in windows 7 networking shares there is a mistake, that the dependency service or group failed to start... help me to solvwe this problem

Similar Questions

• Cannot use scan command or windows update sites. He asserts that "the dependency service or group could not start.". I also have the error of 0x8007042c code.

  I can't download, install or uninstall since I had the free version of AVG Anti-virus, anti-spyware protection. I cannot turn off and can not download MSE. I'm panicking because my computer is not protected! Help, please! I'm not computer savvy, just everyday normal person that is extremely frustrated and at my wits end! Quick responses are most appreciated! Thank you

  Hello

  There have been bad reports are circulating about the latest AVG

  Download and use the tool to remove AVG from the link below to get rid of

  Choose your version of vista: 32-bit or 64-bit for the correct removal tool once it

  Click Start on your computer - computer right click - Properties - he will tell you he whether 32-bit or 64-bit vista

  http://www.Avg.com/us-en/download-tools

  then install MSE

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=e1605e70-9649-4A87-8532-33d813687a7f

  If you want to use another free AV Avast Anti-virus is very good too

  http://www.avast.com/free-antivirus-download#TAB4

  Make sure that you only have a SINGLE antivirus installed

  and if you need a good anti-malware program, which is highly recommended that you have these days, use the version of MalwarebytesAnti-Malware FREE

  http://www.Malwarebytes.org/MBAM.php

• "The dependency service or group could not start" - cannot open network connections to connect to the internet.

  Hello

  Ive recently managed to repair my Vista computer from a black desktop screen, by doing a Virus scan from kaspersky in safemode, thanks for the advice in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/a960276d-5147-4286-A437-711e96e25296/

  However, whenever I try to go to the network connections to connect to the internet, I get the error message saying "the dependency service or group could not start", so I can't update kaspersky for the last secuirity as well as not to use the internet. I tried the system restore, but there is no previous saved location for me to do. :(

  Any help would be greatly appeciated :)

  Thanks in advance

  Sam

  Medion M96350,

  Intel Core 2 Duo,

  T520 @1.5 - Ghz,

  Vista Home Premium

  Hello

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• Network is inactive: the dependency service or group could not start

  After you install windows vista sp1 on my new computer dell laptop, network lan connection is not active and when the mouse via the network sign in the notification area in the taskbar, the following error message appears:

  The dependency service or group was able to start.

  When you check the services, I found the following services should be started automatically but currently has started:

  DHCP client
  Network list service
  Network location awareness service
  NTRU TSS v1.2.1.27 tcs

  When you try to start one of them, get the error that the dependency service is not provided on except this one:

  Network location awareness, trying, start getting the following error: Windows cannt start local service...

  I checked the event log and found a number of errors like:

  -----------------
  Failed to initialize the Security Kerberos for authentication package on the server side. The data field contains the error number.

  -----------------

  The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

  --------------------------

  The volume shadow copy Service error: error unexpected mark of the IVssWriterCallback interface. HR = 0 x 80070005. This is often caused by incorrect security settings in the process of the writer or the applicant.

  Operation:

  Data collection of Writer

  Context:

  Writer class ID: {e8132975-6f93-4464-a53e-1050253ae220}

  Author name: System Writer

  Writer Instance ID: {855aa7e1-4b71-4448-bae8-84e347d26b85}

  -----------------------

  Network list Service service depends on the network location awareness service which failed to start because of the following error:

  The service has returned a service-specific error code.

  --------------------------

  NTRU TSS v1.2.1.27 TCS depends on the TPM Base Services service which failed to start because of the following error:

  The service has not been started.

  -----------------------------

  The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

  And this last error repeats several times...

  Please help solve this problem as soon as you can, its really serios error.

  Awahaba

  This article explains how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista. It describes how to use the System File Checker tool to analyze and replace system files in scenarios where you are troubleshooting a problem in Windows Vista: http://support.microsoft.com/kb/936212/

  You might analyze you the computer to check for malicious software that could of damaged service this type are suggested anti-malware analysis: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Windows 7 print spooler does not start: System error 1068 occurred. The dependency service or group could not start

  Hello

  I still have the "system error 1068. The dependency service or group was able to start.

  "I use Windows 7 Home premium 64-bit and my printer is HP PSC 1310 series.

  I downloaded the latest driver in the HP website, but it will not continue installation that the print spooler is not started.

  I tried "restart the spooler to print the title of the services, it does not, with the error message above.

  I have check the dependencies and it say HTTP and RPC

  I check on RPC and DCOM Server process Launcher two dependencies and the RPC end point Mapper is started

  I went to regedit and found the keys as follows I don't know if its correct:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler]

  'DisplayName"="@%systemroot%\\system32\\spoolsv.exe,-1 '.

