incompatible application when the EZ Grabber execution error

Similar Questions

• Hallo why? When I update ios. When the image has finished error itunes and usb

  Hallo why? When I update ios. When the image has finished error itunes and usb

  Connect the iPhone to the computer that you are synchronizing usually with

  and follow the prompts to iTunes on this computer. If you

  do not generally in sync with a computer, you should always use

  iTunes on a computer to complete the update.

• How to run an application when the cell phone is power on

  I want to run an application when the cell phone is power on. It runs in the background, how so, please give me a code, I don't know, thanks

  It is enough to set project properties in JDE as shown on the attached photo (check below: screenshot.png).

• Is there a way to remove the ToolTip that contains the name of the application when the cursor over the icon in the dock?

  Since the upgrade to El Capitan, I noticed that the name of each application in the dock appears above the docking station in a bubble of large text when the cursor is everywhere down in the dock next to this icon of the application.  It's annoying because if I'm often pass between two or several applications, I don't want to have to keep moving the slider to the top of the screen to get the text balloons to disappear.  When the application names are present, they cover part of the screen of the app that I work.  Not sure if I remember correctly, but I thought that those who went after a period of time in older versions of OS.  I was never bothered by it as I am with El Capitan.

  Thank you all.

  Not that I am aware, no.  There is nothing in the system preferences-> Dock that allows you to disable or remove this function.

• System hangs when the computer sleeps with error KMode_Exception_Not_Handled after generation installed 9926

  Since the new version update (9926), whenever my computer goes to sleep or when it is left for several hours compress I get unhandled KMode Exception error.  I deleted a suspicious program who has problems during the previous generation, but that made no difference.  When the computer restarts, I wonder if I want to use the previous windows platform and I encounter the KMode problem, but after a day or two, the computer did an update to 9926 and I started having the problem again.  I looked for all devices that are evidence of a driver problem and have not found any.  Tech is able to examine the file DMP to give me a clue as to the program/device must the fixed driver so that I can get past this error?  Here is a link to the folder that contains the file.

  https://onedrive.live.com/embed?CID=932A5B907D806E8A&RESID=932A5B907D806E8A%21225306&AuthKey=AMaX68Y4-fpbXcE

  I looked in the pilot and I have the most up to date, but I was able to solve the problem until the next update by turning on my screensaver and do not allow the HARD drive to sleep.

• Close application when the application switch menu item to invoke

  Hello, I made application for blackberry (os 5,6,7), but it has a strange behavior.

  When I press the switch application menu item, my request is close, so I can't get back to my application once I switched to another application.

  I have replace my onClose to be like this

  public boolean onClose()
  {
  This.Close ();
  Returns true;
  UiApplication.getUiApplication () .requestBackground ();
  getApplication () .requestBackground ();
  Returns true;
  }

  but the problem remains.

  Please help me solve this problem

  When you change your application, the close method is not pushed directly so I think that you look elsewhere this

  Try to use the Application Switch with an application example - say the sample HelloWorld application.  I think he won't, which suggests that the problem is in your application.

  There are three places to look:

  (a) the Application disable method is pressed when the request is sent to the background.  Maybe you have coded it and it closes the application

  (b) you have a certain type of background processing controls (isForeground()) and reacts according to what it finds.

  (c) in the method onObscured() to one of theFields/screen on the display at once.  .

  Other than that, I think you're looking for a general bug in your application.  The starting point is to look at the debugging log when you do this - look for anything from your application you consider odd.

• Permission to hook our thread of the application when the device is locked

  Hi, expert,

  During recent tests, we discovered that if the user doesn't give allow us certain permissions, but instead of fast approval such as permission to phone. When we access api related phone, OS would show a prompt for authorization, which is planned and well if the device is unlocked. However if the device is locked, our code would be hanging there to wait for the user to grant or deny, however, it would occur only when the device is unlocked. If the entire thread is blocked here.

  It's not good for our substantive application. Just wonder how other people solve this problem. In theory, we could avoid these calls if authorization is prompt device is locked, however it is too difficult to identify all the places because that would be a problem for all the permissions (not just permission to phone) and it would be a nightmare to code maintenance.  Another approach is to refuse authorisation every time that approval is fast. Not sure if we could lower the authorization or not. Any other suggestions on this?

  I did some looking on the internet and did not "find any post related.

  Thanks in advance.

  If the user decides to do it is the problem of the user, not yours.

• Can not pass probably for my application when the call is answered

  BlackBerry Bold 9700, v5.0.0.862

  I develop a BlackBerry application and I want the phone to launch my application when an incoming call is * responding *. The code I must do this works intermittently, but it fails as often to succeed. Sometimes you will see my app temporarily for the current call (the screen with the duration of the call, etc.) to appear above it, or sometimes the current call is displayed without my app appearing at all.

  Here is the code I use:

  Welcome on the support forums.

  My guess would be that your application is reliable began, but the phone application is given to the foreground drops.

