In XP, trying to change the safe playback mode so I can open a link that is highlighted in a document that I'm reading

Similar Questions

• How can I keep full view TOC (drill-down) in different resolutions Desktop in HR HTML5 2015? I tried to change the resolution, but it does not work. It seems that something to do with OCD mmee

  -In 1st image (zoom 90%), the headings are displayed and you can browse by keeping the full view

  -In 2nd (100% zoom) Image, by clicking on any topic takes you from the full view to the subthemes.

  I need to keep 1 Image seen in different Desktop zoom... Any advice?

  

  In addition to suggestions of Rick, note that the OCD behavior is a parameter as well. For mobile and tablet, the TOC collapsed by default, but you can get the behavior of Fund for these devices as well. If you follow the instructions of Rick, you will also find a section titled "TOC (Tablet/Mobile). You can change the behavior there.

  

• No HDMI Audio, could not play the test tone, cannot change the default playback device

  Hello, I have real trouble with my HP Pavilion dv6-2160us experience (with the i3 - 330 M, no dedicated graphics card) Windows 7-64 bit, SP1 PC and I would be happy to help.

  I created a new thread because, despite the fact that many other people have experienced a problem similar to this and have posted what has worked for them, nothing has worked for me.

  The problem (s):

  My main problem is that I can not any audio to play from my PC to my HDTV HDMI.

  When I plug my HDMI cable on my PC and the TV, the TV is recognized in the playback devices, but nothing he can play.

  When I try to test the TV in playback devices, I get an error "could not play the test tone.

  In addition, I want to mention a few other odd behavior that I think can be a part of the main problem.

  In playback devices, I can't change anything. I can't disable or enable a device, I can not set as default playback or communication devices, and I can't save changes to the properties of the device. Whenever I try to change something, as the default playback device, nothing happens, or the changes are immediately reversed.

  The Question:

  How can I get audio to play through HDMI on my PC (is not a problem with the TV, my other machines HP audio playback over HDMI it is fine)?

  What I tried:

  I tried:

  • Change the default playback devices, which I am unable to do
  • The utilities of reading Audio de Windows 7 running in a clean boot state
  • Uninstall and reinstall the driver Intel(r) Audio display
  • Uninstallation and reinstallation of the IDT High Definition Audio CODEC
  • Uninstall the IDT Audio PC program under programs and features
  • Disable the IDT High Definition Audio CODEC

  Nothing has worked.

  The drivers I have are the latest issued by HP

  How can I get this to work? I would appreciate help.

  I'm at the point where I'm willing to try solutions quite technically involved, so feel free to post those.

  Your expertise is greatly appreciated.

  Thank you.

  OK, I finally have the answer for that.

  If you experience this problem even and you want to fix it, you'll need a PC running the same version of Windows 7 that your PC works lot of work but it works without problems, with regard to this point.

  Here's what I did to solve the problem:

  1. Create a system restore point.
  2. Run regedit.exe as administrator.
  3. Go to HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\MMDevices \Audio .
  4. Compare the permissions and attributes of ownership of this key and all subkeys to your work PC.
  5. Change all permissions and property attributes for interest on the defective PC keys as they are the same as those on the operation of the PC.
  6. Restart your faulty computer.

  I hope this helps. It worked for me.

• Im trying to change the content of my internet but it askes me the supervisor password and I never set one what do I do?

  Im trying to change the content of my internet but it askes me the supervisor password and I never set one what do I do?

  * original title - I do not know my supervisor password by trying to change the content of my internet, how can I know? *

  Hello

  1. what operating system is installed on your computer?

  2. what version of Internet explore is installed on your computer?

  3. you are the administrator of the computer?

  4. what internet content are you trying to change?

  5. where are you trying to change the content?

  Refer to this article on the lost or forgotten password: http://support.microsoft.com/kb/189126 of Microsoft's strategy concerning lost or forgotten passwords

• Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

  Original title: how to change a password for an administrator account that does not work properly?

