Incorrect hard drive size

Similar Questions

• Is it possible to analyze infrastructure were returned by the device of scanning the hard drive size/capacity

  Is it possible to analyze infrastructure were returned by the device of scanning the hard drive size/capacity

  Well, Foglight can certainly, as indicated above, Robert fired in a mode without agent disc information.

• Satellite Pro L300 - new partition after Exchange of HARD drive sizes

  Under 'Vista' with a 120 GB hard drive and needs space.

  Bought a 500 GB SATA drive. I'm afraid that the recovery software will set the new drive with a 50-50 Partition. This is the case or it will allocate 50 GB to E: / and the rest to C: /?

  As the manual States that if I change the size of the partition the recovery software will not re - install in the future?

  Hello

  As I know the Toshiba Recovery disk always allocates 50% disk space for each partition. This means that the 500 GB drive you have two partitions with ~ 250 GB of disk space on each partition.
  If not or you want to change something, you can use the Windows disk management tool:
  http://APS2.toshiba-tro.de/KB0/TSB7101OB0006R01.htm

  I think the manual means that you can use t more the procedure for recovery of HARD disk if you change the size of the partition.
  But with the Toshiba disk recovery you are on the safe side and so you can always restore the factory settings every time. :)

• HARD drive size should I use with Satellite 1800 504?

  What size of hard drive can I install on this laptop?
  One installed is only 15 GB.

  You can use the 30 GB HARD drive. For example, Toshiba HDD2159B.

  Good bye

• Satellite 1700-400: maximum hard drive size!

  Hello

  A late response.
  A half year ago, I asked about the maximum size hard drive for the Satellite 1700-400
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17328

  Originally it is a 10 GB HARD drive, but now there are no more small hard drive available, so I bought a 80 GB
  and it works perfectly. :)

  grobi Oxford

  Hi grobi

  Thanks for sharing this info with us. It of always good to know what's possible and what's not. Thank you once again ;)

• Maximum HARD drive size on a Satellite 1110-Z16

  Hello!

  What is the size of the disk HARD Maxx in a Satellite-Z16 1110?
  Is it possible to install a 120Gig Hdd(2,5")?
  Is there a description for 1, 50-TRAD Bios Update?

  Hello

  I don t think that this laptop and the BIOS will recognize 120 GB HARD drive.
  According to some information in the internet, the phone supports up to 40 GB HARD drive.
  The problem is that Toshiba does not have official information about the sizes of disk HARD max.
  It seems that you have to test

  For BIOS update checks please this document:
  How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine?
  http://support.toshiba-tro.de/KB0/TSB4A00SD000BR01.htm

• Help a fool please ~ deleted partition, lost the hard drive size

  I'll try my best to make this as clear as possible, thank you for your time...

  Received my free copy of windows 7 home Premium

  Wanted a clean install (not an upgrade)

  Back up all the data and the programs that I installed

  During the installation of win 7, I deleted the recovery of the system partition and the 2nd partition of my HARD disk (has been labeled d, came that sort of lenovo factory, had 70 GB size I think)

  I thought that if I deleted the partition of the hard drive space would be added to the 1st partition and it did not

  Have materialized with the installation of win 7, and now I just have never found my C: and the GBs of the 2nd old partition so its as if I lowered my total HARD disk size

  How can I get my C: to have all of the 320 GB? Thanks for any advice!

  You can allocate the unused disk space as follows.

  Start > run > diskmgmt.msc

  Right-click on the Windows partition [should be C] and click on "expand". Extend partition as needed and enjoy.

• RT - etspc - hard drive (size)

  Hello

  I created my goal of RT on an old computer, which meets the requirements of the document

  http://zone.NI.com/DevZone/CDA/tut/p/ID/8239?OpenDocument

  and everything works fine with LabView RT 8.6.

  Now, I'm going to prepare a new goal of RT with LabView RT 8.6 on a new computer. I found already all components required are compatible, but I struggle to find (buy) a hard drive with the size smaller than 126 Go with respect to this document.

  Might be possible to buy a 250 GB HDD and diveded small partitions?

  Or should I take an old hard drive for example from an old computer, which has the corresponding size.

  Thank you

  Hi zial24,

  LV in real-time is not supported RAID.

  We studied actually add RAID in LabVIEW Real-time several times, but the question that comes up every time is that most RAID controllers are owners and require the development of drivers for each of them, otherwise we would have to apply or our own solutions software RAID mainly only the port.  We prefer to work with a single hardware RAID where the RAID controller would manage disks and provide an interface of type SATA usable by the operating system.  Offers of products that we (as in NOR) for PXI include PXI-8260, but this product is a software management JBOD (Just a Bunch Of Disks) and isn't really a "RAID", since there is no fault tolerance (e.g. mirroring, parity, etc...).  Additional offers in the PXI-8162/3/4/5 require an external rack mount configuration, but are still software RAID0 configuration, not better than JBOD RAID except that they take over striping without parity (which is almost impossible to recover from if a disk fails).

• Hard drive size and the RAM with Labview 2009

  Hello

  I need to know please, how can I get the HDD of the hole size and the size of free hard drive using LabVIEW.

