Incorrect display space
Wrote 426 GB and 299 GB of programs. but my laptop doesn't have a month and I have not had time to download many programs. I have about 6 small programs. What should I do? Thank you very much
MacBook Pro 15 inch 2015 screen Retina 512 GB SSD. Look at the used storage space! is 72 GB. But my mac show me 299 gb of Apps. (OmniDiskSweeper)
Tags: Mac OS & System Software
Similar Questions
-
gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches
When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.
It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...
Appreciate any help on this
Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support
-
My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?
My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?
Hello dipudivakar,
Thank you for using communities Support from Apple!
From your post, I understand that your iPhone displays a percentage of the battery which is incorrect. To resolve this situation, I would first of all turn off the option to display the percentage of the battery on your iPhone. If you need information about how to disable this feature, the following article explains this process.
Display the percentage of the battery on your iPhone or iPad - Apple Support
After you have enabled this feature, please reboot your iPhone by following the instructions in the next section.
Restart your iPhone, iPad or iPod touch - Apple Support
Once finished, restart, enable the option to redisplay the percentage of your battery and test the question.
See you soon!
-
Every time when you open the document in Adobe reader, it will open 'tools' (export - life - pdf, pdf, pdf - luo - etc.). Every time I have to manually turn this off. How I can inhibit this tool? I don't really want to, and he stole my display space. How to inhibit?
I have little display and allways this "life pdf", 'luo pdf', 'pdf-tiedostoa muokkaa', 'commentary', etc. appear. How I can inhibit this junktool?
Go in Edition > Preferences > Documents and uncheck "Open tools for each document pane.
-
vSphere: incorrect display of ability Datastore
Hello
Today, a store of data in our virtual environment have a strange problem: incorrect display of ability in view vSphere Client. The correct capacity of the data store is 150 GB normally, but now I see it display 2126950.00TB (?). This issue of data store result in the failure of all virtual machines ran on that. I even worry about this issue because I am facing both of the fist. Please help me!
Thank you
This KB is probably can help you: VMware KB: 5.0 ESXi hosts fail to mount VMFS5 volumes that are formatted with TTY capabilities only.
--
-
Thunderbird Inbox date of 1 addresses incorrect display. This can be corrected?
I have a person whose e-mail address is plus.com where the date displayed in the Inbox of Thunderbird is still wrong. correct date: 09/04/14 is displayed as 01-08-06.
I checked in Windows Mail and Gmail where the date is displayed correctly.
Thanks for the information I requested.
After reviewing, I see the Date: header is the one with the wrong date: Date: Tuesday August 1st, 2006 06:03:52 + 0100. It is usually sent to the system time. All other date headers (envoys:, :) received are correct and match servers to send/receive.)
I suspect that your friend date / time may be incorrect. Can you ask them to double check?
It seems also Thunderbird displays or uses this date when it displays a message.
You can change it to view > sort by > Order Received and also add a new column in the messages pane, as shown in the attached screenshot.
Perhaps the IMAP received date could also help to work around this problem, if the date of such receipt displayed in the columns of the message pane turns out to be incorrect.
As usual, before going further and try what it is, Please make a backup of your profile. Is that what I mentioned a backup would be ideal? Oh and Please make a backup of your profile.
-
I have my set Favorites in a HTML file that is my home page. These bookmarks are categorized. This is how they would be displayed in Firefox 3...
Category
Bookmark 1 Bookmark 2
This is how they appear in Firefox 7...
Category
Bookmark 1
Bookmark2How can I make Firefox 7 show the leading spaces?
You must add the CSS code to restore the indentation used in the previous version of Firefox.
Firefox 4 and then treat the DT element differently and that causes a weird CSS rule (dl > dl) not applied.
- Resource://GRE-resources/quirk.CSS on line 220
Use it in Firefox 4 and later versions:
<style> dl > dt > dl { display: block; -moz-margin-start: 40px; } </style>
-
User account incorrect displayed on the logon screen
OT: Displayed Incorrect user account
Hi all
When you switch on my laptop, instead of my list of normal user account, the screen displays the message "incorrect username and password" - OK.
If I select OK, a profile of incorrect user account appears. Strangely although perhaps, the specified user name, actually part of my email address?
