In Windows Movie Maker - titles and quotes move after placing the transitions

Similar Questions

• I have the video on a SD card and a Mac after placing the card in the Mac SD how do you get the video on the Mac it's done in iMovie or QuickTime?

  How do I get the video from an SD card and Mac

  What you want to do with the video? Just play, or modify it?  If play, drag it into iTunes. It will, of course, need to be in a format that iTunes supports.  Who will copy it to the computer and place it in the home movies iTunes folder.  If you want to change it drag the map file to a desired location on the computer.

• Error: "Windows cannot open help and Support." "To solve the problem, see Help and support.

  Original title: help & support

  When you try to use help and Support on the start menu, a small window opens saying "Windows cannot open help and Support." To troubleshoot the problem, see Help and support. "It's double Dutch to me. Can someone help, please?

  Hi EdwardBahr,
   
  -Remember to make changes to the computer between the calendar when things worked fine and now?
   
  Try the steps listed in the following article and check, if it helps in fixing the issue:
   
  You cannot open the help and Support Center in Windows XP
  Cannot load help and Support Windows

• My 8 window is not updated and updates are appearing during the verification of updates.

  Original title: updates

  my 8 window is not updated and updates are appearing during the verification of updates

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• I need to activate my windows 7 Home premium and when I look at the bottom of my computer product key essentially disappeared... What can I do to get my product key?

  I need to activate my windows 7 Home premium and when I look at the bottom of my computer product key essentially disappeared... What can I do to get my product key?

  Option 1: You will need to invest in a new license.

  Option 2: If your computer comes with a recovery partition, use to reinstall Windows 7, it will exempt the need to have a product key.

  Option 3. Ask a recovery disk set from the manufacturer of your computer and use it to reinstall Windows 7, it will be exempt from the need to have a product key too.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  ------------------------------------

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

• I'm trying to convert a word doc into a pdf file (which I've done 100 times) but now when I connect and press 'convert' after selecting the file it gives me a error message that says "player doesn't have the ability to access this service?

  I'm trying to convert a word doc into a pdf file (which I've done 100 times) but now when I connect and press 'convert' after selecting the file it gives me a error message that says "player doesn't have the ability to access this service?

  Install and use Acrobat Reader DC. You can not use previous versions more.

• Windows DVD Maker Burns not part any video of the film, I have a black screen in the middle of the music and titles...

  I made a movie in Windows Movie Maker using film 8 mm which was transferred to the files. The film came out great but when I go to 'release', or burn to dvd, it says Windows Movie Maker will save file and open it in creation of DVD to burn/publish.  About halfway through the movie, there is no 8 mm video, you can see all the titles, and hear the music that I edited in but no video.  I cut the video in half thinking there was too much data, I burned my movie with no other programs running, I changed all the transitions and titles in thinking that you might have a glitch.  I have burned about 10 films try something different each time without success. Help!

  Hi girl Jeffs.

  I suggest you try the following steps:

  Step 1: This question could be associated with video filters in windows movie maker:

   

  Create a movie with reporters off and then try to publish

  To turn off the filters, follow these steps:

  In windows movie maker

  1. click on Toolsand then click Options.

  2. click on the compatibility tab.

  3. to turn off a filter, clear the check box next to the name of the video filter.

  See the link below for more information on the audio filters video\

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Step 2: Try to reduce the speed of DVD burning in windows DVD creation and check, see the link below for the steps

   

  Change Windows DVD Maker DVD-video settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

   

  For more information, see the link below

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Movie Maker plays sound but no picture for the Sims 2 movies after installing the codec vp6vfw.dll - how to fix Movie Maker?

  Sims 2 was not properly installing its codec vp6vfw.dll film so I copy and pasted from Sims 1 CD in my windows > System 32.  Now when I play the Sims 2 game I can make movies.  They appear in Windows Media Player very well.  But they do not visually show in Windows Movie Maker.  I get sound.  How can I fix Windows Movie Maker to display my Sims 2 movies?

  I found the answer.  Windows Movie Maker is no longer supported.  The new version is Windows Live Movie Maker, and it has all the appropriate codecs.  Download that and you're good!

  WMM is trash but it can not be uninstalled from the PC.  Just ignore it and use WLMM.

• I tried to burn some pictures with music on a DVD using Windows DVD maker, but others cannot open or run the disc. I tried to use DVD-R and DVD + R, but nothing works. Any suggestions?

  I have created a slideshow with background music using Windows DVD maker on a DVD-R and DVD + R and others cannot open or run the disc. I can't run into a DVD player, but my computer it plays very well. Any suggestions?

  Lol it won't play in my DVD player either. Just the computer.

  =====================================
  This could be a hardware problem with your DVD writer
  but here's something you can try.

  Create your slideshow (photos and music) in the film
  Creator of... and then publish the file to a folder on your hard drive
  walk in the .wmv format.

  Windows Vista
  Getting started
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Then try to use the following free software to burn your DVD:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://tinyurl.com/yzx9sck
  or...
  http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  Good luck.

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  John Inzer - MS - MVP - digital media experience

• Windows DVD Maker on Vista freezes at 40% on the project, only small projects will burn successfully.

