In Vista, it is possible to find and replace a specific name that I used many files on the hard drive?

Similar Questions

• I am trying to-rInstaller Snow Leopard of Yosemitie. I made a mess of it and now it tells me that it is impossible to disassemble the hard drive

  Can someone tell me how to remove Yosemitie and reinstall Snow Leopard. I made a mess of it. I keep trying to erase the recovery disk, but do not know how. There is no data that I need to keep tro so free it please tell me how to re - install Snow Leopard in the simpleset of simple terms for a person aged 85, can understand it. I am very familiar wih Microsoft and regular of the PC.

  Boot from the Snow Leopard DVD by pressing the C key during a reboot or by holding down the option/Alt during a restart, the DVD. Once started, open utility disk, go to the tab clear, select Mac OS X extended (journaled) format with Option GUID. Erase the hard drive. When you are finished, install Snow Leopard. Once completed, restart normally and set up your account using Setup Assistant. Then use the update from the drop-down list below to update to10.6.8. Run the software update until there is no updates.

  If you want to save some of your existing data, copy what you want an external hard drive before proceeding to the foregoing.

  10.6.8 combo update

• lack of start up programs, did a search and all the files on the hard drive, just not where they belong, running windows xp with sp3, any help would be appreciated

  all programs and files on the hard drive just not here where they belong, on windows xp with s p 3

  Hi tessagourden,

  1 have you tried all of the suggestions listed in the previous post?

  Add the previous suggestions, you can also try the system restore to the point before the attack of viruses and to check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• just formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded

  I formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded. .

  Probably, you need to boot in the BIOS of the computer and changed on the hard drive in IDE mode, SATA, so it can be recognized by Windows XP.

  Before that you plan to replace Windows 7 with Windows XP. Have you tried to familiarize yourself with the operating system first?

  http://techingiteasy.WordPress.com/2009/08/19/for-the-former-Windows-XP-user-welcome-to-Windows-7/

  If you want to run Windows XP, you can consider to dual boot Windows 7 and Windows XP. You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

  How dual boot Windows 7 and Windows XP
  http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/

  With Windows XP installed first:
  http://notebooks.com/2011/02/17/how-to-dual-boot-Windows-7-and-Windows-XP-Part-2/

• How to install Win7 on new hard drive and still access all the files from the hard drives of previous Vista?

  I currently have a Windows Vista PC. It has two SATA drives, one with the operating system, the one I use for storage.

  I want to buy a new SATA hard drive and install a new copy of Windows 7 top.

  I want to know the steps to follow to do this. My plan is this:

  1. turn the pc power off and open the case.

  2. remove the old hard disks

  3. plug the new empty hard drive

  4. turn on the pc and the insertion of the disc to install to Win7 for DVD-ROM drive

  5. enter in the bios and put the DVD-ROM as first boot device

  6. install win 7 on new hard drive.

  Is this correct?

  Because my next question is important:

  7. Turning off the computer.

  8 reconnect the two old hard drives. New total number of SATA drives connected = three.

  Now when I restart the PC and login to Win 7, it lists two other drives as, for example, D:\ and E:\ readers?

  How can I make this work?

  Thank you very much!

  Thanks for your reply, but I don't want to dual boot. I just want to have the hard drive as the master drive Windows7 and the old two drives as slaves, where I can access files as the pictures and letters.

  Any help would be appreciated!

  Well, I would disconnect all drives hard current interns, then connect the new hard drive, reinstall Windows 7, re - attach the old readers as slaves and copy all the data you need to on the disc of Windows 7.

  See:

  How connect a SATA Hard Disk as a slave . eHow.com
  Single, master and slave drives and Jumpering

• XP is not start properly, important data files on the hard drive, location unknown such as e-mail addresses, individual emails and favorite links on Internet Explorer. The system is damaged irreparably, what is the solution?

  I need ideas to solve this problem.

  You can retrieve the data without being able to get into Windows. The methods described require a certain level of computer skills. You know yourself best, and if a better course of action would be to take the machine to a local professional with a good reputation instead. If you choose to do, do not use a type of BigComputerStore/GeekSquad of the place.

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it- http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• We try to upgrade Vista Home Basic on an Acer Windows 7 but cannot because there is not enough space on the hard drive.

