a global variable (to control cases) instead of unbundle string data flow, it works well.  But then, I found there are a lot of screws that are using the string unbundle.  One of the 'lazy' means, I tried is to change the value via the property node (because that way, I did not need to find all the places where using the unbundle string and replace them with the global variable), then I noticed a problem with "dataflow", the value in the stream of cluster in fact will not be changed by changing the value of the property node.

    I did a test with VI simple (like the picture in last post), and after reading your advice, I tell myself that I need to understand the concept of "DATAFLOW" in labview, it seems that my "lazy" way can not work in this scenario.

    I have attached the criterion VI here, have you furthur suggestions on what I can do in this case?

    Mant thanks!

    Minyi

  • can xp support a flow rate of 50 MB/s - is there a limit to the speed of data transfer, it can support?

    can xp support a flow rate of 50 MB/s - is there a limit to the speed of data transfer, it can support?

    I have a 50 MB/s via fiber optic connection and it works fine under XP.

    Steve

  • Interruption USB Raw: flow of data between USB Raw Device and Labview!

    I do the USB communication between device (Microcontroller) Labview and USB RAW. I did all the things like the raw driver OR USB and I am able to get the 8 bytes using getusbinterrupt.vi, but my application requires continuous data transfer between pc and microcontroller, inorder to achieve that I put continuous loop in the microcontroller, so it transfers the data of continuos on pc, (in this case e.g.0 to 255 and again from 0 to 255 and so on.) , but I'm not able to get increment of 1 as written in my program, instead of that I'm getting increment of 5 to 10... is it because Microcintroller is very fast as my pc? If so how can I get continuous data without breaks...

    I enclose... graphic instant with output vi this jump of the variable data... I run my vi continuously on mode...

    Like, I would also like to write to the device with labview, can you also suggest for this also? I read messages like:

    http://forums.ni.com/ni/Board/Message?Board.ID=170&message.ID=382144&Query.ID=445342#M382144, but I am facing the same problem as this user...

    Thanks in advance.

    MRS.

    26314362 wrote:

    I enclose... graphic instant with output vi this jump of the variable data... I run my vi continuously on mode...

    MRS.

    Run a quick code continuous mode is completely unnecessary.

    In your code you continiousely who and unregster events, it takes a while, maybe the following will help to improve the code:

    I don't know, but you might be able to reuse the event.

    Tone

  • Database - listener Ports - data transfer

    Hello

    If there are two databases running on the server, is it opt to configure the listening port only for two databases? and what happens if a single listening port configured?

    Thank you
    KSG

    Published by: KSG October 16, 2011 23:53
    Hi Jgarry/Hemant

    For client-server data.

    I understand as

    First, the client sends the request to the db server, the Listener listens to the connection and creates a database server process to handle the request (can be a query...

    I just want to understand how the processed information passes to the client... I wanted to say... What are the ports to transfer data from db to the client server?

    Jgarry, I understand the flow of data occurs via a separate data port (for example it can be any port 1599 or something)... So not that any additional traffic occurs between the client-server or client-server use the same data port?

    Im trying to understand the architectural flow of connectivity between the customer and vice versa. that will help better understand.

    My concern is...

    We implement a customer through TNS names connectivity. The listenes connectivity server and creates a server session to run the connectivity. Just as a request from the client to the database listen service_name "orcl", host = protocol = TCP port = 1521 abc.com. that is listening on the side Server and server recoganize the connectivity...

    Here, I am trying to understand... once the connection is established, so it's not need a listening more. We can not even stop the listener. How the portocol TCP in the Oracle Net will establish the flow of data between servers (how goes the sequence of request and response).
    If the network TCP layer is used to interact between the servers then how data flows between servers; as it uses a port number separated to send/receive data.

