In Windows Mail, I need to change the incoming Pop IMAP server info

Similar Questions

• Need to change the database to another server

  Hello
  
  We purchased a new server and want to move our database to the new. I intend to do following things:
  
  (1) stop the database and backup to take.
  
  (2) create a new database on the new server with the same structure of directory and same name.
  
  (3) copy all the files to the new server (file initorcl.ora, password, data files, control files).
  
  (4) give old IP of the server to the new server.
  
  (5) make the necessary changes to Tnsnames.ora, listener.ora.
  
  (6) start the database.
  
  
  Please advice if I am out of the important steps.
  
  Thank you

  Step 2 is not necessary and can be confusing because it creates data files that you don't want! (you want the data files to from the "old" Server).
  However, if the platform is Windows, you will need to create the Windows Service to start the database instance.

  Hemant K Collette

• Windows Live Mail necessary today to change the password ID, error ID: 0 x 80048831

  Windows Live Mail necessary today to change the password ID.  I can receive mail to gmail.com but not my old address msn, I've had for years.

  How can I reset the msn mail password, I get error Windows Live Mail error ID: 0 x 80048831

  original title: problems with my msn email

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• I need to change the DHCP Pool to the LIST of 'DECLINE' for WINDOWS 2003R2

  Applies to: Windows | Windows 7 | Security, privacy, and user accounts
  I need to change the DHCP Pool to the LIST of 'DECLINE' for WINDOWS 2003R2 - I am unable to view the file named MACLIST.txt in C:\windows\system32, even if the file system is open and I am the administrator with full user rights. I see this file name in the REGEDIT, but cannot display to open it and place it in the MAC addresses I want to REFUSE in the server pool. The operating system is Windows Server 2003R2 Standard - SP 2

  Please help

  PRyan

  Hi SummaCorp,

  Thanks for posting your question in the Microsoft answers Forum.  If you have questions about Windows Server 2003, please visit the Windows Server Community.

• I need to change the folder where download windows updates, I know there must be a way to do this.

  Could someone help me on this issue.

  I need to change the folder where download windows updates, I know there must be a way to do this.

  Updates Windows installation location cannot be changed. Windows updates tend to fix and replace the old files of the system, so it would normally replace a file in the System32 folder.

  If you want to free up disk space, see the following:

  • How to back up and restore your files manually
  • How to free up disk space in Windows

• How do you determine the steps to use when they need to change the info in the diaglog box "WINDOWS SECURITY" of win 7, which asks the user and the password?

  My background: I can only see this dialog box titled WINDOWS SECURITY when I want to access my log to router with my office router connection. The dialog box refers specifically to my router, and asking a user and a password.

  A long time ago that I asked to remember and, of course, I forgot it and the location that I wrote. Now I am unable to determine what I thought, would be a simple reset and the steps that allow me to perform a reset. After a series of search phrases on Bing, and in the community of the SP as well as Win 7 Pocket administrator index I can't find the steps because the dialog box, it seems with the title of the WINDOWS SECURITY is too general.

  I need to install a new router and need to change the user and password. I don't know if user and password are unique to the company of router or Microsoft Win 7. Nevertheless, I can reset thinking them they are unique to me and Microsoft because there is no query such as, "you forgot your password?', whereby get you a temporary.  These steps are already stationed in the community and I just can't get into the research phase right? (What is related to IE 11?) Thank you.

  > I need to install a new router and need to change the user and password.

  Do you want to connect to your old router?  If Yes, most routers have built-in switch you tripping with a paper clip or similar to force a reset to the factory settings.  You can then access the default connection.

  If it's the new router, it should be accessible with the factory default login. If you don't know please post that make the exact and the model of the router.

• Windows Anytime Upgrade, you may need to change the locale

  I'm trying to upgrade Windows 7 Home Premium to Windows 7 Professional.

  I type "Windows Anytime Upgrade" in the search field and go to the Express upgrade window.  I click "go online to choose the best product...". "and then it shows a window saying that I"might need to change the locale.  The computer is in the United States, whose English is the default location.  It will not progress beyond this screen.

  Windows Anytime Upgrade is no longer functional as it is a product of the retail, Microsoft sells more retail licenses.

  Your best option is to an Express Upgrade card for any inventory or Professional upgrade Windows 7 use the retail purchase with Anytime Upgrade from Windows 7 Home Premium product key.

  Where can I still get Windows 7?

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Microsoft Windows 7 Anytime Upgrade (Home Premium to Professional) [Code online]

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• Just place an order for Photoshop and Premiere Elements. I ordered in error windows version. I need to change the Mac version. How?

  Just place an order for Photoshop and Premiere Elements. I ordered in error windows version. I need to change the Mac version. Already obtained serial numbers, but I have not downloaded anything. I called the customer service that they me transferred to HIM and HE asked me to go to the cat. Chat is always busy. How can I change the version before you download?

  Javifran1234,

  To cancel or change orders online, please visit this link:

  Cancel or change orders online

  Guinot

• Have a virus/malware and cannot open windows mail and how export/copy the measages

  I should have gotten a virus/malware/trojan, which affects the connection and does not allow me to open the control panel, or windows mail.

