Incompatibility of latency

Similar Questions

• AEBS latency problem

  Hi all

  Recently I had a problem of serious latency with my 6th Gen Airport Extreme (model AC), which happens on the wired devices and connected wireless is not a wireless issue.  I tried a number of things to eliminate this problem... Rebooted the modem cable, restarted the AEBS, reset the AEBS to factory settings, downgraded the firmware as it seems to have started shortly after the 7.7.7 update, made sure that I wasn't sharing WIFI channels with the neighbors... None of these fixed the issue.  Just to make sure that it wasn't my access provider or the Internet in general having a bad week, I pulled out my old Netgear router, have everything connected to it and the latency problem disappeared.  I used it for a few days to make sure.  I have also connected my old Gen 4 AEBS and still no latency. I hooked the 6th Gen AEBS upward and returned latency, so I don't know what the source of the problem.  I tried to adjust some settings, but since this is the case for the cable connections and wireless, I guess it's more a hardware problem a matter of possible interference.  I have probably travelled all the troubleshooting steps, but thought I'd throw it out there when even to see if anyone else had any suggestions.

  As a side to this note, I'm having a specific problem specific wireless.  Quite regularly, the individual devices are slowed to a crawl.  That is, for the moment my iPhone is listed as having a connection 802.11a/n/ac to 433Mbps, but after a while (sometimes hours, sometimes days), it will be reduced to 1 MB/s 802.11b/g/n.  One.  Although I am less than 10 feet from the router by means of a direct line of sight.  This also happens to my iPad, MacBook, iMac, actually all devices using a wireless connection.  The only way to remedy this is to reboot the router, restart the individual device doesn't fix it.  I got to the point of having to manually restart the router one or two times a week to make sure that everything is connected.  Products like Apple WIFI had some kind of keep alive or scheduled reboot setting.  Again, any thoughts?

  Thank you.

  A few things come to mind:

  1. A number of Internet service providers began to role over IPv6.
  2. A possible incompatibility between the modem and your AirPort base station. Specifically, if you have an Arris / Motorola SB61XX-series modem.
  3. Your base station is defective.

  We can try to help with any part of these elements.

• There is Airfoil and Airport Express, latency/delay time?

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  But the audio output should be "real time." in other words, no delay or latency at all. Both are in the same room!

  I use notation software (Sibelius) and need to hear what I write immediately. Unlike streaming where I think there is an acceptable delay (2 seconds?) for the buffering?

  Is this possible please?

  If it isn't with AirFoil, any advice on how welcome :-)

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  With AirPlay (or Bluetooth), there will always be a form of delay or latency with streaming audio.

  In this scenario, an audio stream (on AirPlay) will go first to your iMac to AirPort Extreme and AirPort Express Terminal.

  To help understand why there will be delays, let's look at high-level "behind the scenes" about how works AirPlay:

  For the AirPort Express (AX), audio input is provided mainly by iTunes. Of course, it can also get feedback from other sources as you know, as of Rogue Amoeba's Airfoil.

  For streaming, iTunes or wing does most of the work. What is app reads audio content standard (AAC, MP3, audio books, Internet music streams, etc., it decompresses these file formats and creates what is essentially a raw, uncompressed audio stream.) This stream is compressed using Lossless Compression of Apple (via a QuickTime codec), encrypted with AES 128 bits and then listened (airplay) with an AXE. The stream is buffered for about 2 seconds until the stream is sent. The AX deciphers the flow, decodes and exports in a digital or analog PCM (using a built-in DAC) flows to its audio analog-to-digital versatile optical port.

  So, with the above, you can see that the tone does not simply move source to the destination without much more things. You will not be able to entirely eliminate the delay. Sorry!

• What should be my time to latency resulting?

  Please can someone tell me about what my time of latency that results should be in the Prox 10.2.4 logic?

  I use an interface Apollo Twin Duo Thunderbolt, with a Macbook Pro 15' 2015 of the retina, Quad Core 2.8 ghz, 16gbRam, El Capitan 10.11.3

  In preferences, it indicates the size of buffer 64

  Result 10.2ms (exit 2.1ms) roundtrip latency

  Is this normal?   If this latency is high, how can it be reduced?  I bought the most expensive interface that I could afford!

  It's causing you problems?  Placement of record does not affect latency.

  You can hear with the help of a live microphone or guitar/bass input.

  The round-trip latency is high given the size of buffer, which means that somewhere in the chain either Apple or AU-Apollo has added additional buffers.

