In the reports, decimal symbol must be ", 'no'."

Similar Questions

• The report generation tool must Office?

  Quick question: the Report Generation Toolkit (V1.1.3 for LV 8.6) should Microsoft Office installed to be able to create Word documents?

  I have a need to create reports, preferably in Word format, but the target computer cannot have the reader on your computer, office.

  Yes, you need office.

• Why Captivate do not let you type decimal places outside the reporting points?

  If I have 15 questions on my test, how much is each question is worth. You can't enter decimals as points in the reporting section.

  Help, please. Thank you

  I understand that, but the points and percentage must not be the same.

  15 questions, 10 points each.  maximum number of points is 150.  100% = 150 points.

  The questions are always also weighted, you can specify a percentage of pass/fail, so let's say pass is 80%.  80% of 150 is 120, which is 12 correct answers in the example above.  Or if you use the value of the pass/fail point, you can set it to any multiple of 10 up to 150.

  Am I missing something?

• Calculations in the report script

  Hello
  
  Im running the script next to the report
  
  ----------------------------------------------------------------------------------------------------------------------------------------------
  ESS_LOCALE English_UnitedStates.Latin1@Binary
  {SUPALL} {NAMESON} {TABDELIMIT} {ROWREPEAT} {NOINDENTGEN} {SUPMISSINGROWS} {7 decimal}
  
  < SupShare
  
  < row ("Account", "Period", "Money", "Years", "Version", "Script", "Employee Type", "Grade", "Title", "Entity", "POP", "Position", "Used")
  
  "All the pop.
  "All employees".
  "PKR".
  "All stations".
  "All FTs.
  "FY10" "FY11.
  "All notes".
  "Any type of employee.
  "Current basis".
  "Working version".
  "Jan".
  'AK_COM_001_202 '.
  
  < DimBottom account
  !
  -----------------------------------------------------------------------------------------------------------------------------------------------------
  
  and im getting the following output
  
  MBP Jan PKR FY11 work Version common to Base any employee type all ranks of all AK_COM_001_202 FTs all appears all the Positions of all 2277578.1989396 employees
  House rent Jan PKR FY11 work Version common to Base any employee type all ranks of all AK_COM_001_202 FTs all appears all the Positions of all 1024910.1895228 employees
  Monthly Bonus PKR Jan FY11 Version current basic work any employee type all ranks of all AK_COM_001_202 FTs all appears all the Positions of all employees 0.0000000
  Commercial Jan PKR FY11 work Version common to Base any employee type all ranks of all AK_COM_001_202 FTs all appears all the Positions of all 585012.2216499 employees
  
  
  I want the last column (which displays the amount) divided by 1000000 without creating a new column or row. is this possible?
  
  Any help is greatly appreciated. Thank you.

  imran_311 wrote:
  The purpose of this calculation must be able to extract the data divided by 1000000 to push into an Oracle table and then pushing another data base of essbase.

  Simply divide in Oracle, it will be much simpler.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• My computer guard shut down, and the report said "panic."?

  The computer stops regularly without promting, then automatically restarts after a few seconds. The reports said the word 'panic', as well as a bunch of stuff I don't understand. Much obliged for any suggestions as to what may be the problem.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Run another module after the generation of the report before TestStand ends the execution

  In my application after that TestStand generates and saves the report, I would like to initiate a stage to send a flag informing that the test is complete and the report is saved. How do I get there? The report is saved at the end of execution of TestStand.

  I don't want to On-the-fly reports because I don't like the information during execution. On-the-fly reporting, also saves the report at the end. I would like to save the file and then sent indicator. It is fine if the results of the stage to send the flag are not saved in the report.

  Hi Sumit,

  You can change the sequentialmodel.seq itself as indicated in the document that you referred. (process template customization).

  After reminder Post USE in the "TestUUTs" sequence that you can add your custom steps that will search the report exists and that the flag.

  The path to the report file will be in the local variable as shown below. (full runtime).

  "Locals.ModelPluginConfiguration.Plugins [0]." PluginSpecific.RuntimeVariables.PerSocket [0]. Path. "

  Generally, please copy the model of process changed in the equivalent public folder with a new name.

  User can select this new process model in the menu set up--> stationoptions--> model tab.

  Your new process model must be detected automatically if you copied into the right directory public and restarted TestStand.

  I hope this helps.