I tried to enter all kinds of passwords relevant to me, but of course, who are rejected and I went back to 'bad user' - However, if I then click on the option "change user", then get a screen showing both my own correct profile, right next to the bad. By selecting the correct account, then I can access my homescreen, as usual. I go to the user account page, expecting to remove "rogue" account, as you would with a guest account - for example - but - hey - he's not here, not anywhere for me to remove I can not just simply get rid of it. OK - this is something I can live with - but it's so boring, Forums, so far, failed to help. Experts or skilled geeks out there? I am running Vista Home Premium + SP2.
Thank you.Hi silverfox,.
You have made no changes to the computer before the broadcast took place?
Method 1
Try the following steps:
a. click on start
b. type the three letters cmd in the search box, and then click OK.
c. Enter the following command and press ENTER:Control userpasswords2
d. click your account name.
e. uncheck the box that requires users to enter a password.
f. click OK.
g. When prompted, enter your password.Method 2
Follow these steps and check if that helps:
a. Click Start, type regedit.exe in the start search box and press ENTER.
b. open the registry at:
HKLM\Software\Microsoft\WindowsNT\CurretnVersion\winlogon
b. Add a new string value called AutoAdminLogon and set the value to 1
c. Add a new string value called DefaultPassword entry and set its value to the password for the user indicated in DefaultUserNameNote: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registryMethod 3
Check to see if the same problem persists in safe mode.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeAdditional information:
The Windows password problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Windows-password-problemsMicrosoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126 -
Incorrect disk space: Windows 7 Ultimate
Hello
I have Windows 7 ultimate and for some reason any my disk space incorrectly reports. I did not all related things updated level or record...I ran a number of different things. As the following which have been recommended by MicrosoftMethod 1:
Run Check Disk to examine if there are any errors on the hard drive.
Check a drive for errors
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
Method 2:
Perform clean up to free disk space occupied by unwanted system files.
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
Method 3:
Open the troubleshooting of System Maintenance Utility
http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter
Diagnose and repair Windows files and folders problems automatically
http://support.Microsoft.com/mats/windows_file_and_folder_diag/
Here are a few screenshots. My drive is a SSD 240 GBThis is the size of the trees and watch 138.9 GB used.I did CHKDSK and here are the results:Windows has checked the file system and not found any problems.
234324991 KB total disk space.
143808224 KB in 336323 files.
169248 Ko 44968 index.
0 KB in bad sectors.
518551 KB in use by the system.
65536 KB occupied by the log file.
89828968 KB available on disk.
Any comments would be greatly appreciated!
Thank you
Brian
Very understand what the problem was. It's rollback Rx PC. A frustrating experience... Thank you all for the comments.
-
Hi all
Recently, we encountered a non usual problem with restarting the database because of the ORA-27063
number of bytes read or written is
incorrect #IBM AIX RISC System/6000 error: 28: no space is available on the device.
Database version: 11.2.0.4
Type of system: SAP database
Computer type: AIX
When the investigation we found the full systems 100% file where resided temporary files. So to solve it, we simply added tempfiles on other file systems.
My question is why the db restarted. As far as I know the TEMP tablespace will throw an error (unable to extend TEMP of 128 segment in tablespace TEMP) every time that
There is no free space.
Secondly, to avoid the above, that we began to find the TEMP files from file systems and if found 90% and above then began adding space on all the production servers to avoid
reoccurance of this issue. Is - this recommended...?
Thank you
Hello
It can be consider as an alternative (using a cron task) or if you watch in em12c could control, so you can host some metrics to check temp space.
Now, one last thing to consider, it is not advisable to go to increase temp (to be honest, we need optimize queries, why won't they are eating take so much space)
Third step, you can put a profile (limit) so much space is used, then kill the session so that they eat no place (so that db will not get crashed at least... only session will be started - we can very well with that, instead of hammering db)
-Pavan Kumar N
-
LiveCycle es2
Acrobat X
Object = text field
Pattern button, display tab
View with asterisk poster space model. Asterisk need to actually display, NO space. Display pattern = text {* 999999999 *}
Taken from all hair out 2 weeks... Thank you
Goal: display user input in formfield * input * their output in the text box linked to the format with code 39 barcode fonts
Now, the user must type *, 1 and the last character @. Try to make sure I don't have to depend on the user at the keyboard *.
