Incomplete start-up aid. (Catalyst 3560-cg series PD)

Similar Questions

• The switch Catalyst 3560 G Web Interface problem

  Hello

  I have a problem with my switch to Cisco Catalyst 3560 G. The web interface does not work (I tried IE11, IE6, Chrome, Firefox, and Safari).

  There is only displayed icons but no text:

  Cisco.jpg

  

  To try to solve the problem, I have updated the switch to its latest version of IOS (from 12.2 (55) to 12.2 SE7 (55) SE9). But the problem persists

  WS-C3560G-48TS 12.2 SE9 (55) C3560-IPBASEK9-M

  In the configuration, the web server is enabled:
  IP http server
  IP http secure server

  What can I do?

  Thank you

  Best regards
  Fabien

  Hello Fabien,

  I think I found the problem and a workaround for this.

  The problem comes from the language of the webbrowser.

  I got exactly the same problem with the same model with the same version of IOS.

  I checked with the debugging tools in firefox and I find the browser want to get (firefox in french for my case) 2 scripts:

  http:///fr/charset.js

  http:///fr/re_preflight.js

  But there isn't any record of en flash: / C3560...

  So I changed the preferred language in firefox (put English first). Reload the Web page and it works very well ;)

  I hope this will help you

  Thank you

  Jeremy

• Does the Catalyst 3560 support GRE?

  Does the Catalyst 3560 support GRE?

  I know that Catalyst 3750 X GRE, but Catalyst 3750 X cannot work in hardtware it.

  3560 Cataslyst works in the hardware too?

  Please tell me.

  Kind regards

  Takuro

  Hello Takuro san,

  The best way to know about to know a product is to read their notes version + FAQ. It has cisco browser page, a feature that you will give an idea most & would be useful. Here is the link for him

  http://Tools.Cisco.com/ITDIT/CFN/JSP/index.jsp

  Please solve the thread if your question has been answered.

  Thank you

  Vivek

• ESW-520-24 p not able to connect to a Catalyst 3560 G + compatible with SPA942?

  Hi all

  a customer bought an ESW-520-24 p for use in a VoIP project. Today we had difficulties to connect to a switch of 3650 G of catalyst; We tried to set the port to the trunk, general, customer and access and changed all sorts of settings VLAN on the 3560G switch nothing helps: the switches just interconnection used. While sniffing, we saw that the ARP requests are unresponsive even, if something is at a low level, no doubt with VLAN-ing.

  Someone at - it an idea if these switches must be connected between them and if so, what do I do?

  On the other hand; voice turns on VLANS separated and the customer will use SPA942 phones that have an internal switch that allows a PC to connect. I used this call successfully with the Catalyst Express switches and I didn't have to do anything for VLAN-ing, it worked 'out of the box. Can anyone confirm that these phones work with switches for small businesses as well?

  THX!

  Bart

  Hi Bart,.

  I quickly set up the simulation.  It took me more time to write this that actually do the work.

  I grabbed my handy Cisco 3560 catalyst switch.  I plugged port FastEthernet 23 plugged into my UC520.  My Uc520 is my voice system and the DHCP server.

  I have the 24 FastEthernet port connected to my Cisco 3560 in my ESW540 - 24 p.  On 3 of my ESW540 switch port - 24 p, I plugged a phone SPA962...

  I guess that my simulation is close enough to your hardware.  The configuration should be the same I guess.

  Here is the configuration of my Cisco 3560 switch;

  interface FastEthernet0/23

  switchport trunk encapsulation dot1q

  switchport autostate exclude

  switchport mode trunk

  !

  interface FastEthernet0/24

  switchport trunk encapsulation dot1q

  switchport autostate exclude

  switchport mode trunk

  interface Vlan1

  192.168.10.3 IP address 255.255.255.0

  !

  interface Vlan100 (VLAN100 ends on my UC520 and has the DHCP scope)

  no ip address

  !

  interface Vlan200

  no ip address

  !

  Check that the tree covering weight is not blocking the ports of uplink with the command show spanning tree. I ask you to try what I must admit that this uplink to my UC520 was in a BLK State on the VLAN by default.  I HAD TO CORRECT.

  I plugged my phone SPA962 on my ESW switch, it lit.

  VLAN 100 as my voice VLAN, I had to set manually what VLAN the SPA phone will reside in.  Otherwise, it will try to retrieve a default IP VLAN.

  • I have manually by pressing the button (below the button of the envelope) on the phone in the SPA
  • Scroll down and select 'network '.
  • Scroll again option VLAN and select Edit.
  • I changed the setting to select Enable VLAN Yes.
  • Click the OK button.
  • I then scroll down to the option VLAN ID.
  • Choose the edit button to change the VLAN ID information
  • I register 100 to and selected OK.

