Inbound and outbound ACL question

I want to restrict inbound and outbound traffic with access-lists on my PIX 515. May be this is a stupid question, but I don't know how the acl pix treatment directions of traffic. Let's say that I encouraged in traffic ntp to the outside to the inside host inbound_acl, I need to open port ntp also in the outbound_acl pass the ntp response?

Is it the same for the other direction (inside origin traffic)?

Thanks for any response.

Hello

If you open port NTP of outside inside the host, PIX will maintain this session state and will return by the hosts inside circulation. The default is no ACL out (ACL equivalent to entering on the inside of the interface). The statefull inspection rule is the same for all directions/interfaces.

Thank you

Nadeem

Tags: Cisco Security

Similar Questions

  • Each inbound and outbound e-mail shows wrong time

    Each inbound and outbound e-mail shows wrong time, but I do not see where them reset the clock of Thunderbird. The portable operating system setting is fine.

    Thunderbird uses the computer's clock.
    The time is maybe OK but what about the time zone setting?

  • [SOLVED] Controlled East window firewall on inbound and outbound connections?

    I would like to know if the window firewall on win 7 Pro 32 bit control of incoming and outgoing connection or not.

    Would pop firewall all incoming connection or outgoing unknown for confirmation?

    Does anyone have any suggestions?

    Thanks in advance for your suggestions :>

    Windows 7 firewall allows you to create your own rules for inbound and outbound traffic. With them, you can control programs, services, ports, and machines. Better to have a look at the control panel / Windows Firewall / Advanced settings.

  • How reset you the traffic inbound and outbound e-mail in Outlook Express servers?

    I tried to send some pictures to print to an email address on my account my file/folder of photos aol via Outlook Express (its my fault), but it failed.  Acordding error message I have the bad Inbound & Out bound mail servers.  They are currently set to "PoP3" & SMTP respectfully.  So how can I do to fix the right of e-mail servers?    Thank you for your help Out There... djs

    If you do not use your account to send AOL from, then you must go to tools | Accounts | Mail | Properties and then under servers, set the correct and less advanced as well.  These values are obtained from your e-mail provider.  See if there are instructions on their Web site to use OE and what parameters to use.

    Steve

  • I forgot my email of rescue and my security questions

    I want to change my apple id passwoed by the way I forgot my email of rescue and my security questions and I can not change pls help me

    Greetings and salutations, jonach!

    Welcome to the communities of Apple Support! Regularly, I change my password Apple ID as well so I understand your dilemma! I'll be more than happy to help with this.

    If you forgot your Apple ID security questions answered - site Apple ID has been redeveloped by making it easier to do what you need from your computer. Just follow the information provided in this article.

    Have a great day!

  • Satellite L500D - SSD and RAM upgrade question

    Hello

    Who are you? Ttime for some great upgades for this laptop and some few questions and I'll be happy to answer for me.

    1. is there an empty space to install a second hard drive SSD?

    2. If there is not can put off the hard drive DVD and in the empty space to fit an SSD? I need something like that? ---> fb4d http://cgi.ebay.com/CF-Card-2-5-Serial-ATA-SATA-SSD-HDD-UDMA-Adapter-/190537923405?pt=LH_DefaultDomain_0&hash=item2c5cf1
    This is an adapter.

    3. the quantity of RAM max supported Satellite L500D? I installed 2GB and I have an extra plug and I want to install a single 4 GB RAM and 6 GB RAM total

    Its sounds good to you this idea? I thank you and have a nice day

    Hey,.

    As you can see on the underside of the laptop doesn t supports a second HDD because there is no second Bay HARD drive on the underside.
    The map you posted is unofficial so no one can say whether it compatible s part or not. For laptops Satellite AFAIK there is no CD/DVD Bay adapter, but you can ask a provider of service authorized for more details.

    The maximum RAM capacity depends on your phone model correct. L500D was delivered with different hardware, so you must post your exact model laptop number.

  • I forgot MY E-MAIL of RESCUE and my SECURITY QUESTIONS.

    I bought a gift card of $15 iTunes buying an app on the App Store, but he asked me to meet my security questions. I thought I knew them, but they were wrong. I ended up trying that so many times he ended up blocking of my account. He asked me to try later or use my email to rescue more. I press 'Use rescue Email Address', but is to be insensitive. I went on my id to iCloud pressed apple to phone then security security and passwords and press on question said that my email has been sent with half of my email does not appear I enrolled in my gmail, but had no email to unlock my account I tried everything can do this?

    PS I am also certain that it is the correct address, and if by a chance, I put the email address wring as rescue me how can I change?