  I am running Windows DVD Maker on a Vista PC.  When I start the burn sequence the coding process will continue at 40% and then the application freezes.  My initial project was 125 minutes of capacity DVD 150 minutes.  I tried to burn a small project in 58 minutes and successfully completed.  No idea why I can't use more than the ability of the DVD?  All I can do to fix this?  I'm running a new HP with a Phenom x 4 processor, 64-bit, and I've got important of RAM and hard drive space available.

  I am running Windows DVD Maker on a Vista PC.  When I start the burn sequence the coding process will continue at 40% and then the application freezes.  My initial project was 125 minutes of capacity DVD 150 minutes.  I tried to burn a small project in 58 minutes and successfully completed.  No idea why I can't use more than the ability of the DVD?  All I can do to fix this?  I'm running a new HP with a Phenom x 4 processor, 64-bit, and I've got important of RAM and hard drive space available.

  ===========================================
  Usually a single layer 4.7 GB DVD white held an hour of high
  quality video. With compression, some programs are capable of
  the extension of this period. I don't know exactly what is DVD Maker
  capable of in that regard I think 150 minutes it is really pushing.

  Large and complex projects usually cause problems. Best bet IMHO
  would be to create several small projects and publish (save) each
  a WMV format movie to a folder on your hard drive.

  Then import the WMV files collected in DVD Maker and each of them
  becomes a scene (chapter), you can have up to 18 scenes.

  Without a doubt... video editing and DVD burning can be a frustrating business.

  Good luck with your project.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• On windows, the command prompt window (XP) start appears and closes what can be the problem

  On windows, the command prompt window (XP) start appears and closes with 2 to 3 seconds what can be the problem

  Hello
  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you put the computer in mode normal startup such as suggested in the article.

  Check if that helps.

• I forgot my Windows Live ID password, and I do not receive the email to reset my password either.

  forgotten my windows live id password and the reset option is not coming on my email account. I can't verify the e-mail address because I can not connect. What to do next?

  original title: forgotten my password.

  What's next is to ask in the right place: http://windowslivehelp.com/

• Windows 7. Fax and scan does not display the menu programs

  original title: Windows 7.   Fax and scan

  Windows Fax and Scan no longer appears in the menu programs

  Hello!

  Go to start and right-click on all programs, and then click Open. Now open the program folder shown that there are. Right click New-> shortcut-> give the path like %windir%\system32\WFS.exe-> then click and Type Windows Fax & Scan under name click Next or finish and you're done.

  Concerning

  Microsoft-Most-Valuable-Professional, blog at: http://www.thecomputernext.com

• Refresh of Windows 8 is misleading and possibly in violation of the right of consumers

  The function 'refresh' of Windows 8 is misleading.

  Microsoft should reformulate the text of the button to make it clear that all the installed user applications will be lost.

  This breach of care can be reasonably expected causes major disruptions and consistent in days of lost productivity and more fresh download reacquire then put back in place and then reconfigure all software purchases, product keys, passwords, account etc. configurations.

  It took almost 90 minutes to as much (I transferred from one rep to another and have restock all my personal information) to try to get a copy of my product key for my downloaded Office 13 (original sent by email, but outlook has been removed), but they still can't find even the order - largest jeez worldwide software company and they may not share cust details during the call transfer or find a command it 6 months ago () good they can find an order 6 years ago!

  This MacBook pro is looking like a better buy with each second passing lost.

  Do that 2 hours - they gave up and put me back on hold with tech support where I was an hour ago...

  Well no, because the call dropped after 5 min of music then a burst of ring

  Hello

  I don't know how it could be more clear about what happens when you refresh the PC?

  Here is a screenshot of the first screen you see when you click the Refresh button.

  

  Concerning

• I can not select Windows 8.1 upgrade and other applications after update system

  I just refreshed my laptop Windows 8.1 after that that he returned to Windows 8... I opened the store and I can't select Windows 8.1 upgrade and other applications. What can solve this problem?

  Hey Kevin,

  If you bought your laptop with Windows 8, and she had a recovery partition, it would reset to Windows 8 when you want to run a system to refresh. This also applies if you have performed the update system using a disk installation or recovery of Windows 8. You mentioned that you are now unable to update Select 8.1 of Windows update, the Windows store.

  The Windows 8.1 update is not listed? Or you can not face problems with the update 8.1 for Windows from the Windows store?

  If you are facing the issue later, what happens when you click on the update of Windows 8.1 in Windows store? An error message appears?

  You also mentioned that you can not store of Windows other apps? What happens when you try to install?

  If you are unable to find the Windows 8.1 update in the Windows store, try the steps suggested in this article and checking:

  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

  If you are unable to install the update Windows 8.1 displayed in store Windows, then try these steps and check:

  First of all, make sure that you have installed all the Windows updates available, including 2871389 KB and KB 2917499.

  Method 1:

  Run the Windows update troubleshooting utility which can automatically detect and fix most of the incorrect settings that could cause problems with the download of updates. See the following steps:

  1. Press the Windows key + F to bring up the Search bar charms.
  2. Type of Troubleshooting and press enter; Click the tab settings , under the search box.
  3. Click on the tile to find and fix the problems and then click on the button show all the left pane.
  4. Click the Windows update troubleshooting tool and run it.

  Method 2:

  If the problem persists, disable any third-party antivirus software that you may have installed temporarily and check.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  If the problem persists, start your computer in a clean boot state, and then try to install Windows 8.1. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.