  My phone has received an IP address from my 100 VLAN address 10.1.1.X.

  Fortunately, the ESW520 has a pretty good GUI, in which case you can add a new vlan and the trunk at all ports.

  Here's an example of how I added the vlan 200 to the ESW switch and started adding the Tagged ports switch ports.  I have to do all the ports where you need a VLAN.

  

  I then as seen below my new adds VLAN as a port Tagged to all ports of the switch.

  You can see from my screenshot below I was adding VLAN 200 to interface G2 as labeled interface.

  

  Don't forget NOT to SAVE YOUR CONFIGURATIONS ON BOTH THE 3560 and the ESW520

  

  hope this helps

  Best regards, Dave

• Windows will not start using fingerprints on Tecra M-series

  When you start windows the fingerprint sensor to recognize and accept my fingerprints, but used to start Windows.

  When you start windows with password, appear on the display with text like "can't find the backup file.

  Try to remove the existing footprint and add a new one, can be done in after recognizing my fingerprint.
  Request password, it does not accept the password because off backup file missing?

  Hello

  It seems that the fingerprint software is unable to find the file where the password was stored why? Who knows?  :|

  The point is that this issue could be related to corrupt or missing files, fingerprints and in most cases reinstalling new software of fingerprints should solve this problem.

  Visit the European of Toshiba driver page, downloaded the new fingerprint software, remove the old applications installed, reboot the laptop and install the new download fingerprint program.

  I think this should help

  Welcome them

• Trunk of SPF VLAN DELL 2724 with Cisco catalyst 3560

  Trying to trunk one VLAN of the 3560 to the 2724 via ports of SPF. The VIRTUAL LAN has been created on the two switches and ports of SPF are also members here. The built-in SPF port tool diagnostic claims everything works, but it is not permanently most. Any help would be greatly apprechiated.

  Here is the cisco information:

  The 3560 is set in transparent mode and should function as a CE router. The SPF here link has the value dot1.q and the VLAN I try to propegate the 2724 is 104.

  Message edited by e0asto on 04/09/2008 03:37
  Message edited by e0asto on 04/09/2008 03:38
  
  

• How to restrict Internet access by using the RADIUS server via switch Catalyst 3560

  Dear all,

  I need a configuration using any. I have a small network of 15 users a 3560, which is in turn connected to a router ISR 2811. Interface fastethernet 0/24 switch 3560 I intend to connect to a unix based server RADIUS. ISP is connected on the opposite side of the 2811 to the fa0/0 interface.

  I want to make is that if someone among the 15 users tries to access the internet, they must be validated in the RADIUS server by their pre-configured user credentials. (I'm going to store 15 user credentials here). If someone else tries to connect (except those 15) he or she should be denied internet access.

  The RADIUS server will be having a login page to type the name of user and password.

  Please guide based on what commands I should inject into the 3560 or what specifically, I need to have to run this task.

  Thanks in advance!

  Samrat.

  I only did this in a very long time, but you probably want to do is activate the web authentication.

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3560/software/release/12-2_52_se/configuration/guide/3560scg/swwebauth.html

• BlackBerry smartphones the 8900: my first Blackberry (start-up aid)

  Hello

  After a long period of research and forum TAPI, bought my first Blackberry.

  A used 8900, but no CD or manual (uh - oh).

  No problem right?  Can download it just.

  Supplied with 5 OS already installed.

  Put my SIM in there, and it seemed good to go.

  On the Blackberry.com website, interpreted the security wipe.

  But want a new start with the Blackberry OS and other software.

  ------------------------------------------------------------------------------------------

  Puzzle #1

  -------------

  -a computer without internet access to be used with the cable USB of Blackberry 8900

  -Blackberry.com ths site, download Blackberry Desktop Software worm 600_b047

  -transferred to a computer with no internet connection via a flash drive

  s ' is stuck on the installation where he tried to download Microsoft Framework 3.5 SP 1

  so...

  -downloaded Microsoft Framework 3.5 SP1 on its own from microsoft.com and installed on the computer with no internet connection via a flash drive

  -tried to Blackberry Desktop Software worm 600_b047 of pleasure, but he always tries to find an internet connection for tail Framework 3.5 SP1.

  -is it a work-by-turn for this?

  ----------------------------------------------------------------------------------------------------------------------------------

  Puzzle #2:

  -------------

  -to install the OS fresh and official and legitimate

  -follow the link on Blackberry.com website to my carrier and downloaded Blackberry worm 4.6.1.378

  -Okay, going to have to downgrade to OS 4.x, but it's ok.