    Unless it is in a spam filter, you have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

    (138471)

  • RAM and GPU update questions about the Satellite A60 652

    Hello

    I have a question about my Satellite A60-62. I want to upgrade the RAM, but I do not know what kind of chip that I have to do and how that insert into the laptop.
    I also want to get a new card to my video graphics, I currently have "Radeon Mobility IGP 7000', is this possible, and the same questions again, what card do I need and how to I insert in the laptop..?

    Thanks for any help.

    Hello

    The works of A60 with PC2100 and PC2700 memory.
    The maximum is 1536 MB.
    Toshiba part numbers are:
    PC2700 256 MB PA3311U - 1 M 25
    PC2700 512 MB PA3312U - 1 M 51
    1024MO PC2700 PA3313U-1M1G

    The graphics card cannot normally be improved.

    Good bye

  • Windows 7 full screen games and desktop applications losing focus and stealing discussion questions

    NOTE: The updates at the top of this announcement, the original message is less than.

    UPDATES: here are a few updates and new information that I have gained since the original publication.

    Registry settings

    After doing a lot of reading, I found some registry settings that appear to solve some of the problems I see. All three were found in HKEY_CURRENT_USER-> Panel-> Desktop

    ForegroundLockTimeout: Has been reset for some reason any. I removed the key and restarted, but he is back to zero. This is why I looked at the default value of 200000 (decimal) and set it. After that, he stayed. \

    I saw two other keys HungAppTimeout, WaitToKillServiceTimeout, and WaitToKillAppTimeout and all have been set to zero. I deleted these registered.

    I have no idea what set these registry keys to zero, but after being put into default, I can now click on an application full screen reduced, and he returned immediately. I can still lose focus in full screen or desktop app, but not as often as before and now he is usually just badly behaved apps stealing focus rather than seemingly random events.

    I wonder if there is a patch that has changed these values, or a settings option that does. From what I read, they are sometimes twisted to allow faster restart and stop servers.  I don't have a software that would be while and manually set their and none have the people I know. One of them has confirmed that their box also has these set values zero and has no idea why.

    I hope this information is useful to other people with odd focus problems.

    ORIGINAL POST FOLLOWS *.

    I have a problem in Windows 7, which at first I thought a number of different problems, but I am more convinced that they are all connected.

    All of them started to happen around the same time - late January or February after a Windows Update - and largely the same or very similar issues affect 3 of my friends and co-workers running Vista and 7. Unfortunately my notes on the update happened while the time are missing, but all 4 of us have seen questions start at the beginning of the year in the January/February calendar, which makes it seem like they should be linked.

    NOTE: There were a few minor problems before even with the update, but nothing like what happened in early 2011. I had problems to update with Vista and 7 alone, but they were rare and sometimes fixable with registry hacks or it was an offending program, something did not like Aero, etc..  The questions below got a lot worse in early 2011 so they appear together in this post.

    I will describe each problem separately and the affected BONE and the symptoms, and I hope that some can make sense and help me solve the problem. Major problems first, then a few small problems and measures that I took to the to check follow after. Sorry for the long post, but it's a maddening problem affecting many people, and I want to be as complete as possible.

    Games not switching and the apps full screen #1: if I'm in a game fullscreen and I go to the office, it is very difficult to go back. If I click on the taskbar icon, nothing happens. I have to click on it repeatedly, often a dozen times or more before the application full screen or game is restored. It is most often with the games. Full screen I don't want not maximized, I mean where a program takes the entire screen. Games is easier to reproduce so far have all I currently use the question and variances in how it is difficult to come back in full screen are not significant between them.

    Apps full screen #2 focus lost: this happens especially to my friend running Vista, when you play the game full screen. She will play something like the Lord of the Rings Online and she loses the keyboard focus and the mouse, but the game is always full screen. Usually the only way that she can solve the problem is to use CTRL-ALT-DEL to bring up the Task Manager, which for some reason solves the problem and she can return to the game for a little while that. I run Windows 7 with another couple of friends and we can also see this question, it is much less common. Changing an old mouse seems correct for Vista for some reason any. 7 that it happens rarely, if hard to duplicate to see if changing the mouse would help. In any case, will and against a beautiful new mouse laser mouse is usually a horrible option.