  When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the steps in the article mentioned below and see if the problem persists.
  http://support.Microsoft.com/kb/947215
  
  Hope that helps.
   

• Some applications play with headphones, and some of them play in my speakers. Cannot change the default playback of helmet device.

  Original title: Headphones working strangely

  I'm having a problem with the audio of my computer. I can't change the default playback to my Apple or my Turtle Beach x 31 headset device. Some of my applications are playing through my headphones, and some of them play in my speakers. When I look at the problem online, he keeps leading me to the evolution of my default playback device. When I right click on 'Helmet of Communication' and select "Set as default device" nothing happens. Not at all. They are defined as my default communication device already, who does not even make sense, since I was on my microphone internal.

  I already tried to uninstall driver "IDT High Definition Audio CODEC". Did not work.
  Sorry if I left out important information. Tell me. I know a little about computers, but I'm certainly not an expert.
  Hello
   
  I suggest you follow these methods and check.
   
  Method 1:Follow the suggestions in this article and check.
   
  No sound in Windows:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2: Uninstall and reinstall the sound drivers.

  (a) click Start, click Control Panel.

  (b) click system and security, click System.

  (c) click on Device Manager.

  (d) develop sound, video and game controllers.

  (e) right click on the sound card, click Properties, click Driver tab.

  (f) click on Uninstall, click Ok.

  (g) restart the computer and check.

  If the problem persists, I suggest you to download and install the drivers manually from the sound card manufacturer's Web site.

  I hope this helps!

• Speakers; The speakers do not work. I tried to change the sound to make it stronger and now I can't hear anything.

  The speakers do not work. I tried to change the sound to make it stronger and now I can't hear anything. How can I fix it?

  Hello

  Did you of recent changes to the computer?

  Method 1:

  Check if your headphones are configured to be used as a Communication device by default instead of the default device, or if the two devices are configured by default. If so, that the fault of headphones, so that Windows will only use when they are connected.

  Check volume settings.

  (a) right click on the speaker icon in the taskbar, then select volume control options.

  (b) click a checkbox on "all devices evolving sound.

  (c) make sure that you have "Default uncontrolled communication device".

  (d) place a check on the speakers and headphones.

  Method 2:

  I suggest you to return the item and check.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 3:

  I also suggest you to see the links and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Cannot change the Mercury playback engine

  Whenever I try to change the playback 'Software Only' Mercury "GPU acceleration" engine, I can't. The section to change the Mercury playback engine, seems to be gray, like everyone said.

  I have read and searched around Forums Adobe, but I can't seem to find an answer.

  I just got the PNY Nvidia Quadro 2000 D. I know that it works with first Pro CS5.5, because it is listed on the site-> http://www.adobe.com/products/premiere/tech-specs.html.

  I tried everything I could think:

  -Uninstalled Adobe CS5.5 then reinstalled Adobe CS5.5

  -Depth of bits Maximum Setected & maximum Render quality (from sequence settings)

  So my Question is:

  How can I solve this problem?

  I had a similar problem with CS5. I checked the ID of the graphics card has been giving to the system (CPU - Z shows for example), and I added this to the "cuda_supported_cards.txt" file in the directory of Adobe Premier Pro. He worked thereafter without hassle. My guess would be to check the cuda_supported_cards.txt file.

  L.

• When I start Firefox, I always "Welcome to Firefos" tab. I tried to change the options for mu, but when I close Firefox, the options return to the origional options before them, I changed. How to fix the problems of St?

  When I start Firefox, I always "Welcome to Firefos" tab. I tried to change the options for mu, but when I close Firefox, the options return to the origional options before them, I changed.

  Looks like your current profile does not work correctly.

  Create a new profile as a test to see if your profile is the source of the problems.
  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Tried to change the desktop image and lost all of them.

  iPhoto was opened I was looking for an image specific, but also decided that it would be a good idea to multi-task with my iMac and tried to change the image of the desktop at the same time. Apparently, it wasn't the best idea. While seeking photos through system preferences, a pop-up asked if I wanted to pass something. I'll tell you... I didn't read entirely, but thought that he wanted to reopen iPhoto in System Preferences, since I had the app open on its own. I clicked 'OK', which seems to be the point of civilization to collapse, as it appears that I lost all the photos stored in my iPhoto library! What I did and how can I fix? Everyone?

