In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed.
In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed on a second PC. Where's the info of the scale which is held?
Hello
Once you have built your VI and compiled into an executable file and deployed on another machine, it essentially becomes a file read-only, which means that you will not be able to change the balance in this deployed application.
Kind regards
Marcus
Tags: NI Software
Similar Questions
-
I can't install adobe creative cloud app on my new Mac Pro desktop.
When I download the app and try to install it, adobe says that the application has been damaged, then starts all over again.
What can I do to fix this?
joke
Try to perform the steps mentioned on link below
"Failed to install" error Creative Cloud Desktop application
-
I can not activate a virtual XP machine. the virtual machine is a clone of a pc that has since been erased. the original machine was probably activated with an OEM key. I tried activating by phone and putting our license key of Volume without success.
I would be grateful for any suggestion.
Thank you very much
Heh!
The key to the report is an OEM_SLP key, rather than a Volume key-
The key of COA_SLP supplied with the original computer cannot be used to enable this virtual machine either, because he reuires to use on the original material.
You can not use a license upgrade for the virtual machine, because there is no base license - so you are limited by the terms of the Windows license using a retail for Pro license, and then upgrade which (if necessary).
The key here is most likely another valid - but installation is almost certainly classified as non-authentique, due to the presence of the multitude of the OEM.s in the BIOS - unless you use XP Mode in a Win7 machine
-
Hi community, Im trying to make my first apk with Adobe Flash (it's a file very easy) and this error is apperaing all time;
I changed a lot of options in "Android application" but it does not work. Can you help me?
Thanks!
This is just a warning. You can ignore it.
-
How can I remove icons for programs unibstalled of the control panel "programs and features"?
Icons FRO uninstalled programs still appear in "Programs and features" of the control panel. How can I remove them?
Hello
Icon/program which you are referring?
To work on the issue, refer to these methods.
Method 1:
Check out the following link to start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeCheck if the problem persists in safe mode. Display the results.Restart the computer and boot to the desktop normally.
Method 2:
Run the fixit from following link to confirm if the program or the application has been uninstalled correctly.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_UninstallSee also:Troubleshoot installing or uninstalling programs
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programsUninstall or change a program
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Check if it helps. -
I had to reformat my Macbook air to update the operating system OS Sierra
with everything deleted, I am trying to re-download my adobe photoshop cs5 extended... I downloaded successfully the dmg, but the guest of installation inside it will not work warning saying 'Install' cannot be opened. you must eject the disk image.
then when I click on the? It is said
authorization of the application has been revoked
There may be a problem with this App. Although the application has been signed by an identified developer, revoked the certificate for the app and it cannot be opened.
check with the Mac App Store or the developer of the software to see if there is an updated release of this app.
so I talked to someone on the chat to adobe but they say they don't provide support for the current version products and told me to talk to Mac... Then I talked to Mac and they told me to ask if adobe has a compatible version for OS Sierra... went back to adobe they gave me icon apple steps - system preferences - security and privacy - blocking - click on download from anywhere - unlock - it did not work and they said the problem is that I use a beta version of the software (Sierra) that's why the error shows and that the solution should have said fixed operating system has not been started and is not tried and tested... I'm going to my version is not beta, because they have officially launched yesterday... and told me to ask adobe to publish an updated version that works on the Mac Sierra...
of course, none of them have helped...
Anyone have any ideas?
I'm not good with computers, software and my head is about to pop, last resort's downgrade to the operating system that I used before... to run cs5 coz I need it... unless someone has a solution pls... Here's all the details... Sorry for the test
Hi, I think I might have a solution, I'm busy now installing CS5 premium on a new installation of sierra, but will let you know if there are problems! I had the same problems as Britz00, very frustrating!
After I had run the patch to allow 3rd party applications will be installed, (in a terminal such as suggested by K Perkins) instead of a double click on the installer in the terminal I dragged the exec 'install '. by opening a Terminal window and which seemed to work? (open the "Adobe CS5 Design premium Installer", then right click on the 'install' folder and click on "view the contents of the package in the menu drop-down down that pop-up, then double-click the"content"folder, then double-click the"MacOS"folder.") The exec 'Install '. file is the one that I dragged by opening a Terminal window) hope it makes sense. (Sorry, I'm terribly inept to explain technical things in computer)
-
My phone was stolen recently while I was at Walmart. Sprint located the phone 4 hours later (after saying earlier that they could not do it at all) and sent a message to inform him that had the phone that he had been located. The phone was found at Walmart soon after. When I got the phone back, I noticed that the phone has been restored to the factory settings and the password has been changed. I restored the phone myself using iTunes, but now I'm stuck on the activation screen because they put their iCloud account in my phone (I never put one up myself, not knowing that this would cause this kind of problems) and I do not know the password. I've lost all the photos of my son (he was two weeks previously and I had not copied to my computer yet) and voice messages, I have saved my father who died last year. And now I have a rental phone that costs me $60 / month, that I can't use. Sprint said there is nothing they can do. I called Apple and received no help from their part is there something I can do?