  -After you select what Blackberry OS components must be added/deleted/downgraded, the installation is stuck with the error message:

  "Could not complete the load operation.

  A new version of the Application Loader to load the software system on this device [A:0x0000000B]

  Would be happy with OS 5 or OS 4.x as long as this is a new installation.

  -is it a work-by-turn for this?

  ----------------------------------------------------------------------------------------------------------------------------------

  Please help with this, if you can.

  Excited about the new toy but want a new start.

  Computer with no internet to be used with Blackberry USB operating system: WinXP

  Bless.

  Hiya!

  Now, I don't know any work around the issue of the framework. But what about your operating system. You do not need to downgrade, you can use ANY os 5.0 for your device also suppliers a long time that you remove the SELLER. XML file from your computer.

  If your using a PC, the location of the file of the seller will be there,

  C:\Program Files\Fichiers Research In Motion\Apploader

  If you can go here and download any OS carriers for this device.

  Once you have deleted the file, we the loader.exe to install

• Catalyst 3560 liaison network between two servers ubuntu 12.04

  Hello world

  I'm trying to transfer data with more than 1 Gbit/s between two servers, but I just get a card (approximately 1 Gbps) NETWORK performance. Here is my configuration:

  srvnettest1 and srvnettest2 are two 12.04 servers ubuntu with three network cards in each. management eth0, eth1 and eth2 are network cards that should work as a team. ;-) Here are the relevant parts of fit it:

  [email protected]/* */:~# less /etc/network/interfaces
  ...
  auto bond0
  iface bond0 inet static
  address 172.16.200.100
  netmask 255.255.255.0
  bond-mode 4
  bond-miimon 100
  bond-slaves none
  bond-lacp-rate 1
  bond-primary eth1 eth2
  auto eth1
  allow-bond0 eth1
  iface eth1 inet manual
  bond-master bond0
  auto eth2
  allow-bond0 eth2
  iface eth2 inet manual
  bond-master bond0
  ...
  
  

  
  [email protected]/* */:~# less /etc/network/interfaces
  ...
  auto bond0
  iface bond0 inet static
  address 172.16.200.200
  netmask 255.255.255.0
  bond-mode 4
  bond-miimon 100
  bond-slaves none
  bond-lacp-rate 1
  bond-primary eth1 eth2
  auto eth1
  allow-bond0 eth1
  iface eth1 inet manual
  bond-master bond0
  auto eth2
  allow-bond0 eth2
  iface eth2 inet manual
  bond-master bond0
  ...
  
  

  It's the switch configuration (btw, this is a version of IOS in course WS-C3560G-48TS 12.2 (55) SE)

  Switch#show running-config
  ...
  interface Port-channel10
  switchport access vlan 200
  switchport mode access
  !
  interface Port-channel20
  switchport access vlan 200
  switchport mode access
  !
  interface GigabitEthernet0/1
  switchport access vlan 200
  switchport mode access
  channel-group 10 mode active
  !
  interface GigabitEthernet0/2
  switchport access vlan 200
  switchport mode access
  channel-group 10 mode active
  !
  interface GigabitEthernet0/3
  switchport access vlan 200
  switchport mode access
  channel-group 20 mode active
  !
  interface GigabitEthernet0/4
  switchport access vlan 200
  switchport mode access
  channel-group 20 mode active
  ...
  

  This is my summary etherchannel:

  Switch#show etherchannel summary
  Flags:  D - down        P - bundled in port-channel
  I - stand-alone s - suspended
  H - Hot-standby (LACP only)
  R - Layer3      S - Layer2
  U - in use      f - failed to allocate aggregator
  M - not in use, minimum links not met
  u - unsuitable for bundling
  w - waiting to be aggregated
  d - default port
  Number of channel-groups in use: 2
  Number of aggregators:           2
  Group  Port-channel  Protocol    Ports
  ------+-------------+-----------+-----------------------------------------------
  10     Po10(SU)        LACP      Gi0/1(P)    Gi0/2(P)
  20     Po20(SU)        LACP      Gi0/3(P)    Gi0/4(P)
  

  My test tools are nuttcp (by transfer) and bmon (to watch what is happening during the transfer). Unfortunately, I am not able to transfer more than 1 Gbps:

  [email protected]/* */:~# nuttcp -i1 172.16.200.100
  97.1875 MB /   1.00 sec =  815.2409 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.4763 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.7321 Mbps     0 retrans
  98.1250 MB /   1.00 sec =  823.1001 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.5306 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.7560 Mbps     0 retrans
  98.1250 MB /   1.00 sec =  822.9890 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.6753 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.5528 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.7058 Mbps     0 retrans
  982.5000 MB /  10.03 sec =  821.9606 Mbps 21 %TX 37 %RX 0 retrans 0.32 msRTT
  

  In bmon, I see that a NIC (eth1) of bond0 the uplink and the other a (eth2) made the downlink:

  #   Interface                RX Rate         RX #     TX Rate         TX #
  qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  srvnettest2 (source: local)
  0   lo                         0.00B            0       0.00B            0
  1   eth2                     269.26KiB       4175       0.00B            0
  2   eth1                     123.00B            0     102.56MiB      71030
  3   eth0                     179.00B            2     491.00B            1
  4   bond0                    269.38KiB       4176     102.56MiB      71030
  

  I tried a lot of things, but now I have no idea what to do or what to try next. It is true that I have no deep understanding of Cisco etherchannels yet, so I guess that my mistake is somewhere in the IOS configuration.

  Thanks a lot for your support and welcome to Germany

  Stephan

  Hello Stephan,

  With EtherChannels, a single flow (the flow of images/packages with the same source and destination) is always carried by a single link only. Implementation of Cisco implements not balancing on connections in an EtherChannel load by package, and it avoids a reason: executives could get reorganized, something this plain Ethernet never should do. This means that you will not see an improvement in bandwidth on the speed of a single link to your EtherChannel for a single stream. It is only the overall bandwidth for several stream which increases. The advantage of EtherChannel becomes therefore obvious that if your server starts many conversations and several stream handling.

  Best regards

  Peter

• Newbe to fiber / suggestion Hardware

  I am an administrator of a network of small fiber optic, it consist of 90 computer, some with 1 GB and a few 100 MB fiber. Currently we have 6 AT8016 switches (16-port 100 MB fiber) and we want to replace it with 4 24-port fiber GB switches.

  Doze, someone at - it recommendations of Cisco switches, I can use it.

  Svein salvation,

  I'm trying to understand your condition.

  You need a switch with 24 ports Fibre with 10 GB interface (fibre)?

  If this is the case, you can you a number of choices:

  1 WS-C3560E-12SD has, as in the previous post, 2 X 2 10 Gb and FPS 12 x 1 GB ports.

  2 4928-10GE offers 28 ports of wire-speed Gigabit Ethernet ports (SFP) and two wire-speed 10 Gigabit Ethernet (X 2 optical) fiber.

  3 WS-3560E-12D has 12 X 2 10 GB ports. A 2 X using TwinGig adapter converting two SFP Gigabit Ethernet to 10 Gigabit Ethernet X 2 Interface Interfaces.

  Cisco Catalyst 4928 10 Gigabit Ethernet switch

  http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps6021/ps9903/data_sheet_c78_494757.html

  Switches Cisco Catalyst 3560-E series

  http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps7078/product_data_sheet0900aecd805bac22.html

  The next place is to get a chassis 4500 or 6500 (including overtime) and get the GBIC/SFP cards. Don't know if you want to go this route, because it is not solvent.

  I hope this helps.

• Cisco Catalyst 4503-> Cisco 3560 L3-> Cisco 2960 L2-> Cisco SMB switch

  Hi Experts,

  I am trying to add a Cisco SMB SF300 - 24 Switch to an infrastructure that has only the Cisco Catalyst switches

  The base layer is Cisco Cataylst 4503. Distribution is Cisco Catalyst 3560 and Cisco 2960 switches access layer.

  There are about 30 VLAN present in the infrastructure that is announced to all switches using VTP. Inter VLAN routing takes place at basic switches

  by creating the Interface VLAN for each VLAN of L2.

  1. the new 150 VLAN must be created on the new Cisco SMB switch. If I create a corresponding interface 150 VLAN on core switches, it will forward the other VLANs traffic just as he is currently working for Cisco 2960 Catayst switches?

  2. While they inspected, I could see that the DERIVATIVE is not supported on the Cisco SMB switches and I would need to go GVRP if I need to make advertising information to other switches VLAN. But since GVRP is only supported on CatOS and there is no inter operability between GVRP and DERIVED, I would need to manually create the VLAN on the new switch. Is this correct?

  Help, please!

  Thank you very much

  ANUP

  Good afternoon Anup Sasikumar

  Please use our forum

  My name is Johnnatan I am part of the community of support to small businesses, I saw your post and I understand that you want to configure VTP and GVRP.