    Office applications #3 lose focus: it affects two of us under Vista and 7. We will be typing in chat, email, anything... and the foreground app will lose focus. What catches there that is impossible to determine. In my case, I can occasionally see a taskbar popup button and then disappear immediately, but I have never been able to track it down. Running in safe mode or boot seems to have no effect on this, or disable all services, extension and program but by default Microsoft in Windows 7 and Vista. Its almost like a Microsoft program is to do. Also, even though I mentioned the taskbar icon appears briefly from time to time, which cannot be bound: it does not always coincide with the loss of focus and is not always present when the focus is lost.

    #4 desktop applications lose keyboard focus and the mouse: it's like the number #2 above, but happens at the level of the office. Unlike the #3 that the window does not lose focus, it is always in the foreground, but keyboard and mouse stop working. It is usually impossible to move to another window. Just like #2, the solution that we have so far is to use CTRL-ALT-DEL to switch to the Task Manager, which temporarily solves the problem. ALT-tab through windows does not work.

    Here are other minor problems that may or may be linked, because they seemed too much to start with.

    Switching away applications full screen takes more time: Windows 7 on my machine, switching off games full screen takes more time than he did in the past. It was a minor issue in autumn 2010 and became much worse early 2011.

    Some windows lost focus while being re-size: if I take the corner of some windows for re - size, sometimes the re-size operation stops until I release the mouse button, as if he has lost the focus. Color of the window indicates usually focus however is still there, and grabbing the corner once again we will move me a little more. It may take several tries to get the window size as I want, as the re-size operation closes several times before I release the mouse button. This affects only 2 of the 4 people I talk so much that I can tell from our conversations and shared between Vista and 7. Both of us have Logitech mouse it might even be a driver problem, but using a mouse cheap test has not fixed the problem with me.

    Firefox: Firefox repeatedly will "dim", where Aero makes the window lose color to indicate that the application is not responding. It didn't happen before January 2011 for any version of Firefox.

    Concrete results to track down the problem:

    I ran programs like WhatHang and others who are trying to catch the programs that are suspended, stealing focus, etc.. Hours of testing found no results except that Firefox crashes frequently. Disable Firefox doesn't solve all the issues however, so I guess that its not related.

    I tried booting safe and clean, and they have had no effect. Secure boot is rather useless since I can not usually run programs that show the problem more easily. I also tried turning off everything except what comes with Windows 7, and it had no significant effect.

    I tried to use a different mouse. While it helped a bit with one of my friends, it only helped me so far. Different mouse drivers do not seem to help either. I also tried various nVidia without significant information acquired or corrective drivers.

    I also ran through various other ideas here as the race of the file system scanner and so on and not found any problems with my system, and where I could help my friends do and they also found nothing of note with maintenance and verification tools.

    My friends and co-workers: most of them are not local to me, so my focus of their issue has been rather limited. The main thing that we all have in common is that we had some minor problems in the past, as in 2010, and they've all got a lot worse in early 2011. Unfortunately none of us kept of records accurate enough to indicate any special updates that might have caused it.

    In any case, I apologize for the log message, but this issue emphasis is maddening. Its become a frustration serious then I thought to post information on the problems which seem related would be the more useful approach.

    I am a graduate of comp-sci systems and a companion systems programmer, and I have tried everything I can think of to debug and isolate problems, symptoms, etc. and had no chance. My friends are usually illiterate computer so that they are even more perplexed and frustrated by this problem. In my reading the forums, I see a lot of Windows Vista and 7 discussion questions, but rarely a lot of details, and when a problem is identified, it this far does not apply to me or my friends.

    I am happy to provide any other details I can.

    Updates:

    I forgot to mention that I have a Setup dual monitor. Aero seems unhappy with it, a lot of flicker when switching to full screen in games and other applications. I guess its because a single display off Aero while the other has it we or maybe not accelerated. Remove the second screen does not solve the problems I see, but I mention it in the interest of further development.

    I want to just chime in that I see similar (but not exactly the same) behavior and time seems to match as well. Among the updates must have messed something up. I forgot my Cardinal never update rule anything :/

    In any case, I have a few specific questions all problems related to full screen/window/input. When you play the Witcher, when you look at, if the mouse touches the edge of the screen, it stops, thus giving a very narrow range of angles I can watch from. Baldurs gate, as soon as I hit any key, I can't click on anything whether (and what I typed does not appear). Looking for police 3 (dosbox) it works fine until I hit a key, and then the mouse bounces oddly around the screen. If I alt - tab, in these 2 cases to last and go back, the problem is solved until I have a button again. In the case of the Witcher, if I alt tab and click the icon to the taskbar, it seems this problem, until I have a press.

    And I'm sure I had none of these problems a few months ago. I have tried everything I can think :( I tried the registry settings, but they do not seem to help.