  My material RME under Snow Leopard under Logic-9 shows:

  Buffer size 128 round trip latency 7.3ms out 3.7

  "" 64 4.4ms roundtrip latency output 2.2

  ««32 2.9ms roundtrip latency output 1.5»

  Normally the return buffer size is double (or slightly more) that the latency of the output, so in your case, it would be between 4.2 and 4.4ms. The pilot of Apollo or logic or the last OSX added buffers. I wouldn't be surprised if it's not Apple Core Audio, which uses the extra buffering... recent Mac operating systems are too heavy top and ineffective even if it's not that noticeable that the whole system is the additional use buffering, which is why so much RAM and open disk space is necessary. There is also the possibility that the extra buffers are part of the Thunderbolt interface?

• Incompatibility of wacom El Capitan

  Hello

  I work on a macbook pro (15-inch, mid 2010) located on El capitan, with the last update (30 days ago).

  I own a Tablet Intuos 5 Pro medium. He has recently stopped working. In India, I watched all of the threads for community, which asked me to uninstall / reinstall the driver, check the power supply etc.. I followed it, nothing helps. I then contacted Wacom in India, which directed me to the Asia Southeact of Wacom. They contacted me, told me the same steps and then put me in touch with the Wacom service center, which is located in another city.

  The Service contacted me and gave me a very heavy estimate for 'replace' what they have diagnosed as a defective part. The estimate is almost as much as a new one.

  So I bought a a new average tablet from Wacom yesterday.

  It also refuses to work on my mac.

  Doing some research, I found out about problems of incompatibility with El Capitan (!?)

  Since then, I have tried all of these suggestions online on various community groups:
  

  (1) uninstall / reinstall the latest version of the driver. A tried. failed.

  (2) uninstall the driver from wacom and apps, 'repair permissions' (via the terminal) and reinstall. failed.

  (3) create a separate user on the system, install the driver it and then re - connect to the original user and this is!... failed.

  (4) install an older version (5.3.6 - 6 is the last, and I tried 5.3.0 - 3 and 5.3.5-4).) failed.

  (5) even tried the latest driver for Intuos, Wacom Europe series according to working with El capitan (WacomTablet_6.3.15 - 3). failed.

  (6) the son of Apple community suggest I remove items for the opening of my preferences system, driver uninstall, reboot, reinstall... This does not work too.

  
  

  Through all these stages, it comes to mind that my original Intuos tablet is perhaps also a victim of this incompatibility! ??

  Am shocked by the inability to answer of Wacom and incompetence to provide the latest drivers (latest driver is released in January 2015). Am also disappointed by El capitan for not being the powerful operating system that it was supposed to be, if it can solve this little problem.
  

  Can someone help me out here? Or do you think I should downgrade and return to yosemite?

  
  

  -abhiroopa

  http://www.Wacom.com/en-us/support

  OS X El Capitan: revert to a previous version of OS X

• At Kaspersky Internet Security 2014 addressed all the issues of incompatibility?

  I uninstalled FF23 due to problems of incompatibility of the KIS and have now upgraded to KIS 2014. There are signs Kaspersky has solved the problems before I reinstall FF?

  I ask Kaspersky on this issue. They responded that a patch was to come. Then, they couldn't say. Disappointing, seeing that Firefox is the browser side top.

• Latency

  Hello

  I am using Logix pro X for about 2 years now with a focusrite scarlett 6i6 and a mac book pro with the lates OS.   I have never had any latency issues ever...  Even with the full sessions using VSTs in the edge.    Now, all of a sudden since the last OS update I audio latency all the time.  His kills the atmosphere so much.   Buffer is set to low I have changed nothing in my usual game to the top.   Someone had it happen to them?

  Help, please.

  Yes, a lot of people. I assume you're talking about 10.11.4?

  Is there a newer driver (or Focusrite there a 10.11.4 driver compatible?)

  If this is not the case, to help restore your backup from a previous good system.

• Can not correct 'incompatibility of cookie.

  use a web page to about 2 months of access email through google mail. Now open in Explorer. Have you tried the suggestions online to solve the incompatibility of cookie: clear memory cache but has not worked. Tried to uninstall and reinstall Moxilla but has not solved.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• HP 15 laptop: atheros wifi causes extremely high latency peaks

  Windows 10 has been the only OS I have used, so I can't speak for others... I noticed that (initially copying files via wifi lan has shown) using wifi really totrures my laptop... it's worse than if the CPU is 100% responsible...  I've updated either, but nothing helps... Tried 2 win10 distributions, but still have the problem:

  Wired LAN:

  

  WiFi LAN:

  

  Even when I am simply navigate using wifi I think it's a torture for the laptop... (and bluetooth it also causes)

  PS (the 2nd screenshot is taken when im close enough to the wifi router) if I get still the wifi router the situation is getting worse (the laptop is fully charged (100% red spikes) without reason...) The same phenomenon occurs with different routers

  (Even though the mouse pointer and the sound almost stop, offset)

  Qualcomm Atheros Extensible Wireless LAN device - Qualcomm Atheros Communications, Inc. driver.  -10.0.0.318

  Realtek High Definition Audio 6.0.1.7634

  Update (from native f.12) f.42 BIOS did not help...

