Inaccessible boot device error. New motherboard.

Similar Questions

• Error 0X0000007B (inaccessible boot Device) to start.

  From two days ago, about 8 or 21:00 my computer freezes whenever I clicked on any icon or attempted to open anything. Not even all that normally appears as yahoo messenger and all my other programs popped up. After this has is spent several times I went to safe mode and thought at first maybe it was something with the memory, or maybe the computer was going slowly I went into cleaning disk and deleted files. Then, I went in my add or remove programs and deleted some things more freeing space. After that happened, I tried again and still no luck. Shortly after, I went back to the security mode and attempted a full McAfee scan for viruses. It took 11-12 hours and there is no virus. Then, I went back into safe mode and tried to do a restore of the system for a few days back. I've tried twice and both times a screen popped up error after about 3 or 4 minutes for system restore. After some research I found this means cessation critical object, so I tried a startup repair, it said 0X000000F4 (0XFFFFFA8006881BA0, 0XFFFFFA8006881DD8, 0 X 0000000000000003, 0XFFFFF800022E3540). I tried twice and both times it ended around 124545 887104. That was 1%. Then I went back into safe mode and some more the object of research and discovered that using the F8 key I could try solve the problem. The second, I pressed the button repair he opted for another blue screen this time with 0X0000007B (0XFFFFF98000A069E0, 0XFFFFFFFFC0000034, the last two are all zeros. I learned that it was Inaccessible boot Device. I tried to use my last known configuration after return in safe mode and that did nothing. I then went to my device because Manager that all the time I did research we're talking maybe a driver is not updated. I discovered that my drivers are all updated, but my IR devices has a triangle attention beside him. When I clicked on properties I found it saying: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). I tried many things, and every time that I have either get a blue screen or my attempt does not work. Please help me, if I can't find a solution, I'll be forced to format my computer and restart my computer life. (email is * address email is removed from the privacy *)

  Hi Killace,

  Step 1

  Try the suggestions in the article below.
  http://support.Microsoft.com/kb/922976

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Step 2

  Uninstall IR device drivers...

  A. Click Start, type devmgmt.msc in the start search box and press on enter.

  B. do the driver right click and choose uninstall.

  C. restart the computer and check if that helps.

  Step 3

  Disconnect all external devices.

  Put your computer in a clean boot.

  The following link has steps showing how to perform the clean boot:

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article:http://support.microsoft.com/kb/929135

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Inspiron One 2320 inaccessible AIO, Windows 10 boot device error,

  I have a Dell All In One 2320. When I tried to install windows 10 throughout the system has stopped working. It is now gives me an error of Inaccessible Boot device. what I can do. It worked fine on windows 7.

  Crackers Holy, how horrible a response. Reference Dell... is this seriously the best you can do?

  Devaux, go here, this is a thread on the support site for Microsoft with a lot of information on how to recover your system and get 10 Windows installed: http://bit.ly/1IkgMgU

  Good luck! I have an Inspiron One 2320 also and I do research on potential problems until I update it.

• Stop 0x0000007B (inaccessible boot device) on an existing VM Code, not after the conversion of vcenter

  Please forgive any misuse of terminology that I am fairly new to technology - VMware

  I have a VM I created fee-BONES is win2k sp4.  It worked for about a year with no problems.  During the last two weeks, I've created a few additional VM using vcenter to create the P2V. I noticed recently that my original VM that wasn't an import has been planted with the reading blue screen 0x0000007B (inaccessible boot device).  The virtual machine reached the blue screen with the error even after each reboot.

  For fun, I tried to change the bus type of bus to LSI Logic - a reboot always gives the same blue screen when starting upwards. (So I've switched back to logic of bus).  I spent the server ESXi 3.5 in maintenance mode and did a reboot.  No luck again.  Then I tried to start the virtual machine in safe mode - but unfortunately I still get the blue screen and error 0x0000007B.

  Any idea on what I should try next?  Thank you.

  Hi Paul,.

  Welcome to the forums.

