In XP's message "disc full Recover (d :)).

Recovery (* D :) drive is full; 5,10 MB free of 976 GB.) What should I do? Can I safely remove one of these:

RS-WORK stations empty, sources of 1.23 MB, Windows 3.28 MB, file BIN 528 bytes. ?

Usually, recovery D: 'disc' is actually just a small partition read-only on a hard drive more.  It contains the files necessary to reinstall Windows, if it became necessary, and it's generally 'full' as it is not expected that all data will be written to that partition.  The rest of the space on your hard disk should appear as your drive system "C:".  You can use the disk management tool to review the configuration of your drive:

"How to use disk management to configure basic disks in Windows XP"
  <>http://support.Microsoft.com/kb/309000>

Do not delete anything on your disk partition of recovery unless you have independently to reinstall windows which becomes necessary in the future.

HTH,
JW

Tags: Windows

Similar Questions

  • Message "memory full" Sony ICDPX312

    I have a digital voice recorder (model ICDPX312). I used it for about six months without any problem.

    Now he's giving a message "memory full" when I try to save a new file - in spite of the fact that I have not ALL sound files on the recorder (all have been moved to my desktop computer and deleted from the device).

    When I plug it on my Mac, and 'get info', told me that 1.9Gigs is available (as it should). When I navigate in the folders in which the records are stored, I can confirm that there are no remaining files on the device.

    How to reformat (?) the device so that it frees its memory and I can continue to use it?

    Thank you for your post and welcome to the forums.

    There is a formatting procedure which is on pg 85 users manual:
    http://www.docs.Sony.com/reflib/docget. ... 0,' manuals
    If this does not work please contact the Sony Support by clicking here:

    http://eSupport.Sony.com/us/Perl/suppor... l = ICDPX312

  • Strange reboots and the message "Windows has recovered from unexpected shutdown.

    My computer makes strange decisions. When I got off the computer for a long time and back I find message "Windows has recovered from unexpected shutdown" it happens only when I'm without my computer for an hour or more.

    My Windows Vista 64 operating system

    Hello

    Two ways to solve this problem, a point of view of sleep/hibernation and one of
    the overall performance. Even if the two methods in common, you may need to use both.

    1 I want to erase the General corruption and repair/replace damaged/missing system files:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------

    How can I enable hibernation on my Windows Vista computer?
    http://support.Microsoft.com/default.aspx/KB/929658
    How to reactivate the lack of Hibernate Option in Windows Vista?
    http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

    -------------------------------------------

    Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
    similar are not enabled.

    Shoot sleep problems - hibernation
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
    type of hibernation - see turn Hibernate on / off

    All the default power plans and then set them as you wish.

    I hope this helps.

  • Receive the error message "DISC ERROR C:\PROGRAM FILES\MICROSOFT GAMES\RISE OF NATIONS\ART\OPENING WRITING. MAKE sure THAT YOUR DRIVE HARD IS NOT FULL AND THAT THE FILE IS NOT in USE"in rise of nations?

    Original title: rise of nations

    on the rise of nations, I get this error code. How to fix it. DISK ERROR WRITING C:\PROGRAM FILES\MICROSOFT GAMES\RISE OF NATIONS\ART\OPENING. WMV. MAKE SURE THAT YOUR DISK IS NOT FULL AND THAT THE FILE IS NOT IN USE.

    Hello


    1. do you get this error during installation, downloading or playing the game?
    2. What is the amount of free space on the hard drive?

    Method 1: clean boot the computer and check if the problem occurs.

    To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Note: Follow step 7 to reset the computer to start as usual after the boot process.
     
    Method 2: uninstall and then reinstall the game and see if the problem still occurs.
     

    Hope this information helps
  • 6500 a does not print. iMac w/OS 10.6.7. Message says full spool area.

    My 6500 has stopped printing my iMac, although it doesn't thin test.  (Test sheet can be requested OK computer, not only on the 6500 has).  Operating system is 10.6.7.  Problem of thought was a low-ink warning, but install the new cartridges did not print back.  HP utility present receipt of the file and (briefly) a message that printing is 98 percent complete.  Then a few moments later she stops, displays a message indicating that the "spool area" is "full".  The printer starts to "lazy" and no indication of the file disappears.  Rotation off (wait) and then on new printer did not correct problem.  Is it possible to clear this area of spool, so that the 6500 has going to print?  Thanks for any advice.