    Thank you
    KSG


    Thanks in advance
    KSG

    Published by: KSG October 16, 2011 23:55
    (added the more information about the data flow between the client-server)

    See the "Architecture of the listener" section here:
    http://download.Oracle.com/docs/CD/B19306_01/network.102/b14212/architecture.htm#sthref429

    1. a customer identifies the listener of the tnsnames.ora entry and/or command-line (HOST/IP, Port) settings.
    2. He sends the requested SERVICE_NAME / SID to the listener when it is able to connect to the listener.
    3. the Auditor verifies that he is aware of the SERVICE_NAME / SID (if not, it returns an error "listener isn't aware of service"). 'Consciousness' is inspired by PMON the recording with the listener database and/or the SID is used in the listener.ora file.
    4. once the auditor confirms that such a SERVICE_NAME / SID is available...
    5. He requests the service of database at the table a new process (which you will see as a process of oracleSID on a Linux/Unix server or a Thread in the process oracle.exe in Windows).
    6. it transmits customer information (IP address of the client, Protocol, etc.) in the process.
    7. Subsequently, it is this server process which is the authentication of the user (name of username-password), creates a session and manages all client requests (instructions SQL etc.) and returns the results to the client.
    -The listener is no longer involved.

    Hemant K Collette

  • Data transfer?

    Is to connect your iPad to a computer to transfer data to your iPad another way of data transfer such as an OTG device as a micro SD card?

    Thank you

    Depending on the data type and the application that you use to access this data, you may be able to save to DropBox or dedicated application servers back up (if it is a characteristic of soft offers).

    SanDisk made a series of key USB Wifi active. However, due to the nature in iOS sandbox, there are many limits on what you can switch to the player. Everything happens through the application owner.

  • Assistant (DTA) data transfer transferred some of my Contacts, none of my calendar or Memo files

    When I ran the DTA at 5:30 PM PST yesterday, he said he had picked up ~ 4100 chronogram (Palm Desktop 6.2), with the exception of 20 files of calendar, which was very good.

    On my old Palm device, he said I had ~ 1300 address book records, ~ 2000 Date record book and ~ 850 record Memo. So when the DTA said he had picked up ~ 4100 records, which seemed all right.

    When you are prompted on my pre, I chose to sync my data with Google.

    Immediately after this one-time transfer process, I checked my pre, and there is no record of my old Palm Desktop Contacts, calendar, or PRE memos. I thought that I should wait to see what happens.

    About 7:30 PM PST yesterday, slightly more than half of my Contacts has appeared in Google Contacts section 'My Contacts' (725 total) and on my pre. The same recordings were in Google Contacts and on my Palm Pre. Furthermore, none of my calendar or Memo files had been transferred more to my pre or Google (for the calendar).

    I thought that maybe the data transfer was still running, so I waited all night.

    Since this morning 9:45 AM PST, nothing has changed.

    My Pre and Google seem to have incomplete data:
    -slightly more than half of records from address book Palm Desktop 6.2 made to my pre / Google
    -any of the records in Palm Desktop 6.2 Agenda made my pre / Google
    -any of the records in Palm Desktop 6.2 memos made my pre / Google

    SUMMARY: I'm extremely frustrated. The only thing that I have always enjoyed with Palm devices has been the opportunity to upgrade to the new Palm devices and carry my existing data. The one-time transfer of DTA to pre process is very buggy. Somewhere after the DTA extracts data from my Palm Desktop (~ 4100 records), most of these documents have been lost. It is a horrible customer experience.

    I did some online research, and the author of the following article also fell on a similar problem:

    http://blog.Treonauts.com/2009/06/Palm-pre-sync-solutions.html

    I have tested and verified that when I create a new record on my pre calendar, he gets sync would correctly in Google Calendar and vice versa (new record created in Google Calendar sync does get would be my pre). It is very good for new data. But what of my thousands of existing data records? All these anniversaries, critical telephone numbers, addresses, etc.?

    Before this experience Pre DTA, I've that Palm had their pretty solid synchronization architecture, while the Apple iPhone synchronization architecture (via iTunes) was poor. But at least iPhone na not lose all records along the way.

    So I figured out how to get all my Contacts to load into my pre.

