in Disqualification 12.1.3, how can I get the reference data "to get the kind of title", "get the kind of name?

Similar Questions

• How can I increase the space of name display in the form, material and specification of the nutritional profile?

  Problem:

  1. How can I increase the space of name display in the form, material and specification of the nutritional profile?

  2. how to increase display space for the name of the sheet in the history section at the top of the screen?

  Thank you

  Hello Nefertari,

  You try to view more characters in these areas?

  Each of these locations is plugable using custom plugin extensions.

  For example, you can go into extensions/config/CustomPluginExtensions file and add the following nodes under the node FormatPlugins.

  I think that the default values for the sites are set to 50 characters, so I had to be up to 100 characters (note NameMaxLength = parameter in the attribute FactoryURL 100).

  It will be applicable to all specifications, if you need something more specific, you will have to create your own class where you can check the type of technique.

  Make your own judgment in what concerns how enough will be the look on the screen after you increase the length to a large number, but you can always control the formatting in your own class.

  See this older post for more information https://community.oracle.com/thread/2562965

  Is that what you're looking for?

  Dmitriy

  .

• How can I change the bookmark/folder names?

  How can I change the name of a bookmark or folder. Focused on aid, I see not a response to this specific problem.

  1. Select bookmarks > organize bookmarks.
  2. In the library window, select the bookmark or folder to rename.
  3. In the name box, change the name of the element. The change takes effect as soon as you click anywhere else.
  4. Close the library window

  Another way to do is with the bookmarks bar:

  1. Choose view > sidebar > bookmarks.
  2. Right click on the bookmark or folder to rename, and then click Properties.
  3. In the name box, change the name of the element.
  4. Click Save.

• How can I remove the 'remember' user names and passwords to sell a computer?

  I'm selling the computer and want to 'clean up', the removal of personal accounts, the user id and passwords that are "saved" on the system.  How can I remove them?

  The best thing to do would be to completely erase the hard drive by using a "safe remove" utility like Darik Boot and Nuke.  If you wanted to be generous, you can then re-install Windows XP and include the installation CD with the computer.

  Most paranoid individuals pleading to remove the hard drive completely, the computer without a hard drive, selling and maintaining or physically destroy the disk hard as you wish.

  If you do not have Windows XP's installation CD, and you insist on the sale of the computer with an operating system, the best thing would be to use the system of the manufacturer of the computer to restore the computer to its "fresh coming from the factory" State.  Usually, this is done by using a hidden partition on the hard drive.

  There are 'file shredder' applications available (you can search for them), but the problem with the deletion of files and folders individual - even if the removal is made with a tool that prevents the recovery data reasonably - is that you never know if you managed to root out all your personal information.  In particular, you probably will not be able to assume that the registry of Windows was completely "sanitized."

• How can I know the FULL domain name & names for the installation of a digital certificate Public in ISE?

  We are implemented a project with Cisco ISE; but comments Portal appears to users as a "untrusted site". For problems, a public digital certificate must be installed in Cisco ISE, so he can send it to users who enter the comments Web portal.

  Now... to sell me the certificate, VERISIGN needs to know settings ISE of the certificate, such as name of area COMPLETE, names subnames, etc... How can these parameters of ISE?

  Thaks a lot!

  This isn't an easy question to answer, there are a ton of variables to include

  Local web site Central Web Auth or Auth

  LWA, the WLC is the "man in the Middle" to the request of the customer for PSN (server nodes), the WLC takes the request webauth and resembles webauth then the redirect URL that you put in the WLC

  If the redirect webauth URL is https://ise01.mycompany.com:8443/guestportal/login.action, the WLC is a redirect but the virtual IP address comes in 1.1.1.1, who was as trustworthy or redirection complains, then you may have to get the public certificate for the fqdn of 1.1.1.1, and the comment server. You can create a CSR using openssl or you can just enter in ISE and create a CSR, but you can only set CN = ise01.mycompany.com and nothing else, as long you have a single NHP is good, but if you have several Ssnp, you need to change your CSR so that you have to use openssl to create CSR using a file openssl.cnf and then with openssl, you do the following:

  openssl req - new - nodes-out openssl.cnf omf-01 - ise04.csr - config

  You must do it the way I said above regardless of CWA or LWA, if you have more than one PSN, you must point to a FULL VIP domain name and then configure your DNS to answer for these host names. With LWA, you get virtual IP WLC involved 1.1.1.1, so you don't have to worry about getting a certificate for this, it is a cleaner installation, but you must always do all the rest. It must ensure that users of your guests have the opportunity to join the portal comments and be able to solve the given DNS the dns server that they have been configured with.