  I did a clean win10, install and (instead of downloading drivers from HP myself) let win10 to install the drivers he wants. Now, the problem seems solved! ))

  

  If a device is still 'unknown ':

  

  I presume that it is the «realtek card reader» Maybe the high latency will appear when I intall the driver manually... But I'm not yet... Later if we need in the player card, I'll make if the problem occurred...

• Satellite A500-1 - latency USB problem

  Hi all.

  I have problems with my USB latency. It doesn't matter what I've done in the audio interface. He returned always dropouts.

  Help, please

  Hello

  What are the USB devices connect exactly?
  This happens only with connected devices or on internal speakers too?

  Are you running the factory settings? With these settings, it should work fine and also check that this latest version of the BIOS is installed.

• Incompatibility of modem satellite A10

  Hello
  A few months ago, I bought the laptop satellite A10 in Australia. All the time I've been able to, I was very sattisfied with it.
  Now, when I moved to the Slovakia, I realized an incompatibility of modem dial-up, so the modem does not work in Slovak telecommunications network.
  Is it possible to install a firmware or to do something about this modem won't work in this area?
  Thanks for help

  Bishop

  Hello
  Checked the modem country settings in the control panel?

  Good bye

• 1 second latency since 3.2.3.  Tascam US-1641

  I'm at my wits end with Mainstage questions.  I hope someone can help with this very specific question.

  All of a sudden (I think only it coinsides with the 3.2.3 update, but I can't confirm that for sure) Mainstage experiences extreme latency of 1 second or more, whenever I use it.  I think it's a problem with my Tascam US-1641 because that disconnected from the system and using the system output works fine.  If the audio interface, how can I know if the purchase of another we won't get the same problems?

  Gear:

  * Macbook Pro 15 "retina 2015 -.

  * Interface USB Audio, Tascam US-1641

  * 2 USB Midi keyboards (MPK49 and Keith McMillan K-Board)

  * USB Hub 3 - only keyboards plug into it.  Interface goes to the Macbook to another USB port.

  What it does:

  * Latency is on the audio output only.  The MIDI activity is on-site with triggers

  * Standby time does not improve or worsen when you change IO buffer size or the latency of the driver settings.

  * Move to the output of the system solves the problem.  Latency is gone, but not through my audio interface of course.

  What I tried:

  * Advanced setting of the audio settings as stated above without any result.

  * I had stayed on OSX Yosemite for as long as possible.  As a last resort to try to solve this problem, I upgraded to El Capitan, but it did not fix it.

  * Establish a global production such as recommended by some Apple support forum discussion.  Sometimes it suits momentarily, but it always returns.

  Sometimes change settings such as the implementation of outputs overall or change the Format of the digital output in the control Tascam US-1641 and S/PDIF back panel again the problem will be solved for a minute or two, then the sound glitches and goes immediately to the second 1 latency.

  Post edited by: Ryan19853

  The title should be changed to make it clear, I don't mean the "Massive" plugin, but rather I was calling the massive latency.

  Sorry if this is something you have already tried, but have you updated your interface with drivers El Cap?

• See appeal of latency?

  First of all, let me say I'm sorry if this question has already been answered or if this isn't the right place to post this question. I looked around a bit and can't seem to find good answers.

  I was wondering if there is a way to see the time of latency, or other specifications, a call that you are in. Also if there is a way to make Skype completely close when I hit the red X that is supposed to close an application. Thank you for your time!

  When in a call, call-> technical information call open.

• Latency of the display on the Satellite P100-324

  Pls can someone tell me the latency of the display (Toshiba Satellite P100-324)? (I read somewhere that there 18ms... it's true?)

  Hello

  I found the info response speed (Raise + autumn) East of 25ms.

  Good bye

• Qosmio F10: After Vista upgrade common module blocked due to incompatibility

  I was wondering if anyone has a solution for this. I have upgraded to Vista ultimate and have gotten most of the things to work but on each startup, he said that the common module driver from Toshiba has been blocked due to incompatibility.

  Most of the things work it just seems to be media and SD reader card buttons that have no card.
  All ideas welcome.

  Hello

  This message appears because you have updated the OS from XP to Vista and common modules installed are not compatible with the Vista operating system.

  Is Toshiba didn't publish the drivers and tools for this laptop and it's why some features don't work.

  That's why I don't recommend to UPDATE the XP to Vista, but to clean install Vista on the second partition.
  In this case, you will be able to use the two BONES. XP and Vista.