  If your virtual machine has worked for a long time, it must be a problem inside the guest OS or a corrupted driver or registry. Be sure to set up the SCSI controller to its original value. You can also have a look at your storage device, in which case there is a bad block on your physical disk.

  If you need to recover data from the virtual machine, you can join his secondary disk to another Windows running as a virtual disk. Otherwise, you can try to reach the installation CD and attempt a repair.

  Good luck.

  Concerning

  Franck

• Satellite on L9W - B Mini - Inaccessible Boot Device

  Hi all

  I installed win10 and decided to do a complete reset that I gave this computer to someone else to use.
  After the reset, it does not start properly and fails with an "inaccessible boot device message".

  I created a USB boot with a version of win8.1 to install, but no touchscreen or keyboard works, so I can't go ahead with the installation.

  someone had this problem? I want to refer to toshiba that I'm tired of this device

  Thank you

  Hi, I installed Windows 10 and reset mine causing this problem, it seems Windows 10 upgrade does not work properly.

  The drivers for the keyboard and touchscreen are not standard, so are not integrated to the version 8/10 bootable usb. You can get a normal usb hub usb microphone and plug in a usb keyboard/mouse to go or if you have created a recovery drive as Toshiba tell you in the instructions it will actually contain the right key drivers.

  To boot from the recovery disc press FN N (F12) as soon as the machine is running and the Toshiba logo shows, and he will give you the option of what to start from.

• Spill of water caused my HP envy 4 to do that no boot device error.

  A planter fell my laptop asleep (activated but closed) and was there for no more than 5 minutes. Much water has flowed on the HDMI port and the lower right.
  The laptop worked well for a good 30 minutes then I had a sudden blue screen with the code F4 stop. I then turned off my phone and it turned back and the no boot device error apeard even if I turned off the laptop.
  Instinctively, I shook the laptop a bit and it seems to work fine for about 20 minutes, and then suddenly got the blue screen with the stop, even code again. This has happened for about 3 times until I let him all night.
  But now after that I left it all night I can't be on the laptop for more than 3 minutes without the blue screen that appears then the boot device error apears.
  Anyone who could help would be immensely appreciated.
  Thank you very much
  Jacob.

  Thank you, but somehow my laptop is now back up and running how it was before. However, I appreciate your time and your info.

• New har drive, no boot device error?

  Just installed a new har drive in my Compaq CQ57. Order the HP recovery discs. Place the first disc in the disc as instructed and turned on power drive. Now, I get a "no boot device - insert boot disk" message. I thought it was what I had at HP? Any help on how to recover the system, and then reinstall Windows 7? What should I do next?

  Hello:

  Disc 1 of recovery in Notepad, turn on the power / restart your PC and press the F9 key at the beginning of the HP welcome screen to get the start time menu.

  Select the DVD drive on the list of bootable devices, and press the Enter key.

  Watch the screen for additional instructions.

  If the F9 key does not launch the start menu, then press the ESC key instead and select the menu options start from there.

• Acer Predator 17 G9-791-73 CL - no boot device error

  Hi guys,.

  My laptop is an Acer Predator 17

  i76700HQ 2.6

  16 GB OF RAM

  GTX 980M 4 GB

  Basically, the new update for windows 10 destroyed my files, nothing did not work properly, I tried to reboot to a restore point that I created (he has not worked as the girls were damaged) I tried to reset, (same thing damaged files) I tried practically all the existing troubleshooting options (F8) but also to reset the default bios (F2) , I unplugged the hard drive, put it back again, nothing worked so I installed windows from a USB pendrive of freeOS, I removed both of C(main one) D (second) partitions and created new ones and I installed the windows, I lie down, installed all the apps and everything was working fine, until I decided to update the BIOS/Firmware with those specified to install for my model of laptop computer on the site Acer

  BIOS	Acer	1. update of the Micro code 2. Version of update ME	1.10	4.3 MB	12/04/2016
  BIOS	Acer	Fixed not able to enter the BIOS configuration without optical media player utility in the [...]	1.06	4.6 MB	11/12/2015

  The thing is, I installed the new BIOS on UEFI mode and legacy not I don't know if that makes a difference or not, but when the computer laptop restarded, error - no. Bootable Device appears on the screen all of a sudden and it does not further than that, start one and I know not what to do about this I ran tests of hard drive and it works very well, the thing is I am currently on a legacy (in bios) mode and it works very well, I had to change to access my laptop, but the (UEFI mode) does not work for some reason itt continues to show no boot device and I don't know why I tried to reinstall windows again and delete the partitions, but F8 doesn't work on UEFI mode

  Any ideas on what I should do?

