In Windows XP stops to be a message window saying "unprotected".

Similar Questions

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Internet Explore has stopped working, and a message saying that a problem led the program to stop working correctly. Windows willclose the program and notify you if a solution is available is appear

  Internet Explore has stopped working, and a message saying that a problem led the program to stop working correctly. Windows willclose the program and notify you if a solution is available is appear

  On the desktop, you can open the Action Center under the taskbar > maintenance > view reliability history > view all reported issues

  You can right click on some of the mistakes "Stopped working" "Internet Explorer" > view technical details

  What are the details of the errors?

  There is a 'Copy to Clipboard' link at the bottom.

  Paste the information first in Notepad and then copy the Notepad information to post here.

• On startup, I get this message that says «Office Agent has stopped working - Windows 7»

  At startup I get this message that says "Desktop Agent stopped working" apparently this has something to do with the link of the century. What this mean and how can I solve this problem?

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  Hi Donna Lewis.

  'Set Office agent' If you look closely at the error, it will say something about the port officer at Qwest. This agent is like the update of the installer of Qwest.

  Try this...

  (a) click the Start button, in the start search box, type msconfig and press the Enter key

  (b) click on the Startup tab and scroll down until you find Desktop Agent sandbox.

  (c) clear the disable check box and click on OK.

   

  Just delete the Qwest Installer through Control Panel and you should be good to go.

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Windows media player, when I try to download a cd, it burns completely to 99% and then stops with an error message indicating that it may miss a codec.

  When I try to download a cd, it burns all the way to 99% and then stops with an error message indicating that it may miss a codec. How could I be missing this and how I get it back or find exactly what it is that I'm missing? Help!

  Hi jeanamae,

  the error message shows which codec is missing?

  Is there a 'additional information' icon or the link?

  Try to reduce the speed of the burn and see if you get the same question.

  B Eddie

• I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. »

  Original title: webcam inspiron 1420

  I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. "I checked and it is said that it works correctly.  I also looked and found something that seems to say that the app crashed.  Any ideas?   Thank you

  BFM

  Hi BartMorgan,

  ·         What is the error correct mrssage?

  ·         Is - this "LiveCam.exe has stopped working" or "LifeCam.exe has stopped working"?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  You can also check if the troubleshooting steps to help you in the article mentioned:

   

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266612

  Method 2: Alternatively, you can try to uninstall and reinstall the drivers of webcam and check if that helps.

  Step 1: You can try to remove the webcam in Device Manager:

  a. click the Start button, in the start search box, type devmgmt.msc and press enter.

  b. in the Device Manager window, click view , and click Show hidden devices

  c. right-click on the webcam is installed.

  d. in the dropdown menu, click Uninstall or Remove.

  e. in the dialog box to confirm the device removal, click the OK button.

  Step 2: Also verify and uninstall the webcam again from programs and features program, if it is installed and then restart the computer.

  a. click Start.

  (b) in the search box to start, type appwiz.cpl and press enter.

  c. in the programs and features list, select the webcam program and Uninstall it.

  d. restart the computer.

  NOTE: After the reboot, the computer should recognize the connection of the camera and start to reinstall the driver.

  I hope this helps.

• I currently have an ad - one that I use frequently on IE8 which does not work on IE9. How can I stop to get a message that I have new updates when IE9 is the only update?

  I currently have an ad - one that I use frequently on IE8 which does not work on IE9.  How can I stop to get a message that I have new updates when IE9 is the only update?

  Hi altak38,
   
  -What is the add-on which you speak?
  -Are you referring to Windows Update with Internet Explorer 9 update several times even if it has been installed?
   
  If so, follow the steps in the following article to resolve this problem.
   
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
   
  Post back with more information for the issuance of the add-on - to help you help.

• I get a message that says that Adobe Flash Player has stopped a potentially dangerous operation.

  I use Articulate to create my player.html file. When I double click on my player.html file I get a message that says that Adobe Flash Player has stopped a potentially dangerous operation.  Then he shows me the name of a swf file in my files that attempts to communicate with the player.html.  Then is say s to allow this application to communicate with the internet, click settings, but it doesn't seem to help.  I tried to click on all the tabs located under settings window that opens, but the problem persists

  

  Ok.  I got it today.  I apologize and thank you for your patience.  I was completely missing it.  My bad.

• My email has stopped taking in the messages from the server

  All of a sudden my Mozilla account has stopped taking in the messages from the server (yahoo). I go to the website of Yahoo mail and I see many new messages but none of them come thru. There is one exception. I get an email again and again that makes it. I've checked everything and even deleted my account and more. Nothing has changed.

  Good. You can then mark the thread as "Solved" Please?
  Thank you.

• my selection talking has stopped working with text messaging

  my selection talking has stopped working with text messaging

  Hi, plumberboy58.

  Please visit Apple support communities.

  I understand that you have a problem with the selection of talk.  Let's start by making sure that talk of selection is always enabled in settings > general > accessibility > speech.

  Talk about selection

  If talk about selection doesn't always show when you select a text message, forces all applications to close and restart your iPhone.

  Force an app to close the iOS

  See you soon

• How to stop the pop up message: do you want to add the _ directory to your search path?

  After you install LabVIEW 8.6.1f1 on a new PC, every time I choose one of my screws via her select a VI... palette, I get a pop up message saying: ' you want to add the "P:\CWalker\COREYs LabVIEW subs projects\Phoenix" directory to your search path?

  I've already added 'LabVIEW P:\CWalker\COREYs subs projects\Phoenix' in the option search for VI and restarted path LabVIEW, but the message does not appear.

  Yes, this is how I added the directory.

  Since then, I managed to stop the pop-up message.

  Of course, I had deleted some of the default values, such as "-*" of the VI option search path and that caused the popup message.

  Thank you!

  Corey

• I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  Hi facions.

  What browser do you use?

  If you use Internet Explorer, you can optimize Internet Explorer and check if the problem persists. For more information, follow this link: How to optimize Internet Explorer

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted

  I've recently updated to WINDOWS XP Pro SP3.  Thursday morning, when I tried to boot my pc, I got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted.  I've ever seen at the windows startup screen.  What can I do?

  * original title - I got an error message that says C:/WINDOWS/SYSTEM32/CONFIG/SYSTEM has been corrupted. What can I do? *

  System 32 system config is missing or currupt

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  See also

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/kb/822705

  How to fix a missing or corrupt Windows\System32\Config\System file
  http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I can't install my install my java because I get this message that says that my windows install is not properly installed.please help

  I can't install my install my java because I get this message that says that my windows install is not properly installed.please help.

  Hello

  ·        You did changes to the computer before the show?

  ·        It happens only with the installation of java or with each facility?

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Note: extend the question to the Windows Installer and try the steps.

• Pop-up message that says cannot complete the Validation. Clicking on help just recycles. Installation Wizard indicates that Windows has been validated, but I still get messages at intervals.

  After a recent relocation, I get a pop-up message that says "unable to perform Validation. After having discussed with a representative of Microsoft, I went to the Setup Wizard that says Windows is already posted, but I always get the message.

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. don't you make changes on the computer before the show?
  2. What is the full error message?

  3. What antivirus do you use?

  Method 1:
  You can see the steps in the link and check.
  Windows Genuine Advantage does not validate a copy of Windows XP

  http://support.Microsoft.com/kb/916247
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756

  Reference link:
  Description of the Windows Genuine Advantage Notifications application
  http://support.Microsoft.com/kb/905474

  Method 2:
  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  If you need further assistance, please answer and we will be happy to help you.