  Same for the RAM: size of free space and hole size.

  Kind regards

  Take a look at this example (and the thread):

  http://forums.NI.com/T5/LabVIEW/size-of-RAM/m-p/63942#M39616

• Envy 17 t J000 - maximum hard drive size and speed

  I'm going to put a 2nd hard drive into the open space in my Envy 17 t-j000.

  The States of Maintenance and Service Guide;

  Hard drives Supports 6.35 cm (2.5 in.) 9.5 mm hard disks (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)

  Customer-accessible

  Serial ATA

  Supports the following drives:

  ● 1 TB 5400 RPM, 9.5 mm

  ● 750 GB 5400 RPM 9.5 mm

  ● 500 GB 5400 RPM 9.5 mm and 7.0 mm

  Configurations to two hard disks:

  ● 2 TB: (1 TB 5400 RPM x 2)

  ● 1500GO: (750 GB 5400 RPM x 2)

  This seems to mean that I cannot use a single hard drive 2 TB 2 and cannot use a 7200 RPM drive.

  Is this correct? Bios denominator do not allow more than a drive of 1 TB or the 7200 RPM?

  CouldI partition just the 2nd 2-1 TB disk?

  Or the manual simply means that the standard unit of HP is not provided with larger than these sizes and I could actually use a 2 TB in the Bay of 2nd?

  It's the last... the list says just what HP sale: it does not describe a limitation of the system. However, I do not think that yet, the market offers a 2 TB drive that fits the available space. 2 TB 2.5-inch SATA drives I've seen are too thick. 7200 rpm or hybrid SSD; No problem.

  To add a second drive you'll need a second hard drive enclosure and cable.

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP p6 2317 c: what is the largest hard drive size allowed in Hp PC 2317c?

  Hello

  I recently discovered that my Hp p6 2317 c has the apparent limits of only have space for a hard drive!

  If this is the case, then what is the size of the largest hard dive that I can add to this computer?

  Is it possible to add another hard drive, for a total of two drives? Y at - it a 3rd party

  MOD chassis that would, with out having to remove the dvd drive?

  I'm afraid that I have to add a new hd and transfer all the data on the originals to the new!

  Thanks for your replies!

  Hello

  Your machine has no place to add more HARD drive

  http://support.HP.com/us-en/document/c03500805

  1 existing TB is huge, but if you wish you can use 2 TB or move data files on external hard drive.

  Kind regards.

• Maximum HARD drive size in a ThinkCentre M52 8113

  Hello.

  First of all, I'm sorry that my English is not good.

  I need to change my ThinKCentre HARD drive. It comes with a SATA HDD, size: 80Gb and I want to put a larger HARD drive. What is the maximum size allowed by the BIOS? ¿Does, it supports a SATA2 HARD disk?

  Thank you

  Mauricio

  I have 320 GB and 640 GB HARD drive in my 8113 M52 and it works fine.  The site says Intel 945 chipset used in the 8113 provides a SATA II interface.  My HARD drives are also SATA II.

  I've updated the BIOS using the download on the Lenovo support site.

  Larry Lobdell

• Get a VM hard drives size

  Hello!

  I am trying to retrieve information about hard disks and storage of a VirtualMachine details.

  I get what I need using vm.getStorage () .getPerDatastoreUsage (); but unfortunately, the getStorage method does not work for older versions of Virtual Center (I get an exception caused by InvalidProperty).

  Is there another way I can get the size of the virtual disks to a virtual machine?

  For example, it would be enough to have something like the cmdlet Get-hard drive you can use with PowerCLI...

  Thank you very much!

  Filippo

  You can enumerate all the devices in the virtual machine. For each device, check if it is a hard drive and find the size.

  HTH,

  -Mani.

• Increasing hard drive size of problem

  Hello

  I am trying to increase the size of the hard disk of the virtual machine in vSphere, but the option for all the drives are grayed out on a server specific (all other servers work very well and seem to have the same configuration).

  Is there a list of parameters, that I can use to determine why it is grayed out?

  The ones I know:

  -There are no snapshots on virtual machine

  -The SCSI controller is a LSI Logic SAS (I know that you can't increase with an IDE controller/drive)

  -All hard drives are thick provisioned

  What else could be?

  We use vCenter 4.1 and ESXi 4.1. The VM version is 7, Windows Server 2008R2.

  Thanks for any help,

  David.

  Just to be safe. How to check that there are no snapshots on the VM? Using the Snapshot Manager or by checking the vmdk file name in parameters of the HARD disk of the virtual machine or by examining the data store? Sometimes the Snapshot Manager shows not all snapshots (especially when the backup software is in use).

  Please open the browser of data store and double check there is no - 00000x.vmdk files.

  André

  PS: If you find the snapshot files in the data store Navigator, open the snapshot to the virtual machine Manager, create a new snapshot, and then select 'Delete All' which will merge/delete all snapshots, appears in the Snapshot Manager or not.

• TouchSmart pc610-1130y: replacement hard drive size

  I bought a 1 t hard drive for my touchsmart 610. It was originally 750Go. Will this work?

  Hello

  Yes, 1 TB or more (capacity) will work.

  Kind regards.