  Also, when I try to install new BIOS, I get the error: the version of the ROM file is not newer than the BIOS.

  I'm so stuck right now, this is my first posting of time on a forum for help with a laptop and I got computers/laptops for fifteen years, because I don't want to buy another hard... I tried something on the internet and I can't seem to make it work.

  This guy, I really appreciate your help, thank you

  for UEFI boot, windows must be installed under UEFI not inherited, because there need an EFI partition and the Manager start windows.

  So if you want to UEFI, you must reinstall windows.

  do not forget to support bootable USB of re - install windows (under settings of UEFI) must be UEFI compatible, I strongly suggest to use Rufus to create:

  https://Rufus.AKEO.IE/?locale=en_US

  define Rufus as the screen on the home page.

• No boot device error - early 2014 Macbook Air

  Forgive me if this has been posted elsewhere, I could not find another post as of yet with my set of circumstances.  I have a Macbook 2014 as shown air above 10.10.5 running and have had installed Boot Camp and windows 7 working for more than a year.  Recently, I tried to boot into boot camp and got the dreaded "No. Bootable Device" error.

  When I go to the startup disk in the settings I see BOOT CAMP Windows option to restart, but I get the above error when I restart.  When I restart and hold down the option I am not isolation presented with the option to boot into Windows or bootcamp.  I can see the boot camp partition in finder and disk utility.  I tried to create an installation disk Usb 2.0 with the latest version of windows software support in the Boot Camp Assistant.  I tried to use this drive to try to repair the disk, but cannot use the touchpad or keyboard or external keyboard.  Tried to use a player great external mac with a windows 7 dvd and had all the same problems.  I tried swapping usb ports and don't have anything yet.  I read somewhere that this could be a problem with the Usb 3.0 ports and drivers with windows 7.  Now I'm at a loss on how to recover it without having to reinstall.

  If I can see the data of the boot partition might be the problem?  I don't know what to do next. Any help would be greatly appreciated.

  Beginning 2014 Macbook Air 6,2

  Core i7 1.7 ghz

  8 GB Ram

  Can you post the output of the following commands in OS X Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• HP Pavilion Dv7: No boot device error * HELP *.

  I have an old Pavilion dv7 laptop that does not start because he apparently didn't quite "bootable devices." I looked this error online and once I opened it upward, I discovered that whoever worked on the last laptop didn't turn screws from the hard drive hard drives seem to be correctly connected but my question is, is this the problem?

  Any help would be appreciated!

  Full of error: (Black screen)

  Realtek PKU Express Gigabit Ethernet controller series v2.26 (090219)

  PXE - E61: Media test failure, check cable of

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  ~ Carbender

  Carbender wrote:
  

  I have an old Pavilion dv7 laptop that does not start because he apparently didn't quite "bootable devices." I looked this error online and once I opened it upward, I discovered that whoever worked on the last laptop didn't turn screws from the hard drive hard drives seem to be correctly connected but my question is, is this the problem?

  Any help would be appreciated!

  Full of error: (Black screen)

  Realtek PKU Express Gigabit Ethernet controller series v2.26 (090219)

  PXE - E61: Media test failure, check cable of

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  ~ Carbender

  First, take out the HARD drive and put the screws to the right to maintain and replace the HARD drive and reboot again. It could be that the missing screws causing the HARD drive vibrates too and make the heads and causing the HARD drive having problems.

• HP Pavillion 11-N028TU X 360: boot device error after upgrade to Windows 10

  Hello

  My laptop had been improved automatically to Windows 10 about 3 days ago. It was fine, but last night, he had a funny noise and stopped working suddenly. I restarted my laptop, but it has shown a pop-up notification:
  "not found - boot device please install an operating system on your hard drive.

