Similar Questions

• Satellite M70 - screen does not work properly

  Hello world

  My screen on the laptop does not work correctly. He sometimes starts to white and becomes inadmissible. I followed the problem down, I think of what I can only describe as a fluorescent light ballast in the upper left of the screen (when looking from the front). If I use a clothes pin and apply steady pressure in the upper left corner, it is achievable. That is to say I can still use it.

  But barely.

  When disassemble the screen there is a kind of metal plate on the side of the screen and there is a part called electw f-1 94v-0 coming in contact with this piece of metal. My guess is that the two pieces have shorted or well have become loose such as tightening this part of the screen made it work again. There are discolorations burned on the piece of metal and the underlying aluminum backup that spans the entire screen. There is also a very slight discoloration burned on the play in question also.

  But as I said that the screen still works if I apply the necessary pressure in the upper left corner (currently with a clothes PIN).

  I have no money and cannot pay to have this problem so I have to come with an eraser he togetether solution myself or end without a laptop.

  What is this part? Part of 94v-0 f - 1 of the Electw? It is manufactured by Tyco Electronics, but in a search on their site I could not find it. And Googling shows up nothing important. There are two of these parties behind the screen on my Toshiba. The one on the right and one on the left.

  They are sodered to two sons, one black and one white that goes down to the area of FL Inverter.

  I know it's a long shot, but I wonder what that these pieces don't and if there is no hope for a temporary solution that will alleviate me of having to use a clothes pin in the upper left corner of the screen to get the screen to work. Perhaps by folding the parts to better contact with this or that. I tried to move a party earlier that helped a little but not much.

  It's got so bad that it sparkles now... a little constantly. Very annoying. But... still usable.

  Any input would be appreciated.

  Thank you.

  Carlos

  If the part is attached to the screen, then you will need to replace the LCD screen, or ask someone to fix it if possible.

  You can not buy the different parts of a strainer.

  If you are referring to the wiring harness/LCD screen, then you can buy a replacement at a cheap price. They are not expensive.

• Problem with BearPaw 2400CU Plus Scanner with Win7 Scanner does not work properly

  BearPaw 2400CU more does not work with Win7

  Yes I did, but it has not solved the problem

• constrain the column in dashboard promt with order of does not work properly

  Hi all
  
  I'm having the entity dimension where I need to show the Type and Name.For all the values must be in alphabetical order and name depending on the type of all values must appear in alphabetical order. I have created dashboard quickly with type and name and forced to name. I used sql results to the type and name: Select type of time on the order of 1 and for name: select the name of the time of the order of 1. first time in navigate it its display type as building and name as APAC but that ACPA is not for construction if we select later on the site, then lov for name is correct, even after that, if we choose again building, LOV to name is correct. Can someone tell me why the first time its only shows is not the correct value.
  
  Thank you and best regards,
  Amrit

  Check your not hitting bug 9394568

• Satellite M45 - screen does not work properly

  I followed the instructions at the bottom of this thread by Jimi http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=88964.

  I use Windows XP Home 2002 SP3, Vista then I used Jimis instructions rather than the senior son for Vista. In any case, I used the instructions of Jimi and he fixed the DVD RAM problem - works good as new now, but now my screen is a normal screen, when I have a big screen.
  17.5 inches and it uses a 4:3 ratio and my taskbar are high and when I drag my mouse underneath, just stretches on the graph of pointer.

  Any help would be appreciated.

  The display driver and the BIOS updates, you can get on the Toshiba site.
  http://www.CSD.Toshiba.com
  Download-online portable => Satellite-M45-xxxxx (your model number) online

  In the BIOS update package is a readme text file so first read this.
  The display driver normally also contains text file and there you must start only the file of configuration or installation.

• Login as screensaver screen does not work properly

  Original title - login screen

  My computer goes to the logon screen after only a few minutes when I step away and there is no activity of the mouse or the keyboard.  I want to this full stop

  Hello

  Control Panel/customization, click the line of the screen saver. Clear the check box to display the Welcome to CV. Alternatively, you can adjust the parameters of time-out under power options.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Acer ft200hql touch screen does not work w / HP Pavilion dv7-5000, Win 7 Pro 64-bit

  After searching for and buying touch screen FT200HQL, it does work with my HP Pavilion laptop dv7-5000, Windows 7, 64-bit.  I have the USB cable is connected (even if it says that it is optional in user's Guide - not an option if you want the touchscreen to work).  I tried it with an Acer, Gateway and an another HP Pavilion laptop (all Win 7), & it works perfectly with them, but not w / mine.  All my drivers are up to date.  (Although there is not driver site Acer for the FT200HQL for Win 7 & I don't think that what they have listed as a driver for Win 8 is a pilot).  A Microsoft Search to ensure the compatibility of the FT200HQL compatible shows and there's nothing I should do.  Help, please!  I really like the monitor & don't want to send again, but I bought it mainly for the touch screen feature.

  Hello Jo,.

  Thanks for posting your question on the Microsoft Community.

  I would like to know some information about the problem so that we can help you better.

  What version of Windows 7 is installed on your computer?

  To check the version of Windows 7 is installed on your computer, please use this link:

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  You can then check the hardware compatibility of the touchscreen with your laptop device.

  See this link:

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  I suggest you to update the graphics card, and chipset drivers from the manufacturer's Web site.

  Use this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5051950

  I also suggest you to install the Vista driver in compatibility mode.

