In video mode shutter speeds

Similar Questions

• Shutter speed too slow AV mode for sunrise timelapse (low light)

  Hi all!

  First, I'm a bit embarressed to ask this question because I am sure that its entry level but stuff I posted in several other forums to establish what is the problem im trying and I now reduced to a simple question... I think so..

  I'm trying to shoot a timelapse of the sunrise. At dawn when the unit is in AV mode, due to the low light it seems be frezzing up when I go to take a picture. I realize now its not freeze until his tusing simply a shutter speed to compensate for the lack of light.

  The problem is, I see a lot of tutorials of timelapse of Sunrise, and they all recommend using AV mode because of the changing light conditions.  (I had to use manual mode with a small opening in the end and to halfway through once the Sun rose my photos were all horribly over exposed)

  How can I combat the problem of low light in order to use my camera in AV mode for photos with 4 second intervals?

  At the moment I can't use it at dawn because the shutter speed slows down so that it does not make a timelapse.

  Any comments would be massivly appriecated.

  Thank you!

  OK, let's go.

  AV and Tv are really semi-manuel exposure modes.  You are setting the aperture or the shutter and waiting for the camera to select the oppisite.  If you have selected an Av which requires a shutter speed too long to take the correct exposure, you will get very long shutter.

  You can up the ISO, or select a larger BC.

• How to change the shutter speed in program mode camera DSC-hx20v

  I want to change the shutter speed in programming of DS DSC-hx20v mode. or fix known fix shutter speed. Someone help me.

  Hi chasta.

  Camera will automatically adjust mode program auto, shutter speed, and it cannot be changed manually. You can adjust only in manual shooting exhibition.

  If my post answered your question, please mark it as "acceptable Solution".

• SONY NEX 5 - problem with setting of the shutter speed shutter priority mode

  Hello

  I strictly followed the instructions in the manual, but when I'm in the mode S (shutter priority mode), by the rotation of the wheel there is no change in the shutter speed and I don't know why.

  On the screen, above the wheel icon is written Tv.

  Please, advice me how to solve the problem. In that I'm wrong.

  The same situation that I have and with the Apperture mode.

  Thank you!

  HI ILesishki,

  I apologize for the inconvenience that was done to you. Let me see if I can help. I suggest the initialization of the device to its default settings to solve the problem. Just click on the Menu button, then choose Setup. Go to main settings and look for reset default. After the reset, turn the camera and see if the problem is still there.

  If so, I suggest to send the camera in for service. I recommend that you visit our Sony Global Web site for more information on contacting the Sony's Support centre in your area to http://www.sony.net/SonyInfo/Support/.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• In the shutter priority mode returns only white/bright images with shutter speeds

  When I put my camera DSC-HX60V for priority mode on the shutter, and then select a shutter by more than a second, every image I just take I gives a completely white, you can´t see anything other than white.

  The shutter speed, the more white.

  It doesn´t matter what environment I try this, inside, outside, light, dark etc... Well as it s a little better in darker situations.

  As soon as I increase speed (from a second 1 "), the apperture icon will begin flashing.

  I ve tried to refocus and all that, but I can´t seem to take a photo without zoom and 'shutter speed of 30 seconds.

  I guess that it s me some thing wrong, but then I need advice, I bought the camera because I want to shoot the water falling with the 3 to 30 seconds shutter speed, but it does not work good for me.

  Anyone want to help a noob?

  shutter 1 "even a very small opening in the light of the day you will give a light exposure, no matter what you do. You could try an ND filter if you are looking to shutter speeds more. The way in which the work of shutter priority is changes the size of the opening to try to get the right exposure, and it may not do everything within the limits of the lens.

• Cyber-shot HX20/HX30V - the shutter speed setting

  I am unable to what anyone slower 1/4 second value my shutter speed (in manual mode). I should be able to reach a speed as slow as 30 seconds.

  I can adjust the ISO setting (currently fixed at 100) and I can set the aperture and I can set the shutter speed to the faster speeds of up to 1/1600 of a second - setting a slower speed that 1/4 of a second escapes me.

  Any ideas?

  Hey, you forget.

  I did a complete reset and now it works as advertised.

• Shutter speed of DSC-hx20v

  How did resolve you it?

  Hi Ron,

  Welcome to the community of Sony!

  You can increase the shutter speed by setting the camera in shooting mode manual exposure. For detailed information about manual exposure shooting are mentioned on page below:

  http://eSupport.Sony.com/docs/dvimag/DSCHX20V_HX30_HX30V_guide/en/contents/02/03/05/05.html#l2_manua...

  Please indicate the only accepted such solution if you find the information useful.

  Thank you for your message.

• How can I change the shutter speed on my Sony a37?

  While I'm on the Auto program my shutter speed is not the right number I want to. I do not know how to change it and wonder what to do?