  This morning, I took my laptop to the IT Help Desk at my University, but strangely I could start it and the connection to my windows without any error notification but it took like a usual (about 15 minutes).

  What should I do with my laptop? It seems to work normally now, but I fear that it will freeze again all of a sudden. By the way, anyone know if I can use my warranty to the United Kingdom if I bought my laptop in my home country?

  Thank you.

  HI @rose0521,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that once your laptop cannot start with the error message "not found boot device" and now is recovered, but you want to confirm that there is no problem with the laptop.

  You can follow the document below to test the hardware of the laptop:

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  If you want to contact HP support to check if the warranty covers service to the United Kingdom, please click http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html for more contact information.

  Please let me know if that solves the problem by marking this message as "accept as a Solution.  To simply say thank you, click the thumb upward below!   If you need more assistance let me know and I will gladly do everything I can to help. Thank you.

  Kind regards

• Recovery Aspire V5 - no boot device error disk error

  I tried to recover my Acer Aspire V5 by using the recovery disk I paid only $44.95 for.  When I got to the point where he is said to remove the recovery disc, then press ok to continue, I thought I was in the HomeStretch.  But instead, I got a "no boot device - insert boot disk and press any key error."  Can not know what to do.  I have no other disk for this computer.  Thought that this disc receovery was supposed to be a one-stop solution to restore my computer to its state when I bought it.  Any help much appreciated.

  Go to the bios and change the inheritance or uefi boot mode. If it is not.

• Reboot and select proper boot device (build new PCs)

  So I have been building a new computer and have finally put it all together, I wanted to check and make sure everything was working and recognised (NOTE: no OS is installed). While starting the computer everything seemed ok, until I got to the restart of the screen and select proper boot device, I checked in the bios to make sure, he was placed under the 1st priority boot device and indeed it was, what I am wanting to know is, is it normal that this message on a new hard drive with no OS installed? Everything is plugged in correctly and tight

  What I am wanting to know is, is it normal that this message on a new hard drive with no OS installed?

  It depends on what was on the hard drive before and how he got to the format.

• Quando instalei o windows 8 o erro 0x0000007b inaccessible boot device apareceu o than devo fazer? e essa Carpi ao lado :(

  When I installed windows 8 0x0000007b inaccessible error starting device appeared what should I do? and this guy here following :(

  Here is the Vista Forums.

  Kindly ask in the Windows 8 Forums.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8

  And this is an English language Forum.

  To find the language of your choice please click on the English icon at the bottom of the page and select your language from the Menu that appears.

  See you soon.

• HP touchsmart r520 1070 uk: 3F0 - no boot device error. Windows 10.

  After having browsed the sites by chrome, I got big lag and and freezes everything. Then, I saw an error with blue screen - watchdog_violation or something like that. I restared my pc and from that moment, I lost access to my data and everything. There is huuge problem with my hard drive... I checked with diagnosis (f2 in the bios) but it says that my hard drive can not be found or it has failed. Help, please! I have a lot of documents on my hard drive. PS All the hard drive cables are checked.

  Test CPU-

  Memory test - passed

  Drive test - failure ERROR 3F0

  Can't do the hard drive recovery, because: "no boot disk was detected or the drive failed.

  Any suggestions?

  I need to know if it is a solution with her... Before buying components to recover my data from broken hard drive.

  Wozon

  Since you obviously know that the drive needs to be replaced, we will address the issue of data recovery.

  First of all, you must STOP using the drive - NOW.  The more you use the player, the higher the risk that you will not be able to recovery anything of him.

  Second, you must have access to a working PC, and for that, you must buy a USB hard DRIVE adapter.  This will allow you to connect this drive to another PC for data recovery.

  Third, you must install the software of data recovery on the work PC.  This is a free version: recover the data in 3 steps with MiniTool Power Data Recovery free Edition - MajorGeeks

  If that is not what you want to retrieve, here is a better app, but it's only free to try: Active @ File Recovery is looking for the lost and deleted files, recover damaged disks & RAID volumes

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================