  Hold down the option key while launching iPhoto and using more select Library window select the correct iPhoto library

  If somehow you deleted it (nothing you described in your question can result in the deletion of the iPhoto library) and then restore your backup iPhoto library until you have removed

  LN

• In window xp sp3, while I m trying to change the MAC ID of the loopback network adapter, its reflected in the registry but shows don't not in al/ipconfig or network connection details

  In the window xp sp3 while I m trying to change the MAC ID of the loopback network card.

  Its reflecting in the registry but does show is not in the details of network connection or ipconfig/all

  its very urgent for me so please help me out to solve this problem

  Note--> I tried to reproduce the same configuration in 5 systems XP SP3 but no luck! I so think its bug of XP SP3 because even works great for XP SP2 & 2007

  Hello

  You can follow the steps from the link below: http://social.technet.microsoft.com/Forums/en/itproxpsp/thread/0e1bf137-01e3-4dd5-9ce0-d686e6934ce4

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• "Svchost.exe has tried to change the settings. Blocked attempt. »

  Original title:

  Svchost

  When I installed the anti-virus program, I put it up to block any attempt to change my home page, my search engine, or my Web browser.  Since that time, I get a message every time I reboot the computer and whenever I go out to the Internet.  The message from my anti-virus program is "Svchost.exe has tried to change the settings.  Blocked attempt. "Whey is svchost.exe keep, try to change my settings you want?  Is it possible that I can prevent this so that those irritating little messages will disappear?

  Hello

  Read this information:

  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-svchostexe-and-why-is-it-running/

  And also Malware scanner

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Error 'empty user name' blackBerry Smartphones trying to change the password by e-mail

  My password on our mail server has changed, when I tried to change the password on my Storm 9500 I get "user name empty" error when trying to change, but I've typed a user name!

  BLOODY frustrating because now I'm not getting emails at all, my business away from the Office is at a standstill!

  Vicky

  I myself have solved by entering incorrect identifiers express mail on my phone, it took me to the screen to create a new account, I proceeded to create a new dummy e-mail account and when I was finished he introduced me to a list of e-mail accounts, I could access then my valid email account and change the settings and changed the password!

  Sigh!

• Painted Windows Trusted Installer, refusing permission for administrator accounts, while trying to change the paper

  Original title: Windows Trusted Installer, refusing permission for administrator accounts

  I have a netbook with Windows 7 starter.

  Trying to change the wallpaper (trivial, I know) I realized that even as an administrator I am blocked for this. I tried to change the permissions of the records, but the options are grayed out.
  Would be interested to know
  (1) if there is a way around that?
  (2) what are the other rights are denied to me although it is my own machine and me being logged as administrator?
  If there is no way this tour without the upgrade of Windows (paid) or switch to Linux (free)?
  Thanks in advance for any help

  Hello

  Method 1, the only option is to upgrade the operating system. Unfortunately there is no alternative workaround.

• CS5 hurt trying to change the font color

  I use Illustrator CS5 and trying to change the color of the text. I can change for a variety of things, but have been unable to make a brighter blue. I tried to delete the fill colors in the appearance Panel and tried to change the color of the appearance Panel. I tried to stop and restart illustrator, I tried to open new documents various times, but I don't always have the same result. A dull blue, even when I choose a bright bright blue from the color picker. Any suggestions?

  "Dull blue" is a relative term. Looks like the color changes, it is simply not matching the color picker.

  My guess is, you work in a CMYK file and choosing an RGB color which is out of the range of CMYK. You must either pass your RGB file (file > Document Color Mode) or live with the dull blue. If your color is "out of Gamut", you will see a warning in the color picker. Click on it and I will try to choose the closest color that is in the range.