  Ravi

• How to customize the scroll and symbols bars in a multi column list box

  Hello

  I have recently been design FP and have gotten to a scroll bar in a multi column list box.

  How can I change the decals and colors of the scroll bar as I can't seem to change or select all components of it within the control editor.

  I would change the arrow buttons and arrow the cursor with a custom sticker and have a solid track. In adition to that, I would like to change some of the symbols or add my own custom in the existing list.

  Is this possible to do?

  carbon32 wrote:

  Hello

  I have recently been design FP and have gotten to a scroll bar in a multi column list box.

  How can I change the decals and colors of the scroll bar as I can't seem to change or select all components of it within the control editor.

  I would change the arrow buttons and arrow the cursor with a custom sticker and have a solid track. In adition to that, I would like to change some of the symbols or add my own custom in the existing list.

  Is this possible to do?

  I don't think that you can customize parts of the scollbars.

  Here how to add symbols to a listbox control. The new index of symbols must last for 41 as the indices of standard symbols are included between 1 and 40. The size of your custom symbol must be 16 x 16.

  

  Ben64

• Where to put "DataLayout" (2D data in the report)?

  Hello

  IM using 2010 SP1 Teststand and Labview 2011. My question is about the plot of the data of the 2d tables in HTML Teststand report.

  I try to retrieve a table 2D x - y measurement data and it intrigues within the report file. Unfortuntly data is interpreted as "multiple-O", which means that each XY pair generates a new curve in the plot instead of have a curve following the x - y pairs. I found the following in TS documentation:

  http://zone.NI.com/reference/en-XX/help/370052J-01/tsref/infotopics/measurement_data/

  The problem is: I do not know WHERE to set the attributes of the property. Does anyone have a snippet of code running as an example defining the attributes at the right time and by generating a x-y-field correctly?

  Thanks for the help in advance.

  lv4ever

  lv4ever,

  I have consulted the documentation and I agree that it is not clear where the attributes must be added. I'll write a bug report for this problem.

  The approach recommended for you is to create local variables that have the appropriate attribute and use these local variables in expressions of value for each parameter.

  I have attached a files updated with the proposed solution.

  Concerning

  Anand jegou

  National Instruments

• Security settings do not allow execution of script code in the report.xsl stylesheet

  Hello world

  I can't open a file of XML in Excel 2007 results - even if I added the stylesheet for trusted locations and deleted all the protections.

  Here's what happens:

  1. open the XML results file how I am propmpted for select the report.xsl stylesheet TestStand

  

  2. then gives error: Scripts in this XML document and/or references to other documents are disabled.

  

  3. by clicking OK gives more specific information - namely the security settings don't allow execution of code within this stylesheet script:

  

  But I did the following:

  -The path to the sheethas style was added to the "trusted locations".

  -ActiveX settings are completely enabled for all controls without restrictions

  -Macros settings are enabled for all macros

  -Is trust access to the VBA project object model

  -All data connections are allowed

  How can I activate the execution of script code in the style sheet for the file XML can load?

  Thank you

  Ronnie

  Ronnie-

  Directly from the Article in the Microsoft Knowledge base, please note that do the following changes "may make your computer or your network more vulnerable to attack by malicious software such as viruses." It's always a good idea to make a backup of your registry before editing. This can be done by clicking on file' export.

  In any case, as the article explains, open the registry and navigate to HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Security. The security file must contain a registry key called XSLSecurityLevel. Mine did not have this registry key and I had to create it (see screenshot below). Double-click the XSLSecurityLevel registry key, type 1 in the data value, and then click OK.

  You should now be able to view the XML from Excel 2007 report. To reset this setting, simply double-click the registry XSLSecurityLevel key, enter 0 in the given value, and then click OK.

  

  I hope this helps!

• How can I set the margins of the report?

  Hello

  I try to print a portrait of a JPEG image that was created by a façade by program.

  I print it out by creating a Standard report.

  While the JPEG image is very good, the printed image is compressed on the long edge. So the printed image is a bit distorted.

  I change the property of printing: margins of the vi to the First Call of vi, but the result is the same.

  However, if I open the JPEG image with software such as Picasa and print it, the print image is not compressed or distorted.

  I am attaching a picture of the code that is used to print a picture that shows the property print and JPEG format: margins.

  How can I print it correctly via LabVIEW?