    Initially, I tried to transfer my data using DTA to Google instead of Palm profile. Several times I tried to run the DTA to transfer my contacts from Palm Desktop 6.2 to Google contacts. Whenever I tried to do, at some point, sync Google contacts folders would stop permanently, until all records have been transferred to the course. You can find out how many records have been sync'd to a given pre Contacts by clicking on Preferences & accounts by clicking on the account. You will see the number of contacts.

    So I decided to try to use the Palm profile as the storage for my Contacts and calendar, and all my Contact records (total 1372) was migrated successfully on the Meadow

    The pre now displays contact records in my pre Contacts as I expect: I see the files I transferred over my Palm Desktop. And because I added a Gmail contacts, Gmail addresses friends get "linked" to the corresponding Contacts automatically.

    Summary: my recommendation is that, for the DTA transfer process, you choose to store (backup) your Contacts (and calendar) on the Palm profile. Of course, the downside of this approach is data that has been created on your Pre will not be displayed in Google Contacts and Google Calendar. Of course, you can choose to add your Google accounts on your Pre to your Contacts and calendar, which is what I did. This makes the Chronogram of your Gmail contacts and introduce you to Google Calendar on your Pre. For example, I added the calendar we vacation on Google Calendar. And now these holiday appear on my Pre calendar.

    Message edited by edweirdo 08/06/2009 11:47

  • Slow data transfer between computer and HP Laser Jet 1320n

    I recently bought a laptop with windows 8.1 and successfully connected to 1320n times via LAN and wireless networks. Problem is when I try to print .pdf files, data transfer from my computer to the printer seems very slow and that's why it takes several minutes to print 10 pages. On the print window of my system, it tells me the data to transfer a file from pdf page 14 are about 75 MB.

    My questions are:

    1-is-normal this size of data?

    2. What can I do to increase the transfer speed?

    Thank you in advance.

    H.A.

    Thank you very much for the reply.

    I hae has solved the problem by installing the drivers that are on the product page (I was using the Windows drivers when I had the problem). Everything works as it should now.

  • Sudden slow data transfer

    Hello

    I am happily using my 3 GB Time Capsule for the last 18 months with no problems. I use it almost exclusively as data storage for my Plex server. I use it wirelessly to my Macbook Pro 2014, in the same room.

    Yesterday, without change to explain it, it has become very slow to transfer files to it.

    I am at a loss, as most of the solutions I looked for people who have had problems of speed from the beginning, mine was a sudden appearance.

    Speeds do not seem to affect my streaming quality that I can still watch a 1080 p 5 gb + video file without stuttering or offset. The problem is isolated to the data transfer it seems.

    Any suggestions where to start?

    I use it almost exclusively as data storage for my Plex server. I use it wirelessly to my Macbook Pro 2014, in the same room.

    The plex server is connected by ethernet?

    Speeds do not seem to affect my streaming quality that I can still watch a 1080 p 5 gb + video file without stuttering or offset.

    It would be difficult to know if streaming is more... and more through your Macbook wireless...

    So I just need to know what is connected by ethernet and what is connected by wireless.

    Wireless is seriously affected by a number of things. So I guess that the first test is to connect the laptop to the TC by ethernet and make sure that it works very well. If your ethernet Mac buy a crush on ethernet card... a necessity, in my humble OPINION... as trying to fix wireless more wireless resembles sawing off the branch that which you are sitting.

    If you can determine the network of the question... Then we can do the simple things...

    Run the diagnostics wireless...

    Just restart the entire network, which I am assuming that you tried but did not mention.

    Simultaneous copy of a file on the hard drive while also streaming can also be stressing the TC... If the tests should be carried out without any other use of disk passes.

  • How to calculate the rate of data transfer if I know that the total number of samples/s?

    I'm looking to set a PXI system for measurement of County at high speed, routes, while that controlled remotely via MXI - 4.  How can I be sure that the controller is capable of rapid data transfer quite seen the number of channels and frequencies of sampling provided?