    Edit: Oh, almost forgot. Whenever I click on full screen on an online video, like youtube, it appears in the background behind other windows, and then I have to click on it in the background to bring it forward. Very weird. Not sure if it's related. I'll try to change my video drivers... So boring when everything was working fine a few months ago.

    Edit 2: Do not take into account my post, I had a program called synergy race (usually use a mouse on multiple computers at the same time). Apparently, he was the problem.

  • I said that someone else is using my email address, and my secret question has been changed: error 0x800488FE.

    They say that someone is using my email address and my secret question has been changed. error 0x800488FE

    original title: MY EMAIL ADDRESS IS BLOCKED ERROR 0X800488FE

    Hello

    Who is your provider of mail service?

    If you use the Hotmail account then the question you posted would be better suited in Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  • ACS and download ACL for multiple clients-AAA

    Hello!

    I need to know if it is possible to download ACL on the DACL device that is not a part of the conversation of RADIUS? In other words, I have a user who needs access to certain resources and attempts to connect to the network via PIX1. I need to authenicate it by ACS and download ACL PIX1 and (attention) PIX2 also (some firewalls upstream). Is it possible to do?

    I don't think that you can do. As you mentioned that the other PIX has no Radius configuration. And you can push only DACL of the Radius on the PIX server, she asks, not in any other PIX.

    And I'm not aware of any mechanism or feature, which allows you to transfer the downloaded ACL of one PIX to another.

    Kind regards

    Prem

  • 2.8 LCD screens reset multiple CHOICE and true/false questions

    Multiple CHOICE and true/false questions work fine once only. After that, activity displays all the hidden data. Question must be reset and allow you to select a Merry again. Please I need help to make it work.

    Finally, I solved this problem by:

    1. by changing the Settings.xlm file:
    \lcds\courses\coursename\course\platform\settings\setings.XLM

    2. change false the variable 'assessments_persistResultsInLms '.

  • Need to reply and report interview question and Oracle Forms 10 G

    Hi gurus

    Soon, I expect my interview for Oracle Forms and Reports 10 G, I'd appreciate it if someone provides me with assistance to find the answers and the related question. Thank you

    Concerning

    Shu


    Hello

    Google is your friend

    http://www.coolinterview.com/type.asp?iType=64

    http://asset-9.soup.IO/asset/10511/3383_9441.PDF

    http://javarevisited.blogspot.com/2012/12/top-10-Oracle-interview-questions-and-answers-database-SQL.html

    Amatu Allah

  • VMware and answer interview questions

    VMware and answer interview questions

    I think that he referred interview VMware software-related issues, but he fails to mention the subjects he wants to have answers

  • Questions and the Quiz Question box misalignment Cap 7

    I work in the latest version of Captivate 7.0.1) subscription version and added a question true/false quiz at the course. The inserted question aligns the selection 'box' (circle) correctly for the first response, but not for the second. This is true for the multiple choice questions as well.

    The master looks very good, there is no extra space in the text of the question (it occurs without the addition of content), there is no way to close the gap of space. If I move the text, the misaligned selection box moves with it and keeps the difference.

    I imported a question of another master, and it works very well, so I have a workaround, but I would like an answer to what is the cause, so I don't inadvertently re-create the problem if it's my fault. And if it's a bug, then Adobe should jump on this one.

    Images - example misaligned

    misalign.jpg

    and aligned example imported from another master

    misalignnot.jpg

    Uncheck the Auto size legends in Preferences > by default.

    Anthony

Maybe you are looking for

  • I ran out of items in my navigation toolbar.

    I have a lot, a lot of missing items, actually. The only two things about this are back and the arrows forward. I tried all the steps listed to existing Firefox article called 'Back and forward or other toolbar items are missing', up to and including

  • An old email address/apple ID and password.

    I started using iTunes a long time ago and I bought a lot of music with an old email address and apple ID. I don't have the password for this code. I would like to delete the music and simply eliminate the error messages that I get from time to time.

  • XP Home to XP Pro update fails due to the 'file not found nvrd32.sys.

    I bought an installation CD of Windows XP Pro service pack 3 from a retailer of party 3rd update of XP Home and at halfway through the installation, I get an error message: file nvrd32.sys is not found. The seller sent me a replacement and the same e

  • He had to turn a page at a time

    He had to turn a page at a time

  • My battery gives me a battery replacement in decline

    My Alienware M14x is giving me a notification that says consider replacing your battery.   Then I came across your website, but I can't find my battery of computers. I looked online and found a lot of batteries who say they adapt to my computer, but