I can write javascript if necessary, just can not know what to write?
do not take into account, finally got lucky. no hair left.
It works: text {'* '999999999' *'}
-
LiveCycle es2
Acrobat X
Object = text field
Pattern button, display tab
View with asterisk poster space model. Asterisk need to actually display, NO space. Display pattern = text {* 999999999 *}
Taken from all hair out 2 weeks... Thank you
Goal: display user input in formfield * input * their output in the text box linked to the format with code 39 barcode fonts
Now, the user must type *, 1 and the last character @. Try to make sure I don't have to depend on the user at the keyboard *.
I can write javascript if necessary, just can not know what to write?
do not take into account, finally got lucky. no hair left.
It works: text {'* '999999999' *'}
-
Hovering above the markers is the incorrect display of ToolTips
Had an accident and since, when I hover over a marker to see the ToolTip, they display incorrect information. Sequence markers show random clip marker info.
I cleaned my the media cache database. Are there all other caches I could delete this reset? Other thoughts?
I had also developed a problem where I couldn't drag the elements around in the project bin. Figured it out: damaged window layout. Delete the layout and created a new. All good now.
-
Color incorrect display within work, exit right &; saveforweb
CS4 (also happens on CS3 however) running on Windows XP. 2x2gb DDR2 Ram. A lot of disk space.
I reinstalled CS4, even tried to go back to CS3 (used own tool each time) and this still remains... confusing!
Specifically, my blues are appearing to be more purple... but it is only in my workspace. When I saveforweb preview that shows is the normal color of true of the image... Goes the same for ANY type of output recorded... so I know that it is a problem of how it is the PS display only.
Here is a screenshot showing the workspace color vs the real color shown in the saveforweb:
So, if saveforweb knows what he's doing... Why not my workspace? Why the diff color?
All calibration PS works on values of reference standard sRGB color space. If you assign a different monitor profile, there will be a difference in the values stored in the profile compared to 'neutral' values and PS compensates by adjusting your colors. That's why you have seen the hue - a simulation of the result not calibrated on a sRGB monitor. If you assign the profile sRGB to your monitor, of course, there is no difference anymore, even not calibrated to see the result. In this regard, the behavior of the PS has not changed. He is correct in both cases. In any case, for the content that it's kind of a moot point - web it will always assume sRGB and while some browsers are colour conscious profiel, this feature is rarely used.
Mylenium
-
Incorrect display of web pages
This is a problem not intentionally that comes and goes. I think it might be related to updates that are hunted. On my boxes linux (Xubuntu 12.04 with all the updates and patches), Firefox suddenly starts displaying all the pages as text only. I rebooted my machine without modification. I also uninstalled Firefox and all the configuration files and reinstalled without effect. The only add-on is shockwave 11.2.220. I disabled that and no luck. Does anyone know if there is another element of mystery to be uninstalled / reinstalled to get web pages to display normally? Are there additional measures beyond apt - get autoremove firefox that cleans up really really what is the cause? Any other suggestions?
Good job. For others with the same problem, please report
your last post as solved problem.Calculation of the happy.
Maybe you are looking for
-
How to set the options on the tab to open new tabs always like a blank page?
Hello everyone. I installed a translation program (Babylon), and during this time I already uninstalled. But since then, create a new tab, every time, it opens with the Babylon search engine. How can I remove this? I already checked the options on th
-
Remote access Windows Server 2012 through internet with desktop connection
Summer messing about with it for days and don't get no love. Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home. Tried all these steps f
-
I got the upgrade for the free update to Windows 10 on my laptop and restarting the first time I noticed that all the icons and background were gone, and the only thing on the black screen was my Advanced System Care Pro Performance Monitor that is a
-
LaserJet 4050 TN: Error LaserJet 4050 TN PCL XL
This printer is amazing, but three days ago, I tried to print a PDF Online and since I try to print this file, the printer randomly prints a page with this error: PCL XL error Error: InsufficientMemory Operator: Paintpath Position: 173671 Steps I too
-
Problem in the rebuilding of the Windows Media Player library
I got to the step where you delete the files in the current library. I have a large file that will not delete because it says that the "action is not possible because the file, the file is opened on the server of SBE. I have no idea what it is, whe