    I think I figured this out, but maybe someone can save me.  For the task at hand, I will have a PXI-4496 and four PXI - 6143 s all 32768 samples/s sampling.  4496 is 24-bit, and 6143 is 16-bit.  Thus,.

    bits of samples/s/channel x 24 16 channels x 32768/8 = 1 048 576 bytes / s

    +

    32 x 32768 samples/s/channel x 16 bits/8 channels = 2,097152 bytes/sec

    =

    3 145 728 bytes/s, or exactly 3 MB/s.

  • Data transfer NI653x

    Hello

    We used the NI6534 card to transfer data from our system in a PC. He works on traditional pilot and DAQmx. We use handshanking calendar for data transfer. Recently, we want to increase the speed of data transfer and need to change the "timing" of the handshake to sample clock calendar (model IO in traditional version). We got it working using the traditional driver, but not by DAQmx. I always get an error code when you try to start the data acquisition. Code error-89129 - Terminal is not valid for the device. Here is C code to configure and start the map:

    DAQmxCreateTask("",&m_taskHandle);
    DAQmxCreateDIChan (m_taskHandle, "Dev3/port0_32", "", DAQmx_Val_ChanForAllLines);
    m_numofSampletoRead = 2000000;

    continue to generate samples up to the stop.
    bRet = DAQmxErrChk (DAQmxCfgSampClkTiming(m_taskHandle,"Dev3/PFI2",20000,DAQmx_Val_Falling,DAQmx_Val_ContSamps,m_numofSampletoRead));
    specify the size of the buffer
    bRet & = DAQmxErrChk (DAQmxCfgInputBuffer (m_taskHandle, BUFFER_SIZE));

    Once he went to configuration and once called the DAQmxStopTask (m_taskHandle) function, he returned this error code I mentioned above.

    With respect to the traditional version, I just added a call to the function below and it worked fine.

    If (!) () status = DIG_Block_PG_Config (m_deviceNumber,
    m_group,
    1, / * enable the generation of model using REQ edge lock * /.
    1, / * REQ - REQ external source * /.
    -3, / * time - base 50ns, it is an internal clock * /.
    1, / * interval REQ * /.
    ((((i16) 0))) / * turn on or off the switch * /.

    Can you help me how to make it work with DAQmx? Thank you.

    Thank you, James. The example of aid. The function I called:

    DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle, "/ Dev3/PFI2", 10000.0, DAQmx_Val_Rising, DAQmx_Val_ContSamps, 1000));

    I missed the first slash highlighted in RED.  I've was allowed past this function call but got stuck at the next function call, DAQmxErrChk (DAQmxStartTask (taskHandle)), that me cheated.

    Thanks again for your help.

  • If possible in DAQ 6009 bidirectional parallel data transfer?

    want to APR DAQ6009 interface via bus 8-bit parallel, but I need to be bidirectional thus stuck at this point since m nt if possible data transfer bidirectional or not

    The 6009 has two-way DIO.

    However, I don't think I would be wasting my time trying to implement a protocol of communication using EID on the 6009 - this is all software timed instead of timed material, which means that your rate will be very slow)< 10="" hz)="" and="" very="" nondeterministic,="" making="" communication="" protocols="" very="" difficult="" if="" not="">

  • making data transfer between two computers

    Hello

    I developed a labview for data acquisition goal program.  I need to run a part of my program in a computer and some said in another separate computer. for data transfer between these two computers, I decided to use the Protocol of data taking. a computer, collect data and send data to the second computer and second computer will control the setting of data acquisition in the first computer. now I have developed the program but it does not work. I wonder if that is enough to link these two PC by a network cable or something needs to be done. of course, I have some problems with the source definition in the Protocol of data taking. need two labview program in two separate computers.

    Best regards.

    the problem is resolved.

    transfer of data from socket, simply connect two computers with a LAN cable, as I did. The problem is the URL parameter. I got the error as follows:

    ==> in main and remote program, the URL must be the same and the computer name that data socket server is running must be incloded in the two URLS. (my mistake was that I had used two different URLS in the main program and remote). either way, I realized that this isn't neceessary to Server execution data socket in the two computer.but that that send data.

    concerning

Maybe you are looking for