  In program auto mode, the camera automatically determines the combination of speed and the appropriate scene shutter opening. If you want to use a specific shutter speed, it would be best to take pictures in the priority shutter (S) Mode. Please set your mode dial on S and then spin the front dial to adjust the shutter speed.

  If my post answered your question, please mark it as "accept as a Solution.

• Someone had problems with the shutter speed on the Canon 70 d?

  I've used a Canon 60 d which was brilliant! My husband bought me a 70 d at Christmas as a surprise. However, I have problems with the shutter speed. In automatic mode, everything is fine but on manual, Av, Tv etc I seem to be unable to change the shutter speed of a very slow release. I want to know if the unit is defective somehow, or if there is something I should be doing that I'm not. Please can someone advise/inform me what I can do wrong or if it's something I should take with Canon?

  First of all, you need to reset your 70 d to the factory settings. Check your manual for more information on how to do it.

  You can't troubleshoot anything until you are zero squared.

• EOS Rebel T3 shutter speed does not not even on Auto

  Hello community Canon!

  I didn't know really how title this problem, but I'm absolutely stumped. So recently my EOS Rebel T3 has been really act. As either the mode I am on (automatic creation, no Flash, etc.), with the exception of the manual mode, the camera will be whatever all black or all white. This is due to the camera to take photos either 1/4000 or 30 "shutter speed (even on auto mode!) I don't know why he chose only those extremes for shooting, I turn in any light. Any thoughts?

  Elrond140

  First thing is to reset the camera to factory settings.  Cancel all the settings, remove the battery from the day to the next.

  Then, you must make sure that the battery and charger will not function properly.  It is basic, but to do.

  And finally get a NEW SD of high quality which is fromatted by the camera, nothing else.

  Try again, with the camera on the green square and go outside with a good daylight.

• SHUTTER SPEED ON DSC-H400

  How can we change the speed of hutter on Sony DSC-H400 in order to take better pictures of moving objects?

  Set mode S to control shutter speed (and having the camera automatically adjusts the opening and ISO), or M mode to fix everything manually yourself.

  I believe that the H400 has these modes, do not remember.

• Slow shutter speed

  I have an a99 and I wanted to set the shutter speed to for more than 30 seconds, but I can't do it, even in manual mode. Help. Thank you very much.

  The A99 motorway has shutter speeds selectible of 1/8000 to 30 seconds, over the bulb. If you want to set the shutter speed to something more than 30 seconds, you must use the parameter B (bulb) and push the button for the desired exposure time. You can do this by physically holding the button, or you can use a remote control or an intervalometer.

• How to activate video mode 640 x 80 on Satego P200?

  Hi all

  an old game, I need the video mode 640 x 480 x 8. Unfortunately, I can not select the video mode using catalyst for Satego P200 with an ATI Mobility Radeon HD 2600. Is there a way to activate video mode?

  Michael

  Hi Michael

  What century is this game? ;) What is the name of this game?

  Be a little realistic. If this is not available, how you will put on the regular way?

• Why is my Nex Vg30 camera blurry when his photo and video mode on (goal no. join)

  Why is my Nex Vg30 camera blurry when its video mode on mode and photo. There is no lens mounted and I put the settings to "shoot without aim" and his still fuzzy. Just got my camera in the mail today.

  I have a lens on it until this last week. I have the lens Sel1855. I can zoom in with the lens ring and will get the clear picture but when I perform a zoom out or zoom in all the way the image is blurry and doesn't let me get out the clear picture zoom one where I'll ways half in the zoom on the lens.

  The only way I can shoot and get a clear picture would be if I have the lens half of means until the Terminal 35 on the lens. I want to be able to get the full picture like when I do a big on mine, rather than by zooming in on the zoom button.

  The problem I have is that when I shoot with the lens being always half ways out of the 35 marker, I always need to be a bit far from the talent or what I was filming and it causes fair gene to myself. Also audio are heard a little more than what it should because of the way I place myself because that the lens won't let me not get enough close due to the lens fades when I do neither turn the zoom ring.

  Is that what the camera has something hidden, maybe I have to set up?

• enumerate the video modes to drop-down list

  Hello people,

  I noticed the vi IMAQdx enumerate potentially useful video Modes.  I would like to use it to dynamically fill a menu ring / list box (according to what would be appropriate, but I think it is supposed to be a menu ring so that the output is 32, which is the entrance from the IMAQdx "VideoMode' property) so that I can hang a different USB camera and without having to fill again manually in all modes.  I tried to understand what a typedef is and how to make the output of Enumerate vi work with this node property, but without success.  Photos detailing my current vi and the incompatibility of data type are below.

  ZOB

  MY VI:

  

  COMPARISON OF DATA TYPES:

  
  

  Issues of the order of the elements in the cluster.  In one case, you first digital, in the other, you first need to chain.

  You pass by your table and rebundle these elemetns in the right order.