In vSphere 5.5 customer web, when you add a new HARD disk, cannot create as thick.  Gray disk provisioning.  No one knows why this happens?

Similar Questions

• Can't see vmdk file when you add a new hard drive to an existing vm

  I'm trying to attach a vmdk file that was recovered from a backup as a new hard drive to an existing test VM (version of the vsphere 4.0 client). I was able to successfully download the file in the data store but it is not available to select when I try to add a hard drive, on an existing virtual machine. The vmdk file has been recovered from a backup server no idea why I can't see it would be very appreciated

  Something does not fit here.

  Since the file names "...-0000003..." this seems to be a delta (snapshot) rather than a virtual disk of dish (base)! Thanks for posting (tie) the hard header file to see how it looks like and to know what lack us.

  André

• How do you download music on your RCA easy rip when you get a new hard drive?

  How do you download music on your RCA easy rip when you get a new hard drive? When I plug my mp3 player it is not do anything but wonder about stuff that's already on mymp3. I want to download music does not stuff that is already perfect?

  Hello

  1. How do you try to download music?

  2. that you get an error message when downloading music on the MP3 player?

  Click on the following link to synchronize the media player with your MP3 player.

  Set up a device to sync in Windows Media Player

  Hope that helps.

• Button with a presentation table of radio when you add a new line

  I have a column that I use as a Y/N flag. I would like to make a group of buttons on the form when the user adds a new record. I use a tabular form, but it seems that it is not possible to use a type of radio for a tabular presentation element group.
  
  Am I missing something? Is it possible to use a group of radio buttons to an item when you add a new record on a tabular presentation?
  
  Thank you
  Reid

  Hello

  use the HTML for this in the attributes

• When you add a new site, Keychain prompt for all existing sites

  With 2015 CC update, when I add a new Dreamweaver site, as soon as I hit him "done" once all the ftp information is entered, I get a prompt Keychain for each existing site, I saved in Dreamweaver: "Adobe Dreamweaver CC 2015 wants to use your confidential data stored in 'Sitename-SiteServer 1' in your keychain. You want to allow access to this point? »

  I was well with crossed the first steps, assuming it wouldn't ask me once again, but he does. Every time.

  By clicking on 'Always allow' vs. 'Allow' does not seem to do much, but I don't want to test it a lot because I have to go through 80 + sites every time to see if it changes anything.

  Any experience with this? Is it a thing of access door key or a thing of Dreamweaver?

  The note of the problems at the FTP credentials won't be remembered is NOT my problem. All credentials are stored; I can switch between all sites without problem, or any guest. This happens only when I add a new site.

  Any help would be greatly appreciated!

  Dreamweaver CC 2015

  Screen Retina MacBook Pro mid 2012
  Yosemite 10.10.3

  This will help to get rid of it helps Dreamweaver | Set up a test server

• I decided to do a clean install of windows 7, but when the disc it stops to extend windows files 0% I do not know why this happens is the drive.

  Original title: Windows 64-bit clean

  Ive recently done my 2nd attempt to install windows 7 64 bit and ive met the same problem, I have formatted and deleted all the data ln my drive hard amd decided to do a clean install of windows, but when the disc it stops expanding windows files 0% I don't know why this is happening is the disc

  You have all the features non-essential connected to the computer during installation? If you have external storage media connected, disconnect them.

  It is also possible to reinstall your Windows 7 media is corrupt. You can try to download a new copy and try again.

  How to: What are my options for Windows 7 reinstall media?

• Interactive report uncheck filter when you add the new filter

  Y at - it all possibliity to uncheck all filters that are already defined in an interactive report when you create a new filter?
  
  My first approach by adding a dynamic action that is bound to the search field:
  
  key_down = event
  jQuery Selector = #apexir_SEARCH
  scope = live event
  
  The Action contains:
  $('input:checkbox').attr ("checked", false);
  
  At present, there are 2 problems:
  1. when the user presses 'go' or 'enter' the check box is checked again when the result is displayed
  2. If a filter is defined when the search box is not used, it does not work

  Hi Oliver,.

  too many problems I think. You can try to hack any POST message, analyze it, and if it's p_widget_action = FILTER stop action and interfere with an AJAX to APEX_UTIL call. IR_FILTER or IR_RESET. After the AJAX request was returnd (synchronous), you can start again the original MESSAGE that defines the new filter.

  Hmm. sounds to me like you'd better ask the customer if he is willing to pay for this kind of convenience.