  Content of the file openssl.cnf:

  [req]
  nom_distinctif = req_distinguished_name
  req_extensions = v3_req
  default_bits = 2048

  [req_distinguished_name]
  countryName = name of the country (2-letter codes)
  countryName_default = en
  localityName = name of the locality (for example, City)
  organizationalUnitName = organizational unit name (for example, section)
  commonName = Common Name (eg, YOUR name)
  commonName_max = 64
  emailAddress = Email address
  emailAddress_max = 40

  [v3_req]
  keyUsage = keyEncipherment, dataEncipherment
  extendedKeyUsage = AutClient, serverAuth
  subjectAltName = @alt_names

  [alt_names]
  DNS.1 = guest.mycompany.com
  DNS.2 = guest.mycompany.com
  DNS.3 = ise01.mycompany.com

• How can I copy the list of names of files in the finder and set the Clipboard filenames separated by commas?

  Hi guys, I was wonder if anyone can give me a hand with a script.

  I need to be able to paste a list of file names of the files as follows:

  0001.jpg 0002.jpg 0003.jpg 0004.jpg

  At the moment, if I select the files in the Finder, copy to the Clipboard and paste them in TextEdit, they are like this:

  0001.jpg

  0002.jpg

  0003.jpg

  0004.jpg

  I found a similar but slightly different script and I don't know how to change it. Here it is:

  Define extension_list to {"jpg", "" JPG","jpeg","JPEG"}

  the value cbNames (Clipboard text) paragraphs

  Set csvNames to {}

  the tid value delimiters to point to the text of the AppleScript

  the text value of the AppleScript point delimiters ".»

  -now, make a list of names without extensions

  Repeat with the names in cbNames

  If the point 2 of the text names is extension_list then

  copy of text 1 of names at the end of csvNames

  end if

  end repeat

  Journal csvNames

  -now the filenames as comma CONCATENATE string separated

  the text value of the point delimiters AppleScript «»

  csvNames value cross-as text

  the text value of the point AppleScript delimiters tid

  There is an easier way. Open a TextEdit document and paste the list in. Place the cursor at the end of the first item and drag it to the start of the second.

  

  Press on + command + c to copy and then command + f to bring up find it. Press command + v (do not click in the first search field). Check the 'Replace' box, click in the field replace, and then type a comma and a space.

  

  Click 'All' and then 'done '.

  

• Adding dynamic text; How can I stop the projection variable name?

  I create a simple game for children.  On the first page, I added a "text input" field for his first name.  I called the firstname variable.

  When they move to the next page, I used a 'text dyanamic' field so I can call by name on this page.  This works.  However, when I test the game, on the first page, where the first name is entered, it shows the _level0.firstname instead of just a blank for them to enter their name.

  I know I've fixed this in the past and it was something simple, but I don't remember how to do it.  I would be grateful to anyone who helps!

  Thank you.

  do not assign a variable name for the textfield object. or, at least, do not use the same name of the textfield variable and instance name.

• How can I change the suggested user names?

  When I connect to one of my frequently used web pages I get a proposed username is irrelevant to this page. How to change or remove the username suggested?

  Follow these steps to delete the recorded data (form) in a drop-down list:

  1. Click on the (empty) input field on the web page to open the drop-down list
  2. Select an entry in the drop-down list
  3. Press the DELETE key (on a Mac: shift + delete) to remove it.
  • http://KB.mozillazine.org/Deleting_autocomplete_entries

• Firefox 4 for MAC: How can I sort the bookmarks by name that are not in the files?