    Well Yes, we will reset the printing system:

    -Sys Prefs, Print & Fax
    -Right (control) click inside the box that lists your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  • BlackBerry smartphones HELP! I get the message "memory full".

    When I launch my voice command to make a call sometimes I get a message that says "memory full". What is everything?

    In addition, another thing that drives me crazy is that when I get a call or go to make a call it takes sometimes a lot of time for my phone to 'wake up '. Sometimes it doesn't even ring. I just get the notice that I had a VM.

    Any help would be appreciated.

    Thank you!

    Try a battery pull and also make sure you close your applications when your done with them.

    to close press the bb while button in the application and select close.

  • my pc will not boot up when I run the disc to recover its says cannot find hard drive

    my pc won't start recovery disc tried tried

    Windows 7 disk but will not work it says can't find hard drive

    Sorry do not know all the details of my pc

    I am not basic pc user

    Thank you

    If you use your PC manufacturers recovery disks and don't see "no hard disk" the chances are that the hard drive has failed.

    When you try to boot your PC normally what exactly is the error message?

  • computer HP Pavilion laptop starts with error message disc 1 failed with code 301

    I have a HP Pavilion laptop dv6 - 6033cl running with Windows 7.  In the last days, it starts with the error message: "Test Drive: 1.

    SMART check failed

    Failure ID: RU3TRQ_5KK6PJ_MFH14J-60BE03

    Product ID: LH597UA #ABA

    HARD DRIVE 1 "

    When the computer is running in normal mode, bodyguard Windows sends messages saying that it detects recommeds and failure of disk 1, I perform the backup.

    This computer is more than 2 years old and is more under warranty.

    Can someone, please.

    Thank you very much

    Your hard drive is dying quickly and must be replaced. If you have not burnt the recovery discs again I'd get burn soon or you will have to order from HP. You will need to boot and install Windows when you put the new drive in.

    Burning discs of recovery HERE

    Example of hard drive HERE

  • error message disk full?

    stuff, this site has problems.

    Well, what I need to know, is why I get a 'disk full' error message when I try to save the pictures. This has only started happening, and my records have lots of space on them.

    Check your preferences and see what setting the ram is to and make sure you have a disk of work defined. Then take knowledge of what photoshop reports the amount of free disk.

    Finally, let us know what the resolution of the image bit depth and color. Then your psot a screen capture with the layers panel open.

  • How can I change the display of messages in full screen of the component half

    After a recent update the message is displayed at the bottom of the screen. I want to change back to where the message only opens after that double click to open it but the options or the tool buttons are not there for this.

    Press F8 to turn off the message pane.

  • Can I use the Qosmio recovery discs to recover the Satellite P750?

    I have a Satellite P750 with an irreparably damaged HARD disk and none of the recovery disks. I have a Qosmio X 770, I can make the recovery disks from.

    Both machines were equipped with Windows 7 and the two license codes. Can I use recovery since the Qosmio discs to load on a new HARD drive into the P750?

    I realize that the drivers may be different, but if I can get the P750 operation, I can then correct the drivers.

    I don't want to pay $66 for Toshiba disks, as much as other manufacturers such as Dell don't charge $20.

    No, you can t.
    The recovery image is a package.
    It contains the Windows system, but also the drivers and tools.
    This means that you must install drivers Qosmio on Satellite P and this would make for difficulties.

  • Is it possible to copy a message thread full of one of my contacts on my iPhone 6 and send it to my laptop

    Is it possible to copy a message thread in its entirety from one of my contacts from my phone and send it to my laptop

    I use PhoneView (Mac) but people have recommended TouchCopy (Mac or Windows). PhoneView allows me to archive my messages as .txt files or PDF format.

  • WARNING message windows has recovered from a mistake serious c:\docume~1\hp_owner\locals~1\temp\wer2a35.dir00\mini100311-ol.dmp

    I got this warning message. what it means?

    This means that there was a mistake of some sort and diagnostic information (aka a "memory dump") has been created and saved to the specified location.