  Greetings from Germany from the North,
  Andreas

• How you can uncheck "digitally sign messages" when you add a new account? I don't want to use it.

  When I try to add a new account (or even to modify an existing account) "Digitally sign messages" is checked by default and it is not accessible to uncheck

  I check through all my accounts and they have no tick signatures. you were previously signed emails to get the value in the first place?

  Now, I assume that you have no e-mail account that you want to digitally sign messages.
  Go to the menu (alt + T) tools > Options > advanced > general and type in the search box

  sign
  

  You will get a list of entries below, including the .sign_mail of mail.identity.id# where # is a number

  Each account has a number, but are you not signing mail then put all on false is not a problem.

  find one that is set to true, right click and select toggle.
  Close the configuration editor once your done and restart Thunderbird.

  If you sign mail on an account, you will have to go back to the latter for account settings and turn path on any that you have bad out here in the configuration editor.

• Remove 'default' text characters when you add the new object text (label)

  Is it possible to create a new text object without characters 'text' on the inside?

  In addition, when you convert a rectangle to the text object, you the characters 'text' on the inside. Can you do empty by default?

  Tarek

  Hi Tarek,

  The text object is defined in a Text.xfo file, on my system, it is under C:\Users\BR001\AppData\Roaming\Adobe\Designer\10.0\EN\Objects\Standard.

  You can find the location by looking at the properties of the Group of the library of Standard objects;

  

  You can also create your own widget, set it up on the design finds out how you want and right click then 'add to library' (option has moved, but that's what SS3).  But I don't think you can get your own ones will appear in the drop-down list when you try to convert objects.

  Bruce

• Failed to get the disk partition information when you add the new data store

  Hello

  Update my ESX to version 4 Update 1 (4.0.0, 256968). Now, I'm trying to add a new data store to a cluster in vCenter and receive the following error message when I will review the current structure of the disc "error when configuring the host: failed to get the disk partition information. When I click back, then next, there's no error message but in the formatting window, I get the error "Object reference" not set to an instance of an object.

  I see this question has been asked before, but I can't seem to find an appropriate response. Anyone? The interface using CLI instead of vCenter isn't an option (alignment VMFS, workload and so on)

  I use Dell R900 with an EMC Symmetrix VMax SAN

  The size of the LUN I want to add is 741 GB

  Concerning

  Marius Aulie

  If you have a virtual machine for Windows test, you could do the following, to ensure that the logic unit number has a clean partition table:

  -set the LUN as a GROSS physical to virtual machine device

  -Run diskpart, select the drive and run the CLEAN command

  -detach the LUN to the virtual machine

  -try to create the data on the LUN VMFS store

  The size of the block of the data store where the VM test can be a problem with the above. Due to the size of the LUN, the size of the block of the data store must be at least 4 MB. Attach the LUN to a physical test system could be an alternative.

  André

• How to prevent scrolling when you add a new row of datagrid?

  When I addItem to the minion of dataprovider to a datagrid, the datagrid control scrolls automatically to the new line added. Can someone tell me how to prevent scrolling happening, in other words, how to focus on the current line without scrolling of new line. Thank you.

  I didn't know that this was the default behavior.  Anyway, you can save the

  verticalScrollPosition and restore it later.

• How to set a default in an ADF table when you add a new line

  Hi guys,.
  
  I have a view object which I use to create a table of the ADF. I also have a button that uses a CreateInsert link to add a new row to the table. I have four fields: created_by, creation_date, last_update_by and last_update_date.
  
  I want these values to be set automatically when I click on add new rank.
  
  I want the following values:
  
  created_by - admin
  CREATION_DATE - sysdate
  last_update_by - admin
  lsat_update_date - sysdate
  
  Any suggestions on how to proceed would be appreciated
  
  Thank you
  -Mark

  brand,

  These four fields can be defined completely declaratively in the Entity object (check the service history Colum). Copied from (11 g) documentation:

  If you want to keep track of the historical in your entity object information, such as when an entity has been created or changed and by whom, or the number of times that the entity has been modified, you specify an attribute with the selection of historic column (in the Edit attribute dialog box).