  Hi nikosfs,

  So I took a quick glance to your question a little more, and unfortunately I have not found a solution that meets all your needs. I was able to improve the appearance and the size of the HTML report by changing the entries in registry key for Internet Explorer print settings. You must do this because the HTML report printing settings refer to these registry keys rather than the margin you settings set in LabVIEW. I went ahead and linked to the Microsoft support article below. These registry keys will not only allow you to change the default margins, but they will allow you to remove the header and footer. However, I wasn't able to get the HTML report to print to the pdf printer I had installed as you mentioned. Another method, that you can use to print the image on the front is through the nodes property of the Report.VI reference and invoke. The property for this VI reference node to set the print margin and the parameters of the header. Then, you can use the invoke node to print it. However, once more, using this method I was not able to print successfully in a pdf file either. It seems, therefore, that if you want to print to PDF with precision, the ideal solution would be to use a Word report type since the standard report has the bug I mentioned earlier. You can monitor the status of this bug using the CAR # 49253. I would like to know if you have any other questions, I apologize that we were not able to find an ideal solution for your needs.

  http://support.Microsoft.com/kb/236777

  Paul M

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• How to disable", or delete the"reporter"on the request of encryption screen?

  Original title:

  BitLocker

  Does anyone know if it is possible to 'disable' or delete the "reporter" on the request screen encryption?

  Hi Natheem,

  When users log on a computer that must be encrypted, they receive a notification that their computer will be encrypted. They can select request Exemption and postpone the encryption by selecting future releases or start accepting the BitLocker encryption.

  For more information, refer to:

  http://TechNet.Microsoft.com/en-us/library/dn145014.aspx

  To get help after the question on Bitlocker TechNet forums:

  http://social.technet.Microsoft.com/forums/en-us/home?Forum=mdopmbam

  Hope the helps of information. Please let us know if you need help on this issue or any problem related to Windows.

• Notepad does not accept the figures or symbols

  I tried to use Notepad, but when I try to type of digital or other symbols, they will not be displayed. What's wrong?

  I just tried it on my Windows 7 Home Premium 64 bit laptop, and it worked as expected.  If you use the numeric keypad, you must activate "num lock", but if you use the number keys at the top of the keyboard, all the numbers and the symbols above them work very well for me.

  As an alternative to Notepad, you could try Wordpad which is much better for text processing, anyway.

  Good luck.

• Refresh the report after download

  Hello. I have a page of interactive report with the download button (2). I have an another page (3) which has the same interactive report as page (2). When you click on the download button in page2 is downloaded the report of page3. What I need now is, once the report is downloaded,the interactive report in page 2 must be updated. I tried different ways but failed. I it again in the apex oracle workspace. Any help is appreciated. Thank you

  
  

  Details of the workspace:

  Workspace: XXKIRAN

  USER name: kiran28. [email protected]

  PASSWORD: kiran0425

  App.Id:47917

  Hi Mencis

  Change the button action of defined by the dynamic Action.

  Fix the two dynamic action on the button

  (1) execute JS

  apex.submit('DOWNLOAD');
  

  (2) update the report in the region

  I hope that solves the problem

  Concerning

  Mahmoud

• Gets the number of records in the report based on the input of the user on the date and the number of days.

  Hello

  I need where there are quick dashboard that selects the date, second interval column consists of >, <, = and the third column is seen number (in days)

  for example, the user enters: 12 18, 2015, <, 9. here I report who should get the data (records) 9 days earlier from the date specified (from 12/10/2015 to 18/12/2015).

  Similarly for > =.

  How to get there. I'm unable to write the script and I use the column date in my report. Ask that you please advice how to solve this problem.

  Please find below the screen for reference.

  

  Kind regards

  Chandra Khalil.

  Hello

  Not exactly why you're doing the report this way. If the user must select, basically, a period of dates, would not easier to have a column of data with a between the operator and the user would select 2 dates (upper and lower intervals)?

  In any case, it is possible to achieve what you want to do as a result of your approach. You could use when's CASE and have a more complex filter, but I think that it is better to have a few nested filters where you use the range operator to determine what date filter that you use (see image below)

  

  Some notes about my filter. First of all, I am making the assumption that the operator is "=", then the number of days specified must be ignored and you just return the data for the selected date. You will notice also that in my filters, I got a cast so far, but if you are using a column that is already a timestamp so it won't be necessary.

  This should achieve what you want.

  See you soon,.

  Pedro