  You can avoid this by replacing the deactivate method in your application to the foreground application (but don't forget to add the control code, or you can never leave your app without leaving it).

  Notice that the code inside the earpiece of the phone is executed in the phone app. do not sleep or similar here!

  You should also check if your application is already running, and then inform via a global event.

• Cannot find listed as incompatible application when you perform the upgrade to Windows 10

  During Windows installation 10 procees, Commissioner, I have to uninstall driver common utility and Webroot software. I can't find the program or the file called common utility driver. Want support for the file location. Running Windows 7 on Toshiba Satellite A665.

  Go to C:\Program Files and search for all records related to the root Web, and then remove them.

  Also try to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Anyone know the cause of an application with the following event ID error: 1000?

  An error caused the program iTunes on my computer to stop working causing Windows to close.   I found the error in the case where connects and looked up the info listed under properties of the event.   I included the info below.

  Log name: Application
  Source: Application error
  Date: 20/05/2014-12:43:07 AM
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Melanie-PC
  Description:
  Failed application iTunes.exe, version 11.2.0.115, time stamp 0x53755cb7, module AirTrafficHost.dll, version 17.351.6.52, time stamp 0x52fc12ed, exception 0xc0000005, offset error 0x000024a4, process 0x1d30 id code, failed to start the application time 0x01cf73e2c04f2ca1.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      110370
      Application
      Melanie-PC
     
   
   
      iTunes.exe
      11.2.0.115
      53755cb7
      AirTrafficHost.dll
      17.351.6.52
      52fc12ed
      c0000005
      000024a 4
      1 d 30
      01cf73e2c04f2ca1
   
  

  When I clicked on the link to the online help, I got was this:

  Details
  Product:	Windows operating system
  Event ID:	1000
  Source:	Application error
  Version:	5.2
  Symbolic name:	ER_USERCRASH_LOG
  Message:	Failed application %1, version 2 %, failed module 3%. version 4%, fault address 0 x %5.

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Get the name of the caller from an application when the Crier - executing.

  Hi all

  Here, I'll be back with a new problem which goes as follows:

  Suppose that my xyz application stores some contacts (just like in the book addresses/phone book).

  Other contacts are by default stored in my Blackberry address book.

  Suppose I get a call on the handset with my app xyz running in background. All I need is to retrieve the name of the caller of the xyz application and view this name as"Akash Calling... ' instead of '+ 919999999788 calling... ". "assuming that the caller details are present in the said application, his name and none of the details in the actual address book. Is it feasible. If so, please suggest.

  Thanks in advance!

  everything in that this is done incoming call:

  1. you retrieve the number of the caller in the earpiece of the phone

  2. you get the name that corresponds to this number in the background application

  3. you create an entry in address book with this name and number

  After callIncoming is executed, the system call screen is displayed. The phone app checks if it can find the number in the address book. It finds the number and displays the name.

  After that the call is accepted or rejected remove you the address book entry.

• What should I do when the creative cloud displays error code 204?

  I opened creative cloud and it says I have to install updates I click install and it displays the 204 error code what do I do?

  Error 204 https://forums.adobe.com/thread/1492846

• In the Powershell script execution error: could not find the type [ordered]: make sure that the assembly containing this type is loaded.

  People,

  I am trying to load and run the PowerShell script of PowerCLI Module to check the CPU, memory and storage overcommitment. VMware PowerCLI Blog - VMware Blogs but somehow it is always stopped with the error: cannot find the [ordered] type: make sure that the assembly containing this type is loaded.

  Here are some of the diagnostic result:

  $PSVersionTable

  Value name

  ----                           -----

  PSVersion 2.0

  PSCompatibleVersions {1.0, 2.0}

  BuildVersion 6.1.7601.17514

  PSRemotingProtocolVersion 2.1

  WSManStackVersion 2.0

  CLRVersion 4.0.30319.1026

  SerializationVersion 1.1.0.1

  Get-ChildItem ' HKLM:\SOFTWARE\Microsoft\NET frame Setup\NDP'-recurse |

  Get-ItemProperty-name of the EA - 0 Version |

  Where {$_.} PSChildName-match ' ^ (?) (S) \p {L} "} |"

  Select PSChildName, Version

  PSChildName Version

  -----------                       -------

  v2.0.50727 2.0.50727.5420

  3.0.30729.5420 v3.0

  Windows Communication Foundation 3.0.4506.5420

  Windows Presentation Foundation 3.0.6920.5011

  3.5.30729.5420 v3.5

  Customer 4.0.30319

  4.0.30319 full

  Get-PowerCLIVersion

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.8 Release 1 build 2057893

  ---------------

  Versions of the snap

  ---------------

  Build VMWare AutoDeploy PowerCLI component 5.5 1983942

  Build VMWare ImageBuilder PowerCLI component 5.5 1983942

  Build license of VMware PowerCLI component 5.5 1265954

  Build VMware Storage PowerCLI component 5.8 2057894

  Build VDS's VMware PowerCLI component 5.8 2031581

  Build VMware vSphere PowerCLI component 5.8 2031581

  I installed Windows6. 1 -KB2819745- x 64 - MultiPkg.msu to enable Powershell v4.0 on my Windows 7 laptop, but still the script cannot be executed with the above error message.