  If an attribute data type is number, string or Date, and is not part of the primary key, you can then enable this property for your entity automatically update the attribute for the audit of historical value. How the framework handles the attribute depends on the kind of historical attribute, you specify:

  * Created the: this attribute is populated with the timestamp of when the line was created. The time stamp is obtained from the database.
  * Created by: the attribute is populated with the name of the user who created the line. The username is obtained using the method getUserPrincipalName() on the Session object.
  * Modified the: this attribute is populated with the time stamp whenever the row is updated / created.
  * Update by: this attribute is populated with the name of the user who creates or updates the row.
  * Version number: this attribute is filled with a long value that is incremented whenever a row is created or modified.

  John

• 0x0000007E error when you install the new hard drive

  Hello all,.

  I know there have been other questions about this message, but they are all people who can enter their disk in folders etc hard and changing pilots.  I can't.

  What happened: have a laptop ASUS, old for a few years.  got a top virus that killed my boot sector of the hard drive.  I can get into my hard drive and get off the old files, but cannot format or run a recovery on it.

  So... bought a new HDD to install it.  received an error message.  Was told to format it with a primary sector I did... always get the following error:

  A problem has been detected and windows has shut down to prevent damage to your computer

  (blah blah blah)

  STOP: 0X0000007E (0XC0000005, 0XF75DE0BF, 0XF7A2A208, 0XF7A29F08)

  PCI.sys - address F75DE0BF base at F75D7000, datestamp 3b7d855c

  Help!

  I tried the ASUS recovery discs... big error messages appears.  Tried to use the Windows XP disk... This error message.  Any ideas?

  Thanks in advance

  Carpet

  STOP: 0X0000007E (0XC0000005, 0XF75DE0BF, 0XF7A2A208, 0XF7A29F08)

  PCI.sys - address F75DE0BF base at F75D7000, datestamp 3b7d855c

  Help!

  I tried the ASUS recovery discs... big error messages appears.  Tried to use the Windows XP disk... This error message.  Any ideas?

  Thanks in advance

  Carpet

  Hi mast the pci.sys - address F75DE0BF base at F75D7000, datestamp 3b7d855c error is the result of your drive of windows either have no service pack or service pack 1. You must at least sp2 disk to enable PCI express ports. Follow instructions on the link below to integrate the sp3 in the disk, and then reinstall windows. Problem solved.

  Slipstreaming Windows XP to create a Bootable Windows XP CD or DVD

  I post some answers... No questions asked... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• RH7 Se blocks when you add a new topic

  I use RoboHelp 7 (which is not part of the TechComm Suite). I created a new project of WebHelp and created the template and. CSS file from scratch.
  
  Whenever I have add a new topic for the project, it hangs for a minute and then crashes. When the project is reopened, the new section was created successfully but must be imported so that it appears in the list of topics. The model uses a table to hold the information in the topic.
  
  I have looked around and could not find any similar support help topics. Copy us the files from RoboHelp since the network, they are stored on working on it on our office because it's much faster.
  
  Also, while I'm here, we also face accidents with our clips where it crashes soon enough the post-importation excerpts from code and the reopening, the excerpts are gone, and we have to re-import them (if they are still in the news, as a blank line). I saw a similar help on this issue topic, but have not yet found a solution for it.
  
  I'm sure there are a few essential information that I'm leaving out, but I can't think of it right now.
  
  Thanks for your help!

  I am sure that the problem is that the template file is somehow corrupted. I finished by recreating the model in a new HR on my local machine and copy on the CSS file and it seems to be fine now.

  We will ensure that we do all our changes to the HR projects on our local machines in the future.

• How do you keep a site at random to open automatically when you add a new tab?

  When I click to open a new tab (with plus sign), this Web site automatically opens: http://www.searchqu.com/web?src=derr & appid = 113 & systemid = 406 & q = http %3 A % 2F % 2F and says "search for: Oops! the website you were looking for no could be opened. "I tried the new URL extension with the home page selected and tried other tips related here. None of this does not work. I clean my system with the AVG software and malware. etc etc. also, sometimes I'll be on a website and it switch to this site randomly and keep me to access the right pair. Help!

  Hello, can you try setting the browser.newtab.url value to "on: newtab ' even once and then run firefox in safe mode, once (see Troubleshooting extensions, themes and problems of hardware acceleration to troubleshoot common Firefox) and see if the problem is occurring too... ther other users have reported that extensions like toolbars, Datamngr, ilivevid could be the cause of the issue - take a look in firefox > addons > extensions and uninstall them or any other entry suspect where it shows up.

  Please also delete any entry in the section of /programmes. control panel windows which refers to searchqu and may also use other security like the free version of malwarebytes software to do a full scan of your system.