It requires the Apple ID and password of the thief. If you don't have it and can't get it, then the device is useless to you.
Find my iPhone Activation Lock
Check in the future first before you buy second hand: How to check for Activation lock before buying a second hand iPhone.
You can take it to any Apple Store with the proof of it being stolen and that your are the original owner. They may be able to help. If not, then you will need get a new one or pay for a replacement by a similar remanufactured unit.
-
I have a samsung laptop with windows vista. and IE 9. I downloaded the software from amazon, but when I stopped and try to connect then I find that my laptop will not start. so I try to get back to samsung and they fix it so that I can connect, but then I find that the software has been deleted and I don't know why. can anyone help
Hi elsie,
As you mentioned you did a factory restore using the Samsung recovery disk, it restored the computer to factory settings & finally deleted the application from your computer.
You can redownload the application & install it.
Reference: Install a program
Hope the helps of information.
-
I get a message that says that the application has failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. I used this link to email for 2 years and NOW I can't in my email and all my saved folders.
Hi KathyHendges,
1. What mail client do you use?
Step 1:
You can try clicking with the right button on the link and select run as administrator and check.
Step 2:
This error code can occur due to corrupted Microsoft Visual c++ installation.
To resolve this problem, you can install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:
Download and install Microsoft visual C++ from the below mentioned link:
Package redistributable Microsoft Visual C++ 2010 (x 86)
Package redistributable Microsoft Visual C++ 2010 (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867
For more information, you can consult the following link:
Hope this information is useful.
-
Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?
Use the Acrobat Pro preflight!
To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:
(1) the fonts in question are installed on your system and
(2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.
-Dov
-
Where Iget can help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).» I don't know where to go or how to solve this problem. It started to happen after I went to the office 356 and uses Windows 10.
Please see the troubleshooting provided in this KB doc steps: fix damaged document error when opening PDF files
Let us know if you still experience the problem.
Kind regards
Meenakshi
-
I had to reboot my system and then to install my ACC, I used the same product key (redemption code). However, the system says that the code has been used. Anyone can teach me how I can use the same installation code to download VAC. Thank you in advance.
Download/install the desktop application, connect and install applications subscription.
https://helpx.Adobe.com/creative-cloud/help/download-install-app.html
Creative cloud to desktop
https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html
Sign out, sign in | Creative office cloud app
http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html
Install, update, or uninstall applications
http://helpx.Adobe.com/creative-cloud/help/install-apps.html
-
I installed Photoshop. But it was a misstake. He has been lying to install ID and have only. I want to uninstall the Photoshop. Can I do it myself?
Hello
You can uninstall Photoshop by reference not to the following link
-
Hi all
How can I prevent the text fields and drop downs changed after the form has been signed using a digital certificate? Thank you.
There is also a checkbox on the dialog box 'Sign' to lock document after signing.
-
I just bought edition Creative Cloud schoolgirl and her teacher and the payment has been successful, but it seems that I can only download a free trial for the entire application?
And I checked the FAQ, it says that "no serial number is required for membership or subscription plan products such as Creative clouds - the student and the teacher.» Simply sign in with your Adobe ID to activate your membership. »
However when I tried to login with my ID on Adobe Application Manager, he always says that it can't find the order and suggest me to buy a.
I really wonder how I can work through this?
Please see the links below.
- Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
- Applications creative Cloud back in test mode after an update until 2015 for CC
Also, make sure you use the right adobe ID to log in.
Hope this will help you.
Kind regards
Hervé Khare
Maybe you are looking for
-
Progress bar of logo and gray MacBook Pro Apple.
MY MacBook pro is not terribly old. Not more than 3 years is not new. It has the apple Logo and underneath is a gray progress bar. It loads thar bar take some time, then just stops almost as some laptops do when they update anywyas what I need help w
-
How can I put a new password in my computer because I have a virus
I have a virus in my computer and I was told that if I change my password it will be gone so I did
-
I just did a software update in El Capitan 12.11.3 on my macbook air and now can not connect to my computer. My profile is here, but it will not recognize my password. I can log in as a guest, it's how I use it now.
-
HP Envy 14 t: HP Envy 14 Palmcheck
Hello I want to be able to play games on my computer but my palmcheck does not let me. Whenever I want to go and move around and at the same time be able to look around, there is a delay between the two. I thought it was because of my palmcheck setti
-
Setup / uninstall no longer works
I am running Windows Vista Home Premium, 32 bit, the pk 2 on a Dell XPS 410 PC service. I recently downloaded "SpeedUpMyPc" and now wish to uninstall it. After clicking on this program in the folder programs, by clicking on the button uninstall, I