  We try to upgrade Vista Home Basic on an Acer Windows 7, but does not because there is not enough space on the hard drive C. I have another drive that is empty, hard drive called D data and will not go to it. What I can do. I just spent $ 125 for this upgrade.  Thank you

  original title: try to upgrade to Windows 7

  Hello

  you are posting in the wrong forums

  These are some Vista Forums

  You can read this information to see if your machine is compatibile Windows 7 and repost in the correct Windows 7 forum (link below)

  so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• Windows DVD Maker DVD I made has all the VOB files and I need my JPG files that I used to do (lost laptop hard drive)

  My sister-in-law stored a bunch of pictures and some movies on a portable player and she came to my computer.

  After inserting a blank DVD by clicking the promt to make a DVD using Windows DVD Maker, we now have a great slideshow and it includes pictures and two videos.

  now, I want to use the jpg to a diferent app photos and she lost the portable hard drive that she used to create

  Is it possible to 'come back the jpg' of the 'film' this DVD maker made? There is nothing else that VOB files now but I know that the JPG is somewhere... Laughing out loud

  My sister-in-law stored a bunch of pictures and some movies on a portable player and she came to my computer.

  After inserting a blank DVD by clicking the promt to make a DVD using Windows DVD Maker, we now have a great slideshow and it includes pictures and two videos.

  now, I want to use the jpg to a diferent app photos and she lost the portable hard drive that she used to create

  Is it possible to 'come back the jpg' of the 'film' this DVD maker made? There is nothing else that VOB files now but I know that the JPG is somewhere... Laughing out loud

  ==================================
  Long message... I hope the info is useful:

  VOB (as you know) is the DVD video format.

  You can not convert video to a format of photo as
  .jpg and retrieve your original images. And...
  None... copies of original source files are not
  archived anywhere on the DVD.

  A method (and probably not near what you)
  hope) would be to make the screenshots
  (capture) video. The resolution and
  sharpness of the capture will not equal
  the originals.

  The free VLC Media Player can read your
  VOB files.

  VLC Media Player
  http://www.videolan.org/

  For the installer for your screen Capture... Open VLC and
  Reach... Tools / Preferences / video button / video
  Instant image section.

  In the directory field... Search for and select a folder
  to save your captures po (for example... you could
  Create a new folder on your desktop and select)

  TO... Prefix... check the box... Sequential numbering.

  TO... Format, choose JPEG or PNG.

  Finally... on the left, click on the Save"" button.

  Now... Play the video and pause by pressing on your
  SPACEBAR when you see a screen you want to capture.

  To capture the screen... type...  SHIFT + S

  Press space to advance to the next photo...
  ect... etc...

  A possibility may be 'Solution B' in the
  next article:

  "Excerpt from photographs of wedding DVD videos.
  for printing.
  http://labnol.blogspot.com/2007/02/extract-still-photographs-from-wedding.html

  Word to the wise... If you use a software that will
  extract frames from the video... be aware that thousands
  photos can be made and you can fill in all
  your free space until you realize.

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Is it possible to find and replace the index/Exhibitor in a PDF document in Acrobat?

  I'm trying to convert a massive PDF file into a Word document, but sup/exhibitor is spoil the conversion.

  
  

  Specifically, each instance of "CO2" (w / index) in my PDF eventually cut the sentence in various phrases/lines in the converted .docx.

  
  

  If I could F & R all the CO2 w / index in: CO2 with or without index, my problem would be solved!

  Michael

  There isn't really such a thing as subper/index in PDF format. There is just a text of different sizes on different baselines. So, I like the ingenuity of your idea, but I don't think that he can fly.

• Is find and replace - possible to find a page without instruction?

  Is it possible to search all my pages in a site and find out all the uneducated (for example without the word 'cats') is it possible to find and replace the functionality? for example to apply a negative?

  Thank you

  It is indeed possible, providing some text is inside a tag any.  It could be in a list, title, paragraph, div, etc...  Use of the Research: specific tag option.  See screenshot (excuse the sloppy image).

  

  Nancy O.