  "Group"="SpoolerGroup."

  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.

  00,70,00, 6f 00 6f, 6 c, 73, 00, 00, 00, 76, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 00, 00

  'Description"="@%systemroot%\\system32\\spoolsv.exe,-2 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" =: 00000002

  'Type' = dword:00000110

  "DependOnService" is hex (7): 52, 00, 50, 00, 43, 00, 53, 00, 53, 00, 00, 00, 68, 00, 74, 00, 74, 00,------.

  70,00,00,00,00,00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,------.

  72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 68,.

  00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 74, 00, 69, 00, 66, 00, 79, 00, 50, 00, 72, 00,------.

  69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 41, 00, 73, 00, 73,------.

  00,69,00,67,00, 6F, 00, 50, 00, 72, 00, 69, 00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00,------.

  6 b, 65, 00, 00, 6F, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00, 4 c, 00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00

  "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Performance]

  "Close" ="PerfClose."

  "Collect"="PerfCollect."

  "Collect Timeout" = dword:000007 d 0

  "Library"="winspool.drv".

  "Object list"="1450".

  "Open" = "PerfOpen."

  "Open Timeout" = dword:00000fa0

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Security]

  "Security" = hex: 01, 00, 14, 80, 78, 00, 00, 00, 84, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.

  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.

  00,00,02,00,48,00,03,00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.

  05, 0, 00, 00, 00, 00, 00, 18, 00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.

  20,02,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01,

  01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  I go to C:\Windows\System32\spool\PRINTERS, there is nothing for me to remove it.

  Any other advice would be greatly appreciated...

  Hello yan_dao69,

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This will automatically diagnose and fix printing problems:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Ideally, this would set the print spooler service issues.

  Method 2:

  I suggest that you disable the Antivirus software temporarily and verify if you are able to start the print spooler service. You can check the link that will give you information disable antivirus below:

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Method 3:

  Check the dependency of the spooler services in the registry.

  a. Click Start, type regedit in the search box and press ENTER.

  b. look for, and then click the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler

  c. right-click on spooler, click Export, save a backup file on your desktop.

  NOTE: If an unforeseen problem be encountered after changing the registry, please double-click on the file to restore the backup.

  d. in the details pane, if the DependOnService value shows values of RPCSS and other key, right-click DependOnService and then click on edit.

  e. in the value data box, delete the other keys and then click OK.

  f. exit the registry editor.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - THE DEPENDENCY SERVICE or GROUP has PU START

  Original title: I am Hiwa

  I got a problem with my internet connection when I opened the Network Center and sharing it tells me that you have a problem.

  no computer and internet was appear here! It is UNKNOWN
  THE SERVICE DEPENDENCY OR A GROUP COULD START.
  Please help me.
  Sorry for my bad English.

  Hello

  You did changes to the computer before the show?

  Method 1: Network troubleshooting

  See the following site:

  Using the troubleshooter from network in Windows 7

  http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7.

  Method 2: Disable antivirus software and firewall

  Step 1: Turn off the antivirus

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software.

  Step 2: Disable firewall

  See the following site:

  Enable or disable Windows Firewall

  http://windows.microsoft.com/en-US/windows7/Turn-Windows-Firewall-on-or-off.

  Important note: Firewall and antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable them. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, so that your antivirus software or firewall is disabled, your computer is vulnerable to attacks.

  Method 3: Networking in safe mode

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  See the following site:

  Start your computer in safe mode

  http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode.

• dependency service or group failed to start on windows 7

  I can't open regedit to try to resolve the problem with the service dependency

  Please provide a copy of your system information file. Type system information in the search box above the Start button and press ENTER. Select file, Export and give the file a name noting where it is located. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download your disk from sky to share with everyone and post a link here. Please say if the report was obtained in safe mode.

  Please download and share with all copies of your system logs and Application of your event viewer on your sky drive and post a link here.

  To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, select the Action in the Menu and record all events (the file default evtx type) and give a name to the file. Do the same for the application log. Don't provide filtered files.

  Help with Sky Drive see section 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Unable to start Windows Media pPlayer 11 to share media: Error 1068 dependency service or group could not start

  1068

  Cannot start media player 11 to share media. Error 1068: the dependency service or group could not start

  Hello! I found the solution to my problem here:

  http://wiki.answers.com/Q/Why_do_I_get_an_Error_1068_when_I_try_to_share_my_media_in_WMP11_in_WXP_pro_sp2_start_service_in_services

  It is possible that it would be more useful for someone.