    If other things seem to work OK, ignore the message.

    What were you doing when the warning message appeared?

  • Under XP, to message "memory full Windows virtual ', it was expanded to the maximum

    Why my pc keep tracking "full of vertual memory of the windows"? is it possible to see or to empty the contents? I have it developed to the maximum - any help

    What is 'increased to max? "  Do you mean that you have installed as much RAM that the computer can process?  How much RAM you have installed?  How much free disk space do you have?  You certainly don't "expand" your virtual memory to the max as Windows XP 32-bit supports up to 16 files for the Exchange with a size of 4 095 MB each or 16 terabytes of each with the PAE kernel active!

    Affect your pagefile managed system as described here: http://www.theeldergeek.com/physically_setting_the_page_file_size.htm

    When these errors of memory just start appearing for no apparent reason of malware is often because, these parasites often ramp request memory and force an increase in use of page file.  Make sure your machine is virus and parasite free, run a MalwareBytes scan on your computer: http://www.malwarebytes.org/

    If your machine is pest free and then take a look at the ongoing process and startup on your computer items.  Almost everything that you install on your computer wants to start by the computer whenever it is initialized, many, if not most of these things don't need to start when the computer is started and over time the list of startup items can become unsightly and they can consume some rare RAM on a machine with a marginal of installed RAM amount.

    Bonafide software can also be because, sometimes even 'good' software could have bugs or it could be in conflict with something else on your computer and cause a "memory leak".  Take a look in the Task Manager and see if anything it uses an excessive amount of memory.  Check also on the countdown to manage in the Task Manager, anything with 3 000 to 5 000 handles is suspicious, something with more than 5,000 handles is highly suspect as an application "buggy".  To view the handle account click on the view menu and click Select columns...

    John

  • See the HP Message Center, a message, how to recover?

    I use a new iMac and the new printer HP Photosmart Plus.  The center of HP's Message in the watch Dock icon I have a message, but I can't access the message.  I clicked on it, double-click on it and tried the same thing in the Finder window.  I can't find anything in the user manual on the subject. So, how can I get the message?

    It may be related to a message that displayed on my desktop on my black ink screen downstairs. I closed the window and kept using the printer.  I have more available ink, but am waiting for printing to get too light before I have replace the cartridge.  I guess the message indicator can stay on until I have replace the cartridge.  Anyone know if this is true?

    Thank you

    Dennis

    denncaid,

    The center of HP's Message may be bug in Snow Leopard. The behavior I see is that the Message Center icon is marked in the Doc with the messages, but it does not open when you click on it. If I reboot (shades of Windows), I can open the center of messages once and then returned to the previous behavior until I restart again.

    I think I just find a workaround. Right-click on the message center in the Doc and select Exit. The Message Center icon will remain in the Doc, but the message indicator, if any, will disappear. Now, the message center opens when you click the icon. This Quit selection must be repeated whenever you want to open the message center.

    Hope this works for you.

Maybe you are looking for

  • IOS10 location services

    Since the upgrade to iOS 10, Safari gives me an error of position "unavailable" when I navigate to sites that use this feature.  Location service is enabled for Safari and I don't have this problem with other applications.  Is this a known issue? Tha

  • How to quickly remove a field "to".

    I have defined an e-mail account to bcc a designated e-mail address (to be able to add the content of the e-mail of a crm) but I was wondering for the emails I want to go to the bcc, is there a faster way to remove the BCC field without having to put

  • can not print labels from contacts on macbook running El Capitan

    El Capitan system 10.11.3 on Mac Book Pro cannot print labels under contacts.  Screen expands to cover the entire space, so I can't see the bottom, so I have to force quit to exit the same program. Others had problems with their Christmas labels, but

  • HP2000: power hp 2000 on password/admin password

    Was in the system recovery to return to the factory settings and about 5% in it... the battery jumped and when I turned back, there was a black screen with a blue bar ask password administrator or power on password. After that 3 tests it gives me a c

  • Map Quest - the proxy settings view

    Hello Go on the map for our boxes VRTX view, you receive an error "Attention - no access to the internet" and on the same page by clicking Actions - Settings I see that MapQuest uses the proxy settings defined in the preferences - settings on the Con