  Remove and reinstall this device in the Device Manager. To do this, use the following steps:

  a. right-click on the executable/program of the driver installation file, and then select the Compatibility tab.

  b. click the checkbox before you run this program in compatibility mode for option, and then select Windows Vista from the drop-down list. then try to install the device driver.

  Additional information:

  A touch screen does not work properly after that you resume a computer from sleep mode Windows 7

  http://support.Microsoft.com/kb/2405640

  Windows Touch

  http://Windows.Microsoft.com/en-us/Windows7/products/features/touch

  I hope this information helps.

  Please let us know if you need additional assistance. We will be happy to help you further.

  Thank you

• Problems with my sound doesn't play not even though the settings say that the audio does not work properly

  recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

  -

  -

   

    20

    0

    4

    116

    0

    0 x 800000000000000

   

    3490

   

   

    Microsoft-Windows-Audio/PlaybackManager

    LorrainesPC

   

   

  -

    3

    48000

    fake

   

   

  Judy Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• My sistem 5.1 audio does not work properly when I connect to the internet

  Hello!

  I just bought a Genuis 5005 5.1 audio sistem and I have a problem with him: it will not work properly when I get on the internet (the center speaker does not work).

  I also bought an Asus Xonar DG 5.1 soundcard which works perfectly. I installed and also installed the driver for it.

  When I play music/videos to my hard drive, all speakers work fine, but when I enter the internet videos/Music Center speaker does not work...

  I hope someone can tell me how to solve this problem... Thank you

  Later edit: I managed to solve the problem by selecting the "2 channel" option in my sound card driver.

  I managed to make it work with my audio driver 2-channel. Thank you for your time :)

• volume and the touch screen does not work

  good so we got our a Vulcan mod VTA1005XBM32. Will be that she locked her self so we had reset his tab/pc, but know its volume and the touch screen does not work. see some convo saying to download something, but I don't really know what to look for. Help, please... Thank you Dorothy

  OT:

  my / Tablet PC

  Dorothy salvation,

  Thanks for posting your query in Microsoft Community.

  I don't understand that the volume and the touch screen does not work and I'll be happy to answer your query. These features require the updated drivers for them work. Let me ask you;

  • When was the last time that the two have worked?
  • Remember to no particular change in the device before the show?
  • Since the touch screen does not work, you are able to use the options settings?

  The device requires the updated drivers for the volume and the touch screen. I suggest to follow the methods below and check.

  Method 1: Run the troubleshooter of material and check if that helps.

  a. type in the right edge of the screen, and then click Search.
  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)

  b. enter Troubleshooting in the search box, type or click Troubleshooting, and then press or click on hardware and sound.

  c. press or click on hardware and devicesand follow the instructions on the screen. You may be prompted for an administrator password or to confirm your choice.

  Method 2: Update the drivers

  Step 1: Update the driver through Device Manager

  a. press the Windows key + X , and then click Device Manager

  b. expand driver Sound

  c. make a right click driver, and then click Update driver software

  Step 2: Install the Windows updates pending

  To check the updates:

  1. Open Windows Update by hitting on any fly in the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  2. Press or click check nowand then wait while Windows searches the latest updates for your PC.

  3. If updates are found, tap or click install updates.

     Read and accept the terms of the license and then press or click Finish if the update requires it.

  4. Restart the computer for the updates to be applied.

  Step 3: Visit the website of the manufacturer of the device support and install the latest drivers for the sound and touch to Windows 8 for the same model of aircraft.

  You can also check: touch and pen settings: FAQ

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• My touch screen does not work.

  My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

  The following information is taken from the HT201406 of the Apple KB article:

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  Adjust your settings for tactile 3D

  If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

  1. Go to settings > general.
  2. Click Accessibility > Touch 3D.
  3. Then set the sensitivity of the setting.

  Get more help

  • Find out what to do if your screen does not turn.
  • If your screen is cracked or broken, implemented the repair service for your iPhone or iPad.

• The screen backlight not working anymore on Satellite M

  Hello

  I have a problem with my laptop screen. The backlight of the screen does not work no matter how suspect more and I switch that turns off the screen when I close my laptop is broken.

  When I press the power button and release, a fast and light the backlight flash can be noticed.
  Does anyone have a solution for this so I can fix it myself?

  Thanks in advance, Stephan

  Hello

  I wouldn't recommend trying to fix it yourself if you n t have any experience with the laptop repair and do not be angry with me, but it seems that you don t have this experience
  In this case contact a technician and explain the problem

• Screen does not work on Satellite L775-10F

  I turn on the computer and the screen does not work. Everything seems fine but the screen is all black.

  Nothings happening. I tried turning market and its still does not.
  I also tried to connect to my TV with an hdmi cable.

  What should I do?

  Connect it to the TV and wait until Windows 7 is fully loaded (you will hear sound Win) than trying to use FN + F5 several times. It may happen on the TV Office. Be sure you use the right settings on the TV (HDMI port must be enabled on the right).

  F nothing helps I presume the display can be defective then contact the closest service Toshiba and let them check your laptop.

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• Still 2 WT10 - touch screen does not work

  Sometimes the touch screen does not work or malfunctioning, as does replacing the system and continues. When it crashes I have to suspend the Tablet and wait a bit, sometimes I have to play several times to select what I want. Anyone know what it could be?

  Have a Toshiba Encore 2 WT10

  You said; you have already changed the system.
  What did you change? The ENCORE 2 WT10-A-102 was pre-installed with Win OS 8.1.

  Also, I guess the problem described is related to busy BONE.
  Probably too many applications (apps) as well as the process running in the background and this could lead to short a few drop-outs or performance problems.