• Windows Vista firewall problems. Error 1068: The dependency service or group

  When I try to Active my windows firewall I get
  the following message appears:

  "Windows Firewall settings cannot be displayed because the associated.
  service is not running. You want to start the windows firewall service? »

  The yes/no option.

  If I clicked 'Yes', another message appears saying:

  "Windows cannot run the Windows Firewall service.

  Okay, so I'm trying to start this service. I looked at the service
  status and stopped her, so I guess it must be started, if I click on
  beginning. However, the message:

  «Cannot start service on local computer windows firewall.» Error 1068: The dependency service or group
  Could not start.

  What else can I do to access the windows firewall?

  Hi elcri

  My apologies to zero you answer you earlier since May 3.

  I have to assume that the problem is still there?

  Allows to check and see if the ICS Service is running or not (we want to disable it if it is enabled/running)

  Click Start
  In the box, type start search in services of
  List programs, right-click on service , and then click run as administrator
  Scroll down the list of Services until you come to (ICS) ICS

  Is it enabled or disabled?  If on, double-click top and change startup to off and stop the service.
  Reset

  I would like to know if this solves the problem or not - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firewall Windows gives me "error 1068: the dependency service or group could start" I am on Vista 64 bit.

  I use Vista 64 bit and my windows firewall does not illuminate. I tried to make a running manual but I get

  Error 1068: the dependency service or group could not start
  Things I've done:
  • ("Sfc/scannow") System File Checker - he says he found a problem in the Windows Firewall, but couldn't fix it.
  • MicrosoftFixit.WindowsFirewall.Run.exe Microsoft.com... problem persists
  I've done two things on the command line for (you) help to solve this problem:
  Queryex mpssvc C:\Users\Dan>SC

  Service_Name: mpssvc

  TYPE: 20 WIN32_SHARE_PROCESS

  STATE: 1 STOPPED

  WIN32_EXIT_CODE: 1068 (0X42C)

  SERVICE_EXIT_CODE: 0 (0X0)

  CHECKPOINT: 0X0

  WAIT_HINT: 0X0

  PID                : 0

  FLAGS:

  C:\Users\Dan>sc qc mpssvc

  [SC] QueryServiceConfig SUCCESS

  Service_Name: mpssvc

  TYPE: 20 WIN32_SHARE_PROCESS

  STARTUP TYPE: 2 AUTO_START

  ERROR_CONTROL: 1 NORMAL

  BINARY_PATH_NAME: C:\Windows\system32\svchost.exe k LocalServiceNoNe

  network

  LOAD_ORDER_GROUP: NetworkProvider

  TAG                : 0

  Display_name: Windows Firewall

  DEPENDENCIES: mpsdrv

  : bfe

  SERVICE_START_NAME: NT Authority\LocalService
  Help me, please?

  Hello

  I suggest that you follow the steps in troubleshooting provided in the link below to fix the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cannot-start-Windows-Firewall-Vista/d1d764c7-8978-48da-B1F1-bb3e394a9a2a

• Unable to connect to networks wireless on laptop Windows 7 Enterprise. Cannot start the autoconfiguration WLAN service. "Error 1068: the dependency service or group could start."

  original title: cannot start service autoconfiguration WLAN and EAP services

  I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."

  I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.

  I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.

  When I tried to start the WLAN auto configuration service, I get the following error...
       Windows could not start the service WLAN autoconfiguration on Local computer.
       Error 1068: The dependency service or group could start.

  When I tried to start the service of Extensible Authentication Protocol, I get this error...
       Windows could not start the service on Local computer Extensible Authentication Protocol.
       Error 1053: The service did not demand launch or timely control.

  I found that all dependent services for the EAP are running. And all dependent services for autoconfiguration WLAN service are running except the EAP service.

  I searched the internet for the solution madly before posting here. Any help is greatly appreciated!

  Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921

  This link has the solution that worked for me.

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• When you try to share my internet connection via AD HOC I get this error: "an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »

  original title: cannot share internet

  I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying

  "an error occurred while internet connection sharing was being enabled.   the dependency service or group was able to start. »

  Hello

  You can view the article in the Microsoft Knowledge base and check if it helps.

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Let us know if you need more assistance.

• No firewall or Internet, Windows Firewall errors: "0x8007042c" and "error 1068: the dependency service or group could start.

  Problem started when the McAfee Firewall shuts off and I could not turn it back on.  Also I can't activate Windows error 0x8007042c firewall.  Also no Internet access due to firewall restrictions.  Tried to manually turn the Windows Firewall service (as an administrator), but now get error 1068: the dependency service or group could start.  Strangely, the McAfee Firewall seems to be OK again?

  McAfee and click OK in the same sentence? Hmmm... Take a look at this site for some good information and instructions for the removal of malicious software.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.