  I'm afraid you will have to configure it manually each Vlan in each device CatOS GVRP, in order to keep their databases vlan in sync. As you say, VTP is support it not in CatOS

  You can try to connect the two protocols, but I encourage you do not follow this procedure.

  On your question about intervlan routing, if you create a corresponding interface 150 VLANS on switches to base it is routed, if your configuration is correct (port access, ports of junction, intervlan etc..)

  I hope that you will find this answer useful, if it was satisfactory to you, please indicate the question as answer.

  Please evaluate the useful messages.

  Greetings,

  Johnnatan Rodriguez Miranda.

  Support of Cisco network engineer

• Make a choice of switching - catalyst 500/520/ESW Linksys SRW / SFE

  Hello someone would be able to clarrify please where Cisco takes in what concerns the SMB switching product portfolio that I'm getting a little confussed.

  My estimate that we currently have available that which follows to the SMB market, has decided there is a price difference significant between some of the product lines, but it seems that the choice when choosing a suitable switch fades a bit and starts to go down in price rather than the features and performance characteristics.

  • Cisco Catalyst Express 500 series switches
  • Cisco Catalyst Express 520 series switches
  • Cisco Small Business Pro ESW 500 series switches
  • Cisco Small Business Managed switch (Linksys Business Series)
  • Cisco Small Business Smart switch (Linksys Business Series)
  • Cisco Catalyst 2960 Series switches
  1. Can I ask if there are plans to merge some of the ranges of products like the 500 and 520, which are the two similiarly priced, managed in almost the same way and have the same function defined.
  2. Are there plans for the ESW line replace the Linksys SRW/SFE and Cisco 500/520 existing equivalents?
  3. I would correct assuming the ESW line runs the Code of IOS?

  Any help would be appreciated.

  Concerning

  Mark Rigby

  Mark,

  Big questions.  Thanks for posting.

  1. Yes, you can expect that over time, the ESW 500 series will replace the Catalyst Express series.

  2. There are no plans for the series of ESW 500 replace SRW/SFE switches.  These product families are somewhat overlapping, but intended for different types of SME customers and partners VAR.

  3. you are incorrect in assuming that the ESW is base IOS.  It is not the case.

  The attached PDF provides a comparison of high-level Cisco switches that sell on SMB.

  Thank you

  Florian

• Disk utility 15.0 has no way to stop the first aid

  On OS / X 10.11.4 on a MacBook Pro for mid-2014.   Utility disk 15.0 (1511.3).   But I've noticed this for a while.

  Once I start first aid, disk utility appears a small dialog box modal ["first aid running on '... "] of which there is no evacuation - short to kill the process, unplug the drive, or restart the machine.   This was not the case before an upgrade months ago.

  Since first aid on the large disks, in particular connected by USB 2.0, can take a long time, it's very embarrassing.

  All three exit opportunities (kill, remove, reboot) do not seem to run the risk of leaving the disk in a bad state - which is exactly the thing running first aid is supposed to solve, no question.

  Does anyone have any suggestions?   Or can direct me to the right place to submit a bug report?

  Thank you

  Larry

  Does anyone have any suggestions?   Or can direct me to the right place to submit a bug report?

  Feedback: Apple http://www.apple.com/feedback/

  Bug Reporter https://bugreport.apple.com/

  Hope this helps Larry

• To apply a Cisco 3560 Switch in my network

  Can someone help me to solve my problem?

  I have a Cisco switch catalyst 3560 that I need to implement in my network and I want to do is to have 3 different VLANS created and use them to separate and test.

  Is it possible to do only a single switch?

  Hello

  It is a community of user to user of Toshiba.

  I put t know how your problem is connected to a Toshiba laptop, but if you have problems with the Cisco product, I recommend you visit the support page for Cisco to get support for this device.

• Cannot start Satellite U300-112

  I have a Toshiba Satellite U300-112, which I can t start more... the last time I used it was 2 days ago and everything worked fine.
  I didn t and hard - or software changes and it shut down properly as usual.
  When I started the laptop today, it gave me an error message telling me to use the start-up aid that did not help either... He just said windows can repair this computer automatically.

  Diagnostic details didn t detects an error, and when I do a hollow of the options advanced system restore it doesn t work either...
  Can someone tell me how to solve this problem?
  I use windows Vista btw!

  Hello

  I assume that you are not able to start using the F8 key.
  Usually a start menu should appear who would be you can repair the laptop or to run a HARD drive recovery procedure (only if HARD drive recovery is supported on this laptop).

  If your mobile phone does not support recovery of HARD drive, then you will need a Toshiba drive.

  In this case, you will need to take the Toshiba Vista recovery disk and need to retrieve the laptop everything again.