• Find and replace in activePage

  Hello

  Is it possible to find and change in a particular page? In other words in the current page only? I need to find some double spaces in particular page and replacing it with a space. It doesn't effect other spaces double pages.

  app.findGrepPreferences = null;     app.changeGrepPreferences = null;

  app.findGrepPreferences.findWhat =' ';

  app.changeGrepPreferences.changeTo = ' ';

  app.changeGrep ();

  Thank you

  K

  It's the current page:

  my page = app.windows [0] .activePage

  To find text on this page, you will have to search through all of the blocks of text on this page. To look inside groups as well, get allPageItems, then treat text blocks (untested):

  frames = myPage.allPageItems;
  for (i = 0; i < frames.length; i++) {
    if (frames[i] instanceof TextFrame && frames[i].contents.length > 0) {
      frames[i].changeGrep();
    }
  }
  

  Peter

• Help to find and replace. Please

  I imported a text where there are in italic content original, but when put in IDCS4 italic text appears as _italic words_. It is under the Roman name with _ of the characters who surround him. Is it possible to find and replace. Needless to say that the text between the _s varies.

  I would like to try a find/change GREP searching (_) ([^ _] +) (_) and replace them with $2 all change to italic formatting (preferably in a character style).  This translates to seek a _, then everything that is not a _, followed of another _ and replace it with the content between the two. You can also use (_) (. +?) (_) that match the srting more runs between two characters _ in the same way (except it does not cross a paragraph break), but it will run a little slower.

  Credit for this should go to Peter Kahrel and his excellent introduction GREP...

• Find and replace the part of a url in the menu

  I use a tesing server and have all my links in the pop-up menus that are linked. I'm about to go live and you want to substitute the name of the test server with the new true site name. Subdirectory names, and the page will be the same, just the domain part evolves. Is it possible to find and replace it in the world, or do I have to go into my png and redo every single link?

  You did your absolute links? Why?

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "EVN" wrote in message
  News:e64uf9$7LP$1@forums. Macromedia.com...
  > I use a tesing server and have all my links in the related pop-up menus
  > to
  > it. I'm about to go live and want to replace the tests
  > server
  > name with the new name of the real site. The subdirectory names and page
  > the
  > even, just the domain part is changing. Is there a way find and replace
  > This
  > in the world or what I have to go into my png and redo every single link?
  >

• The powerful ' find and replace ' features are missing pages

  It would be good if the development team of Pages read the questions and the problems posted on the apple Support communities.

  Find and replace invisible characters (tabs, returns, etc.) have disappeared in the Pages for older versions.

  Other researchers suggest that the functions are in the NON Apple software. Duh. TextEdit not more and not pages. Disappointing, can not describe the feeling.

  The new Apple:

  "He Just (not!). Work' and 'where's the Hell... ».

  There is that one thing I use 5 Pages for: drawing, which can be fun in its limits. As a designer, I like he is aligned with the alignment that makes things very fast for me. Unfortunately, other sucks.

  Pages ' 09 is pretty horrible at drawing but great for the layout and productivity. The contrast between the two is remarkable, when I switch between them. If only I could have 5 Pages, in Pages ' 09 drawing tools, I could happily mix 5 Pages completely and be totally unaware of anything that does not work or works so badly she may as well not exist.

  2016 is coming with the editor of affinity, I hope it turns out as well as the designer of the affinity and Photo of affinity, but doubt that it will be the combination of WP, PAO and spreadsheet that makes Pages ' 09 so awesome to work with.

  Peter

• Computer HP Desktop M1188A upgraded the HARD drive and memory upgrade possible

  Hello

  I have a HP Desktop M1188A running XP Media Center 2005.  The computer runs very slowly and was only 27.6 GB of free space left on the hard drive with a total area of 149GB.  It has 512 MB of memory installed a 4 GB maximum.  Speed supported is PC3200 MB/sec.  Type of DDR.  DIMM slots 4.  160 GB 7200 RPM SATA hard drive.  Fact hard drive 160 GB 7200 RPM SATA means it is a SATA connection?

  I want to switch the HARD disk like this I hope that the computer runs faster.  I'm a complete novice with respect to the operation of computers.  What to buy to upgrade the HARD drive?

  Will it also upgrade the installed memory?  If so, what to do?

  Everything I need to know?

  Thank you.

  See you soon,.

  Michelle

  Michelle,

  Try for battery HP to THE Bing search engine, I found several sites in line with the Chargers and batteries. BattDepot Australia seems to have decent prices... At$ 24.49 for the loader and THE $37,49 for battery. If you have not yet checked the HP battery reminder page, I recommend you do this first.

  Frank