  Solution in site and forum, Firefox does not work on Firefox 4 for Mac, i.e. Control View-Sidebar-bookmarks, etc.

  All the Favorites are in folders.

  • The Bookmarks Toolbar folder stores the bookmarks that you see on the (view > toolbars >) Bookmarks Toolbar.
  • The bookmarks Menu folder stores the bookmarks that you see in the menu bookmarks and create via ' bookmarks > bookmark this Page "or" bookmark this link "in the context menu.
  • The Unsorted Bookmarks folder stores which inserts created bookmarks by clicking on the star on the right end of the address bar.

  You can right click on a such main folder (root) to sort the bookmarks in that folder.

  You may need on Mac:

  • http://KB.mozillazine.org/UI.click_hold_context_menus
  • http://KB.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
  • SortPlaces: https://addons.mozilla.org/firefox/addon/sortplaces/

• How can I delete the previous owner name?

  My brother bought a used computer from a store.  Previous owner's name is all over the computer, and I would like to remove it.  They do not appear in the accounts, but they appear otherwise.  Is there any method to completely remove the name of the previous owner of the computer other than to do a factory reset?  Down my stuff back here is not an option for me, and I lost a lot too try to get saved.

  Unfortunately there is no easy way to accomplish what you want.

  I always recommend a factory to anyone who buys a used computer. You never really know his State unless you do.

  You can get more by creating a new user account (this is a new account administrator) and set up the way you want, and then delete the original account.

• How can I change the file extension name in bulk?

  I have files in a directory named like this:

  TEXT. File1
  TEXT. File2
  TEXT. File3
  .
  .
  TEXT. File100
  and I would like to change them to this:
  File1.txt
  File2.txt
  File3.txt
  .
  .
  File100.txt
  Is it possible to do so.  I can't do work ren and or http://www.bulkrenameutility.co.uk/Download.php seems to cover it.
  Someone at - he of the ides?
  Thank you

  Hi Halasz,

  You can get what you want to use, for example a/l FOR command from the command prompt:

  • [Win] + X
  • Command prompt
  • CD /D drive:------DirectoryWhereYourFilesAreStored
  • Type of / l %G in (1,1,100) @If are TEXT. %G Ren TEXT in the file. File G % File%G.txt, and then press [Enter]

  Notes

  1. Respect the %G everywhere capital elsewhere, the command will fail. If your decide to use "%g" instead of "%G" and then use "%g" everywhere for the same reason. You can also decide to use another letter...
  2. If you have more than 100 files replace the parameter appears in bold with the appropriate value.

  There is necessarily a way to do something smarter, but it would take a little thought and a batch development. Not sure whether what you need at the moment.

  More information

  If you want to know more about ordering, visit this page.

  Hope this helps at & meets your needs. If, so be sure to mark your post as answer, so this can help others... Thanks in advance.

  See you soon

  LZ.

• How can I know the Essbase database name in Hyperion 11.1.1.3

  Because when I connect to the FDQM and set the name of the database Hyperion, Idk, what is the name?
  So he gives me error.

  Ask your apps team for what is the name of the database. Or if you have access to Essabse simply log on and see what are the databases under the application target. If it's a planning application, it will be the same as the name of the plan types.

• How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  Settings > Notifications > Messages > display on the lock screen

• How can I disable the voicemail transcription service?

  How can I disable the function of transcription of voice mail on my iPhone 7 more?

  Hello

  Go to settings-accessibility disable voice.

  See you soon

  Brian

• How can I get rid of the widgets screen?

  Since the upgrade to iOS 10, a widget screen when I start my phone.  How can I get rid of this sort my identification of access/contact code screen appears when I turn on the phone?

  Thank you.

  With iOS 10, if you see the widget screen by sliding the lock screen is normal and how the new iOS.  It is more action 'slide to unlock' available in iOS 10.

  To operate the unit and go directly to the password entry screen (if you are using a fingerprint recognition), press the home button twice.

  In iOS 10 from the lock screen, are the only gestures by scanning

  1. slide from right to left to bring up the camera

  2. slide left to right to bring up the widgets screen (from the widget screen, swipe down to search for).