In the reverse order to print on HP Deskjet 2540

Similar Questions

• HP Officejet Pro 8630: Reverse order of printing pages

  The driver for the HP Officejet Pro 8630 does not support reverse Page printing order.        Y at - it a new version of the driver in development?       Is there a workaround approved by HP?

  @dsolver,

  Welcome to the HP community

  I read your message want to order back print of your Officejet 8630 and are looking for a work-around. After combing through some messages of the forum here, I found a post from @Bob_Headrick that I would say check and try it might work for you.

  Here is the message: Re: Cant Reverse Print Order HP Officejet PRO 8630

  I hope that helps!

  If you found my post has helped to achieve a solution, click on the button accept as Solution below and thumbs up button to send me a 'thanks '.

  

• Update for iOS 15.0.0 is poster Arab annotations in the reverse order / how downgrade to the previous version that worked correctly

  Hello

  Update for iOS 15.0.0 is poster Arab annotations in reverse order

  How to move to the previous version that worked correctly

  the text of shot isn't one Arab readable because it is from left to right (it's in the correct order when writing, but once click reverses)

  Thank you

  Hello

  This problem has been fixed in the new version 15.0.3 in the app store.

• HP Deskjet 2540: Problem printing with HP deskjet 2540

  Hello world.

  I need assistance with my printer. Sorry but I am not English native language so I hope you will understand everything.

  I have a HP deskjet printer and Windows 8 2540.

  The problem is that when you're printing suddenly stops printing. But if I try to print single pages, it prints again.

  When it stops print anything in the print queue as if she have all the.

  It usually occurs with the PDF file.

  I tried to search on the hp support page and I followed the instructions about to disable the printer spooler because maybe can give problem while printing, I did it but when I tried to print again the computer give me a message like this "If you want to print you need to install a printer" but it is not uninstalled the printer, its status is "ready to print".

  Can you help me please? Because I do not understand, and he is not the first time that the printer give me problem while printing.

  Thank you and sorry for my bad English

  Viviana

  @ViviHika

  You are welcome.

  Unless you disable the print spooler service, it will restarts when you then start / restart the computer.  In almost all cases, it is a good thing.

  You can find the startup type control:

  Control Panel > display icon > Administrative Tools > Services >

  Services opens > defiler scroll down, find the print spooler > right-click on print spooler click >

  Opens properties > startup type: > select from the menu:

  • Automatic
  • Automatic (delayed start)
  • Manual
  • People with disabilities

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  You can, if you wish, change the options in the print spooler > Properties > recovery tab

  One of the most interesting Print Recovery options: restart the computer

  • Restart the computer may be initiated at the first, second, or one point of future failure.

  "Restart the computer" (without the clearing of the PRINTERS folder) can be used to stop and restart the spooler then (at startup).  The restart procedure could allow 'stuck' print jobs to resume printing.

  The option "Restart the computer" could be useful in a situation printing is a main function of the computer and the printer is supposed to work without supervision / outside normal office hours.

  When you configure the "Restart the computer" option, you can enable "actions for stops with errors."  For example, you can send a message to the computers on the network, which indicates the computer will be restarted within a certain time.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• convert a docx 200 page pdf document but the file is displayed in the reverse order. Difficulty please?

  I converted a document of 200 pages Word docx to PDF. PDF resulting excellent except the fact that the document now bed (and pages) in the order reverses. This is my first attempt and I hope there is a simple solution if the product will be of no use to me. Can someone help please?

  Of the Print Options tab dialog box > reverse the order of the characters is enabled.

• Takes the Top 10 sales people in the reverse order.

  Hello
  
  I'm running on 11.1.1.6.0 on Database 11 g OBIEE 11 g.
  
  The current scenario is:
  
  I have four columns that is to say: 'Sales Person', year, Dollars and RANK ($).
  I sort descending first year then $.
  I have this selection created on the output results:
  Then, continue to only members of the 'Clients '. "' Sales Person ' for Top 10 based on 'SalesFacts '. «"$", For: year: "1998.00', ' 1999.00'»»
  
  with the 3 points above. I am able to see the top of page 10 'Sales Person's for the year 1998, then the same "sales people" are listed in 1999, but with different classification.
  
  The report now need to reach is that:
  
  I need to have the top 10s 'Sales Person' for the year 1999, then same "sales people" should be included in 1998, but with different classification. Basicall a bit chronologically reverse what is be shown above.
  
  Thank you
  srik.

  Hi srik,.

  I think that your condition could be achieved in this way

  1 create a new measure YAGO-Dollars using the AGO() and the time hierarchy.

  2. in your report, include another column called "previous year rank" with the function as RANK("YAGO-DOLLARS").

  The steps above would you get $ for the year 1998 for the same type of sale and you could put him too.

  I hope this helps.

  Thank you
  Diakité

• When I connect, I seem to have lost a file. They seem to be hiddeen or deleted in the reverse order Alpha. What can I do?

  Since 28 March when I finally backed up my c drive, I noticed twice more that a file will not everytime I connect.  Don't know if it has been hidden or deleted.

  I use ESET professional and scanned my system, but nothing has shown up. I also Secunia who reported something every day on commissioning a file called Python 27 is patched and deleted every day again the possibility since March 28. I have looked for this file in programs but do not see it.

  Does anyone know what I might have bug and how to get rid of.

  Thank you very much.

  Peter

  Hi Peter,.

  1. the problem persists with a specific file?