  Any kind of aid and assistance would be greatly appreciated.

  Thank you

  Hello-

  Ah, yes--it is that review.

  Another option, because you are not able to go to .NET FX 4.5, is to remove the parts "[ordered]' of the code that you use.  This type Accelerator makes the hash table a dictionary sorted.  The effect to remove that from the code will be that the properties of the object that results will not be in the order in which they appear in the code.

  And, another option would be to install PowerShell v3 (the version in which the '[ordered]' feature has been added').  That shouldn't require a FX .NET newer than what you showed as having already installed on this computer.  However, as we have seen with the PSSnapin and PSv4 Exchange, you want to make sure that the PSSnapins / Modules you want to use are compatible with PowerShell v3.

• Error in the workspace when the client attempts to launch an application

  I get the following error when you try to run an application in the workspace.

  Error

  Application manager has encountered an error.
  Please contact customer service and provide the information shown below.

  Message Failed to get the configuration of the application.

  Error code 80180

  Server 127.0.0.1

  Timestamp Fri Apr 05 09:59:58 CDT 2013

  I created this guide for Horizon Application Manager 1.5. It's basically all the same, with the exception of the Horizon Workspace 1.0 replace the Service-goes with the bridge - goes to the place.

• Withdrawal of a MovieClip in a statement when the reactivation of an application.

  Trying to get the code checks to see if a movieclip is present and if it is then remove it when the user leaves (or back) on the application the device (through a phone call, menu press etc.).

  In my application when the user quits the application, they receive the possibility of recovery from the same point or will the first screen.

  If a clip is located on the screen then and the user takes over then it is not a problem.

  If a clip is on the screen and clicked restart this is where the problem occurs and I get an error (or nothing, depending on the encoding options different I tried).

  My goal here is to have the system, find the clip, and remove them when the application is reactivated via the restartF function. Refer to the section of code below.

  • There is no problem when I only have the items blue.
  • There is no problem when I only have items in Blue and green.
  • The problem occurs when the code is in its entirety; Blue, Greenand orange.
  • I get the following error when I click on the restart button:

  TypeError: Error #2007: child parameter must be non-null.

  at flash.display::DisplayObjectContainer/addChild()

  • Made of the anther: all variables for each color are reported in different time periods:
    

  For example:

  Image 1 (this would represent statements in blue)

  var mywordGrumpy:vocabulary_Grumpy = new vocabulary_Grumpy();

  var mywordIncline:vocabulary_incline = new vocabulary_incline();

  I reduced the problem to the restartF function in the code below:

  Item code:

  Adds screen pop - up and request that they would like to resume or restart.

  function onComeBack(event:Event):void

  {

  NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;

  If (! modalW)

  {

  modalW = new ModalW();

  addChild (modalW);

  modalW.x = - 97;

  modalW.y = - 8;

  modalW.resumego.addEventListener (MouseEvent.CLICK, resumeF);

  modalW.restartgo.addEventListener (MouseEvent.CLICK, restartF);

  }

  on the other

  {

  addChild (modalW);

  }

  }

  Triggered by reconnecting and brings the user to where they left.

  function resumeF(e:MouseEvent):void

  {

  removeChild (e.currentTarget.parent);

  gotoAndStop (so.data.currentFrame, so.data.currentSceneName);

  }

  Triggered by restarting and directs the user to the main screen. If statements remove clips if necessary.

  function restartF(e:MouseEvent): void

  {

  If (addChild (myPlayCredits))

  {

  removeChild (myPlayCredits);

  }

  If (addChild (myPlayAbout))

  {

  removeChild (myPlayAbout);

  }

  If (addChild (myPlayAuthor))

  {

  removeChild (myPlayAuthor);

  }

  If (addChild (mywordGrumpy))

  {

  removeChild (mywordGrumpy);

  }

  If (addChild (mywordIncline))

  {

  removeChild (mywordIncline);

  }

  If (addChild (mywordOodles))

  {

  removeChild (mywordOodles);

  }

  removeChild (e.currentTarget.parent);

  gotoAndStop("1","MainScene");

  }

  What I am doing wrong?

  I found the answer:

  Variable declarations were not on the same frame as the fi/statements then. I solved the problem by adding (for each variable):

  var mywordGrumpy:vocabulary_Grumpy = new vocabulary_Grumpy();

  var mywordIncline:vocabulary_incline = new vocabulary_incline();

  var mywordOodles:vocabulary_oodles = new vocabulary_oodles();

  This solves the problem! At the time where variables were called they had not been declared, so they had no value, so the error message.