  I need to know how to copy/backup/export the e-mail messages that are still there. Of course, I can't use the export function since I can't open windows mail.

  Hello

  • You receive an error message when opening Control Panel or Windows mail?
  • What were the changes made before the issue occur?

  You can view these methods:

   
  Method 1:
   
  I suggest you make a system full scan just to be sure and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  Method 2:
  NOTE:
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
  You might try the following and see if it helps to get Windows Mail open.
  You can delete all entries in the registry for Windows Mail. The junk e-mail filter information have been corrupted.
   
  a. Click Start, in the search box, type regedit. Then choose continue to leave and then read the help file.
   
  b. then highlight this registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows Mail
  right-click and choose export to back it up. You can save it to your desktop. It will save the key as a measure of protection.
   
  c. make sure that Windows Mail is closed and right click on the key again, and then choose Remove.
  d. then try to start Windows Mail and see if it is now open.

• Mailing address: change the incoming mail server

  My servers have changed and I need to add new servers to my Mail application, but I can't change the incoming mail server: the text in the incoming mail server field is light gray and I can't choose or change. I changed the outgoing mail server and I can now send emails, but reception does not work. The incoming mail server is online and it is the same as the outgoing e-mail server.

  Can someone help me and tell how to change the incoming mail server?

  Ok. I found help in this thread: cannot not change the incoming mail server

• I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use.

  Quick question: I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use, when it is not.

  The question for a long time: I've updated two disks in my computer from 1 TB to 2 TB. They were e and K:. The KC: drive is used as a backup of data on E: drive.

  I copied all the data on the old drive E: to the new, but when I put the new drive in place of the old, XP wouldn't let me assign the E: drive letter. It is ironic that several times, I see the warning that if you change a drive letter, some programs may not work - so of course that Microsoft is aware of this problem - however, it is annoying when you NEED to change a drive letter to OPERATE programs, but Windows won't let you. Sometimes, trying to protect users from doing stupid things prevents them from making things work...

  Anyway, after some research, I discovered that if I put the drive E: OLD and "remove" the drive of her letter, then the letter E: becomes available again. It did not work, and my computer is now partially satisfied with his new E: drive. However, the same trick with the new drive K: does NOT work.

  I removed the letter 'k': the old K: drive, but when I install a new one, it won't let me change it. It happens to be stuck at 'l': it's no use to me because backup programs are ready to use the K:\ path.

  There is that no "K:" drive in my computer and I deleted the letter k: the old disk. How do I FORCE XP to designate the new drive K: so that my backup program can work again?

  Thank you.

  Did you try to start your computer in Mode without fail (repeatedly, key to tap the F8 as your computer starts) and then try to re-assignment of drive letters?
  I think that some programs on your machine may be playing with your drive letters.  Boot safe mode will allow Windows to operate with a minimum of processes that are running and you should be able to change drive letters in these conditions.

  HTH,
  JW

• I need to change the motherboard in my laptop. How to reactivate XP and Office?

  I need to change the motherboard on a Dell laptop because of the infamous video problem Nvidia. The laptop has XP Professional, Office 2003, and all my other programs on it. After I have change the motherboard, I guess I'll have to reactivate XP and Office. How do I do that? Thank you.

  Hi J_C_H,

  
   

  Method 1: follow the steps described in the article below to activate Windows XP

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890

  
   

  Method 2: Follow the steps described in the article below to activate Office

  Activate Office
  http://Office.Microsoft.com/en-us/Visio-Help/activate-or-register-programs-in-the-Microsoft-Office-system-HA001118776.aspx

  Method 3: You can contact a Microsoft Product Activation Center

  How to find a phone number for a Microsoft Product Activation Center
  http://support.Microsoft.com/kb/950929/en-us

• Need to change the scale to the default scale my resolution, but the ok button is not visible

  Original title: DPI scaling

  Need to change the scale to the default scale my resolution, but the ok button is not visible

  This help,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/want-to-return-DPI-scaling-to-original-96-DPI-but/bd160079-c1e1-47F8-9727-2bc22892dfe0

• Need to change the properties of the Clipboard or increase the number of characters that can move from one program to another

  Original title: Clipboard

  Hello

  I use a software and I have the problem with the paper, I need to change the properties of the Clipboard or to increase the number of characters that can pass from one program to another

  where can find Clipboard in windows 7 and how can I change properties?

  There is no user-oriented Clipboard option.

  For 32-bit applications, the Clipboard can allocate blocks up to 2 GB in size or to a maximum of the amount of virtual memory in the PC has, is the least. The Windows Clipboard does not impose any other size limits.

• I need to change the address of that my developer PlayBook is shipped... Someone has an idea how to do this?

  I wasn't expecting the PlayBooks free to hold out long enough to ship.  Now that it appears that I will not mine get until the first week of may, I need to change the address that mine will be available so that I can travel.  I'm afraid that when the mine is sent, my mailing address has changed.

  Those of you who have had correspondence with the ideas of TGM, who would be the best person to contact to get my mailing address has changed?

  Thanks for your time!

  Just reply to the E-Boutique online order-mail you received and tell them to change the delivery address.
  It is done a few days previously and received confirmation about two days later.