  2. What is the record?

  Method 1: Check if the files are hidden.

  Show hidden files (Windows 7)

  Method 2: Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Good day!

• When I ry to convert a word in a PDF pdf doc out in the reverse order?

  How can I fix the opposite problem of page?

  Hi MANNING RUBIN,

  Please let me know if this problem occurs with a specific or all files.

  You can try to connect to "https://cloud.acrobat.com/convertpdf" using your Adobe ID and password to the export of word to PDF.

  Let me know how it goes.

  Kind regards

  Ana Maria

• Add a maximum of added following reverse order of selection 12.4

  In all cases if not see this? Select a few songs to add to the next game, they get added in the reverse order.  It worked the way we should expect 12.3.

  Play the next still work correctly; Add several song and added to until the next in their order in the selection.

  I see that here. Just to be really irritating place next window is too narrow to show it happened with classical music where the number of movement is some way down the title.

  What a pain.

• Display data in reverse order.

  Hi everone,
  
  I'm dispalying two fields in forms 10g to display Arabic and English chracters.
  It will correctly display Arabic and English data, but for some Arab data, he demonstrated in the reverse order.
  
  How can I solve this?
  
  my location is
  11.2.0.3.0, charcterset AR8MSWIN1256 Oracle database
  Server of applications Oracle 10 g, NLS_LANG = AR8MSWIN1256
  Order Developer suite 10 g
  
  
  Thank you
  Omer

  I got there is character '_' chr (220) in the folder that is not Arabic characters is why oracle does not display data correctly. I have replace the data as replace (Field1, chr39). Chr (220) | Chr (39)) and now it works for me.

• Change the sort order on film

  For some reason any my sort order in my film is mixed up.  It allows to sort by oldest date to last date.  Is there a way to change this?

  Thanks for any help in advance!

  Scott

  Switch to grid mode in the library module. If the toolbar under the grid does not appear, type "T". When you have a toolbar, make sure that it has a tool of "Spell" on this subject. (If she is not there, click the triangle at the right end of the toolbar and choose "Sort" from the list).

  Now click on the text to the right of "sort:" on the toolbar, then choose "capture time. Make sure the a / z has 'a' high on, or your fate will be in the reverse order.

  HAL

• Clip loading reverse order?

  I have a component in my library which is a miniature. Well the thin just inside is a code to load a thumbnail jpg file.
  Here's the situation. I use a loop for to add a series of these linked clip displayed on the stage. All of same clip, the path of thumb and various pos FLF is pass to the clip as a parameter. The question is how the burden of the clamp. They appear one after the other, but the load order is reversed. The last one added to the timeline is the first loading a ti and display follow each other and so on. If there is a loop of 10, 10 and 9, 8, 7 clip load...
  
  Why? Is it as LIFO of Java concept. Last in first out which Manager flash it?
  
  Thanks for your help.
  
  I know that I can put the reverse order and attached the last of them on the stage first and so on, but I understand the problem, do not have a work around... ;-)

  Yes, maybe they start to load to closely. There are several images, never great, a few thumbnails. The size of each is approximately the same. I did the test online. Even if on the computer, it might be different, the real test is online.

  Maybe I can use the ' for in ' GWD says or any simply begin with the last element and then to I-. Well I'll try it.
  Tanx for your help both

  HO, also, thank everything in the ' for in '. I didn't know that it worked this 'Stock' way first, and it can be useful sometimes. I appreciate your help!

• All-in-one HP Deskjet 2540: delete at the request of print job on a deskjet printer MAC OS 2540 x 10.9

  How can I delete a regular print job to a 2540 MAC OSX 10.9 deskjet printer.  I can pause, but may not know how to remove it completely.

  Hello @annetrumbo,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with removal of a print job in the print queue for your all-in-one printer of HP Deskjet 2540 on your computer Mac OS X 10.9. Can I please you follow the steps below.

  1. click on the Apple icon in the upper left corner of your computer screen

  2. click on System Preferences

  3. click on Print & Scan

  4. click on printer Deskjet on the left to highlight

  5. click on Open Print Queue on the right side

  

  6. in the print queue window, click the print job you want to delete. Then click on Remove in the top left corner. Once the print queue window is clear, you will have a nice clean slate for your printer.

  Please let me know if this procedure works for you. Good luck!

• HP Deskjet 2540 All In One: Unable to print color?

  I have a Deskjet 2540 brand new all-in-One. Printer is delivered without any instruction manual. How to print color? I hit 'print' of my document and it comes out in black and white. When I type on the printer, the 'color' button, it draws just a piece of paper through the unit and nothing is displayed at all. I do not understand this crazy thing. My old printer didn't need me to tell it to print color or black and white, that he knew what was coming through the system. I'm about to make this thing.

  Thanks, actually it would print test print color, just not when I tried to get a print document in color. new printer, new cartridges. Change my selection of the printer of HP Deskjet 2540 2540 Deskjet series just seemed to settle, I don't know why. I just mention it here in case other Mac users have the same problem.

• HP Deskjet 2540: Laptop requires password for wireless printing

  I have the printer wireless Hp deskjet 2540 series. It works well with my Ipad... but today, I tried to use it with my computer laptop it is asking password. I don't remember if I created a password. now can u tell me how to do this.

  Hello.

  On the control panel of the printer, press and hold the button wireless live () for 3 seconds, the printed sheet will include the passowrd for the printer.

  Kind regards

  Shlomi